刮板输送机中板仿生耐磨优化试验研究

刮板输送机中板磨损失效已成为输送机运行故障的主要原因之一，为了提高中板耐磨性，基于蜣螂非光滑单元进行了仿生中板设计，以磨损量为响应值，进行了单因素和响应面法优化试验。根据响应面法试验结果得到的因素显著性影响顺序（从高至低）依次为：径向距离，深径比，直径，节距角。基于试验结果建立了磨损量与因素的回归预测模型，经试验对比发现，预测模型与真实试验的相对误差为3.2%。在特定工况（煤散料粒度为6~8 mm、载荷为20 N、刮板链速为0.65 m/s及试验时长为6 600 s）下，当深径比为1.41、直径为0.69 mm、节距角为6.55°和径向距离为4.66 mm时，磨损量最小，仿生中板的耐磨性提高了12.6%。分析其耐磨机理发现，与光滑板相比，仿生板的磨粒磨损及黏着磨损较轻。凹坑分布可破坏持续切削中板表面的煤粒运动状态。中板的仿生优化可为今后刮板输送机的设计提供一定参考。     

内燃机活塞环表面处理技术

活塞环在内燃机中有着支撑、密闭、储油、导热的作用,内燃机活塞环制备材料应该具备优良的加工性能、耐高温、耐腐蚀、导热性好且具有良好的强韧性,较好的与气缸材料表面的磨合性能。球墨铸铁和专用钢材已经成为制备内燃机活塞环的基础材料,目前国内外采用多种表面处理技术比如:镀铬、氮化、PVD与CVD镀膜、喷钼、喷涂陶瓷层等表面处理工艺进行表面改性,提高内燃机活塞环的使用寿命和使用性能。需要不断研究和开发新的内燃机活塞环的表面处理技术来满足实际生产和应用中内燃机越来越高的要求。     

锚杆锯切设备自动化改造技术应用

通过对锚杆锯切设备的设计、改进情况进行总结，详细介绍了自动化改造前后的设备工作原理、结构组成以及各部分工作过程动作描述等内容，根据改造前后的各项数据统计分析，列出了自动化改造后产品质量、生产效率和企业的利润的变化，同时还有设备故障率、工人劳动强度、设备操作人员数量的减少以及工厂生产环境由污染型转变成节能环保型企业等相关内容，展示所取得的有益效果。     

Leader-following consensus of fractional-order multi-agent systems via adaptive control

This article focuses on the consensus problem of leader-following fractional-order multi-agent systems (MASs) with general linear and Lipschitz nonlinear dynamics. First, the distributed adaptive protocols for linear and nonlinear fractional-order MASs are constructed, respectively. We allow the control coupling gains to be time varying for each agent. Moreover, the adaptive modification schemes for the control gain are designed, which renders smaller control gains and thus requires smaller amplitude on the control input without sacrificing consensus convergence. Second, based on fractional-order Lyapunov stability theorem and Barbalat's lemma, two novel sufficient conditions in terms of linear matrix inequalities are provided to ensure that the leader-following consensus can be obtained in the case for any undirected connected communication graph. Furthermore, we show that the proposed algorithm also works for consensus of agents with intrinsic Lipschitz nonlinear dynamics. As a result, the proposed framework requires no global information and thus can be implemented in a fully distributed manner. Finally, the numerical simulations are given to demonstrate the effectiveness of obtained the theoretical results.     

基于FCM燃料的商业压水堆中子学分析

全陶瓷微封装(Fully Ceramic Microencapsulated,FCM)燃料是一种将三结构同向性型(Tri-structural isotropic,TRISO)燃料颗粒弥散于SiC基质的先进燃料,具有良好的包容裂变产物的能力,能有效地改善核燃料在严重事故下保持结构完整性的能力,有利于降低核电站发生大量放射性物质泄漏的风险,是耐事故燃料(Accident Tolerant Fuel,ATF)的主要研究方向之一。与传统UO_2陶瓷芯块燃料相比,FCM燃料的U装量较少,且燃料基体采用SiC,慢化能力较好,可能导致FCM燃料应用于商业压水堆时寿期初慢化剂温度系数为正,不能满足堆芯的固有安全性。本文以标准AFA3G 17×17栅格形式的UO_2-Zr合金燃料组件为参照对象,采用中核集团自主研发的NESTOR软件,分析了17×17和13×13两种栅格形式的FCM燃料(UN核芯)组件的中子学特性,评价了由13×13栅格形式的FCM燃料(UN核芯)组成反应堆堆芯的总体物理特性。研究表明:含钆可燃毒物的13×13栅格形式的FCM燃料(UN核芯)组件可满足欠慢化要求,13×13栅格形式的FCM燃料(UN核芯)用于大型商业压水堆堆芯的慢化剂温度系数可以为负,首循环堆芯可达到与参照堆芯接近的燃耗深度与循环长度,能初步满足商业压水堆堆芯的固有安全性和经济性的要求。     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

CO压缩机优化运行总结

为确保原CO压缩机在净化系统升级改造项目实施后能安全稳定运行,采取了流程优化、工艺条件论证、设备缺陷排查、联锁指标重新确定等一系列措施。改造措施实施后,CO压缩机出口压力稳定在3.23 MPa左右,有效缓解了前后工序压力波动对压缩机稳定运行的影响,各级水冷却器的换热效果也得到了较大的改善。