柴达木盆地北缘侏罗系不同沉积环境烃源岩生物标志物特征及其应用

柴达木盆地北缘地区侏罗系(中下侏罗统)的优质烃源岩主要发育于湖相与三角洲相环境。研究了不同时代、不同沉积环境中烃源岩的生物标志物组成特征,结果发现,有3类化合物的分布与组成差异显著,包括三环萜烷(C19、C20、C21)的分布型式、重排藿烷的丰度以及规则甾烷的相对组成。其中,不同时代的差异主要体现在规则甾烷组成上;而不同沉积环境的差异主要体现为三环萜烷(C19、C20、C21)的分布型式及重排藿烷的丰度。分析认为,这些差异与烃源岩的沉积环境及其生源组成有密切关系。据此,初步将这些参数应用于两方面研究,一是为划分地层沉积环境提供“生物标志物相标志”,二是研究油源对比,取得良好效果。因此,本文研究结果具有重要实用价值与参考意义。     

高、低煤阶煤层气藏地质特征及控气作用差异性研究

高、低煤阶煤层气地质特征及控气作用差异性是研究煤层气富集成藏的重要组成部分,是煤层气勘探开发理论研究过程中重要的基础性研究领域之一。本文以中国沁水、阜新盆地和美国粉河盆地等典型的含气盆地为例,探讨了高、低煤阶煤层气的储层物性差异,分析了构造控气和水文地质控气作用的差异性。研究表明,高煤阶气藏含气量高,CH4百分含量高,δ13C1值大于-38.75‰,储层渗透率变化小,储层改造难,构造热事件对煤层气的生成、富集贡献大,持续的水动力使气藏遭到破坏,且破坏幅度大,现今地下水格局对气藏的形成具有一定的影响;低煤阶气藏含气量低,CH4百分含量低,δ13C1值大于-49.11‰,储层渗透率变化大,储层易改造,煤热演化史及煤阶影响着煤层气的生成、富集,在煤层气生成过程中活跃的水动力是甲烷生成的主要的水文地质条件之一,但持续的水动力使气藏遭到破坏,且破坏幅度小,而合适的地层水矿化度则是低煤阶煤层气生成的重要条件,地下水格局对气藏的调整和改造起到决定性的影响。     

松科1井南孔选址、岩心剖面特征与特殊岩性层的分布

松科1井南孔是松辽盆地白垩系科学钻探工程两个钻孔中的一个,位于松辽盆地北部中央坳陷区齐家古龙凹陷敖南鼻状构造的翼部。通过对松科1井南孔嫩二段底部到泉三段顶部连续取心资料的详细描述,建立松科1井南孔岩心剖面,识别出5种常见岩性(泥岩、粉砂质泥岩、泥质粉砂岩、粉砂岩和细砂岩)和8种特殊岩性(白云岩、火山灰、油页岩、灰质泥岩、泥灰岩、重结晶灰岩、介形虫碎屑灰岩和介形虫灰岩)。特殊岩性出现的总层数为172层,总厚度为14.516m,分布在青一段,青二、三段,姚二、三段,嫩一段和嫩二段地层中。对松科1井的精细岩心描述和对特殊岩性的识别是后续研究工作开展的基础。     

西天山达巴特矿区火山岩的形成时代、构造背景及对斑岩型矿化的制约

本文通过对西天山地区比较典型的达巴特斑岩铜钼矿床矿区范围内出露的英安岩和花岗斑岩进行了系统的岩石地球化学分析,对流纹斑岩和花岗斑岩中的锆石进行了SHRIMPU—Pb定年研究,分别获得了315．9±5．9Ma和278．7±5．7Ma。岩石化学、微量以及稀土元素特征表明从英安岩到花岗斑岩,岩体具有明显的分异演化特征和很好的继承性。火山岩和次火山岩的精确定年为准确厘定火山岩形成的时限和地球动力学背景提供了依据。结合已有的Re-Os法获得的矿化年龄,表明晚石炭世末-早二叠世初（278．7±5．7Ma）,西天山地区进入板块碰撞-板内伸展阶段,由于深源岩浆侵位,在达巴特矿区形成了由花岗斑岩、流纹斑岩和流纹质角砾熔结凝灰岩组成的椭圆形火山机构,并导致相关矿床的形成。     

Occurrence and evolution of the Xiaotangshan hot spring in Beijing, China

Thermal groundwater occurs in bedrock aquifers consisting of the dolomite of the Wumishan Group of the Jixianin System and the Cambrian carbonate in the Xiaotangshan geothermal field near the northern margin of the North China Plain, China. The hot water in the geothermal field of basin-type discharges partly in the form of the Xiaotangshan hot spring under natural conditions. The hot water has TDS of less than 600 mg/L and is of Na·Ca-HCO₃ type. The geothermal water receives recharge from precipitation in the mountain area with elevation of about 500 m above sea level to the north of the spring. Thermal groundwater flows slowly south and southeast through a deep circulation with a residence time of 224 years estimated with the Ra–Rn method. The Xiaotangshan hot spring dried up in the middle of the 1980s owing to the increasing withdrawal of the hot water in the geothermal field in the past decades. The water level of the geothermal system still falls continually at an annual average rate of about 2 m, although water temperature changes very little, indicating that the recharge of such a geothermal system of basin-type is limited. Over-exploitation has a dramatic impact on the geothermal system, and reduction in exploitation and reinjection are required for the sustainable usage of the hot water.     

Recharge source and hydrogeochemical evolution of shallow groundwater in a complex alluvial fan system,southwest of North China Plain

Many cities around the world are developed at alluvial fans. With economic and industrial development and increase in population, quality and quantity of groundwater are often damaged by over-exploitation in these areas. In order to realistically assess these groundwater resources and their sustainability, it is vital to understand the recharge sources and hydrogeochemical evolution of groundwater in alluvial fans. In March 2006, groundwater and surface water were sampled for major element analysis and stable isotope (oxygen-18 and deuterium) compositions in Xinxiang, which is located at a complex alluvial fan system composed of a mountainous area, Taihang Mt. alluvial fan and Yellow River alluvial fan. In the Taihang mountainous area, the groundwater was recharged by precipitation and was characterized by Ca–HCO₃ type water with depleted δ¹⁸O and δD (mean value of −8.8‰ δ¹⁸O). Along the flow path from the mountainous area to Taihang Mt. alluvial fan, the groundwater became geochemically complex (Ca–Na–Mg–HCO₃–Cl–SO₄ type), and heavier δ¹⁸O and δD were observed (around −8‰ δ¹⁸O). Before the surface water with mean δ¹⁸O of −8.7‰ recharged to groundwater, it underwent isotopic enrichment in Taihang Mt. alluvial fan. Chemical mixture and ion exchange are expected to be responsible for the chemical evolution of groundwater in Yellow River alluvial fan. Transferred water from the Yellow River is the main source of the groundwater in the Yellow River alluvial fan in the south of the study area, and stable isotopic compositions of the groundwater (mean value of −8.8‰ δ¹⁸O) were similar to those of transferred water (−8.9‰), increasing from the southern boundary of the study area to the distal end of the fan. The groundwater underwent chemical evolution from Ca–HCO₃, Na–HCO₃, to Na–SO₄. A conceptual model, integrating stiff diagrams, is used to describe the spatial variation of recharge sources, chemical evolution, and groundwater flow paths in the complex alluvial fan aquifer system.     

Assessment of frozen-ground conditions for engineering geology along the Qinghai–Tibet highway and railway, China

The Qinghai–Tibet Highway and Railway (the Corridor) across the Qinghai–Tibet Plateau traverses 670 km of permafrost and seasonally frozen-ground in the interior of the Plateau, which is sensitive to climatic and anthropogenic environmental changes. The frozen-ground conditions for engineering geology along the Corridor is complicated by the variability in the near-surface lithology, and the mosaic presence of warm permafrost and talik in a periglacial environment. Differential settlement is the major frost-effect problem encountered over permafrost areas. The traditional classification of frozen ground based on the areal distribution of permafrost is too generalized for engineering purposes and a more refined classification is necessary for engineering design and construction. A proposed classification of 51 zones, sub-zones, and sections of frozen ground has been widely adopted for the design and construction of foundations in the portion of the Corridor studied. The mean annual ground temperature (MAGT), near-surface soil types and moisture content, and active faults and topography are most commonly the primary controlling factors in this classification. However, other factors, such as local microreliefs, drainage conditions, and snow and vegetation covers also exert important influences on the features of frozen ground. About 60% of the total length of the Corridor studied possesses reasonably good frozen-ground conditions, which do not need special mitigative measures for frost hazards. However, other sections, such as warm and ice-rich or -saturated permafrost, particularly in the sections in wetlands, ground improvement measures such as elevated land bridges and passive or proactive cooling techniques need to be applied to ensure the long-term stability of thermally unstable, thick permafrost subsoils, and/or refill with non-frost-susceptible soils. Due to the long-history of the construction and management of the Corridor by various government departments, adverse impacts of construction and operation on the permafrost environment have been resulted. It is recommended that an integrated, executable plan for the routing of major construction projects within this transportation corridor be established and long-term monitoring networks installed for evaluating and mitigating the impact from anthropogenic and climatic changes in frozen-ground conditions.     

Diamond formation in sulfide pyrrhotite-carbon melts: Experiments at 6.0–7.1 GPa and application to natural conditions

Experiments at 6.0–7.1 GPa and 1500–1700°C were carried out to explore the boundary conditions of diamond nucleation and growth in pyrrhotite-carbon melt-solutions. Pyrrhotite is one of the main sulfide minerals of the pyrrhotite-pentlandite-chalcopyrite assemblage of mantle rocks and primary inclusions in diamond. Solutions of carbon in sulfide melts oversaturated with respect to diamond at the expense of the dissolution of starting graphite (thermodynamically unstable phase) are formed owing to the difference between the solubilities of graphite and diamond, which increases under the influence of temperature gradients in experimental samples. We determined the fields of carbon solutions in pyrrhotite melt showing labile and metastable oversaturation with respect to diamond, which correspond to the spontaneous nucleation of the diamond phase and diamond growth on seeds, respectively. The linear growth rate of diamond in sulfide-carbon melts is rather high (on average, 10 μ/min during the first 1–2 min from the onset of spontaneous crystallization). The nucleation density is estimated as 180 grains per cubic centimeter. Diamonds crystallized from sulfide melts show octahedral and spinel twin shapes. Diamond polycrystals were synthesized for the first time from a sulfide medium as intergrowths of skeletal (edge) or “cryptocrystalline” microdiamonds, from 1 to 100 μm in size, their spinel twins and, occasionally, polysynthetic (star-shaped) twins. During diamond growth from sulfidecarbon melts on smooth faces of cuboctahedral diamond seeds synthesized in metal systems, smooth-faced layer-by-layer step-like growth was observed on their octahedral (111) faces, whereas growth on the (100) cubic faces produced rough-surfaced layers of intergrown micropyramids, whose axes were oriented normal to the (100) face. The obtained experimental results were applied to the problem of diamond genesis under the conditions of the Earth’s mantle in the framework of the model of carbonate-silicate parental melts with blebs of immiscible sulfide melts.     

Experimental study of fluorine and chlorine contents in mica (biotite) and their partitioning between mica,phonolite melt,and fluid

This paper reports the results of a study of the composition of mica (biotite) crystallizing in the system of phonolite melt-Cl- and F-bearing aqueous fluid at T ～ 850°C, P = 200 MPa, and \(f_{O_2 } \) = Ni-NiO, as well as data on F and Cl partitioning between coexisting phases. It was established that Cl content in mica is significantly lower than in phonolite melt and, especially, in fluid. Fluorine shows a different behavior in this system: its content in mica is always higher than in phonolite melt but lower than in fluid. The mica-melt partition coefficients of Cl and F also behave differently. The Cl partition coefficient gradually increases from 0.17 to 0.33 with increasing Cl content in the system, whereas the partition coefficient of F sharply decreases from 3.0 to 1.0 with increasing total F content. The apparent partition coefficients of F between biotite and groundmass (melt) in various magmatic rocks are usually significantly higher than the experimental values. It was supposed that the higher ^Bt/glassD_F values in natural samples could be related to the influence of later oxidation reactions, reequilibration of biotite at continuously decreasing \(f_{H_2 O} \)/f _HF ratio, and an increase in this coefficients with decreasing total F content in the system.