Source parameters for the M<Subscript>w</Subscript> = 6.6, 03 February 2002, Çay Earthquake (Turkey) and aftershocks from GPS,Southwestern Turkey

The 03 February 2002 Çay Earthquake (M_w ～6.7) occurred on the fault segment between Eber and Ak?ehir Lakes followed by a large aftershock (M_w ～5.6) near the western end of the fault and two sequential aftershocks. We computed the coseismic surface displacements from static GPS measurements to determine the fault geometry parameters and uniform slip components. The coseismic displacements were obtained through combining the regional pre-earthquake and post-earthquake GPS data. Fault geometry and slips were acquired through the inversion of GPS data modeling the events as elastic dislocations in a half-space and assuming all four events took place on the same fault plane. Results suggest that one-segment fault of ～33 km length and dipping ～43° northward suffices to model the dislocation, assuming uniform slip distribution with 0.51 m dip slip, 0.26 m left-lateral slip extending to a depth down to ～11.5 km which is consistent with seismological evidence. The results also verify the normal faulting in the eastern flank of Isparta Angle which has long been assumed as a thrusting structure. While the available data cannot identify the four individual events on the same day, an attempted distributed slip model differentiates dip slip and left-lateral slips near the hypocenter with maximum values of ～1 and 0.6 m, respectively.     

Site classification of Turkish national strong-motion stations

Since 1973, the General Directorate of Disaster Affairs of Turkey has deployed several strong-motion accelerographs at selected sites. Within the framework of the project entitled Compilation of National Strong Ground Motion Database in Accordance with International Standards, site conditions were investigated within the upper 30-m depth by surface seismic and standard penetration tests. Preliminary characterization of the sites is made by making use of both geophysical and geotechnical criteria of NEHRP Provisions and Eurocode-8 site classification systems. The liquefaction susceptibility of those sites which comprise saturated cohesionless deposits is also determined. Mean shear-wave velocity, mean penetration resistance, site class, and liquefaction susceptibility of each site are tabulated. The Turkish strong-motion database supplemented by detailed information on site conditions is a valuable source of information particularly for those studies that put emphasis on the relationship between site conditions and strong-motion parameters.     

Adaptive neuro-fuzzy modeling for the swelling potential of compacted soils

This paper aims to present the usability of an adaptive neuro fuzzy inference system (ANFIS) for the prediction swelling potential of the compacted soils that are important materials for geotechnical purposes such as engineered barriers for municipal solid waste, earth dams, embankment and roads. In this study the swelling potential that is also one of significant parameters for compacted soils was modeled by ANFIS. For the training and testing of ANFIS model, data sets were collected from the tests performed on compacted soils for different geotechnical application in Nigde. Four parameters such as coarse-grained fraction ratio (CG), fine-grained fraction ratio (FG), plasticity index (PI) and maximum dry density (MDD) were presented to ANFIS model as inputs. The results obtained from the ANFIS models were validated with the data sets which are not used for the training stage. The analyses revealed that the predictions from ANFIS model are in sufficient agreement with test results.     

The effect of seasonally frozen soil on stochastic response of elevated water tank under random excitation

Significant seismic events have occurred around the world during winter months in regions where cold temperatures cause ground freezing. Current seismic design practice does not address the effects of cold temperatures in the seasonally frozen areas. Since many elevated water tank structures in cold regions are located in seismic active zones, determining the effect of seasonally frozen soil on the stochastic response of elevated water tank structures subjected to random seismic excitation is an important structural consideration. A three dimensional finite element model, which considers viscous boundaries, was built up to obtain the stochastic seismic behavior of an elevated water tank–fluid–soil interaction system for frozen soil condition. For this model, the power spectral density function represents random ground motion applied to each support point of the three dimensional finite element model of the elevated water tank–fluid–soil interaction system. Numerical results show that the soil temperature affects the seismic response of the elevated water tank; whereas the variation in the thickness of the frozen soil causes insignificant changes on the response. In addition, the effect of the variation in water tank’s fullness on the stochastic response of the coupled system is investigated in the study. As a result, the seasonal frost changes the foundation soil stiffness and may impact seismic behavior of the water tank.     

Comparison of 2D versus 3D modeling approaches for the analysis of the concrete faced rock‐fill Cokal Dam

This paper's primary purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a concrete faced rock‐fill dams under dynamic loading conditions. The state of stress on the face plate was obtained in both cases using a total strain based crack model to predict the spreading of cracks on the plate and the corresponding crack widths. Results of the 2D and 3D analyses agree well. Although significantly more demanding, 3D analyses have the advantage of predicting the following: (i) the opening of the vertical construction joints; (ii) the cracking at the valley sides; and (iii) the crushing of the plate during the seismic action. During the earthquake loading, the cracking predicted at the base of the face plate after the impounding spread significantly towards the crest of the dam; however, the crack widths are obtained relatively small. Crushing of the face plates at the construction joints is the primary cause of the large scale cracking predicted on the face plate for high intensity earthquakes. Earthquake induced permanent deformation of the fill increases the compressive stresses on the face plate, thereby reducing the minute cracking on the plate. However, this effect also leads to significant increases in the residual openings at the construction joints and at the plinth level. Copyright © 2013 John Wiley & Sons, Ltd.     

Occurrence of Phthalates in Sewage Sludge from Three Wastewater Treatment Plants in Istanbul,Turkey

Phthalates are considered priority pollutants because of their potential adverse effects on ecosystems and human health. The objectives of this study were to determine the occurrence of five phthalates (DMP, DEP, DBP, BBP, and DEHP) in sewage sludge and to determine the seasonal variability of these contaminants at three (Bahçe?ehir, Pa?aköy, and Tuzla) full‐scale municipal and domestic wastewater treatment plants (WWTP) in Istanbul, Turkey. Mass balance was also calculated for DEHP at Tuzla WWTP sludge treatment units. DMP, DEP, DBP, BBP, and DEHP concentrations in sewage sludge ranged from 1.4 to 2.7 mg/kg dry weight (dw), 1.1 to 2.8, 0.6 to 4.6, 2.8 to 6.2, 18 to 490 mg/kg dw, respectively. Phthalate concentrations from the Bahçe?ehir and Pa?aköy WWTPs met the limit (100 mg/kg dw) of Turkey national sludge regulation and the Europe Union draft of sludge directive for land application, whereas phthalate concentrations from Tuzla WWTP exceeded the maximum permissible concentration. Phthalate concentrations did not show seasonal variations for Bahçe?ehir and Pa?aköy WWTPs, which receive mainly household wastewater while some fluctuations were observed DEP, DBP, and DEHP at Tuzla WWTP which has a lot of industrial wastewater contribution. The mass balance showed that approximately 17% of DEHP in the primary and secondary sludge was removed by anaerobic digestion, while 43% returned back to the beginning of the WWTP and 40% remained in the dewatered sludge. This study suggests that phthalates in sludge from WWTPs with industrial wastewater contribution may limit the use of sludge for land application.