Relationship of intertidal surface sediment chlorophyll concentration to hyperspectral reflectance and chlorophyll fluorescence

Estimating biomass of microphytobenthos (MPB) on intertidal mud flats is extremely difficult due to their patchy occurrence, especially at the scale of an entire mud flat. We tested two optical approaches that can be applied in situ: spectral reflectance and chlorophyll fluorescence. These two approaches were applied in 4 European estuaries with different sediment characteristics. At each site, paired replicate measurements of hyperspectral reflectance, chlorophyll fluorescence (after 15 min dark adaptation, F_o ¹⁵), sediment water content, and chlorophylla concentrations were taken (including breakdown products: [chla+phaeo]). Sediments were further characterized by grain size and organic content analysis. The spectral signatures of tidal flats dominated by benthic microalgae, mainly diatoms, could be easily distinguished from sites dominated by macrophytes; we present a 3 waveband algorithm that can be used to detect the presence of macrophytes. The normalized difference vegetation index (NDVI) was found to be most strongly correlated to sediment [chla+phaeo], except for the predominantly sandy Sylt stations. F_o ¹⁵ was also significantly correlated to sediment [chla+phaeo] in all but one grid (Sylt grid A). Our results suggest that the functional relationships (i.e., the slopes) between NDVI or fluorescence and [chla+ phaeo] were not significantly different in the muddier grids, although the intercepts could differ significantly, especially for F_o ¹⁵. This suggests a mismatch of the optical depth seen by the reflectometer or fluorometer and the depth sampled for pigment analysis. NDVI appears to be a robust proxy for sediment [chla+phaeo] and can be used to quantify MPB biomass in muddy sediments of mid latitude estuaries.     

Displacement-length scaling relations for faults on the terrestrial planets

Displacement-length (D/L)scaling relations for normal and thrust faults from Mars, and thrust faults from Mercury, for which sufficiently accurate measurements are available, are consistently smaller than terrestrial D/L ratios by a factor of about 5, regardless of fault type (i.e. normal or thrust). We demonstrate that D/L ratios for faults scale, to first order, with planetary gravity. In particular, confining pressure modulates: (1) the magnitude of shear driving stress on the fault; (2) the shear yield strength of near-tip rock; and (3) the Young's (or shear) modulus of crustal rock. In general, all three factors decrease with gravity for the same rock type and pore-pressure state (e.g. wet conditions). Faults on planets with lower surface gravities, such as Mars and Mercury, demonstrate systematically smaller D/L ratios than faults on larger planets, such as Earth. Smaller D/L ratios of faults on Venus and the Moon are predicted by this approach, and we infer still smaller values of D/L ratio for faults on icy satellites in the outer solar system. Collection of additional displacement-length and down-dip height data from terrestrial normal, strike-slip, and thrust faults, located within fold-and-thrust belts, plate margins, and continental interiors, is required to evaluate the influence of fault shape and progressive deformation on the scaling relations for faults from Earth and elsewhere.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

A subduction wedge origin for Paleoarchean peridotitic diamonds and harzburgites from the Panda kimberlite, Slave craton: evidence from Re–Os isotope systematics

An extensive study of peridotitic sulfide inclusion bearing diamonds and their prospective harzburgitic host rocks from the 53 Ma Panda kimberlite pipe, Ekati Mine, NWT Canada, has been undertaken with the Re–Os system to establish their age and petrogenesis. Diamonds with peridotitic sulfide inclusions have poorly aggregated nitrogen (<30% N as B centers) at N contents of 200–800 ppm which differs from that of chromite and silicate bearing diamonds and indicates residence in the cooler portion of the Slave craton lithospheric mantle. For most of the sulfide inclusions, relatively low Re contents (average 0.457 ppm) and high Os contents (average 339 ppm) lead to extremely low ¹⁸⁷Re/¹⁸⁸Os, typically << 0.05. An age of 3.52 ± 0.17 Ga (MSWD = 0.46) and a precise initial ¹⁸⁷Os/¹⁸⁸Os of 0.1093 ± 0.0001 are given by a single regression of 11 inclusions from five diamonds that individually provide coincident internal isochrons. This initial Os isotopic composition is 6% enriched in ¹⁸⁷Os over 3.5 Ga chondritic or primitive mantle. Sulfide inclusions with less radiogenic initial Os isotopic compositions reflect isotopic heterogeneity in diamond forming fluids. The harzburgites have even lower initial ¹⁸⁷Os/¹⁸⁸Os than the sulfide inclusions, some approaching the isotopic composition of 3.5 Ga chondritic mantle. In several cases isotopically distinct sulfides occur in different growth zones of the same diamond. This supports a model where C–O–H–S fluids carrying a radiogenic Os signature were introduced into depleted harzburgite and produced diamonds containing sulfides conforming to the 3.5 Ga isochron. Reaction of this fluid with harzburgite led to diamonds with less radiogenic inclusions while elevating the Os isotope ratios of some harzburgites. Subduction is a viable way of introducing such fluids. This implies a role for subduction in creating early continental nuclei at 3.5 Ga and generating peridotitic diamonds.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

A simple hypoplastic model for normally consolidated clay

The paper presents a simple constitutive model for normally consolidated clay. A mathematical formulation, using a single tensor-valued function to define the incrementally nonlinear stress–strain relation, is proposed based on the basic concept of hypoplasticity. The structure of the tensor-valued function is determined in the light of the response envelope. Particular attention is paid towards incorporating the critical state and to the capability for capturing undrained behaviour of clayey soils. With five material parameters that can be determined easily from isotropic consolidation and triaxial compression tests, the model is shown to provide good predictions for the response of normally consolidated clay along various stress paths, including drained true triaxial tests and undrained shear tests.     

Temporal patterns of suspended sediment yield following moderate to extreme hydrological events recorded in varved lacustrine sediments

A 487‐year annually laminated (varved) sediment record from Nicolay Lake, Cornwall Island, in the Canadian High Arctic was evaluated to determine the impact that years with high sediment yields had on sediment yields in subsequent years. All of the 40 largest years showed evidence for increased sediment yield in the subsequent 10–30 years. The positive anomalies in lagging years were approximately scaled according to the size of the initiating year, although many intermediate years (25‐ to 100‐year recurrence) showed weak or variable responses. The smallest events considered (10‐ to 25‐year recurrence) showed a consistent, but low‐amplitude response. Additionally the 10‐year events revealed frequent negative sediment yield anomalies in the preceding decade. This behaviour was interpreted as a frequent sediment activation cycle initiated by the modest year, and leading to sediment yield hysteresis lasting 15–25 years. The largest years (greater than 50‐year recurrence) showed consistently above‐average sediment yields in the preceding decade, in part due to the frequent occurrence of moderate (Q₁₀) years. It is hypothesized that temporary storage of sediment and previous initiation of erosion sites resulted in extraordinary sediment yields during intense summer rainfall events. This study demonstrates the potential use of varved lake sediment records to improve our understanding of long‐term sediment dynamics. These records present an opportunity to further develop and test sediment dynamic and routing models to gain insight into the interaction of time and space in fluvial and sediment delivery processes. Copyright © 2002 John Wiley & Sons, Ltd.