Evaluation of the Anti-Proliferative Activity of Rare Aldohexoses against MOLT-4F and DU-145 Human Cancer Cell Line and Structure-Activity Relationship of D-Idose

D-Allose (D-All), a C-3 epimer of D-glucose (D-Glc), is a naturally rare monosaccharide, which shows anti-proliferative activity against several human cancer cell lines. Unlike conventional anticancer drugs, D-All targets glucose metabolism and is non-toxic to normal cells. Therefore, it has attracted attention as a unique “seed” compound for anticancer agents. However, the anti-proliferative activities of the other rare aldohexoses have not been examined yet. In this study, we evaluated the anti-proliferative activity of rare aldohexoses against human leukemia MOLT-4F and human prostate cancer DU-145 cell lines. We found that D-All and D-idose (D-Ido) at 5 mM inhibited cell proliferation of MOLT-4F cells by 46 % and 60 %, respectively. On the other hand, the rare aldohexoses at 5 mM did not show specific anti-proliferative activity against DU-145 cells. To explore the structure–activity relationship of D-Ido, we evaluated the anti-proliferative activity of D-sorbose (D-Sor), 6-deoxy-D-Ido, and L-xylose (L-Xyl) against MOLT-4F cells and found that D-Sor, 6-deoxy-D-Ido, and L-Xyl showed no inhibitory activity at 5 mM, suggesting that the aldose structure and the C-6 hydroxy group of D-Ido are important for its activity. Cellular glucose uptake assay and western blotting analysis of thioredoxin-interacting protein (TXNIP) expression suggested that the anti-proliferative activity of D-Ido is induced by inhibition of glucose uptake via TXNIP-independent pathway.     

Voltage holding study of 1 MeV accelerator for ITER neutral beam injector

Voltage holding test on MeV accelerator indicated that sustainable voltage was a half of that of ideal quasi-Rogowski electrode. It was suggested that the emission of the clumps is enhanced by a local electric field concentration, which leads to discharge initiation at lower voltage. To reduce the electric field concentration in the MeV accelerator, gaps between the grid supports were expanded and curvature radii at the support corners were increased. After the modifications, the accelerator succeeded in sustaining -1 MV in vacuum without beam acceleration. However, the beam energy was still limited at a level of 900 keV with a beam current density of 150 A∕m(2) (346 mA) where the 3 × 5 apertures were used. Measurement of the beam profile revealed that deflection of the H(-) ions was large and a part of the H(-) ions was intercepted at the acceleration grid. This causes high heat load on the grids and the breakdowns during beam acceleration. To suppress the direct interception, new grid system was designed with proper aperture displacement based on a 3D beam trajectory analysis. As the result, the beam deflection was compensated and the voltage holding during the beam acceleration was improved. Beam parameter of the MeV accelerator was increased to 980 keV, 185 A∕m(2) (427 mA), which is close to the requirement of ITER accelerator (1 MeV, 200 A∕m(2)).     

Successful treatment of severe cytomegalovirus retinitis with foscarnet and intraocular injection of ganciclovir in a myelosuppressed unrelated bone marrow transplant patient

PURPOSE: To compare U.S. medical student Match results in 1996 for 19 categorical residency positions by specialty with those of the overall Match reported by the National Resident Matching Program (NRMP). METHOD: Data for the numbers of "active" senior U.S. student applicants (those who submitted rank lists), the numbers of U.S. seniors matched, and the numbers of unfilled positions for 19 specialties were obtained from a variety of sources. Chi-square analysis was performed to compare Match results for each independent specialty with the overall Match results. The level for statistical significant was set at p < .005. RESULTS: Eight specialties were identified as significantly more competitive than the overall Match process for both the percentage of U.S. seniors who successfully matched in that specialty and the ratio of unmatched U.S. senior applicants to unfilled categorical positions. Five specialties were identified as significantly less competitive for these two measures. Six specialties showed no significant difference in the percentages of U.S. students matching, but for three of these specialties there were more unmatched students than unfilled categorical positions. CONCLUSION: U.S. medical student Match results for categorical residency positions for different specialties vary significantly from the overall Match process. This information can be used in counseling senior medical students on their specialty selection and the residency application process.     

Studies on cardiac ingredients of plants. XIII: Chemical modification of gitoxin to cardiotonic compounds without vascular effect

Nitrated gitoxins (4) and bufotoxin homologues with various lengths of alkyl chain at C-3 of the steroid nucleus (10) were prepared from gitoxin (1). The pharmacological activities of the resulting compounds (4 and 10) were evaluated by measurement of inhibitory effect on NA+, K(+)-adenosine triphosphatase (ATPase) prepared from dog kidney, positive inotropic effect (PIE) on isolated guinea-pig papillary muscle preparations, and the effect on smooth muscle using the mesenteric artery from spontaneously hypertensive rats. Most of the compounds showed a smaller contractile effect on the arterial muscle. Among these compounds, gitoxin 3"-nitrate (4g) exhibited the most desirable biological activities, such as PIE comparable to that of 1, 1.25 times wider concentration-dependent range than 1, and lack of contractile activity on vascular muscle.     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Carbon-supported growth of cross-linked platinum nanowires by surfactant templating and their elecrochemical characterization

Platinum/carbon (Pt/C) composite materials were prepared by the hydrazine reduction of H2PtCl6 confined to a mixed surfactant lytropic liquid crystal (LC)/C mixture with varying amounts of water. The reaction at relatively low water contents successfully yielded cross-linked Pt nanowires with wire-widths of 2-5 nm. The novel Pt nanostructure is believed to be from poorly hydrated hexagonal domains formed together with layered domains by the phase separation of the precursory LC mixture in the presence of carbon. Electrochemical measurements using cyclic volutammetry and membrane electrode assemblies revealed that the cross-linked nanowired Pt/C composite exhibits fairly high electrocatalytic activity for oxygen reduction reaction, as well as a high performance as the cathode material for polymer electrolyte fuel cells.     

Selection of soldering temperature for ultrasonic-assisted soldering of 5056 aluminum alloy using Zn-Al system solders

The conditions for sound butt-joints of 5056 aluminum alloy containing 4.6 mass% Mg using Zn-xAl (x = 5, 13, and 38 mass%) solder at the relevant temperatures were investigated. Each solder foil was inserted between faying surfaces of 5056 aluminum rods. Ultrasonic vibration at a frequency of 19 kHz was applied to the faying surfaces through an aluminum substrate at soldering temperatures for 4 s in air. The strength of obtained solder joints was measured by tensile tests. The microstructure in the solder layer after the soldering process was evaluated with an SEM-EDX. The results of tensile tests revealed that joints soldered under the liquidus temperature of Zn-Al solders showed higher strength than joints soldered over the liquidus temperature. In the joints soldered over the solder liquidus temperature, the joint strength decreased with an increase in soldering temperature. It was caused by the formation of MgZn₂ in the solder layer due to dissolution of 5056-Al into the solder liquid during the soldering process. On the other hand, ultrasonic-assisted soldering under the solder liquidus temperature suppressed dissolution of 5056-Al and improved the joint strength by reducing the formation of MgZn₂.     

Electrical Properties of Pre-Alloyed Cu-P Containing Electrically Conductive Adhesive

In this study, a pre-alloyed Cu-P powder with a trace amount of P (0.002 at.%) was used as a metallic filler in a phenolic resin-based electrically conductive adhesive (ECA). The electrical property of the Cu-P-filled ECA was investigated for long-term stability and reliability by aging at high temperature exposure at 125°C and 85°C/85% RH for 1000 h, respectively. Results showed that the electrical resistivity of the Cu-P-filled ECA could be maintained consistently low after high temperature exposure at 125°C for 1000 h or aging at 85°C/85% RH for 1000 h, compared with the rapidly increased resistivity of Cu-filled ECA over time. A significantly low final resistivity at an order of magnitude of 10^?4 Ω·cm could be maintained in Cu-P-filled ECA even after aging at 85°C/85% RH for 1000 h.