Replaceable links with direct brace attachments for eccentrically braced frames

This paper reports findings of an experimental study conducted on replaceable links for steel eccentrically braced frames (EBFs). A replaceable link detail which is based on splicing the directly connected braces and the beam outside the link is proposed. This detail eliminates the need to use hydraulic jacks and flame cutting operations for replacement purposes. Performance of this proposed replaceable link was studied by conducting eight nearly full‐scale EBF tests under quasi‐static cyclic loading. The link length ratio, stiffening of the link, loading protocol, connection type, bolt pretension, gap size of splice connections, and demand‐to‐capacity ratios of members were considered as the prime variables. The specimens primarily showed two types of failure modes: link web fracture and fracture of the flange at the link‐to‐brace connection. No failures were observed at the splice connections indicating that the proposed replaceable link detail provides an excellent response. The inelastic rotation capacity provided by the replaceable links satisfied the requirements of the AISC Seismic Provisions for Structural Steel Buildings (AISC341–10). The overstrength factor of the links exceeded 2.0, which is larger than the value assumed for EBF links by design provisions. The high level of overstrength resulted in brace buckling in one of the specimens demonstrating the importance of overstrength factor used for EBF links. Copyright © 2017 John Wiley & Sons, Ltd.     

An improved earthquake catalogue (<Emphasis Type="Italic">M</Emphasis> ≥ 4.0) for Turkey and its near vicinity (1900–2012)

Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, M_w; surface wave magnitude, M_S; body-wave magnitude m_b; local magnitude M_L and duration magnitude M_d) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of M_w. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.     

Evolution of seismic hazard maps in Turkey

A review on the historical evolution of seismic hazard maps in Turkey is followed by summarizing the important aspects of the updated national probabilistic seismic hazard maps. Comparisons with the predecessor probabilistic seismic hazard maps as well as the implications on the national design codes conclude the paper.     

Environmental hazard analysis of a gypsum karst depression area with geophysical methods: a case study in Sivas (Turkey)

Because the mixture of seawater and freshwater in the Gyeongin-Ara Waterway in South Korea can lead to the intrusion of saline water into surrounding aquifers, systematic management through the establishment of a groundwater protection area is required. The analytic hierarchy process (AHP) model is used to delineate this protection area based on two primary factors and five secondary factors related to saline water intrusion. The study area is divided into 987 gridded cells with a unit size of 100 × 100 m, and the final evaluation score for each cell is calculated using the AHP model. Consequently, several artificial neural network models based on a multilayer perceptron are developed using the AHP’s secondary criteria and the evaluation score. Comparing the evaluation scores of ANN and AHP, more than 180 samples are required in the ANN model to insure high R2 between the original and estimated values. The ANN model is more consistent than the AHP model when determining groundwater protection area, because it can be re-constructed due to the changes in some secondary criteria and also changed due to a standardization process. The final evaluation score by the ANN model based on 300 samples, with the highest R2, is calculated and the regions with a score higher than 2.0 are selected as the groundwater protection area, accounting for 15% of the total cells. This area is similar to the range within approximately 200 m of the GA Waterway and also includes some changing sites in hydrogeochemistry and electric conductivity, which is produced by saline water intrusion. If the land-use type, groundwater levels, and some other criteria change at any cell, the ANN model can be re-executed to verify whether the cell belongs to a groundwater protection area. Considering that salinity of groundwater near the waterway can be affected by various factors including well depth, pumping conditions, and groundwater levels, the ANN model, which is a non-linear model, can be more effective for prediction than the AHP model.     

Development of detachable replaceable links for eccentrically braced frames

Eccentrically braced frames (EBFs) can be repaired after a major earthquake by replacing the links. The link replacement is not a straightforward process and is influenced by the type of the link and the amount of residual frame deformations. The past decade has witnessed the development of different types of replaceable links such as end-plated links, web connected links, bolted flange and web spliced links, and collector beam and brace spliced links. All of the developed replaceable link details, except the web connected links, are not suitable for link replacement under residual frame drift. In this paper, a detachable replaceable link detail which is based on splicing the link at its mid-length is proposed. The detail is well suited for installation under residual frame drifts. In addition, the weight and size of the members to be transported and erected are reduced significantly, thereby facilitating the replacement procedure. Performance of this proposed replaceable link is studied by conducting six nearly full scale EBF tests under quasi-static cyclic loading. The link length ratio, type of end-plated mid-splice connection, and the amount of residual drift are considered as test variables. The test results revealed that the inelastic rotation capacity of the detachable replaceable links exceeds the requirements of the AISC Seismic Provisions for Structural Steel Buildings. No failures are observed in the end-plated mid-splice connections demonstrating the potential of the proposed details. The detachable replaceable links are investigated by numerical analysis as well to further validate their applicability and to develop design recommendations.     

An improved input energy spectrum verified by the shake table tests

Input energy is the principal component of the energy balance equation. It is beneficial to determine, through its components, how the recoverable and irrecoverable energies are distributed within the structural elements. Several equations and attenuation relations to define mass-normalized input energy spectra exist in the literature. They are mainly proposed for elastic systems subjected to far-fault EQs. There is a lack of experimental verification of these proposed spectra. In this paper, experimental assessment was performed to the existing spectra, and further improvements were accomplished. For this purpose, steel cantilever columns were tested on the shake table for two specific historical EQs coincidently having similar spectral acceleration values. Based on the experimental results, a three-part mass-normalized relative input energy spectrum was formulated including soil type, EQ (corner period, intensity, duration, spectral acceleration, and velocity), and structural behavioral characteristics (period and structural damping). The proposed input energy spectrum was experimentally calibrated and numerically validated for various EQs featuring near- and far-field types. Analytical and experimental comparisons were made between the previously developed spectrum and the newly proposed one. The validation studies and the statistical evaluations exposed that the proposed spectrum yielded better agreement with the experimental and numerical results.     

Multivariate statistical analysis of the groundwater flow in shallow aquifers: a case of the basins of northern Algeria

Water resources in Algeria are mainly controlled by climate change which creates enormous problems in its planning, management and distribution. While the surface water resources are perfectly managed and operated by means of dams and small dams built for several years, the groundwater resources remain long unknown and unusable because of the lack of relevant working tools (e.g., methods, formulas, maps, etc.) for planners and engineers working in the field of water resources exploration. To highlight the hydrodynamic processes of groundwater in shallow aquifers of the basins of northern Algeria, we conducted a study using 81 subwatersheds collected from different locations at the basins; taking into account the climatic and geomorphological factors, to understand water usage trends, analyse patterns, tap good shallow aquifers and ensure long lasting supplies of water through arid periods, mapping and modelling of groundwater are fundamental to problem resolution. Multivariate statistical techniques as well as cluster and principal component analysis were applied to the data on groundwater flow, with the objective of defining the main controls on the groundwater flows at the basins. These statistical techniques showed the presence of three groundwater flow groups with increasing importance according to precipitation. The first group was mainly influenced by climatic factors, the second was more controlled by the communication between the surface and underground flows and the third group revealed the influence of geomorphological factors on groundwater flows.     

Evaluation of the physico-mechanical parameters affecting the deterioration rate of Ahlat ignimbrites (Bitlis,Turkey)

The paper principally focuses on the durability assessment of various stratigraphic levels of Ahlat ignimbrites collected from the eastern region of Turkey. A total of four different ignimbrite types with dissimilar color, texture and particularly welding degree were tested in laboratory. The laboratory tests performed on the ignimbrite specimens indicate that the welding degree as well as the lithic material content mainly controls the strength and capillarity properties of the ignimbrites. In addition, the durability of highly porous ignimbrites strongly depends upon the degree of welding. The effect of several weathering agents on the ignimbrites was evaluated on the basis of decay constant parameter. Accordingly, salt and ice crystallization pressures are a couple of major destructive agents acting within the micropores of the ignimbrites. Conversely, the investigated specimens are relatively durable against cyclic wetting–drying. Statistical evaluations reveal that the pore diameter is the major controlling factor on the deterioration rate of the ignimbrites after specifically recurrent freeze–thaw cycles. Moreover, the dry unit weight of the ignimbrites is more significant than the uniaxial compressive strength considering the deterioration rates during wetting–drying and salt crystallization. A less significant relationship was obtained between pore diameter and salt crystallization decay constant.     

Triassic warm subduction in northeast Turkey: Evidence from the Ağvanis metamorphic rocks

Within the Tethyan realm, data for the subduction history of the Permo–Triassic Tethys in the form of accretionary complexes are scarce, coming mainly from northwest Turkey and Tibet. Herein we present field geological, petrological and geochronological data on a Triassic accretionary complex, the A?vanis metamorphic rocks, from northeast Turkey. The A?vanis metamorphic rocks form a SSE–NNW trending lozenge‐shaped horst, ～20 km long and ～6 km across, bounded by the strands of the active North Anatolian Fault close to the collision zone between the Eastern Pontides and the Menderes–Taurus Block. The rocks consist mainly of greenschist‐ to epidote‐amphibolite‐facies metabasite, phyllite, marble and minor metachert and serpentinite, interpreted as a metamorphic accretionary complex based on the oceanic rock types and ocean island basaltic, mid‐ocean ridge basaltic and island‐arc tholeiitic affinities of the metabasites. This rock assemblage was intruded by stocks and dikes of Early Eocene quartz diorite, leucogranodiorite and dacite porphyry. Metamorphic conditions are estimated to be 470–540°C and ～0.60–0.90 GPa. Stepwise ⁴⁰Ar/³⁹Ar dating of phengite–muscovite separates sampled outside the contact metamorphic aureoles yielded steadily increasing age spectra with the highest incremental stage corresponding to age values ranging from ～180 to 209 Ma, suggesting that the metamorphism occurred at ≥ 209 Ma. Thus, the A?vanis metamorphic rocks represent the vestiges of the Late Triassic or slightly older subduction in northeast Turkey. Estimated P–T conditions indicate higher temperatures than those predicted by steady state thermal models for average subduction zones, and can best be accounted for by a hot subduction zone, similar to the present‐day Cascadia. Contact metamorphic mineral assemblages around an Early Eocene quartz diorite stock, on the other hand, suggest that the present‐day erosion level was at depths of ～14 km during the Early Eocene, indicative of reburial of the metamorphic rocks. Partial disturbance of white‐mica Ar–Ar age spectra was probably caused by the reburial coupled with heat input by igneous activity, which is probably related to thrusting due to the continental collision between Eastern Pontides and the Menderes–Taurus Block.     

Empirical ground-motion models for point- and extended-source crustal earthquake scenarios in Europe and the Middle East

This article presents the latest generation of ground-motion models for the prediction of elastic response (pseudo-) spectral accelerations, as well as peak ground acceleration and velocity, derived using pan-European databases. The models present a number of novelties with respect to previous generations of models (Ambraseys et al. in Earthq Eng Struct Dyn 25:371–400, 1996, Bull Earthq Eng 3:1–53, 2005; Bommer et al. in Bull Earthq Eng 1:171–203, 2003; Akkar and Bommer in Seismol Res Lett 81:195–206, 2010), namely: inclusion of a nonlinear site amplification function that is a function of $\text{ V }_\mathrm{S30}$ and reference peak ground acceleration on rock; extension of the magnitude range of applicability of the model down to $\text{ M }_\mathrm{w}$ 4; extension of the distance range of applicability out to 200 km; extension to shorter and longer periods (down to 0.01 s and up to 4 s); and consistent models for both point-source (epicentral, $\text{ R }_\mathrm{epi}$ , and hypocentral distance, $\text{ R }_\mathrm{hyp}$ ) and finite-fault (distance to the surface projection of the rupture, $\text{ R }_\mathrm{JB}$ ) distance metrics. In addition, data from more than 1.5 times as many earthquakes, compared to previous pan-European models, have been used, leading to regressions based on approximately twice as many records in total. The metadata of these records have been carefully compiled and reappraised in recent European projects. These improvements lead to more robust ground-motion prediction equations than have previously been published for shallow (focal depths less than 30 km) crustal earthquakes in Europe and the Middle East. We conclude with suggestions for the application of the equations to seismic hazard assessments in Europe and the Middle East within a logic-tree framework to capture epistemic uncertainty.