The relationship between the molecular weight and the critical miscibility composition of a solvent-nonsolvent-terpolymer system

A theoretical equation for the dependence of the apparent molecular weight measured by light scattering on the solvent used has been derived with regard to the composition heterogeneity. Terpolymers corresponding to a partial azeotrope were synthesized from styrene, acrylonitrile, and methyl methacrylate with mole fractions of 0.55, 0.16, and 0.29, respectively. The molecular weight measured by light scattering was found to be independent of the solvent used. Therefore the terpolymer was concluded to be apparently homogeneous in composition. The relationship between the molecular weight M of the terpolymer and the volume fraction of the nonsolvent γ in the solvent mixture at the precipitation point in a butanone-methanol-terpolymer system was experimentally proved to follow the equation where γ₀ and b′ are constants. Between the molecular weight and the limiting viscosity number [η] of the terpolymer the following relationships are valid at 35°C: and      

Studies on ion-exchange membranes. XXXII. Heterogeneity in ion-exchange membranes

Twelve kinds of cation-exchange membranes were treated with hydrogen peroxide. Some of them (Selemion CMV, Nepton CR-61, Scrion C-100, SAM-1) were completely destroyed. Heterogeneity is believed to be present in that part of their chemical structures that is decomposable by the treatment. The other membranes were converted into porous membranes by the decomposition of the resinous part. Water permeabilities and electric resistances of the porous membranes were examined to evaluate the pore radius. It was concluded that the “paste method” membranes have a heterogeneity or localized distribution of the resinous part under 50 mμ. The “paste method” membranes seemed to resemble the “graft method” membranes in chemical structure and to be much different from the mosaic-type membranes such as Permaplex and MC-3142. These results were also supported by extraction of the membranes with appropriate solvents and observation by electron microscopy.     

In Situ Observation of Zirconia Particles at 1200°C by High-Resolution Electron Microscopy

Zirconia (ZrO₂) particles (average diameter, 30 nm) were observed in an in situ heating experiment up to 1200°C using a 400-kV high-resolution electron microscope. Thermal vibration of atoms on a (001) surface plane was observed at 1100°C. At 1200°C, grain growth and sintering phenomena were recorded on a videotape, showing (100) lattice planes migrating on a surface of a particle. Direct observation of the sintering process on a lattice level was accomplished for the first time.     

A facile chemical synthesis of cholest-4-en-3-one. Carbon-13 nuclear magnetic resonance spectral properties of cholest-4-en-3-one and cholest-5-en-3-one

This paper presents a simplified method for the chemical synthesis of cholest-4-en-3-one, which is a naturally occurring steroid and a salient intermediate in steroid chemistry. Pyridinium chlorochromate (PCC) in refluxing benzene has been found to be an effective and convenient reagent for the oxidation and concomitant isomerization of cholest-5-en-3β-ol (cholesterol) to cholest-4-en-3-one in high yield. Also described are the carbon-13 nuclear magnetic resonance spectral properties of cholest-4-en-3-one and of the isolated reaction intermediate cholest-5-en-3-one. Based on a paper presented at the Symposium on Plant and Fungal Sterols: Biosynthesis Metabolism and function held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

Reactions of phenols with tung oil

As regards the aromatic ring substitution reactions of various kinds of phenols with tung oil under acidic conditions, an investigation was made on the influences of the kinds and substitution positions of alkyl groups of the phenlos on the reaction. Alkyl phenols increased in reactivity in the order of ortho, meta, and para in the position of alkyl substitution. This can be attributed to the preferential para addition of tung oil to the phenol nucleus as reported in the previous paper. The larger alkyl group gave increased reactivities in the reactions of alkyl phenols with tung oil. This has something to do with compatibilities between phenols and tung oil (differences in solubility parameter between phenols and tung oil).     

Effect of pre-oxidation on reactivity of chars in steam

The effects of pre-oxidation of char from Taiheiyo coal, a non-caking bituminous coal, in the 400–550 °C temperature range on its gasification reactivity with N₂-H₂O at 0.1 MPa (steam partial pressure of 13.2 kPa) have been investigated. The pre-oxidation of char markedly enhances gasification rates at temperatures between 800 and 900 °C. Reactivity is found to parallel the burn-off level during preoxidation at low temperatures (400–430 °C), whereas at relatively high temperatures (480–550 °C), the burn-off level only affects the reactivity slightly. The amount of CO and CO₂ evolved from the preoxidized char by heat treatment is proportional to the burn-off level at low temperatures (400–430 °C), being closely related to the enhancement of the gasification reactivity in steam.     

Larval osmeterial secretions of the swallowtails (Papilio)

The larval osmeterial secretions of sixPapilio species examined displayed a remarkable qualitative change at the fourth larval ecdysis. The secretions of 4th (penultimate) instar larvae ofP. machaon, P. memnon, P. helenus, P. bianor, andP. maackii principally comprised mono- and/or sesquiterpenoids. The compounds identified from these species included -pinene, sabinene, -myrcene, limonene, -phellandrene, (Z)--ocimene, (E)--ocimene, -elemene, -caryophyllene, (E)--farnesene, -selinene, (E,E)--farnesene, germacrene-A, germacrene-B, caryophyllene oxide, methyl 3-hydroxy-n-butyrate, and acetic acid. In contrast, the secretion of 4th larval instar ofP. xuthus, although containing similar terpenic compounds, was accompanied by large amounts of aliphatic acids and their esters: isobutyric acid, 2-methylbutyric acid, methyl isobutyrate and methyl 2-methylbutyrate. On the other hand, the osmeterial secretions of 5th (last) instar larvae varied little in quality among the six species, and the identified compounds consisted of isobutyric acid, 2-methylbutyric acid, methyl isobutyrate, ethyl isobutyrate, methyl 2-methylbutyrate, ethyl 2-methylbutyrate, and isovaleric acid, the last of which was specific toP. bianor andP. maackii. The chemical alteration of osmeterial exudate synchronized at the final larval ecdysis with the larval morphological change (particularly in body coloration) that appears to be of defensive significance against predators.     

Conformational studies of poly(N-methyl-l-alanine) by n.m.r. spectroscopy

Nuclear magnetic resonance (n.m.r.) and circular dichroism of $\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ in methylene $\text{chloride}\text{-d}{}_2\text{dichloroacetic acid}$ were investigated. In methylene chloride-d₂$\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ was found to consist of nearly all-trans amide bonds and assume a stable secondary structure. Trace amounts of cis amide bonds were also present. The addition of dichloroacetic acid destroyed the secondary structure and induced a drastic change of the n.m.r. spectrum, which was similar to that observed with the monomeric amide, $\text{N-}\text{acetyl}\text{-N-}\text{methyl-}\text{l}\text{-alanine}$ dimethylamide. In comparison of the polymer with the monomeric amide, it was concluded that the transition of $\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ was caused by the isomerization of amide bonds. The complex n.m.r. spectrum was interpreted in terms of the distribution along the polymer chain of various non-planar amide links as well as planar cis and trans amide links. The difference of the mechanism of conformational transition between poly(amino acid) and poly(imino acid) is also discussed.     

Reflection-grating self-pumped phase conjugation with optical feedback free of input conditions

A reflection-grating self-pumped phase-conjugate mirror is demonstrated with a photorefractive KNbO(3) crystal in a novel ring configuration. The feedback beam in the ring configuration is made to track the input probe beam automatically so that the phase conjugation is sustained without readjustment of the optical feedback loop when the angle or the position of the input probe beam is changed. The tracking feedback is realized by means of a simple three-lens erect imaging system. The angular and the positional acceptances for a tightly focused input beam of 50-μm diameter are Δθ(x). = 55 mrad, Δθ(y), = 67 mrad, and Δ(x) = 2.1 mm, Δ(y) = 4.2 mm, respectively.