Economic minerals of the Kovdor baddeleyite-apatite-magnetite deposit,Russia: mineralogy,spatial distribution and ore processing optimization

The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite–carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe.The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti–Mn–Si–rich magnetite with ilmenite exsolution lamellae, fine grains of Fe–Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg–Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti–V–Ca-rich magnetite with exsolution inclusions of geikielite–ilmenite, fine grains of Ba–Sr–Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.     

Petrogenetic relations among titanium‐rich minerals in an anatectic high‐P mafic granulite

The petrogenetic relations among Ti‐rich minerals in high‐grade metabasites is illuminated here through a detailed petrological investigation of an anatectic garnet–clinopyroxene granulite from the Grenville Province, Ontario, Canada containing rutile, titanite and ilmenite in distinct microtextural settings. Garnet porphyroblasts exhibit zoned Ti concentrations (up to 0.15 wt% TiO₂ in their cores), as well as a variety of rutile inclusion types, including clusters of small, variably elongate grains and thin (≤1 μm) oriented needles. Calcite inclusions in garnet, commonly observed surrounding garnet cores containing quartz and clinozoisite, indicate the presence of evolving C–O–H fluids during garnet growth and suggest that the rutile clusters may have formed from subsequent Ti diffusion and rutile precipitation within existing fluid inclusions. Titanite forms large subhedral crystals and typically occurs where the primary garnet–clinopyroxene assemblage is in contact with leucosome containing megacrystic hornblende, silvialitic scapolite and calcic plagioclase. Many titanite crystals exhibit marginal subgrains that correspond with sharp changes in their major and trace element composition, likely related to a dissolution–precipitation or recrystallization process following primary crystallization. Clinopyroxene–ilmenite symplectite coronas surround titanite in most locations, likely forming from reaction with the hornblende‐plagioclase matrix (±fluids/melt). Integration of multi‐equilibria thermobarometry and Zr thermometry in rutile and titanite with phase equilibrium modelling allows definition of a clockwise P–T path evolving to peak pressures of ~1.5 GPa at ~750°C during garnet and rutile growth, followed by peak temperature conditions of ~1.2 GPa and ~820–880°C associated with melt‐present titanite growth, and finally cooling and decompression to regional amphibolite facies conditions (~1.0 GPa and ~750°C) associated with the formation of clinopyroxene–ilmenite symplectites surrounding titanite. P–T pseudosections calculated for the pristine (leucosome‐ and titanite ‐free) metabasite bulk composition reproduce much of the prograde phase relations, but predict rutile as the stable Ti‐rich mineral at the peak thermal conditions associated with melt‐present titanite growth. The P–M(CaO) and T–M(CaO) models show that bulk CaO concentrations have a significant effect on the stability ranges of titanite and rutile. Increased bulk CaO tends to stabilize titanite to higher pressure and temperature at the expense of rutile, with a ≥15% increase in CaO producing the observed titanite‐bearing assemblage at high‐P granulite facies conditions. Thus, the model results are consistent with the textural observations, which suggest that titanite stability is associated with a chemical exchange between the host metabasite and a Ca‐rich melt.     

An AEM study of garnet clinopyroxenite from the Sulu ultrahigh-pressure terrane: formation mechanisms of oriented ilmenite,spinel, magnetite,amphibole and garnet inclusions in clinopyroxene

Optical microscopy, secondary electron microscopy and analytical electron microscopy were used to characterize crystallographic orientation relationships between oriented mineral inclusions and clinopyroxene (Cpx) host from the Hujialing garnet clinopyroxenite within the Sulu ultrahigh-pressure (UHP) terrane, eastern China. One garnet clinopyroxenite sample (2HJ-2C) and one megacrystic garnet-bearing garnet clinopyroxenite (RZ-11D) were studied. Porphyroblastic clinopyroxene from sample 2HJ-2C contains oriented inclusions of ilmenite (Ilm), spinel (Spl), magnetite and garnet, whereas clinopyroxene inclusions within megacrystic garnet from sample RZ-11D contain oriented inclusions of ilmenite and amphibole. Specific crystallographic relationships were observed between ilmenite/spinel plates and host clinopyroxene in sample 2HJ-2C and between ilmenite plates and host clinopyroxene in sample RZ-11D, i.e. [1[`1]00 1\bar{1}00 ]<sub>Ilm</sub>//[0[`1]0 0\bar{1}0 ]_Cpx (0001)_Ilm//(100)_Cpx; and [110]_Spl//[0[`1]0 0\bar{1}0 ]<sub>Cpx</sub> ([`1]11 \bar{1}11 )_Spl//(100)_Cpx. These inclusions are suggested to be primary precipitates via solid-state exsolutions. Most of the needle-like magnetite/spinel inclusions generally occur at the rims or along fractures of clinopyroxene within sample 2HJ-2C. Despite the epitaxial relation with host clinopyroxene, these magnetite/spinel needles would have resulted from fluid/melt infiltrations. Non-epitaxial garnet lamellae in clinopyroxene of sample 2HJ-2C were formed via fluid infiltration-deposition primarily along (010) and subordinately along (100) partings. Epitaxial amphibole plates (with a thickness <1 μm) and lamellae (with a thickness = 1–10 μm) in host clinopyroxene of sample RZ-11D were probably results of hydration processes, although amphibole plates could otherwise be interpreted as exsolution products. Temporal relations between mineral inclusions in each sample can be established, and a semi-quantitative P–T path for this garnet clinopyroxenite body was derived accordingly. The present results show that the Hujialing garnet clinopyroxenite may not have subducted to mantle depths as deep as 250 km during UHP metamorphism as suggested by previous studies. This study demonstrates that the crystallographic and temporal/spatial relationships between aligned inclusions and host minerals are essential to a correct genetic interpretation of metamorphic rocks.     

Tectono‐metamorphic history recorded in garnet porphyroblasts: insights from thermodynamic modelling and electron backscatter diffraction analysis of inclusion trails

In a Barrovian metamorphic sequence, garnetiferous mica schists document a heterogeneously developed superposition of sub‐orthogonal fabrics and multiple garnet growth episodes. In the variably deformed domains, four types of garnet porphyroblasts have been defined based on inclusion trail patterns. Modelled garnet zoning in the MnNCKFMASHTO system indicates a prograde evolution from 4–4.5 kbar and 490–510 °C to 5–6 kbar and 520–550 °C in the earliest subhorizontal fabric progressing towards 6.5–7.5 kbar and 560–590 °C in the subsequent subvertical foliation. This fabric is heterogeneously deformed into a shallow‐dipping retrograde foliation associated with garnet resorption. In situ electron backscatter diffraction measurements of ilmenite inclusions in individual garnet grains yield precise data on included planar and linear elements. Consistent orientations of internal foliations, lineations and foliation intersection axis sets indicate a superposition of three sub‐orthogonal foliation systems. Weak variations of internal records with increasing intensity of deformation suggest that a moderate buckling stage occurred, but apparent lack of porphyroblast rotation is interpreted as a result of dominant passive flow. Coupling the orientation of internal fabric sets with P–T estimates is used to complement the tectono‐metamorphic evolution of the thickened crust. We demonstrate that garnet porphyroblasts preserve features which reflect large‐scale tectonic processes in orogens.     

The Discovery of Phlogopite Exsolution Lamellae in Garnets of Eclogite Inclusions, Liaoning Province

In No. 50 kimberlite pipe of Fuxian County, Liaoning Province, an eclogite inclusion(nodule), which is extremely rare in kimberlites, was discovered and phlogopite exsolutionlamellae were found in garnets of the inclusion. Microscopic, TEM and energy spectral observa-tions and studies confirmed that these lamellae are phlogopite. They are colourless and acicularin section, generally 0.5-5μm in width and 10-100μm in length. Nevertheless, fine lamellae,0.05-0.1μm wide and 1-2μm long, are also well developed. Along [111] of the garnet, three setsof phlogopite lamellae show oriented arrangement approximately at angles of 60°-70°, indi-cating that these lamellae might be the product of exsolution from garnet as a result ofpressure-release when eclogite ascended from the relatively deep level to the relatively shallowlevel of the mantle. Tiny acicular exsolution minerals (or inclusions) are commonly found ingarnet and pyroxene in eclogite inclusions of kimberlites all over the world and it has been re-ported that the identified exsolution minerals include pyroxene and rutile. This is the first timethat phlogopite exsolution lamillae were found in eclogite inclusions in the world.     

Retrogressive Microstructures of the Eclogites from the Northern Dabie Mountains, Central China： Evidence for Rapid Exhumation

The ultrahigh-pressure eclogites from the northern Dabie Mountains in central China occurred as tectonic lens or blocks within granitic gneisses or meta-peridotites. Petrologic studies suggest that the studied eclogites experienced strongly retrogressive metamorphism and produced a series of characteristic retrogressive microstructures. The retrograde structures mainly include: (1) oriented needle mineral exsolution, e. g. , quartz needles in Na-clinopyroxene and rotile, clinopyroxene and apatite exsolution in garnet formed under decreasing pressure conditions during exhumation; (2) symplectite, especially, two generations of symplectites developed outside the garnet grains, which are called ““double symplectite““ here; (3) compositional zoning of minerals such as garnet and clinopyroxene; (4) minerals with a reaction rim or retrograde rim, e.g. , omphacite with a diopside rim, diopside with an amphibole rim and rutile with a rim of ilmenite. These retrograde textures, especially mineral zoning and symplectite, provide important petrologic evidence for the exhumation process and uplift of high-grade metamorphic rocks such as eclogite in the northern Dabie Mountains, indicating a rapid exhumation process.     

Mechanisms of retrograde changes in oxide minerals from the Proterozoic Serrote da Laje deposit,northeastern Brazil

Retrograde textural and chemical changes in oxide minerals from the Proterozoic Serrote da Laje deposit, northeastern Brazil, have been investigated. The deposit is situated in a mafic-ultramafic layered sill. Oxidation and cooling leading to successively decreasing diffusion rates resulted in disequilibrium on the microscale. Pleonaste in particular shows a rapid change in composition between (a) coarse grains in a granoblastic magnetite host, indicating metamorphic peak conditions, (b) coarse lamellae in magnetite, indicating commencement of exsolution, and (c) composite pleonaste — ilmenite lamellae in magnetite, which indicate oxidation exsolution. Barren rock layers cooled under more oxidized conditions compared with oxide-rich layers. Formation of pleonaste- and ilmenite lamellae in magnetite and ilmenite — hematite relations are discussed.     

Ultrahigh-pressure garnet peridotites from the devolatilization of sea-floor hydrated ultramafic rocks

Garnet peridotites occur in quartzofeldspathic gneisses in the Northern Qaidam Mountains, western China. They are rich in Mg and Cr, with mineral compositions similar to those in mantle peridotites found in other orogenic belts and as xenoliths in kimberlite. Garnet‐bearing lherzolites interlayered with dunite display oriented ilmenite and chromite lamellae in olivine and pyroxene lamellae in garnet that have been interpreted to indicate pressures in excess of 6 GPa. However, some garnet porphyroblasts include hornblende, chlorite and spinel + orthopyroxene symplectite after garnet; some clinopyroxene porphyroblasts include abundant actinolite/edenite, calcite and lizardite in the lherzolite; some olivine porphyroblasts (Fo₉₂) include an earlier generation Mg‐rich olivine (Fo_95–99), F‐rich clinohumite, pyroxene, chromite, anthophyllite/cummingtonite, Cl‐rich lizardite, carbonates and a new type of brittle mica, here termed ‘Ca‐phlogopite’, in the associated dunite. The pyrope content of garnet increases from core to rim, reaching the pyrope content (72 mol.%) of garnet typically found in the xenoliths in kimberlite. The simplest interpretation of these observations is that the rock association was formerly mantle peridotite emplaced into the oceanic crust that was subjected to serpentinization by seawater‐derived fluids near the sea floor. Dehydration during subduction to 3.0–3.5 GPa and 700 °C transformed these serpentinites into garnet lherzolite and dunite, depending on their Al and Ca contents. Pseudosection modelling using thermocalc shows that dehydration of the serpentinites is progressive, and involved three stages for Al‐rich and two stages for Al‐poor serpentinites, corresponding to the breakdown of the key hydrous minerals. Static burial and exhumation make olivine a pressure vessel for the pre‐subduction mineral inclusions during ultrahigh‐pressure (UHP) metamorphism. The time span of the UHP event is constrained by the clear interface between the two generations of olivine to be very short, implying rapid subduction and exhumation.     

Rutile inclusions in garnet from a dissolution‐reprecipitation mechanism

Metamorphic garnet commonly contains needle‐like rutile inclusions as well as equant rutile inclusions that surround quartz inclusions and range in size from submicrometer to nanometer. Although the origin of these equant rutile inclusions, that is, exsolution or non‐exsolution, has important implications for petrological and tectonic processes, the crystallographic characteristics of these inclusions have rarely been studied because of the small sizes and analytical difficulties involved. Here, we report the crystallographic characteristics pertinent to the genetic origin of minute equant rutile inclusions in cloudy, nearly spherically shaped garnet domains with Ti‐depleted compositions surrounding quartz inclusions in ultrahigh‐pressure garnet from several diamondiferous Erzgebirge quartzofeldspathic gneissic rock samples. TEM analyses show that the equant rutile crystals in cloudy garnet domains are partially bounded by the low‐energy {100}_rt ± {110}_rt ± {101}_rt facets and have rather random crystallographic orientation relationships (CORs) with the garnet host, with preferential alignment of low‐energy lattice planes, for example, {100}_rt//{112}_grt, for some rutile crystals. Although the rather random CORs are unlikely to be attributed to solid‐state exsolution subjected to the stringent topotactic garnet lattice constraints, the characteristic subhedral {100}_rt ± {110}_rt ± {101}_rt crystal forms of rutile can be rationalized by a metasomatic dissolution‐reprecipitation mechanism via a fluid phase. In this scenario, the quartz+fluid inclusions in garnet were first subjected to decompression microcracking during rock exhumation, followed by dissolution of Ti‐bearing garnet matrix at the crack tips or along the crack surfaces and subsequent reprecipitation of rutile, apatite, gahnite, akdalaite, and Ti‐depleted garnet. The rapid coalescence between rutile and garnet crystals in fluid or direct attachment of rutile crystals onto the dissolving crack surfaces would then yield the rather random CORs as reported here. These results, along with previous work on rutile needles, indicate rather diverse genesis of rutile inclusions in various crystal forms, thus shedding light on the controversial exsolution origin for other inclusion suite/microstructure in minerals.     

Garnet porphyroblast timing and behaviour during fold evolution: implications from a 3-D geometric analysis of a hand-sample scale fold in a schist

Detailed 3‐D analysis of inclusion trails in garnet porphyroblasts and matrix foliations preserved around a hand‐sample scale, tight, upright fold has revealed a complex deformation history. The fold, dominated by interlayered quartz–mica schist and quartz‐rich veins, preserves a crenulation cleavage that has a synthetic bulk shear sense to that of the macroscopic fold and transects the axis in mica‐rich layers. Garnet porphyroblasts with asymmetric inclusion trails occur on both limbs of the fold and display two stages of growth shown by textural discontinuities. Garnet porphyroblast cores and rims pre‐date the macroscopic fold and preserve successive foliation inflection/intersection axes (FIAs), which have the same trend but opposing plunges on each limb of the fold, and trend NNE–SSW and NE–SW, respectively. The FIAs are oblique to the main fold, which plunges gently to the WSW. Inclusion trail surfaces in the cores of idioblastic porphyroblasts within mica‐rich layers define an apparent fold with an axis oblique to the macroscopic fold axis by 32°, whereas equivalent surfaces in tabular garnet adjacent to quartz‐rich layers define a tighter apparent fold with an axis oblique to the main fold axis by 17°. This potentially could be explained by garnet porphyroblasts that grew over a pre‐existing gentle fold and did not rotate during fold formation, but is more easily explained by rotation of the porphyroblasts during folding. Tabular porphyroblasts adjacent to quartz‐rich layers rotated more relative to the fold axis than those within mica‐rich layers due to less effective deformation partitioning around the porphyroblasts and through quartz‐rich layers. This work highlights the importance of 3‐D geometry and relative timing relationships in studies of inclusion trails in porphyroblasts and microstructures in the matrix.     

Microstructural features of albite porphyroblasts as indicators of sequential Barrovian metamorphic mineral growth in the Caledonides of the SW Scottish Highlands

Inclusion – porphyroblast and porphyroblast – porphyroblast relationships show that abundant albite in mica schists in the Caledonides of the SW Scottish Highlands are part of the Barrovian metamorphic assemblage. Growth early in the D2 deformational phase of porphyroblast cores followed the growth of Mn‐rich garnet but preceded the growth of porphyroblasts of the index mineral almandine. Two sets of inclusion trails in the albite correspond to the regionally expressed S1 and S2. Straight trails of muscovite, chlorite, quartz, epidote and the earliest growth of biotite make up S1. Crenulated trails express deformation of S1 early in D2 with muscovite, chlorite, biotite, quartz, epidote and the Mn‐rich garnet associated with the development of S2 crenulation cleavage. The geometries of these trails uniquely record early stages of D2 deformational history. An _0?3 growth is related to the temporal coincidence of the formation of S1–S2 crenulation cleavage hinges as favourable sites for nucleation and the release of large amounts of water from prograde reactions during tectonothermal reconstitution of first cycle immature sediments with a volcanic component. The main characteristics of the regionally expressed D2 schistosity were developed during the major grain coarsening that followed both albite and almandine porphyroblast growth. Essentially inclusion‐free An _4?19 rims grew on the inclusion‐containing cores in the almandine zone in the later stages of schistosity growth and unoriented porphyroblasts of muscovite, biotite and chlorite indicate that mineral growth extended from the later stages of D2 to post‐D2. Previous interpretations of the albite porphyroblast growth having been during D4 to post‐D4 contemporaneous with retrogression are inconsistent with the microstructural evidence.     

Olivine‐bearing symplectites in fractured garnet from eclogite,Moldanubian Zone (Bohemian Massif) – a short‐lived,granulite facies event

Recent petrological studies on high‐pressure (HP)–ultrahigh‐pressure (UHP) metamorphic rocks in the Moldanubian Zone, mainly utilizing compositional zoning and solid phase inclusions in garnet from a variety of lithologies, have established a prograde history involving subduction and subsequent granulite facies metamorphism during the Variscan Orogeny. Two temporally separate metamorphic events are developed rather than a single P–T loop for the HP–UHP metamorphism and amphibolite–granulite facies overprint in the Moldanubian Zone. Here further evidence is presented that the granulite facies metamorphism occurred after the HP–UHP rocks had been exhumed to different levels of the middle or upper crust. A medium‐temperature eclogite that is part of a series of tectonic blocks and lenses within migmatites contains a well‐preserved eclogite facies assemblage with omphacite and prograde zoned garnet. Omphacite is partly replaced by a symplectite of diopside + plagioclase + amphibole. Garnet and omphacite equilibria and pseudosection calculations indicate that the HP metamorphism occurred at relatively low temperature conditions of ~600 °C at 2.0–2.2 GPa. The striking feature of the rocks is the presence of garnet porphyroblasts with veins filled by a granulite facies assemblage of olivine, spinel and Ca‐rich plagioclase. These minerals occur as a symplectite forming symmetric zones, a central zone rich in olivine that is separated from the host garnet by two marginal zones consisting of plagioclase with small amounts of spinel. Mineral textures in the veins show that they were first filled mostly by calcic amphibole, which was later transformed into granulite facies assemblages. The olivine‐spinel equilibria and pseudosection calculations indicate temperatures of ~850–900 °C at pressure below 0.7 GPa. The preservation of eclogite facies assemblages implies that the granulite facies overprint was a short‐lived process. The new results point to a geodynamic model where HP–UHP rocks are exhumed to amphibolite facies conditions with subsequent granulite facies heating by mantle‐derived magma in the middle and upper crust.     

羌塘地区榴辉岩中矿物出溶体及其成因机制探讨

西藏羌塘地区榴辉岩石榴子石和磷灰石中均发育矿物出溶体,结合电子探针和扫描电镜分析及能谱分析,确定了石榴子石中的出溶体有金红石、石英和角闪石,指示其可能经历了高压/超高压变质作用。本研究在磷灰石中发现了金红石出溶,并认为其可能是在高压/超高压条件下元素相互置换的结果,置换方式为Ti~(4+)(Fe~(2+)、Si~(4+))=2Ca~(2+),这些出溶体的形成为榴辉岩曾经历高压/超高压变质作用提供了矿物学证据。     

Heavy Mineral Placer Sand Deposits of Kontiagarh Area,Ganjam District,Orissa, India

The Kontiagarh placer deposit in the Ganjam district, Orissa, India extends in northeast direction having a width of 700–1000 m. A total of 187 samples were collected meterwise from 55 bore holes in a grid pattern from beach, frontal, intermediate and back dunes covering an area of approximately 1 km². Light minerals decrease in size from the beach to the back dunes, whereas the size distribution of heavy minerals in the beach and dunes is more or less uniform. The average heavy mineral content in the beach and dunes vary from 9.38% to 24.20%. The heavy minerals are ilmenite, garnet, sillimanite, rutile, monazite, and zircon with trace amounts of magnetite, hornblende, diopside, sphene, tourmaline, and epidote. Heavy minerals are mostly less than 350 µm in size, with a peak distribution in the range between 180 and 125 µm. Ilmenite shows exsolution intergrowth with hematite. Mineral chemistry of ilmenite, hematite, leucoxene, magnetite, monazite and sillimanite are examined by EPMA. Leucoxene is lower in Fe and higher in Ti, Al, Cr and V than ilmenite. The litho‐units of the Precambrian Eastern Ghats Mobile Belt, comprising primarily khondalite, charnockite, calc‐silicate granulite and gneiss, are the source of heavy minerals for this deposit. The bulk sample has 7.30% ilmenite, 5.24% sillimanite, 9.16% garnet, 0.18% rutile, 0.14% monazite, 0.06% zircon and 0.52% other heavy minerals. The deposit has good potential for economic exploitation of ilmenite, rutile, sillimanite, monazite, zircon and garnet.     

Shear zone vs folding origin for spiral inclusion trails in the Canton Schist

The three-dimensional geometry of spiral inclusion trails from the Canton Schist were measured to determine whether the spirals were a product of porphyroblast rotation within a shear zone, or porphyroblast growth during a series of overprinting fold events. The spiral inclusion trails are composed of three separate, sub-planar inclusion trail surfaces occupying texturally distinct parts of the porphyroblasts. These surfaces are correlated across a >10 km² area using textural criteria and relative timing. Measured patterns of inclusion trail orientation and asymmetry suggest they did not form by porphyroblast rotation within a non-coaxial shear zone. Rather, the porphyroblasts grew during three successive overprinting fold events (F₂–F₄), and the spiral inclusion trails represent the accumulated curvature associated with folding of successive axial plane foliations. The data show that spiral garnets are not peculiar to shear zones, and can form by overprinting crenulations and folds. This is consistent with the common occurrence of spiral garnets in multiply-deformed, regionally metamorphosed fold belts.     

High-pressure granulites in the Sanggan area, North China craton: metamorphic evolution, P–T paths and geotectonic significance

High‐pressure basic granulites are widely distributed as enclaves and sheet‐like blocks in the Huaian TTG gneiss terrane in the Sanggan area of the Central Zone of the North China craton. Four stages of the metamorphic history have been recognised in mineral assemblages based on inclusion, exsolution and reaction textures integrated with garnet zonation patterns as revealed by compositional maps and compositional profiles. The P–T conditions for each metamorphic stage were obtained using thermodynamically and experimentally calibrated geothermobarometers. The low‐Ca core of growth‐zoned garnet, along with inclusion minerals, defines a prograde assemblage (M1) of garnet + clinopyroxene + plagioclase + quartz, yielding 700 °C and 10 kbar. The peak of metamorphism at about 750–870 °C and 11–14.5 kbar (M2) is defined by high‐Ca domains in garnet interiors and inclusion minerals of clinopyroxene, plagioclase and quartz. Kelyphites or coronas of orthopyroxene + plagioclase ± magnetite around garnet porphyroblasts indicate garnet breakdown reactions (M3) at conditions around 770–830 °C and 8.5–10.5 kbar. Garnet exsolution lamellae in clinopyroxene and kelyphites of amphibole + plagioclase around garnet formed during the cooling process at about 500–650 °C and 5.5–8 kbar (M4). These results help define a sequential P–T path containing prograde, near‐isothermal decompression (ITD) and near‐isobaric cooling (IBC) stages. The clockwise hybrid ITD and IBC P–T paths of the HP granulites in the Sanggan area imply a model of thickening followed by extension in a collisional environment. Furthermore, the relatively high‐pressures (6–14.5 kbar) of the four metamorphic stages and the geometry of the P–T paths suggest that the HP granulites, together with their host Huaian TTG gneisses, represent the lower plate in a crust thickened during collision. The corresponding upper‐plate might be the tectonically overlying Khondalite series, which was subjected to medium‐ to low‐pressure (MP/LP: 7–4 kbar) granulite facies metamorphism with a clockwise P–T path including an ITD segment. Both the HP and the MP/LP granulite facies events occurred contemporaneously at c. 1.90–1.85 Ga in a collisional environment created by the assembly process of the North China craton.     

The origin of rutile-ilmenite aggregates (“nigrine”) in alluvial-fluvial placers of the Hagendorf pegmatite province, NE Bavaria, Germany

Summary Titanium placer deposits occur in alluvial-fluvial drainage systems which dissect Moldanubian gneisses intruded by Late Variscan pegmatites (Hagendorf province) in southern Germany. Based upon their texture (zonation, exsolution lamellae, intergrowth), microchemical data (Nb, Cr, Ta, V, Fe, W, Sn) and mineral inclusions, two major grain types of intergrown rutile and ilmenite have been established. Grains of type A are always zoned and consist of rutile cores enveloped by ilmenite containing small inclusions of wolframite. A core-rim transition zone is characterized by complex relations of rutile and ilmenite, with rutile lamellae being rich in Nb, V and Fe. Types B1 and B2 aggregates consist of ilmenite with lamellae of niobian rutile and/or ilmenorutile, and additionally have inclusions of ferrocolumbite, pyrochlore, betafite, sphalerite, pyrrhotite and Fe oxides. Such grain types featuring an intimate intergrowth of rutile and ilmenite were called nigrine. Type-C grains are quite similar in their morphological appearance but consist of W-enriched rutile devoid of mineral inclusions and reaction products. Pseudorutile and leucoxene replacing minerals of the nigrine aggregates are presumably caused by supergene alteration under fluctuating redox conditions. Phosphate and aluminum remobilized by supergene processes led to the formation of hydrous Ti-rich phases containing Al, P and Fe. High Nb and W concentrations in nigrine aggregates and in rutile type C may be taken as a marker for highly differentiated granites or pegmatites. This has implications for both, heavy-mineral-based provenance analysis and stream sediment exploration.     

Textural re-equilibration,hydrothermal alteration and element redistribution in Fe-Ti oxide pods,Singhbhum Shear Zone,eastern India

This study describes textures and mineral chemistry of magnetite-ilmenite-bearing pods/pockets in mineralogically diverse feldspathic schist near Pathargora in the Singhbhum Shear Zone, eastern India. The textural and geochemical characteristics of the magnetite-ilmenite assemblage are the results of a protracted geological history involving magmatic crystallization and oxidation-exsolution of titanomagnetite, deformation-induced recrystallization and textural re-equilibration and hydrothermal fluid-induced hematitization of magmatic magnetite. The magnetite grains contain characteristic trellis and sandwich ilmenite lamella, which are interpreted to be the products of oxidation-exsolution of ulvöspinel component of magnetite-ulvöspinel solid solution. The exsolution process was accompanied by preferential partitioning of spinel elements such as Cr, Al and V in magnetite and Ti, Mn, Mg, HFS elements (Nb, Ta), transition elements (Sc, Co, Cu and Zn) and granitophile elements (Mo, Sn and W) in ilmenite. The deformed sandwich lamella is locally recrystallized and transformed into granular ilmenite close to fractures, micro-shear planes and magnetite grain boundaries. Coarse granules of ilmenite, within or associated with magnetite, are of two textural types: one invariably contains Fe-rich exsolved phase and may be of magmatic origin, while the other mostly formed by strain-induced, fluid-mediated expulsion (from the interior of magnetite to its boundary) and dynamic recrystallization of existing ilmenite lamella in magnetite, and dynamic recrystallization of primary ilmenite containing Fe-rich exsolved phases. Magnetite is variably hematitized. The highly porous nature and trace element geochemistry of hematite and mass-balance calculations suggest the hematitization was mostly redox-independent and was caused by infiltration of metal-rich, reduced and acidic fluid. The hematitization process was associated with significant enrichment and immobilization of U, Th, Pb, REEs, Cu, Mo and W and depletion of Ni, Cr, V in hematite.     

Rare and unusual mineral inclusions in diamonds from Mwadui, Tanzania

Syngenetic diamond inclusions from the Mwadui kimberlite reveal that an unusually fertile section of lithospheric mantle beneath the Central African Craton was sampled. This is shown by a very high ratio of lherzolitic to harzburgitic garnet inclusions (1:2) and low Mg/Fe-ratios in olivine and orthopyroxene. Geothermometry applied to the peridotitic inclusions indicates disequilibrium between non-touching inclusion pairs to be common. Disequilibrium between garnet-olivine and garnet-orthopyroxene pairs suggests successive iron enrichment during diamond formation, e.g. leading to the presence of harzburgitic garnet and lherzolitic olivine in the same diamond. Apart from the dominant peridotitic inclusion suite (88%), rare eclogitic inclusions occur (2%) and a number of uncertain paragenesis. Two diamonds, one with eclogitic garnets with moderate pyroxene solid solution and the other with a single ferro-periclase inclusion, suggest the contribution of a small sub-lithospheric component. The finding of the association Fe-FeO-Fe₃O₄ in one single diamond indicates diamond formation over a large range of f _O2 conditions, possibly along redox fronts. Steep compositional gradients may also be reflected by the joint occurrence of harzburgitic garnet and a SiO₂-phase in the same diamond. Alternatively the formation of the SiO₂-phase may be due to extreme carbonation of the peridotitic source. Further unusual findings include the exsolution of a silicate phase from magnetite inclusions, (i.e. primary solution of γ-olivine) and an ilmenite inclusion with an eskolaite (Cr₂O₃) component of 14.5 mol%, the latter together with harzburgitic paragenesis silicate inclusions. Received: 23 August 1997 / Accepted: 7 January 1998     

Growth zoning of garnet porphyroblasts: Grain boundary and microtopographic controls

Chemical zoning in the outer few 10s of microns of garnet porphyroblasts has been investigated to assess the scale of chemical equilibrium with matrix minerals in a pelitic schist. Garnet porphyroblasts from the Late Proterozoic amphibolite facies regional metamorphic mica schists from Glen Roy in the Scottish Highlands contain typical prograde growth zoning patterns. Edge compositions have been measured via a combination of analysis of traverses across the planar edges of porphyroblast surfaces coupled to X-ray mapping of small areas within polished thin sections at the immediate edge of the porphyroblasts. These approaches reveal local variation in garnet composition, especially of grossular (Ca) and almandine (Fe) components, with a range at the edge from <7 mol.% grs to >16 mol.% grs, across distances of less than 50 µm. This small-scale patchy compositional zoning is as much variation as the core–rim compositional zoning across the whole of a 3 mm porphyroblast. Ca and Fe heterogeneity occurs on a scale suggesting a combination of inefficient diffusive exchange across grain boundaries during prograde growth and the evolving microtopography of the porphyroblast surface control garnet composition. The latter creates haloes of compositional zoning adjacent to some inclusions, which typically extend from the inclusion towards the porphyroblast edge during further growth. The lack of a consistent equilibrium composition at the garnet edge is also apparent in the internal zoning of the porphyroblast and so processes occurring during entrapment of some mineral inclusions have a profound influence on the overall chemical zoning. Garnet compositions and associated zoning patterns are widely used by petrologists to reconstruct P–T–t paths for crustal rocks. The evidence of extremely localized (10–50 µm scale) equilibrium during growth further undermines these approaches.