Dense-media separation as a more efficient pollen extraction method for use with organic sediment/deposit samples: comparison with the conventional method

Dense-media separation, frequently adopted as a standard pollen extraction method for use with minerogenic sediment samples, was adapted for use with organic-rich sediment and peat samples. A total of 15 organic-rich sediment samples, obtained from sites in Corsica and the Southern European Alps, was treated using both dense-media separation and the conventional preparation method in order to compare the relative efficiencies of the two methods. The dense-media separation method consistently achieved a remarkably higher purity of extracted pollen grains. This was especially true for the Corsican peat samples, the dense-media separations being quite pure, whereas the classical method produced samples that were so severely polluted with organic fragments that it was impossible to carry out a satisfactory pollen analysis. The percentage values of each taxon were generally similar using both methods, showing that the two methods are compatible for pollen analytical studies. Total pollen concentrations were generally higher with the dense-media separation method (especially for gyttja samples). In conclusion, dense-media separation is an efficient method for pollen extraction from organic as well as from minerogenic sediments and deposits.     

Mass Spectrometric Isotope Dilution Determination of Cadmium in Geochemical Reference Samples

Twenty seven geochemical reference samples have been analysed for cadmium using the stable isotope dilution technique. These include four USGS, one NBS, five CRPG, eleven ANRT and six NIMROC samples. Each sample has been analysed at least in duplicate.
The four USGS samples have previously been measured in this laboratory by Rosman and De Laeter, but the present results are believed to be more accurate than the earlier data. Our results for the other twenty three samples are much lower than most of the published data. There is also evidence of cadmium inhomogeneities in some of the samples.     

Mass Spectrometric Isotope Dilution Analyses Of Barium in Geochemical Reference Samples

Twenty-four geochemical reference samples have been analysed far barium using the stable isotope dilution technique. These include five CRPG, ten ANRT, six Nimroc and two CCRMP samples together with the Tonalite from Tanzania, Duplicate analyses have been made in each case and our values for barium are believed to be accurate to approximately 3 %. In general, our results are in good agreement with the published data except for Nimroc samples where our data are consistently lower than the presently accepted values. No evidence of sample inhomogeneities was observed in the present work.     

浅地层剖面仪在港池探测中的应用

介绍了3200XS型浅地层剖面仪工作原理及其数据处理过程,在港池开挖前进行浅地层剖面测量可以详细了解港池内各地层单元的分布和埋深,并对区内的灾害地质体或者障碍物进行有效识别,以保障施工安全和节约工程支出;结合海南某港池的浅剖探测实例,分析了该港池的地层单元划分及地层内物质识别,针对浅地层剖面测量前发射参数的选择和测量中的多次回波、调头区变形等问题等进行了探讨。     

基于DSP TMS320VC5509A图像采集的脱机系统设计与实现

首先介绍了脱机系统的结构,并给出系统中核心芯片DSP TMS320VC5509A与存储芯片EEPROMAT25640的硬件电路设计方案,从该DSP的各种BOOTLOADER方式中分析研究,考虑到烧写速度及电路设计简洁性等因素,采用了SPI EEPROM模式。随后介绍了加载过程中的数据表——BOOT表的概念及生成方式,详细介绍了程序烧写至存储器的过程及软件实现的流程图,最终用一个实例实现系统的脱机运行。     

基于MSP430F135的货车防盗报警系统设计

针对当前铁路运营的实际情况,设计并实现了基于MSP430F13x系列单片机的货车防盗报警系统.详细介绍了系统的原理和软、硬件设计.系统在货车遭遇破封的情况下触发报警器,并将报警信息以无线电信号发射出去.接收机接收报警信息并将其在LCD上显示出来,以便民警即时处理.经实际应用证明系统性能良好.     

Mössbauer study of Meridiani Planum,the first iron‐nickel meteorite found on the surface of Mars by the MER Opportunity

Abstract— –Meridiani Planum is the first iron meteorite found on Mars. It was discovered in 2005 by the Mars Exploration Rover Opportunity (MER‐B). Mössbauer spectra (MS) of the unbrushed and brushed meteorite species were acquired in 10 degrees temperature windows in the range of 210–260 K. Earlier examinations of these MS have led to the conclusion that the meteorite, which contains ～～7 wt% Ni, belongs to the IAB meteorite group. Here, making use of a recently developed calibration/folding procedure for MER MS, we report the results of the MS analyses for the single temperature windows m5 (210–220 K), m6 (220–230 K), m7 (230–240 K), and m89 (240–260 K). All spectra consist of a sextet and a ferric doublet. The hyperfine field of the sextet, extrapolated to room temperature, is ～～34.5 T, which is, based on Mössbauer studies of meteorites found on Earth, indeed consistent with the presence of kamacite. The fractional spectral area of the sextet is ～～0.96 of the total spectrum. The ferric doublet has an average quadrupole splitting of 0.70 mm/s and is not diagnostic of any specific Fe mineral.     

P–T–t evolution and textural evidence for decompression of Pan-African high-pressure granulites, Lurio Belt, north-eastern Mozambique

Pan‐African high‐pressure granulites occur as boudins and layers in the Lurio Belt in north‐eastern Mozambique, eastern Africa. Mafic granulites contain the mineral assemblage garnet + clinopyroxene + plagioclase + quartz ± magnesiohastingsite. Garnet porphyroblasts are zoned with increasing almandine and spessartine contents and decreasing grossular and pyrope contents from core (Alm₄₆Prp₃₂Grs₂₁Sps₂) to rim (Alm₅₂Prp₂₆Grs₁₉Sps₃). This pattern is interpreted as a retrograde diffusion zoning with the preserved core chemistry representing the peak metamorphic composition. Mineral reaction textures occur in the form of monomineralic and composite plagioclase ± orthopyroxene ± amphibole ± biotite ± magnetite coronas around garnet porphyroblasts. Thermobarometry indicates peak metamorphic conditions of up to 1.57 ± 0.14 GPa and 949 ± 92 °C (stage I), corresponding to crustal depths of ～55 km. Zircon yielded an U–Pb age of 557 ± 16 Ma, inferred to date crystallization of zircon during peak or immediately post‐peak metamorphism. Formation of plagioclase + orthopyroxene‐bearing coronas surrounding garnet indicates a near‐isothermal decompression of the high‐pressure granulites to lower pressure granulite facies conditions (stage II). Development of plagioclase + amphibole‐coronas enclosing the same garnet porphyroblasts shows subsequent cooling into amphibolite facies conditions (stage III). Symplectitic textures of the corona assemblages indicate rapid decompression. The high‐pressure granulite facies metamorphism of the Lurio Belt, followed by near‐isothermal decompression and subsequent cooling, is in accordance with a long‐lived tectonic history accompanied by high magmatic activity in the Lurio Belt during the late Neoproterozoic–early Palaeozoic East‐African–Antarctic orogeny.