COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。     

Synthesis of a Polyaminopolycarboxylic Acid and Fluorescence of Tb~(3 ) Complexes in Aqueous Solution

ＳｙｎｔｈｅｓｉｓｏｆａＰｏｌｙａｍｉｎｏｐｏｌｙｃａｒｂｏｘｙｌｉｃＡｃｉｄａｎｄＦｌｕｏｒｅｓｃｅｎｃｅｏｆＴｂ３＋ＣｏｍｐｌｅｘｅｓｉｎＡｑｕｅｏｕｓＳｏｌｕｔｉｏｎＧｏｎｇＭｅｎｇｌｉａｎ（龚孟濂），ＷｕＷｅｉｎｉｎｇ（吴炜宁），ＳｈｉＨｕ...     

A technique for extracting physiological parameters and therequired input function simultaneously from PET image measurements:theory and simulation study

Positron emission tomography (PET) is an important tool for enabling quantification of human brain function. However, quantitative studies using tracer kinetic modeling require the measurement of the tracer time-activity curve in plasma (PTAC) as the model input function. It is widely believed that the insertion of arterial lines and the subsequent collection and processing of the biomedical signal sampled from the arterial blood are not compatible with the practice of clinical PET, as it is invasive and exposes personnel to the risks associated with the handling of patient blood and radiation dose. Therefore, it is of interest to develop practical noninvasive measurement techniques for tracer kinetic modeling with PET. In this paper, a technique is proposed to extract the input function together with the physiological parameters from the brain dynamic images alone. The identifiability of this method is tested rigorously by using Monte Carlo simulation. The results show that the proposed method is able to quantify all the required parameters by using the information obtained from two or more regions of interest (ROIs) with very different dynamics in the PET dynamic images. There is no significant improvement in parameter estimation for the local cerebral metabolic rate of glucose (LCMRGlc) if there are more than three ROIs. The proposed method can provide very reliable estimation of LCMRGlc, which is our primary interest in this study     

A study of impact toughness of Fe-Cr-X damping alloys

A study was carried out on the impact toughness of Fe- Cr- Х damping alloys. Two measures proved to be effective in improving impact toughness. One was to lower carbon plus nitrogen content to an ultra- low level. This method is suitable for single- phase ferrite alloy. The other is to use dual- phase damping alloys. The presence of martensite in Fe- Cr- Х alloys can enhance impact toughness remarkably, but lower damping capacity drastically. This shows the importance of achieving balance between mechanical prop-erties and damping capacity by properly controlling martensite volume fraction in dual- phase alloys.     

深井重泥浆弱凝胶工艺技术初探

重泥浆强凝胶体系对钴井会产生不利影响。笔者结合川东地区的实际情况,分析了重泥浆强凝胶形成的原因和重泥浆弱凝胶的形成机制,提出了形成重泥浆弱凝胶体系的核心和设计原则,总结出了一套以正确使用泥浆添加剂并配合强有力的固控措施为主的成套深井重泥浆弱凝胶工艺技术,介绍了这套技术在川东地区的应用情况。实践证明,少用甚至不用泥浆降粘剂就可获得并维持尽可能低的静切力,使τ_s,10s为0.5—6Pα、τ_s,10min为2—12.5Pα。     

Deoxyribonucleic acid vaccines encoding antigens with rapid proteasome-dependent degradation are highly efficient inducers of cytolytic T lymphocytes

We generated plasmid expression vectors encoding ubiquitin and beta-galactosidase (beta-gal) with different intervening amino acids, allowing for the production of processed protein products that have either stabilizing or destabilizing residues at their N-termini. P815 cells transfected with plasmids encoding beta-gal with a destabilizing N-terminus did not have detectable expression beta-gal unless they were treated with inhibitors specific for the proteasome. Inhibitors of other proteolysis pathways had no such effect. Nevertheless, transfectants expressing beta-gal with different amino acid residues were equally sensitive to cytolysis by a CTL clone specific for a beta-gal peptide presented in the context of H-2Ld. In contrast to vectors encoding native beta-gal, plasmid vectors encoding beta-gal with a destabilizing residue did not induce detectable anti-beta-gal Abs when injected into skeletal muscle of BALB/c mice. However, such vectors were significantly more effective than vectors encoding native beta-gal or beta-gal with a stabilizing residue in stimulating CTL specific for P13.2, a lacZ transfectant of P815. We conclude that incorporation of strategies that enhance proteasome-dependent degradation may generate DNA vaccines that are more effective in inducing cellular immunity against targeted Ags.     

Extraction of halide quaternary salts in an organic solvent/water system: Hydrodynamics and mass transfer

The hydrodynamic characteristics and mass transfers of halide quaternary salts between two immiscible phases in a stirred membrane permeation cell were investigated. The concentration of quaternary salt, temperature, solvent and the four kinds of halide quaternary salts were evaluated to achieve the extractive optimum condition. The diffusivity, overall mass‐transfer coefficients and individual mass‐transfer coefficients were determined and correlated in terms of the conventional Sh‐Re‐Sc relationship. The transfer time of quaternary salts across the membrane and the thickness of the hydrodynamic diffusion boundary layer were determined as well, so as to characterize the extractive phenomenon of quaternary salts between the two phases that is useful in phase‐transfer catalysis.     

对数型产量衰减曲线方程的建立与应用

在产量衰减曲线方程的基础上，通过数学推导，得到了一种对数型产量减曲线方程。方程既可以用来预测油气田整个开发阶段的指标，又可以比较准确的测算油气田的可采集量。对国内外一些油田的实际应用表明，对数型产量衰减曲线方程是十分实用和有效的。     

High-power 980-nm AlGaAs/InGaAs strained quantum-well laser grown by OMVPE

High-power lattice-strained AlGaAs/InGaAs graded index separate-confinement heterostructure (GRINSCH) quantum-well lasers emitting at a 980-nm wavelength have been grown by organometallic vapor phase epitaxy (OMVPE) and fabricated with a self-aligned ridge-waveguide structure. Using a 3- mu m-wide and 750- mu m-long AR-HR coated laser, 30 mV of optical power was coupled into optical fibers with 28.6% efficiency. A dominating single-lobe far-field radiation pattern was obtained from a wedge-shaped ridge-waveguide laser for output power as high as 240 mW with a maximum output power of 310 mW.<>     

高性能2.5Gb／s用的DFB—LD／EA单片集成器件

报导了采用全ＭＯＣＶＤ生长的１．５５μｍ的单片集成ＤＦＢ＝ＬＤ／ＥＡ组件的 在ＤＷＤＭ系统上的传输测试结果，出纤功率Ｐｆ≥２．５ｍＷ＠Ｉｆ＝７５ｍＡ，边模抑制比ＳＭＳＲ〉３５ｄＢ，调制器反向偏压为２．５Ｖ时的消光比为１４ｄＢ，该发射模块在２．５Ｇｂ／ｓＤＷＤＭ系统上进行了传输试验，传输２４０Ｋｍ后无误码，其通道代价≤１ｄＢ＠ＢＥＲ＝１０＾－１２。