Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves     

Dynamic Response Analysis of Interaction System of R.C. Gravity Single-Leg Platform

In this paper, the responses of the interaction system of R.C. gravity single-leg platform to seismic excitation are mainly analysed. A set of nonlinear equations for the interaction system are established by using the wave, one is the soil-structure interaction and the other is the fluid-structure interaction. The seismic response of the interaction system is analysed for the influence of the asymmetric structure, fluid action, etc. with the input of seismic SH waves in any direction. The numerical results are given for a simple example.     

A New Approach to High-Order Boussinesq-Type Equations with Ambient Currents

A new approach to high-order Boussinesq-type equations with ambient currents is presented. The current velocity is assumed to be uniform over depth and of the same magnitude as the shallow water wave celerity. The wave velocity field is expressed in terms of the horizontal and vertical wave velocity components at an arbitrary water depth level. Linear operators are introduced to improve the accuracy of the kinematic condition at the sea bottom. The dynamic and kinematic conditions at the free surface are expressed in terms of wave velocity variables defined directly on the free surface. The new equations provide high accuracy of linear properties as well as nonlinear properties from shallow to deep water, and extend the applicable range of relative water depth in the case of opposing currents.     

Fuzzy Fatigue Reliability Analysis of Offshore Platforms in Ice-Infested Waters

1 .IntroductionTheBohaiGulfisinfestedbyiceinthewholewinter,andoffshorestructuresthereexperiencenotonlywind ,waves ,currentsandearthquake ,butalsoiceloadswhicharecomplicatedbecauseofthedynamicinteractionbetweenicesheetsandstructures.Duanetal.( 2 0 0 0 )hadacomprehensivere viewofthelatestadvancesonice inducedvibration ,fatigueandfractureofoffshorestructures ,payingmuchattentiontothedifferencesinicebreakingmodeanddynamicsofstructuresindifferentice in festedwaters .Theypresentedcriticallythelates…     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

Test Study on Current Force on Mooring Ships

In respect of an offshore berthing pillar, the test study result of current force acting on mooring ships is described in this paper. Empirical and semi-empirical relationships of current force coefficient are given according to the angle between the flow direction and the ship's longitudinal axis, which are coincident with the result of theoretical analysis.     

南海表层流场的卫星跟踪浮标观测结果分析

运用卫星跟踪漂移浮标资料分析南海表层海流 ,研究了有关海域的表层海流特征。结果表明 ,秋、冬季入侵南海的黑潮水有一小部分沿台湾南岸折回黑潮主干 ,并有时在台湾西南外海形成反气旋涡旋 ,其余大部分黑潮水西行进入南海内部。吕宋岛西部沿岸流始于 1 3°N以南 ,沿菲律宾西海岸北上抵达吕宋岛西北角 ,与黑潮水混合后西行     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

A Nonlinear Model of Surf Beat

A nonlinear short-wave-averaged (surf beat) model is presented. The model is based on that of Roelvink (1993), but the numerical techniques used in the solution are based on the so-called weighted-averaged flux (WAF) method (eg Watson et al., 1992), with time-operator splitting used for the treatment of some of the source terms. This method allows a small number of computational points to be used, and is particularly efficient in modelling breaking long waves. The short-wave (or primary-wave) energy equation is solved using a more traditional Lax-Wendroff technique. Results of validation indicate that the model performs satisfactorily in most respects.     

Wave Loads and Protective Techniques of An On-Shore Wave Power Device

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec