Investigation of bio-ethanol steam reforming over cobalt-based catalysts

The catalytic performance of cobalt catalysts supported on γ-Al₂O₃, TiO₂, ZrO₂ were studied for bio-ethanol steam reforming (BESR) reaction. The supported catalysts (10 wt%Co) were prepared by impregnation and characterized through Thermogravimetric analysis (TGA), H₂ chemisorption, laser Raman Spectroscopy, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), and temperature-programmed reaction (TPRxn). The metallic cobalt sites were found to correlate with the BESR reaction activity. The reaction and H₂ chemisorption showed that ZrO₂ supported catalyst showed the best dispersion and best catalytic activity. Over the 10% Co/ZrO₂ catalyst, using a H₂O:EtOH:inert molar ratio of 10:1:75 and a GHSV = 5000 h⁻¹, 100% ethanol conversion and a yield of 5.5 mol H₂/mol EtOH were obtained at 550 °C and atmospheric pressure.     

从4M1E五方面严控大体积砼施工质量

建（构）筑物结构断面最小尺寸超过800mm的砼施工，称为大体积砼施工。大体积砼在建（构）筑物中多为设备基础、储罐基础，在高层建筑中多为厚大的桩基承台或基础底版。其上有巨大的荷载，整体性要求较高，往往不允许留施工缝，要求一次连续浇筑完毕；另外由于其截面大，水泥用量大，水泥水化释放的水化热会产生较大的温度变化，由此产生的温度应力会导致砼裂缝的形成和发展，因而带来严重的危害。因此砼浇筑时为保证结构的整体性和施工的连续性，尽量避免和防止砼裂缝的产生和发展，可从4M1E（人、机、料、法、环）五个方面严格把关，采取一系列措施确保砼的施工质量。     

电子垃圾邮件过滤技术的应用

垃圾邮件过滤技术是近几年产生的新兴技术,随着电子邮件应用的普及,垃圾邮件也开始越来越困扰着人们,如何有效的防范垃圾邮件的侵扰,是人们急需解决的问题。本文针对垃圾邮件过滤器的使用,简要介绍了黄委会电子邮件系统中的垃圾邮件过滤技术的应用情况。     

催化剂组成对酸-碱交替沉淀法制备铜基甲醇合成催化剂的影响

采用酸-碱交替沉淀法制备了一种新型的低压甲醇合成催化剂。研究了催化剂组成的影响。当Al和Zr含量固定,随着Cu/Zn摩尔比的增加,催化剂活性先升高后下降,当Cu/Zn摩尔比为1时,活性最高。XRD结果表明,Cu/Zn摩尔比为1时制备的催化剂CuO与ZnO组分间相互均匀分散程度最大。Zr较明显地提高催化剂的活性和耐热性,Mn对催化剂的耐热性提高有一定的作用,La和Ce对提高催化剂活性的作用不大。     

氯乙烯生产控制系统的改造

介绍了横河公司的分布式控制系统CS3000在氯乙烯生产过程中的应用情况,阐述了该系统的工艺流程、硬件配置、软件配置和主要功能。     

微通道中两相流压降与传质的研究

以氮气和水为实验体系,采用均质混合模型,研究微混合器的微通道中两相流通过微通道的压降,并测定了两相流的传质系数.结果表明,微通道当量直径为95.2 μm,气体速率为1.089～4.355 m/s,液体速率为0.006 41～0.170 90 m/s的条件下,均质混合模型计算压降值与实测值吻合良好.气速为1.633～3.484 m/s,液速为0.025 6 m/s时,随着气速增加,传质系数呈递增的趋势.气速为1.633～3.484 m/s,液速为0.019 2 m/s时,随着气速增加,传质系数先增加后降低然后再增加.传质系数对液速变化更为敏感.     

X波段85W功率放大模块微带电路设计

针对X波段50 W GaN功放管电路进行改进设计,在满足原有指标的条件下,同时提高电路工作稳定性;巧妙改变微波电路结构,去除了原电路所用的电感,并在不影响电路指标的前提下适当减少了电容、电阻的用量,为整个电路的设计节约了成本。同时,仿真并制作了Wilkinson功分功合器。最终得到85 W功率放大模块,并给出了测试结果。     

Preparation and properties of polyelectrolyte complex sponges composed of hyaluronic acid and chitosan and their biological behaviors

Polyelectrolyte complexes (PECs) composed of chitosan and hyaluronic acid (HA) were prepared in various pH regions and at different weight ratios. At low pHs, there was a strong ionic interaction between NH groups in chitosan and both COO^? and COOH groups in HA due to the deprotonation of HA, whereas weak linkages were formed at high pHs because only the carboxyl groups of HA could interact with NH groups in chitosan. The formation of PECs resulted in a decrease in the crystallinity and thermal stability caused by the interactions between polyions. With variations in the degree of ionization of polyions at various pH conditions, novel PEC sponges were prepared by the freeze drying of PEC solutions. Furthermore, for the evaluation of the wound‐healing effect of PEC sponges with or without an antimicrobial agent (silver sulfadiazine), they were applied to a full‐skin defect of a Wistar rat in vivo. The histology and computerized morphometric analysis of the epidermal healing confirmed the proliferation of fibroblasts in the wound bed and a distinct reduction in infectious agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 925–932, 2003     

高耐蚀性Zn—Co合金镀层钝化工艺的研究

研究了电镀Zn-Co合金镀层的钝化液的组成及工艺条件，溶液各成分及工艺条件对钝化膜质量的影响，通过几种腐蚀试验方法，测量了钝化膜的耐蚀性，结果表明，研究的钝化工艺可以得到耐蚀性良好的钝化膜。     

多孔陶瓷分离膜

多孔陶瓷膜由于其优良的耐高温、耐腐蚀、耐微生物侵蚀等性质，近年来被快速地应用于分离领域。本文介绍其制备方法、性能测定及应用前景。