Innovation and Practice of Parallel Dual mode Slurry/EPB Shield Construction Technology and Freezing Cutterhead Opening Technology（并联式泥水/土压双模式盾构施工技术与冷冻刀盘开舱技术的创新与实践）

Two major concerns have been drawn in the process of shield construction: one is the difficulty in selecting a shield machine; the other is the high risk of opening for cutterhead changing. Based on the existing shield systems, a parallel dual mode shield with freezing cutterhead is developed by optimising internal structure and equipment and carrying the freezing device. The dual mode shield construction technology and freezing cutterhead technology are successfully carried out on project cases including Guangzhou Metro Line 9, Guangzhou Metro Line 21 and 220 kV Shijing Huanxi Electric Tunnel (Xiwan Road Shisha Road Section). The parallel dual mode slurry/EPB shield not only has the functions and advantages of slurry shield and EPB shield but also can switch into slurry/EPB mode for different strata and environments easily. Thus, it can achieve rapid shield tunneling. By combining the shield with the freezing system, the soil around cutterhead can be frozen to provide conditions for chamber opening under atmospheric condition. Meanwhile, it is also compatible with dual mode shield.     

圆形钢筋混凝土桩局部破除后抗弯能力计算及应用

深基坑工程中常常出现围护桩成桩垂直度偏差以致侵入主体结构限界的现象，为保证后续主体结构尺寸符合要求，需要对侵限部位进行凿除，进而导致其抗弯承载能力下降。针对圆截面桩体局部凿除后的抗弯承载能力计算问题，基于二次逼近法，建立圆形钢筋混凝土桩局部破除后正截面抗弯承载能力计算方法，结合实际工程分析围护桩局部破除后对基坑围护结构体系的安全性影响。结果表明： 桩身局部破除后，纵向受力钢筋切断和桩身截面面积的减小将导致桩身正截面抗弯能力快速下降；依托工程中800 mm 的围护桩，凿除18 cm 厚度（含切断6根主筋）后，其正截面抗弯能力下降至原设计值的55%，剩余承载力已不能满足安全支护的要求，需进行加固处理。     

隧道爆破信号主分量特征提取与毫秒延期识别研究

为了准确揭示隧道爆破振动信号所包含的反映爆破特征参数的重要信息，通过EMD分解与交叉小波变换组合分析方法对实测爆破信号进行分析，得到各分量与原信号的相关性系数，从而准确判别出信号的主分量。再依据相关性系数对包含主分量在内的相关分量重组并进行Hilbert变换取模值，精确识别出隧道采用的各段别雷管的毫秒延期时间。结果表明： 组合方法确定的主分量及相关分量重组信号能够突出爆破信号的主要特征，对隧道爆破信号的分析效果好。     

Innovation and Future Application of Mechanized and Intelligentized Construction Technology for High speed Railway Tunnels: A CaseStudy of Hubei Section on Zhengzhou Wanzhou High speed Railway（高速铁路隧道机械化修建技术创新与智能化建造展望——以郑万高速铁路湖北段为例）

To ensure the safe, rapid and high quality construction of Zhengzhou Wanzhou High speed Railway, a series of exploration and innovation of construction technology, structural design and information management under the condition of large scale mechanization is used in the whole construction process. The technology includes: （1）A set of advanced geological prediction, advanced pre reinforcement technology of excavation face, mechanized construction technology of primary support, wide waterproof board trolley operation technology and intelligentized full face lining trolley of large scale mechanized construction technology are formed. （2）A classification method of surrounding rock stability is established based on the mechanized construction technology, and the design parameters of the tunnel support structure are optimized under the guidance of New Austria Tunneling Method. （3）To realize informatized management of tunnel construction, the tunnel construction management system, construction information record system, construction safety management system, quality management system of concrete mixing station and quality credit evaluation system are established. Finally, on the basis of mechanized and informatized construction, exploration and outlook of the tunnel intelligentized construction technology are given from the aspects of the dynamic intelligentized design system of tunnel support system, the intelligentized robot construction technology of tunnel support system and the intelligentized monitoring system of tunnel structure, to promote China′s tunnel construction technology.     

公路隧道运营典型风险辨识

为加强对公路隧道运营风险的辨识、改善和优化公路隧道运营安全，降低重大隧道事故对人员伤亡、隧道结构、设备和经济收益的损失，通过隧道事故调研和大数据技术，收集近些年在全国范围内发生的802起公路隧道事故，对公路隧道自身特性和隧道事故的时间、空间、类型、诱因等特征进行分析。研究结果表明： 1)外界因素对隧道事故影响较大，在高温和车流量较大的环境下，事故发生较多； 2)特长隧道和长隧道的事故数远高于短隧道和中隧道； 3)小型车是隧道内发生事故的主要车型，事故原因多是驾驶员违规驾驶，事故类型多为追尾事故； 4)火灾事故的诱因多为车辆自身故障，其中危化品泄露多为易燃液体泄露。     

地下叠合墙接触面形式的设计研究

为解决地下工程中叠合结构接触面采用常规凿毛等方式进行预处理时存在的施工难度大、剪力槽设置参差不齐等难题，提出一种便于施工的预制叠合结构形式，然后运用ANSYS有限元软件对波浪形、三角形以及梯形波纹结构面进行受力对比分析，结果表明梯形结构面在结构应力、接触面压力以及接触面滑移方面更有优势，并确定梯形结构面作为静力荷载试验方案。通过静力荷载试验对比分析整体现浇梁和梯形结构面叠合梁在各级荷载作用下的挠度、水平位移以及裂缝开展形态，结合实测数据表明： 在受到相同荷载作用下，叠合梁的挠度增量小于整体现浇梁，同时叠合梁在裂缝开展阶段存在停滞现象，能够减缓裂缝穿过叠合面，从而提高结构的整体承载力。     

改革航道基础设施建设投资体制的实践与思考

一 目前,航道部门的经费支出方式仍是贯彻统收统支的原则,即各地将征得的航道规费按旬直接解缴省财政厅专用帐户,支出经费由各市编报支出计划后报省交通厅批准实施。在航道基础设施建设的投资方面,一般都采取全额投资的方式,即由省厅下达工程经费,地方航道管理部门组织施工,地方政府在工程实施过程中的参与程度较低。这种投资的模式在长期的实践中暴露出越来越多的弊端,主要集中在以下几个方面:     

Perspectives in Intelligentization of Tunnel Boring Machine (TBM)（对全断面隧道掘进装备智能化的一些思考）

The development status of artificial intelligence (AI) technologies, the development trend of intelligent engineering machines and the urgent national needs for the future intelligent TBMs are introduced briefly. It is pointed out that the intelligentization will be the hot spot of the tunnel engineering area and the focuses of future industry competition. The scientific challenges due to the complexity of the working environment, including state recognition and environment perception, correlation law between geological environment and operation parameters, intelligent planning and coordinated control of multi systems, are raised. In addition, the existing research foundation are analyzed and the inadequacy of the theory including environment and state perception, adaptive & dynamic control of construction parameters, multi system coordination control and multi objective optimization are obtained. At last, some thinking from the aspects of design, manufacture and operation, such as excavation perception, the adaptive dynamic control of excavation parameter condition, the excavation parameter data collection and calculation, intelligent optimization and decision making of tunneling parameters and the multi system coordination intelligent control are proposed.     

金门特长公路隧道通风方案比选研究

为解决目前特长公路隧道通风方案比选时局限于送排式通风的问题，从方案设计角度分析几种不同纵向通风模式的功能特点、适用条件，结合送排式通风与互补式通风的特点，提出单通道互补式通风的组合通风模式，并以金门特长公路隧道为例，从全寿命周期角度，对“通风井送排式”“单通道互补式”“双通道互补式”“吸尘式”4种通风方案进行比选研究。结果表明： 1）送排式通风受通风井位置影响较大，从运营通风角度，宜设置在上坡隧道中部偏下风方向； 2）互补式、吸尘式通风能够突破通风井选址的限制，但对于超过5 km的隧道，需要设置专用排烟井； 3）单通道互补式通风省去送风井，保留了送排式通风的排烟功能，具备比选价值。     

下穿黄河砂卵石地层盾构隧道管片结构受力特征现场测试

为研究砂卵石地层中管片的力学行为,以兰州地铁1号线穿黄段为研究对象,采用改良的测试传感器走线方式,对管片内力及外部水压力进行现场测试,并进行相应的数值模拟。将现场测试数据与数值模拟结果对比分析,得出如下结论:1)外部水压力及管片内力受盾构施工影响最为显著的范围为距掌子面3~5环,在此范围内应加强对受拉区的监测,并采取相应措施防止管片在施工初期破损;2)外部水压力及管片内力在距掌子面6~13环时受施工影响逐渐降低,距掌子面13环后趋于稳定;3)运用梁-弹簧模型设计管片是偏于安全的,但应充分考虑施工荷载。