尕龙格玛铜锌多金属矿区火山岩特征

尕龙格玛铜锌多金属矿区岩浆活动强烈,火山岩分布广泛,其展布受区域构造的控制作用明显。通过野外地质调查及对尕龙格玛铜锌多金属矿区火山岩系的岩石矿物组合和结构构造、岩石化学成分、地球化学特征的研究,初步确定了矿区的火山机构及其岩相构造的基本特征。通过对该区英安岩地球化学特征的分析,揭示了矿区在三叠纪时期处于岛弧的大地构造背景;英安岩的形成可能是由于古特提斯洋壳俯冲,引起幔源物质与深海沉积岩共同熔融形成的基性岩浆不断分异演化而形成的。     

新疆东天山地区延西铜矿床的地球化学、成矿年代学及其地质意义

延西铜矿床位于新疆东天山觉罗塔格地区北部的哈尔里克-大南湖岛弧带内,是延东-土屋斑岩型成矿带的西延部分。矿床的赋矿地层主要为石炭系企鹅山群,被含矿斜长花岗斑岩侵入。矿床中的主要岩石类型为安山岩、闪长玢岩以及斜长花岗斑岩,安山岩和闪长玢岩具有同源性及岛弧火山岩的特点,是主要的赋矿围岩;斜长花岗斑岩具有埃达克质岩石的特征,与成矿作用直接相关,其形成晚于安山岩、闪长玢岩。本文测得延西铜矿床辉钼矿Re-Os年龄为326.2±4.5Ma,可以代表其成矿年龄,与土屋-延东铜矿床322.7±2.3Ma的辉钼矿Re-Os年龄基本相同;包括延西铜矿床在内的土屋-延东斑岩型铜矿带成矿时代与成岩时代基本一致或稍晚。延西铜矿床具有斑岩型铜矿床的矿化和围岩蚀变特征,与土屋-延东斑岩型铜矿带内其它矿床均为中石炭世同源岩浆演化的产物,具有相似的成矿作用过程,成矿物质均为岩浆来源,这些矿床可能为同一岩浆活动在不同部位发生矿化的产物。延西铜矿床以及土屋-延东斑岩型铜矿带形成于东天山觉罗塔格地区晚古生代的挤压岛弧背景,应与哈尔里克-大南湖晚古生代岛弧的形成相伴,可能与康古尔塔格大洋板块向北部哈尔里克-大南湖岛弧的俯冲有关。     

新疆东天山哈尔里克奥陶纪的构造属性:来自火山岩LA ICP MS锆石U Pb年代学与地球化学的制约

新疆东天山哈尔里克造山带火山岩为一套酸性—基性岩(流纹岩、英安岩、安山岩、玄武岩)夹火山碎屑岩(凝灰岩)的岩石组合。流纹岩样品的LA ICP MS锆石U Pb定年结果显示,时代为中奥陶世大坪期((4688±91) Ma),代表了该套火山岩的形成年龄。岩石地球化学分析结果显示,该套火山岩SiO2含量介于4912%～7824%,TiO2介于012%～100%,Al2O3介于1131%～2086%;铝饱和指数A/CNK值为080～131(均值为099),里特曼指数σ值为019～386(均值为129),Mg#值为887～4929(均值为3120);富集大离子亲石元素(LILE)Ba、Rb以及轻稀土元素(∑LREE)La、Ce,亏损高场强元素(HFSE)Nb、Ta、Ti等。微量元素和稀土元素的相关图解与比值以及发育的捕获锆石反映了俯冲带岛弧钙碱性火山岩特征,且存在大陆地壳混染作用。综合区域地质资料分析,在早古生代期间(中奥陶世—早志留世),哈尔里克造山带存在大面积的与岛弧演化有关的加里东期岩浆活动,此期间哈尔里克造山带的构造背景为洋壳俯冲有关的岛弧环境,其形成可能与东准噶尔南部克拉麦里洋向南俯冲作用有关。     

白银厂矿田酸性火山岩岩石学及微量元素地球化学特征

酸性火山岩是构成白银厂火山穹隆的主体核心 ,也是黑矿型白银厂式矿床的容矿岩石。本文从酸性火山岩的岩相学特征、主要元素、微量元素、稀土元素地球化学研究入手 ,对酸性火山岩的分类及系列划分、微量元素和稀土元素地球化学及其形成的构造环境进行了深入的探讨。认为该区酸性火山岩主要由流纹岩和英安岩组成 ,属低钾系列和钙碱性系列。地球化学特征表明 ,它的形成是由板块俯冲至深处脱水 ,致使先存下地壳含水辉长质岩石部分熔融而成。其成岩环境为火山弧环境。     

东天山石炭纪企鹅山群火山岩岩石成因

土屋矿区南北大沟企鹅山群火山岩的岩石地球化学研究表明:东天山企鹅山群火山岩主要为拉斑系列,少量为钙碱系列;岩石类型为玄武岩、玄武安山岩、英安岩和流纹岩。稀土、微量元素和Sr、Nd同位素特点揭示:该火山岩系形成于大陆裂谷环境;其源区主要为软流圈地幔,同时有岩石圈地幔源组分卷入,酸性岩浆是玄武质岩浆结晶分异的产物。     

西准噶尔马拉苏早泥盆世火山岩LA-ICP-MS锆石U-Pb年龄、地球化学特征及其大地构造意义

马拉苏地区早泥盆世地层为一套滨海—浅海相火山—沉积岩系,对其中的火山岩夹层进行锆石U-Pb同位素定年和岩石地球化学研究,定年结果显示有大量的新太古代和中新元古代锆石,表明该区存在古老的大陆地壳物质。火山岩样品Si O2含量为52.38%~69.6%,Na2O含量为2.80%~4.85%,K2O为0.16%~0.96%,Ti O2为0.5%~1.96%,Al2O3为14.62%~18.18%,Mg O(1.08%~5.75%)变化范围较大,Mg#值在22.92~38之间,具有高钠、低钾的特征,属于钙碱性、低钾拉斑系列。稀土元素总量∑REE=73×10-6~115×10-6,LREE/HREE值为2.66~3.25,具有明显的Eu负异常(0.83~0.92)。玄武安山岩样品相对富集K、Rb、Ba、Sr等大离子亲石元素,亏损Nb、Ta、Zr、Hf等高场强元素,与典型火山弧玄武岩地球化学特征一致。英安斑岩样品也具有富集大离子亲石元素、亏损Nb、Ta、Ti等高场强元素的特征,反映源区可能有较多壳源物质的加入,其稀土元素配分曲线和微量元素蛛网图与玄武安山岩相似,表明其可能为同源岩浆演化的产物。综合研究认为,这套火山岩具有岛弧火山岩特征,形成于板块俯冲拼贴过程中的岛弧环境。     

西准噶尔马拉苏早泥盆世火山岩LA-ICP-MS 锆石U-Pb 年龄、地球化学特征及其大地构造意义

马拉苏地区早泥盆世地层为一套滨海—浅海相火山—沉积岩系,对其中的火山岩夹层进行锆石U-Pb同位素定年和岩石地球化学研究,定年结果显示有大量的新太古代和中新元古代锆石,表明该区存在古老的大陆地壳物质。火山岩样品SiO2含量为52.38%~69.6%,Na2O含量为2.80%~4.85%,K2O为0.16%~0.96%,TiO2为0.5%~1.96%,Al2O3为14.62%~18.18%,MgO（1.08%~5.75%）变化范围较大,Mg#值在22.92~38之间,具有高钠、低钾的特征,属于钙碱性、低钾拉斑系列。稀土元素总量∑REE=73×10-6~115×10-6,LREE/HREE值为2.66~3.25,具有明显的Eu负异常（0.83~0.92）。玄武安山岩样品相对富集K、Rb、Ba、Sr等大离子亲石元素,亏损Nb、Ta、Zr、Hf等高场强元素,与典型火山弧玄武岩地球化学特征一致。英安斑岩样品也具有富集大离子亲石元素、亏损Nb、Ta、Ti等高场强元素的特征,反映源区可能有较多壳源物质的加入,其稀土元素配分曲线和微量元素蛛网图与玄武安山岩相似,表明其可能为同源岩浆演化的产物。综合研究认为,这套火山岩具有岛弧火山岩特征,形成于板块俯冲拼贴过程中的岛弧环境。     

东天山中段不同构造环境火山岩地球化学特征

东天山中段分布有阿齐山岛弧区（Ⅱ＿２）安山岩类和海沟区（Ⅱ＿１）混杂岩带玄武岩类火山岩，不同构造环境形成的火山岩各自具有与其环境相对应的地球化学特征。在常量元素、微量元素及稀土元素特征方面，它们可与世界上典型构造环境区形成的火山岩相对比。从地球化学特征发现，Ⅱ＿２区火山岩主要与早石炭世吐鲁番洋壳向塔里木陆壳俯冲有关，形成了Ⅱ＿２区钙碱性安山质火山岩。Ⅱ＿１区混杂岩带内呈洋壳残片产出的玄武岩类与吐鲁番洋盆的扩张有成因联系，岩石属于大洋拉斑玄武岩类。     

大兴安岭西缘玛尼吐组火山岩成因及构造指示

我国东北地区分布有大量中生代(侏罗纪至白垩纪)火山岩。选取大兴安岭西缘玛尼吐组粗安岩-粗面英安岩-流纹岩为研究对象,研究结果显示它们为高钾钙碱性的火山岩,主量、微量元素含量变化较大,SiO2含量为5671%~7185%,Na2O+K2O含量为592%~1018%,Na2O/K2O比值较高,为078~133,Mg#为306~564。玛尼吐组火山岩的稀土元素配分图和微量元素蛛网图右倾明显,可见明显的Nb、Ta、Ti、Sr和Eu负异常(Nb*=017~071,Sr*=024~115,Eu*=049~077)。稀土总量较高,为200×10-6~949×10-6。结果分析可知,玛尼吐组火山岩源岩与霍林河火山岩源岩相似,均为混合了少量先存古老地壳的新生基性下地壳。新生基性下地壳部分熔融形成安山质岩浆,并经角闪石+斜长石+钾长石+磷灰石+钛磁铁矿等的分离结晶形成了玛尼吐组粗安岩-粗面英安岩-流纹岩。玛尼吐组火山岩显著的岛弧地球化学特征说明其形成于与太平洋俯冲有关的岛弧环境。     

论景洪大勐龙印支期岛弧火山岩

滇西南地区澜沧江沿岸火山杂岩极为发育,是滇西地区规模最大的火山岩带。该区在晚古生代至中生代均有海相火山活动。在澜沧江火山岩带南段之景洪大勐龙以晚三叠纪的火山活动最为强烈。笔者根据景洪大勐龙钠质火山岩的岩石学和岩石化学特征及对其形成的地质构造环境的判析,认为大勐龙火山岩属印支期细碧角斑岩岩石序列,其形成的地质构造环境为岛弧火山岩。推测滇西之澜沧江大断裂带在晚三叠纪特提斯海可能存在与古海沟岛弧系有关     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。