环形生态水槽流动的特性研究

实测了环形生态水槽内的流速分布。采用柱坐标系下的κ-ε湍流模型及SIMPLE算法,对该流场进行了数值模拟。从计算结果和实验资料的分析比较看出,计算结果可靠。在此流场内进行了钉螺的运动特点的实验研究,结果表明钉螺具有流速敏感性,对研究钉螺的随流扩散具有重要意义。     

吉林省公主岭早白垩世泉头缍网形蛋（Dictyoolithus）一新科

报道了吉林省公主岭早白垩世泉头组发现的一窝恐龙蛋化石。蛋化石近圆形，蛋壳厚度1．4～1．7mm，蛋壳外表面均匀分布椭圆形或圆形大小不一的凹坑；蛋壳层由2、3个呈分树枝状的基本结构单元叠加而成，蛋壳基本单元之间气孔道阔大而不规则，靠近蛋壳外表面的基本结构单元相互连姑、融合形成一层相对致密的薄层。据以上特征将其归为网形蛋科（Dictyoolithidae），网形蛋属（Dictyoolithus），定为一新种：公主岭网形蛋（Dictyoolithus gongzhulingensis oosp.nov）。公主岭网形蛋是网形蛋类化石在中国东北地区的首次发现，同时也是早白垩世地层中网形蛋化石新的发现。     

基于高光谱数据和专家决策法提取红树林群落类型信息

高光谱遥感是进行地表植被观测的强有力工具,研究并验证有效的算法和数据支撑技术,对于合理利用高光谱数据进行地表植被监测与分析至关重要。在光谱特征分析和地面调查的基础上,基于决策树方法和高光谱分析方法的组合,以深圳市福田国家级自然保护区为例,利用高光谱数据进行红树林群落信息提取的实证研究。结果证实了Hymap数据对于红树林群落类型信息提取的数据支撑能力,以及相关方法用于红树林分类研究方面的有效性。     

Diurnal and seasonal variations of CO2 fluxes and their climate controlling factors for a subtropical forest in Ningxiang

In this study, the diurnal and seasonal variations of CO2 fluxes in a subtropical mixed evergreen forest in Ningxiang of Hunan Province, part of the East Asian monsoon region, were quantified for the first time. The fluxes were based on eddy covariance measurements from a newly initiated flux tower. The relationship between the CO2 fluxes and climate factors was also analyzed. The results showed that the target ecosystem appeared to be a clear carbon sink in 2013, with integrated net ecosystem CO2exchange(NEE), ecosystem respiration(RE), and gross ecosystem productivity(GEP) of-428.8, 1534.8 and1963.6 g C m-2yr-1, respectively. The net carbon uptake(i.e. the-NEE), RE and GEP showed obvious seasonal variability,and were lower in winter and under drought conditions and higher in the growing season. The minimum NEE occurred on12 June(-7.4 g C m-2d-1), due mainly to strong radiation, adequate moisture, and moderate temperature; while a very low net CO2 uptake occurred in August(9 g C m-2month-1), attributable to extreme summer drought. In addition, the NEE and GEP showed obvious diurnal variability that changed with the seasons. In winter, solar radiation and temperature were the main controlling factors for GEP, while the soil water content and vapor pressure deficit were the controlling factors in summer. Furthermore, the daytime NEE was mainly limited by the water-stress effect under dry and warm atmospheric conditions, rather than by the direct temperature-stress effect.     

Coupling of a Regional Climate Model with a Crop Development Model and Evaluation of the Coupled Model across China

In this study, the CERES(Crop Estimation through Resource and Environment Synthesis) crop model was coupled with CLM3.5, the land module of the regional climate model RegCM4. The new coupled model was named RegCM4_CERES; and in this model, crop type was further divided into winter wheat, spring wheat, spring maize, summer maize, early rice, late rice,single rice, and other crop types based on each distribution fraction. The development of each crop sub-type was simulated by the corresponding crop model separately, with each planting and harvesting date. A simulation test using RegCM4_CERES was conducted across China from 1999 to 2008; a control test was also performed using the original RegCM4. Data on crop LAI(leaf area index), soil moisture at 10 cm depth, precipitation, and 2 m air temperature were collected to evaluate the performance of RegCM4_CERES. The evaluation provided comparison of single-station time series, regional distributions,seasonal variations, and statistical indices for RegCM4_CERES. The results revealed that the coupled model had an excellent ability to simulate the phonological changes and spatial variations in crops. The consideration of dynamic crop development in RegCM4_CERES corrected the wet bias of the original RegCM4 over North China and the cold bias over South China.However, the degree of improvement was minimal and the statistical indices for RegCM4_CERES were roughly the same as the original RegCM4.     

基于多源数据和先验知识约束的复杂地质体三维建模研究

三维地质模型可以直观的展现地下地质情况,对传统地矿行业的转型升级和城市规划建设都具有重要意义。针对复杂地质条件下三维模型的构建,笔者等提出了一种基于多源数据和地质先验知识约束的三维地质建模方法。以成都市为例,基于MapGIS10.0 软件三维地学建模模块,在DEM数据、数字地质图、综合地质剖面图、钻孔数据、物探解译数据、构造纲要图等多源数据,以及地质体展布形态、产状和厚度变化,断层性质、延伸方向、产状变化、对地质体的错切,褶皱类型、形态特征、两翼产状变化等地质先验知识的共同约束下,开展复杂地质条件下三维地质模型构建研究。笔者等详细介绍了复杂地质体三维建模数据源的准备、建模流程与方法、模型的构建与可靠性分析。认为采用分块建模技术可有效降低复杂地质体三维模型构建的难度,提高建模效率,实现模型的无痕拼接,且易于后期模型的修改完善。本次基于多源数据和地质先验知识约束,采用分块建模技术首次构建了成都市三维地质模型。笔者等通过地质先验知识（地质规律）和静态数据（可视化和抽稀钻孔数据）对模型的可靠性进行了分析,其中抽稀钻孔数据分析采用未参与建模的真实钻孔对三维地质模型中地质体埋深和分层厚度进行误差计算,获得地质体埋深误差均值为33.15 m,分层厚度误差均值21.37 m,认为模型的可靠性较高,可为成都市城市规划和重大工程选址提供重要的基础地质数据支撑。     

基于多源数据和先验知识约束的复杂地质体三维建模研究

三维地质模型可以直观的展现地下地质情况,对传统地矿行业的转型升级和城市规划建设都具有重要意义。针对复杂地质条件下三维模型的构建,笔者等提出了一种基于多源数据和地质先验知识约束的三维地质建模方法。以成都市为例,基于MapGIS10.0 软件三维地学建模模块,在DEM数据、数字地质图、综合地质剖面图、钻孔数据、物探解译数据、构造纲要图等多源数据,以及地质体展布形态、产状和厚度变化,断层性质、延伸方向、产状变化、对地质体的错切,褶皱类型、形态特征、两翼产状变化等地质先验知识的共同约束下,开展复杂地质条件下三维地质模型构建研究。笔者等详细介绍了复杂地质体三维建模数据源的准备、建模流程与方法、模型的构建与可靠性分析。认为采用分块建模技术可有效降低复杂地质体三维模型构建的难度,提高建模效率,实现模型的无痕拼接,且易于后期模型的修改完善。本次基于多源数据和地质先验知识约束,采用分块建模技术首次构建了成都市三维地质模型。笔者等通过地质先验知识（地质规律）和静态数据（可视化和抽稀钻孔数据）对模型的可靠性进行了分析,其中抽稀钻孔数据分析采用未参与建模的真实钻孔对三维地质模型中地质体埋深和分层厚度进行误差计算,获得地质体埋深误差均值为33.15 m,分层厚度误差均值21.37 m,认为模型的可靠性较高,可为成都市城市规划和重大工程选址提供重要的基础地质数据支撑。     

河流年径流量的R/S灰色预测

径流过程具有分形和灰色特征。基于此,将R/S分析与灰色系统理论相结合,提出了R/S灰色预测模型以预报河流年径流量。针对黑河正义峡水文站60a(1949~2011年)的年径流量资料,首先进行R/S分析,确定径流量序列的Hurst指数H和平均循环周期T;然后在一个周期内进行年径流量灰色预测。结果表明:R/S灰色预测结果的精度明显高于直接进行灰色预测的精度。该方法拓宽了分形和灰色理论在径流过程研究的应用范围,为河流径流量的科学预测提供了一种新方法。     

棱镜常数快速检测方法研究

在精密工程测量中,棱镜(加)常数测定的准确与否会直接影响全站仪观测成果的质量。而常规的检测手段往往受到场地、设施等因素的制约,测量过程费时费力。因此,提出一种新的快速测定方法,旨在突破传统方法面临的条件限制,即采用全站仪在多个测站反复观测一组360°棱镜阵列,再通过附有参数的条件平差迭代求解棱镜常数。本方法无需专业场地和辅助设备,简捷易行,效果良好。     

青藏高原两类下垫面地表能量分配对气候要素的响应研究

利用青藏高原北麓河观测站（退化高寒草甸）和玛曲观测站（高寒草原）2014年地面观测资料,通过组合分类法,对比分析了两类下垫面生长季土壤含水量、水汽压差和净辐射对地表能量分配的直接影响和间接影响,并且利用路径分析法研究了影响地表能量分配的关键气候因子。结果表明:北麓河站和玛曲站潜热占比（潜热通量与地表可利用能量的比值）对土壤含水量的响应分别处于土壤水分抑制阶段和能量抑制阶段。其中,北麓河站潜热占比在水汽压差较大时随土壤含水量增长较快,受净辐射的影响较小;而玛曲站潜热占比随土壤含水量的变化趋势受水汽压差和净辐射的影响均较小。北麓河站潜热占比随水汽压差的增大先减小后趋于不变,并且潜热占比对水汽压差的敏感性随土壤含水量的增大而减小;而玛曲站潜热占比随水汽压差的增大先增大后趋于不变,几乎不受土壤含水量和净辐射的影响。北麓河站和玛曲站潜热占比均随净辐射的增大趋于稳定,其稳定值分别与土壤含水量和水汽压差有关。路径分析结果显示,降水是影响北麓河站潜热占比的主要气候因子,而气温是影响玛曲站潜热占比的主要气候因子。