Mechanical,Thermal and Electrical Resisitivity Properties of Thermoplastic Composites Filled with Carbon Fibers and Carbon Particles

Composites consisting of carbon fibers (CF) and carbon particles (CP) in polypropylene (PP) matrix were melt-compounded. Composites were analyzed for their mechanical, electrical and thermal properties. Results indicate that the addition of these fillers improved the mechanical properties of the composites. Thermal conductivity was enhanced as the concentration of fillers was increased. Carbon fibers render the composites electrically conductive so we observed a percolation threshold near 10 wt.% of CF for PP/CF (PP and CF composite) and near 25 wt.% of CP for PP/CP (PP and carbon particle composite). All the results indicated that carbon fibers are more effective in improving the properties as compare to the carbon particles.     

Synthesis of Biodiesel from Canola Oil Using Heterogeneous Base Catalyst

A series of alkali metal (Li, Na, K) promoted alkali earth oxides (CaO, BaO, MgO), as well as K₂CO₃ supported on alumina (Al₂O₃), were prepared and used as catalysts for transesterification of canola oil with methanol. Four catalysts such as K₂CO₃/Al₂O₃ and alkali metal (Li, Na, K) promoted BaO were effective for transesterification with >85 wt% of methyl esters. ICP-MS analysis revealed that leaching of barium in ester phase was too high (~1,000 ppm) when BaO based catalysts were used. As barium is highly toxic, these catalysts were not used further for transesterification of canola oil. Optimization of reaction conditions such as molar ratio of alcohol to oil (6:1–12:1), reaction temperature (40–60 °C) and catalyst loading (1–3 wt%) was performed for most efficient and environmentally friendly K₂CO₃/Al₂O₃ catalyst to maximize ester yield using response surface methodology (RSM). The RSM suggested that a molar ratio of alcohol to oil 11.48:1, a reaction temperature of 60 °C, and catalyst loading 3.16 wt% were optimum for the production of ester from canola oil. The predicted value of ester yield was 96.3 wt% in 2 h, which was in agreement with the experimental results within 1.28%.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

Sodium molybdate—a possible alternate additive for sodium dichromate in the electrolytic production of sodium chlorate

Sodium dichromate is commonly used in sodium chlorate production to maintain high current efficiency; however, it is also a well documented carcinogen. To reduce the environmental impact, identification of a suitable alternative with similar buffering characteristics to dichromate and without adverse effect on the electrolytic performance of sodium chlorate production is important; sodium molybdate is a good candidate. Molybdate ion and its conjugated acid work as a buffer pair at pH 5–6, a lower and slightly narrower pH window than the typical buffer region of dichromate. Nonetheless, the molybdate buffer works effectively during the electrolytic process by maintaining pH at 5.9. Although the use of molybdate buffer will lower the overpotential of hydrogen evolution reaction (HER) by 100 mV, the average off-gas oxygen content is noticeably compromised at 3.6–4.6%, measured using a pilot cell operated at 3 kA m⁻²and 80 °C during a 3-day trial. The resulting current efficiency of 91 92% is significantly lower than when dichromate is employed as the process additive (> 96%). Mixtures of different dichromate and molybdate ratio were also investigated in terms of the resulting cathode surface potential.     

Developmental variations in plasma leptin,leptin soluble receptor and their molar ratio in healthy infants

Background  

Leptin and its soluble receptor (sOB-R) are important to regulation of body composition but there are no data on the developmental variations in these plasma variables and their relationship with body composition measurements,     

Synthesis of polystyrene/poly(butyl acrylate) core–shell latex and its surface morphology

A polystyrene (PS)/poly(butyl acrylate) (PBA) composite emulsion was produced by seeded emulsion polymerization of butyl acrylate (BA) with PS seed particles which were prepared by emulsifier‐free polymerization of styrene with potassium persulfate (KPS) under a nitrogen atmosphere at 70°C for 24 h with stirring at 60 rpm and swelled with the BA monomer in an ethanol/water medium. The structure of the PS/PBA composite particles was confirmed by the presence of the characteristic absorption band attributed to PS and PBA from FTIR spectra. The particles for pure PS and PS/PBA with a low content of the BA monomer were almost spherical and regular. As the BA monomer content was increased, the particle size of the PS/PBA composite particles became larger, and more golf ball‐like particles were produced. The surface morphology of the PS/PBA composite particles was investigated by AFM and SEM. The T_g's attributed to PS and PBA in the PS/PBA composite particles were found at 110 and ?49°C, respectively. The thermal degradation of the pure PS and PS/PBA composite particles occurred in one and two steps, respectively. With an increasing amount of PBA, the initial thermal decomposition temperature increased. On the contrary the residual weight at 450°C decreased with an increasing amount of PBA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 595–601, 2003     

Molecular aspects of the transport and toxicity of ochratoxin a

Ochratoxins are a class of naturally occurring compounds produced by several fungi. The most toxic is ochratoxin A (OTA), and occurrence of some human nephropathies and tumors correlate with enhanced OTA exposure. In this Account, the following areas are examined: molecular details of the binding of OTA to human serum albumin (HSA), the influences of binding to HSA on the trans-port of OTA across epithelial cell membranes by organic anion transport proteins, the oxidative activation of OTA, and the formation of OTA adducts with biological molecules. These studies are beginning to provide a detailed chemical model for the trans-port, accumulation, and genotoxic and carcinogenic effects of OTA.     

Preparation and characterization by radiation of hydrogels of PVA and PVP containing Aloe vera

In these studies, hydrogels for wound dressing were made from a mixture of Aloe vera, poly(vinyl alcohol) (PVA) and poly(N‐vinylpyrrolidone) (PVP) by freeze‐thaw, gamma‐ray irradiation, or a two‐step process of freeze‐thaw and gamma‐ray irradiation. Physical properties, such as gelation, water absorptivity, gel strength and degree of water evaporation were examined to evaluate the applicability of these hydrogels to wound dressing. The PVA:PVP ratio was 6:4, and the dry weight of Aloe vera was in the range of 0.4‐1.2 wt %. The solid concentration of PVA/PVP/Aloe vera solution was 15 wt %. Mixtures of PVA/PVP/Aloe vera were exposed to gamma irradiation doses of 25, 35 and 50 kGy to evaluate the effect of irradiation dose on the physical properties of the hydrogels. Gel content and gel strength increased as the concentration of Aloe vera in PVA/PVP/Aloe vera decreased and as irradiation dose increased and freeze‐thaw was repeated. Swelling degree was inversely proportional to gel content and gel strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1612–1618, 2004     

Numerical simulation on the microstress and microstrain of low Si-Mn-Nb dual-phase steel

According to the stress-strain curves of single-phase martensite and single-phase ferrite steels,whose compositions are similar to those of martensite and ferrite in low Si-Mn-Nb dual-phase steel,the stress-strain curve of the low Si-Mn-Nb dual-phase steel was simulated using the finite element method(FEM).The simulated result was compared with the measured one and they fit closely with each other, which proves that the FE model is correct.Based on the FE model,the microstress and microstrain of the dual...     

Sensorless control for hysteresis compensation of AFM scanner by modified Rayleigh model

A novel modified Rayleigh model was developed for compensating hysteresis problem of an atomic force microscope (AFM) scanner. In high driving fields, piezoelectric actuators that integrated a scanner have severe hysteresis, which can cause serious displacement errors. Piezoelectric hysteresis is from various origins including movement of defects, grain boundary effects, and displacement of interfaces. Furthermore, because its characteristic is stochastic, it is almost impossible to predict the piezoelectric hysteresis analytically. Therefore, it was predicted phenomenologically, which means that the relationship between inputs and outputs is formulated. The typical phenomenological approach is the Rayleigh model. However, the model has the discrepancy with experiment result as the fields increase. To overcome the demerit of the Rayleigh model, a modified Rayleigh model was proposed. In the modified Rayleigh model, each coefficient should be defined differently according to the field direction due to the increase of the asymmetry in the high fields. By applying an inverse form of this modified Rayleigh model to an AFM scanner, it is proved that hysteresis can be compensated to a position error of less than 5%. This model has the merits of reducing complicated fitting procedures and saving computation time compared with the Preisach model.