内蒙古敖包吐萤石矿床的Sr、Nd、Pb同位素地球化学特征

敖包吐萤石矿床是内蒙古北部苏莫查干地区单一萤石矿集区中的一个代表性矿床,产于早二叠世大石寨组火山-沉积岩与早白垩世敖包吐花岗岩的接触带上。文章通过分析该矿床岩、矿石的微量元素和稀土元素,揭示出萤石的成矿作用可分为2个阶段,即交代作用和充填作用。交代作用过程中大石寨组的结晶灰岩可能为萤石的形成提供了部分Ca来源,萤石矿石的稀土元素配分模式与海水基本类似,具有Ce负异常;成矿作用后期主要表现为充填作用,形成颗粒粗大的萤石,表现为重稀土元素富集的特征,并随着萤石的沉淀析出,稀土元素总量逐渐下降,反映出成矿流体经历了较长期的演化过程。各地层单元、花岗岩体和萤石矿石的Sr、Nd、Pb同位素研究表明,萤石的放射性同位素组成具有壳、幔源混合的特点,成矿物质来源具有多源性。早白垩世敖包吐花岗岩可能是萤石中F的主要来源,而大石寨组的结晶灰岩则可能提供了Ca。另外,Pb、Nd同位素的极大不均一性,有可能是成矿流体在运移过程中对艾力格庙群放射性组分的选择性吸收的结果。萤石成矿作用与钾玄岩的时空关系暗示了萤石的成矿过程可能是中国东部岩石圈减薄和下地壳的置换地质事件的结果。在构造转型的过程中,燕山中期富碱的酸性花岗岩浆的活动分异出富含F的成矿流体,与幔源流体混合,沿区域重新活化的深大断裂和大石寨组的层间破碎带上升,交代其间的灰岩透镜体,从而形成敖包吐中型萤石矿床。     

秦岭造山带的印支运动及印支期成矿作用

秦岭碰撞造山经历了长期的板块构造的俯冲-碰撞的构造演化,于印支期最终完成对接拼合,形成了统一的中国大陆,并由此转入陆内变形。众多Au、Mo多金属矿床的同位素年龄资料表明,印支期是秦岭的重要成矿期,其成矿作用明显受到构造演化的控制,反映特定的地球动力学背景和作用过程。秦岭印支期成矿作用不仅是中国东部中生代成矿作用的先导和开始,奠定了中国东部中生代成矿大爆发的基础,而且为碰撞期和碰撞期后构造体制快速转换的研究提供了依据。重视秦岭以及中国印支期成矿作用的研究,对正确认识秦岭成矿带的区域成矿规律、造山带演化的深部动力学过程,建立符合中国和东亚实际的印支期成矿理论体系具有重要科学意义。     

柴达木盆地北缘侏罗系不同沉积环境烃源岩生物标志物特征及其应用

柴达木盆地北缘地区侏罗系(中下侏罗统)的优质烃源岩主要发育于湖相与三角洲相环境。研究了不同时代、不同沉积环境中烃源岩的生物标志物组成特征,结果发现,有3类化合物的分布与组成差异显著,包括三环萜烷(C19、C20、C21)的分布型式、重排藿烷的丰度以及规则甾烷的相对组成。其中,不同时代的差异主要体现在规则甾烷组成上;而不同沉积环境的差异主要体现为三环萜烷(C19、C20、C21)的分布型式及重排藿烷的丰度。分析认为,这些差异与烃源岩的沉积环境及其生源组成有密切关系。据此,初步将这些参数应用于两方面研究,一是为划分地层沉积环境提供“生物标志物相标志”,二是研究油源对比,取得良好效果。因此,本文研究结果具有重要实用价值与参考意义。     

力马河镍矿Re-Os同位素研究

四川力马河镍矿是峨眉山大火成岩省一个重要的岩浆硫化物矿床。本文通过对其主要岩、矿石类型Re、Os及其同位素组成的分析,综合探讨了成矿岩体原始岩浆性质、矿石硫化物成因、成矿机制及Re-Os同位素等时线年龄。结果表明,力马河镍矿不同类型岩矿石样品初始Os同位素组成是不均一的,富硫化物的网脉状矿石及其选纯硫化物Os同位素组成初值差异较小,其等时线年龄为265±35 Ma、与岩体锆石SHRIMP年龄263±3 Ma基本相当;硫化物含量较低的岩、矿石样品间初始Os同位素组成差异较大,其表观等时线年龄大于成矿年龄。分析认为,岩矿样品初始Os同位素组成的不均一是由含较高放射成因187Os丰度的硫化物熔体和含较低放射成因187Os丰度的硅酸盐熔体不同比例混合造成的。混合模型分析表明,硫化物含量超过30％的矿石样品初始187Os/188Os基本接近,硫化物含量低于30％的岩矿石样品初始187Os/188Os随硫化物含量上的不同差异很大,为岩浆硫化物矿床Re-Os等时线年龄可能出现多组年龄解的现象提供了一种可能的解释。成矿岩体中含放射成因187Os丰度最低的岩石样品γOs（t=260Ma）在5左右、Cu/Pd比值在7000左右,表明是基本没有受到地壳混染及硫化物熔离影响的原始岩浆结晶分异产物,估计原始岩浆Os含量在1×10－9左右,为苦橄质岩浆。矿石硫化物Re/Os比值显著高于任何赋矿橄榄岩,γOs（t=260Ma）高达110左右,综合分析揭示了力马河镍矿硫化物为二次熔离成因,模式分析认为,矿石硫化物是由原始岩浆经历R=2000左右的硫化物熔离后、其亏损岩浆再经R=200左右的硫化物熔离形成,与二次熔离相对应,成矿岩浆也经历了两次混染作用,分别为上、下地壳7％左右的混染。     

Zircon U–Pb ages, Hf and O isotopes constrain the crustal architecture of the ultrahigh-pressure Dabie orogen in China

The crustal structure of the Dabie orogen was reconstructed by a combined study of U–Pb ages, Hf and O isotope compositions of zircons from granitic gneiss from North Dabie, the largest lithotectonic unit in the orogen. The results were deciphered from metamorphic history to protolith origin with respect to continental subduction and exhumation. Zircon U–Pb dating provides consistent ages of 751 ± 7 Ma for protolith crystallization, and two group ages of 213 ± 4 to 245 ± 17 Ma and 126 ± 4 to 131 ± 36 Ma for regional metamorphism. Majority of zircon Hf isotope analyses displays negative ε_Hf(t) values of − 5.1 to − 2.9 with crust Hf model ages of 1.84 to 1.99 Ga, indicating protolith origin from reworking of middle Paleoproterozoic crust. The remaining analyses exhibit positive ε_Hf(t) values of 5.3 to 14.5 with mantle Hf model ages of 0.74 to 1.11 Ga, suggesting prompt reworking of Late Mesoproterozoic to Early Neoproterozoic juvenile crust. Zircon O isotope analyses yield δ¹⁸O values of − 3.26 to 2.79‰, indicating differential involvement of meteoric water in protolith magma by remelting of hydrothermally altered low δ¹⁸O rocks. North Dabie shares the same age of Neoproterozoic low δ¹⁸O protolith with Central Dabie experiencing the Triassic UHP metamorphism, but it was significantly reworked at Early Cretaceous in association with contemporaneous magma emplacement. The Rodinia breakup at about 750 Ma would lead to not only the reworking of juvenile crust in an active rift zone for bimodal protolith of Central Dabie, but also reworking of ancient crust in an arc-continent collision zone for the North Dabie protolith. The spatial difference in the metamorphic age (Triassic vs. Cretaceous) between the northern and southern parts of North Dabie suggests intra-crustal detachment during the continental subduction. Furthermore, the Dabie orogen would have a three-layer structure prior to the Early Cretaceous magmatism: Central Dabie in the upper, North Dabie in the middle, and the source region of Cretaceous magmas in the lower.     

Case history of controlling a landslide at Panluo open-pit mine in China

Controlling of landsides safely and economically is a great challenge to mine operators because landslides are major geological problems especially in open-pit mines. In this paper, a case history at Panluo open-pit mine is presented in detail to share the experiences and lessons with mine operators. Panluo open-pit mine is located in the southwestern Fujian province of China. It is the largest open-pit iron mine in the Fujian province and was planned in 1965 and is in full operation from 1978. In July 1990, an earthquake of magnitude 5.3 in Taiwan Strait and big rainstorms impacted the mine slope, causing tension cracks and rather large-scale failures, and forming a U-shaped landslide. Total potential volume was estimated to be up to 1.0 × 10⁶ m³. This directly threatened the mine production. In order to protect the mine production and the dwellers’ safety around, a dynamic comprehensive method was implemented including geotechnical investigations, in-situ testing and monitoring, stability analysis, and many mitigation and preventive measures. These measures slowed down the development and further occurrence of the landslide. The results showed that the landslides were still active, it was slowed with the control measures and moved rapidly with rainfall and mining down. However, no catastrophic accidents occurred and the pit mining was continued till it was closed at the elevation of 887 m in 2000. As a successful case of landslide control at an open-pit mine for 10 years, this paper reports the controlling measures in details. These experiences of landslide control may be beneficial to other similar mines for landslide control.     

Assessment of frozen-ground conditions for engineering geology along the Qinghai–Tibet highway and railway, China

The Qinghai–Tibet Highway and Railway (the Corridor) across the Qinghai–Tibet Plateau traverses 670 km of permafrost and seasonally frozen-ground in the interior of the Plateau, which is sensitive to climatic and anthropogenic environmental changes. The frozen-ground conditions for engineering geology along the Corridor is complicated by the variability in the near-surface lithology, and the mosaic presence of warm permafrost and talik in a periglacial environment. Differential settlement is the major frost-effect problem encountered over permafrost areas. The traditional classification of frozen ground based on the areal distribution of permafrost is too generalized for engineering purposes and a more refined classification is necessary for engineering design and construction. A proposed classification of 51 zones, sub-zones, and sections of frozen ground has been widely adopted for the design and construction of foundations in the portion of the Corridor studied. The mean annual ground temperature (MAGT), near-surface soil types and moisture content, and active faults and topography are most commonly the primary controlling factors in this classification. However, other factors, such as local microreliefs, drainage conditions, and snow and vegetation covers also exert important influences on the features of frozen ground. About 60% of the total length of the Corridor studied possesses reasonably good frozen-ground conditions, which do not need special mitigative measures for frost hazards. However, other sections, such as warm and ice-rich or -saturated permafrost, particularly in the sections in wetlands, ground improvement measures such as elevated land bridges and passive or proactive cooling techniques need to be applied to ensure the long-term stability of thermally unstable, thick permafrost subsoils, and/or refill with non-frost-susceptible soils. Due to the long-history of the construction and management of the Corridor by various government departments, adverse impacts of construction and operation on the permafrost environment have been resulted. It is recommended that an integrated, executable plan for the routing of major construction projects within this transportation corridor be established and long-term monitoring networks installed for evaluating and mitigating the impact from anthropogenic and climatic changes in frozen-ground conditions.     

An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Soil n-alkane δD vs. altitude gradients along Mount Gongga, China

The altitude effect on the isotopic composition of precipitation and its application to paleoelevation reconstruction using authigenic or pedogenic minerals have been intensively studied. However, there are still no studies on variations in biomarker δD along altitude transects to investigate its potential as a paleoelevation indicator, although it has been observed that δD of higher plant lipid may record changes in precipitation δD (δD_p). Here, we present δD values of higher plant-derived C₂₇, C₂₉, and C₃₁n-alkanes from surface soil along the eastern slope of Mount Gongga, China with great changes in physical variables and vegetation over a range from 1000 to 4000 m above sea level. The weighted-mean δD values of these n-alkanes (δD_wax) show significant linear correlations with predicted δD_p values (R² = 0.76) with an apparent isotopic enrichment (ε_wax-p) of −137 ± 9‰, indicating that soil δD_wax values track overall δD_p variation along the entire altitudinal transect. Leaf δD_wax is also highly correlated with mountain altitude by a significant quadratic relationship (R² = 0.80). Evapotranspiration is found declining with altitude, potentially lowering δD_wax values at higher elevations. However, this evapotranspiration effect is believed to be largely compensated by the opposing effect of vegetation changes, resulting in less varied ε_wax-p values over the slope transect. This study therefore confirms the potential of using leaf δD_wax to infer paleoelevations, and more generally, to infer the δD of precipitation.