Impact of oxygen transport properties on the kinetic modeling of polypropylene thermal oxidation. II. Effect of oxygen diffusivity

The kinetic model, established in a previous article (François‐Heude et al., J. Appl. Polym. Sci., in press) to predict the homogeneous oxidation in iPP films typically thinner than 100 µm, is now extended to simulate the oxidation profiles in thicker plates by coupling the oxygen diffusion and its consumption by the chemical reactions. In this perspective, oxygen transport properties (namely oxygen solubility, diffusivity, and permeability) are measured by permeametry on a reference iPP. These values are compared with an exhaustive compilation of literature data to evaluate their variability among the whole iPP family, which one has been reasonably ascribed to initial differences in polymer morphology, but also to evaluate their consistency, especially their temperature dependence between 20 and 140°C. Failing to simulate oxidation profiles, the kinetic model is then used as an inverse resolution method for estimating more satisfactory values of oxygen transport properties. It is thus evidenced that the crystallinity changes induced by thermal oxidation largely explains the dramatic decrease in oxygen penetration toward the sample core just after the induction period. A strategy aimed for introducing the relationship between the polymer crystalline morphology and oxygen transport properties into the kinetic model is given in the graphical abstract, although the effect of polymer polarity remains to be established prior to this implementation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41562.     

Heads or Tails: Genotyping of Hepatitis C Virus Concerning the 2k/1b Circulating Recombinant Form

As different hepatitis C virus (HCV) genotypes respond differently to initiated therapy, correct HCV genotyping is essential. A potential risk for misclassification of the intergenotypic HCV circulating recombinant form (CRF) 2k/1b strains exists, depending on the genotyping method used. The aim was to investigate the differences in HCV genotyping methods with regard to CRF 2k/1b and to gain insight in the prevalence of the CRF 2k/1b. Genotyping results by Versant HCV Genotype Assay were compared with nonstructural protein 5B (NS5B) sequencing. In total, from November 2001 until March 2015, 3296 serum samples were analyzed by Versant HCV Genotype Assay. As misclassified CRF is harbored among HCV genotype 2, we further focused our search on 142 (4.3%) samples positive for HCV genotype 2. On 116 (81.7%) retrieved samples, the NS5B sequencing was performed. Twelve out of the 116 retrieved samples (10.3%) were classified as CRF 2k/1b by sequencing of the NS5B region. Ten of these 12 samples were originally misclassified as genotype 2a or 2c, while 2 of them were misclassified as genotype 2. Our results show that the current prevalence of CRF 2k/1b is underestimated. The importance of correct HCV genotyping is emphasized, considering the tailored choice of treatment regimen and overall prognosis.     

Accessibility at the household level using the Structural Accessibility Layer: A forecast of potential future travel behaviour based on self-selection of residential location

The current paper analysis the differences in accessibility categories at the household level and by lifecycle changes by using the Structural Accessibility Layer. Results are evaluated from spatial, numerical and qualitative perspectives. Main findings show differences in residential preference by a single-person household, couple without children and households with children for different potential accessibility categories. This paper provides evidence that external factors influence the population to move from public transport into car-based mobility. Finally, we observe areas categorized as suitable for both walking and public transport mobility presenting low population density and residential development of those areas is suggested.     

Tubular dentin sealer penetration after different final irrigation protocols: A confocal laser scanning microscopy study

The aim of this study was to evaluate tubular dentin sealer penetration, comparing different final irrigation protocols using a conventional needle (CONV), EndoActivator system (EAS), EndoVac system (EVS), and ultrasound (PUI). Initially, fifty‐two first maxillary molars with a single canal in the palatal root, without abrupt curvatures, resorptive processes, or previous endodontic treatment were selected for this study. Then, the crowns were sectioned to obtain palatal roots 15 mm in length. The root canals were prepared with the ProTaper Universal System and irrigated with 5% NaOCl. Afterwards, the specimens were divided into four groups (n. 13), according to the final irrigation protocol: CONV, EAS, EVS, and PUI. After filling, slices at 3 mm and 5 mm from the apex were obtained for analysis by confocal laser scanning microscopy. Two‐way comparisons between the groups and the levels were performed with Games Howell's test (p < .05). Tubular dentin sealer penetration was higher at 5 mm compared with 3 mm from the apex (p < .05). The EAS group showed a higher percentage of tubular dentin sealer penetration, compared with the CONV group, at both levels. At 3 mm, there was no statistically significant difference among EAS, EVS, and PUI; however, these groups showed better performance, compared with the CONV group. At 5 mm, there was no statistically significant difference between the EAS and EVS groups, but both showed higher sealer penetration than the PUI group (p < .05). The EAS and EVS groups achieved better degrees of tubular dentin sealer penetration, compared with the other groups.     

Photocuring of cycloaliphatic epoxy formulations using polyesters with multiarm star topology as additives

Multiam star polyesters were synthesized by growing poly(ε‐caprolactone) (PCL) arms from hyperbranched polyesters cores of different molecular weight and used as polymeric modifiers in UV‐curable cationic formulations based on a biscycloaliphatic epoxy resin. The effect of the multiarm stars on the curing kinetics has been investigated by real‐time FTIR. The thermal‐mechanical properties of the photocured thermosets have been studied with calorimetry and dynamomechanical and thermogravimetric analysis. Impact strength tests have been performed to assess their effect on the toughness of the cured materials. An accelerative effect of these modifiers has been observed as a consequence of the participation of the hydroxyl groups of the modifiers in the cationic curing of the epoxy resin. A modest increase in toughness accompanied by a decrease in the glass transition are observed, as a consequence of the incorporation of the modifiers into the network structure, leading to homogeneous, in situ reinforced materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40005.     

The Performance of Independent Active SMEs in French Competitiveness Clusters

This article analyses the evolution of independent members of French independent competitiveness clusters. It compares small and medium-sized enterprises (SMEs) that participated in collaborative research projects, funded by French competitiveness clusters, against similar control companies that were not part of such projects and not funded by the policy, over the period 2005–2013. French competitiveness clusters seek to enhance SMEs’ size, performance, innovation and employment; the current study therefore assesses their outcomes in terms of capital invested and equity returns. The findings from a difference-in-differences analysis reveal that sales, employment, R&D investments, and value added all increase in relative terms, but financial returns exhibit significant relative decreases for the smallest companies, whereas larger firms record strong increases. The inability of the smallest SMEs to reap gains from their cluster membership should be a matter of great concern to both companies and policy-makers.