西北太平洋俯冲带日本本州至中国东北段应力场反演

本研究基于Global CMT提供的1196个1976年11月—2017年1月MW4.6地震矩心矩张量解,对西北太平洋俯冲带日本本州至中国东北段的应力场进行反演计算,得到了从浅表到深部俯冲带应力状态的完整分布.结果显示:俯冲带浅表陆壳一侧应力场呈现水平挤压、垂向拉伸状态,洋壳一侧的应力状态则相反,即近水平拉张、近垂向压缩.沿着俯冲板片向下,应力主轴逐渐向俯冲板片轮廓靠拢,其中位于双地震层(120km深度附近)之上的部分,主张应力轴沿俯冲板片轮廓展布而又比其更为陡倾;双地震层内的应力模式同典型I型双层地震带内的应力模式一致,即上层沿俯冲板片轮廓压缩、下层沿俯冲板片轮廓拉伸;双地震层之下,应力模式逐步转变为主压应力轴平行于俯冲板片轮廓.通观所研究的整个俯冲系统,水平面内主压和主张应力轴基本保持了与西北太平洋板片俯冲方向上的一致性,同经典俯冲板片的应力导管模型所预言的俯冲带应力模式相符;而主张应力轴在俯冲板片表面之下的中源地震深度范围内转向海沟走向,或许同研究区域横跨日本海沟与千岛海沟结合带,改变的浅部海沟形态致使完整俯冲板片下部产生横向变形有关.     

The Banda Sea earthquake of 24 November 1983: evidence for intermediate depth thrust faulting in the Benioff zone

On 24 November 1983, a major earthquake occurred at 180 km depth beneath the Banda Sea. In the focal mechanism solution the pressure axis is almost horizontal, (azimuth 191°, plunge 02°) and the tension axis nearly vertical (plunge 88°). A comparison with the foreshock-aftershock pattern suggests that shear failure took place within the north-north-westerly dipping Benioff zone by thrust faulting along a southerly dipping plane. The focal mechanism solution does not conform to the usual pattern of the tension or compression axis being roughly parallel to the dip of the Benioff zone. Consequently the faulting could not have been caused by down-dip tension or compression within a sinking slab.     

Kamchatka subduction zone,May 2013: the Mw 8.3 deep earthquake,preceding shallow swarm and numerous deep aftershocks

A sequence of 98 teleseismically recorded earthquakes occurred off the east coast of Kamchatka at depths between 10-90 km around latitude 52.5°N and longitude 160°E on May 16–23, 2013. The swarm occurred along the northern limit of the rupture area of the 1952 M_w 9.0 great Kamchatka earthquake, the fifth largest earthquake in the history of seismic observations. On May 24, 2013 the strongest deep earthquake ever recorded of M_w 8.3 occurred beneath the Sea of Okhotsk at a depth of 610 km in the Pacific slab of the Kamchatka subduction zone, becoming the northernmost deep earthquake in the region. The deep M_w 8.3 earthquake occurred down-dip of the shallow swarm in a transition zone between the southern deep and northern shallow segments of the Pacific slab. Several deep aftershocks followed, covering a large, laterally elongated part of the slab. We suppose that the two described earthquake sequences, the May 16–23 shallow earthquake swarm and the May 24–28 deep mainshock-aftershock series, represent a single tectonic event in the Pacific slab having distinct properties at different depth levels. A low-angle underthrusting of the shallow part of the slab recorded by the shallow earthquake swarm activated the deep part; this process induced the deep mainshock-aftershock series only three days after the swarm. The domain of the subducting slab activated by the May 2013 earthquake occurrence was extraordinarily large both down-dip and along-strike.     

Lateral structure of the subducting pacific plate beneath the Hokkaido corner from intermediate and deep earthquakes

We present a study of the lateral structure and mode of deformation in the transition between the Kuril and Honshu subduction zones. We begin by examining the source characteristics of the January 19, 1969, intermediate depth earthquake north of Hokkaido in the framework of slab-tearing, which for the December 6, 1978 event has been well documented by previous studies. We use a least-squares body wave inversion technique, and find that its focal mechanism is comparable to the 1978 event. To understand the cause of these earthquakes, which in the case of the 1978 event occurred on a vertical tear fault but does not represent hinge faulting, we examine the available International Seismological Centre [ISC] hypocenters and Harvard centroid-moment tensor [CMT] solutions to determine the state of stress, and lateral structure and segmentation in the Kuril and northern Honshu slabs. These data are evaluated in the framework of two models. Model (A) requires the subducting slab at the Hokkaido corner to maintain surface area. Model (B) requires slab subduction to be dominated by gravity, with material subducting in the down-dip direction. The distribution of ICS hypocenters shows a gap in deep seismicity down-dip of the Hokkaido corner, supporting model (B). From the CMT data set we find that three types of earthquake focal mechanisms occur. The first (type A) represents dip-slip mechanisms consistent with down-dip tension or compression in the slab in a direction normal to the strike of the trench. These events occur throughout the Honshu and Kuril slabs with focal mechanisms beneath Hokkaido showing NNW plungingP andT axes consistent with the local slab geometry. The second (type B) occurs primarily at depths over 300 km in the southern part of the Kuril slab with a few events in the northern end of the Honshu deep seismicity. These earthquakes have focal mechanisms with P axes oriented roughly E-W, highly oblique to the direction of compression found in the type A events, with which they are spatially interspersed. The third (type C) group of earthquakes are those events which do not fit in either of the first two groups and consist of either strike-slip focal mechanisms, such as the tearing events, or oddly oriented focal mechanisms. Examination of the stress axes orientations for these three types reveals that the compressional axes of the type C events are consistent with those of type B. The slab tearing events are just differential motion reflecting the E-W compressive states of stress which is responsible for the type B family of events. There is no need to invoke down-dip extension which does not fit the slab geometry. We conclude that these two states of stress can be explained as follows: 1) The type A events and the seismicity distribution support model (B). 2) The type B and C events upport model (A). The solution is that the slab subducts according to model (B), but the flow in the mantle maintains a different trajectory, possibly induced by the plate motions, which produces the second state of E-W compressive stress.     

Frequency-dependent rupture process,stress change,and seismogenic mechanism of the 25 April 2015 Nepal Gorkha <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> 7.8 earthquake

On 25 April 2015, an M _w 7.8 earthquake occurred on the Main Himalaya Thrust fault with a dip angle of ~ 7° about 77 km northwest of Kathmandu, Nepal. This Nepal Gorkha event is the largest one on the Himalayan thrust belt since 1950. Here we use the compressive sensing method in the frequency domain to track the seismic radiation and rupture process of this event using teleseismic P waves recorded by array stations in North America. We also compute the distribution of static shear stress changes on the fault plane from a coseismic slip model. Our results indicate a dominant east-southeastward unilateral rupture process from the epicenter with an average rupture speed of ~3 km s^?1. Coseismic radiation of this earthquake shows clear frequency-dependent features. The lower frequency (0.05–0.3 Hz) radiation mainly originates from large coseismic slip regions with negative coseismic shear stress changes. In comparison, higher frequency (0.3–0.6 Hz) radiation appears to be from the down-dip part around the margin of large slip areas, which has been loaded and presents positive coseismic shear stress changes. We propose an asperity model to interpret this Nepal earthquake sequence and compare the frequency-dependent coseismic radiation with that in subduction zones. Such frequency-dependent radiation indicates the depth-varying frictional properties on the plate interface of the Nepal section in the main Himalaya thrust system, similar to previous findings in oceanic subduction zones. Our findings provide further evidence of the spatial correlation between changes of static stress status on the fault plane and the observed frequency-dependent coseismic radiation during large earthquakes. Our results show that the frequency-dependent coseismic radiation is not only found for megathrust earthquakes in the oceanic subduction environment, but also holds true for thrust events in the continental collision zone.     

Rupture process of large earthquakes in the northern Mexico subduction zone

The Cocos plate subducts beneath North America at the Mexico trench. The northernmost segment of this trench, between the Orozco and Rivera fracture zones, has ruptured in a sequence of five large earthquakes from 1973 to 1985; the Jan. 30, 1973 Colima event (M _s 7.5) at the northern end of the segment near Rivera fracture zone; the Mar. 14, 1979 Petatlan event (M _s 7.6) at the southern end of the segment on the Orozco fracture zone; the Oct. 25, 1981 Playa Azul event (M _s 7.3) in the middle of the Michoacan gap; the Sept. 19, 1985 Michoacan mainshock (M _s 8.1); and the Sept. 21, 1985 Michoacan aftershock (M _s 7.6) that reruptured part of the Petatlan zone. Body wave inversion for the rupture process of these earthquakes finds the best: earthquake depth; focal mechanism; overall source time function; and seismic moment, for each earthquake. In addition, we have determined spatial concentrations of seismic moment release for the Colima earthquake, and the Michoacan mainshock and aftershock. These spatial concentrations of slip are interpreted as asperities; and the resultant asperity distribution for Mexico is compared to other subduction zones. The body wave inversion technique also determines theMoment Tensor Rate Functions; but there is no evidence for statistically significant changes in the moment tensor during rupture for any of the five earthquakes. An appendix describes theMoment Tensor Rate Functions methodology in detail.The systematic bias between global and regional determinations of epicentral locations in Mexico must be resolved to enable plotting of asperities with aftershocks and geographic features. We have spatially shifted all of our results to regional determinations of epicenters. The best point source depths for the five earthquakes are all above 30 km, consistent with the idea that the down-dip edge of the seismogenic plate interface in Mexico is shallow compared to other subduction zones. Consideration of uncertainties in the focal mechanisms allows us to state that all five earthquakes occurred on fault planes with the same strike (N65°W to N70°W) and dip (15±3°), except for the smaller Playa Azul event at the down-dip edge which has a steeper dip angle of 20 to 25°. However, the Petatlan earthquake does prefer a fault plane that is rotated to a more east-west orientation—one explanation may be that this earthquake is located near the crest of the subducting Orozco fracture zone. The slip vectors of all five earthquakes are similar and generally consistent with the NUVEL-predicted Cocos-North America convergence direction of N33°E for this segment. The most important deviation is the more northerly slip direction for the Petatlan earthquake. Also, the slip vectors from the Harvard CMT solutions for large and small events in this segment prefer an overall convergence direction of about N20°E to N25°E.All five earthquakes share a common feature in the rupture process: each earthquake has a small initial precursory arrival followed by a large pulse of moment release with a distinct onset. The delay time varies from 4 s for the Playa Azul event to 8 s for the Colima event. While there is some evidence of spatial concentration of moment release for each event, our overall asperity distribution for the northern Mexico segment consists of one clear asperity, in the epicentral region of the 1973 Colima earthquake, and then a scattering of diffuse and overlapping regions of high moment release for the remainder of the segment. This character is directly displayed in the overlapping of rupture zones between the 1979 Petatlan event and the 1985 Michoacan aftershock. This character of the asperity distribution is in contrast to the widely spaced distinct asperities in the northern Japan-Kuriles Islands subduction zone, but is somewhat similar to the asperity distributions found in the central Peru and Santa Cruz Islands subduction zones. Subduction of the Orozco fracture zone may strongly affect the seismogenic character as the overlapping rupture zones are located on the crest of the subducted fracture zone. There is also a distinct change in the physiography of the upper plate that coincides with the subducting fracture zone, and the Guerrero seismic gap to the south of the Petatlan earthquake is in the wake of the Orozco fracture zone. At the northern end, the Rivera fracture zone in the subducting plate and the Colima graben in the upper plate coincide with the northernmost extent of the Colima rupture zone.     

New data on the Indus Kohistan seismic zone and its extension into the Hazara–Kashmir Syntaxis, NW Himalayas of Pakistan

This paper deals with the data obtained from local networks in northern Pakistan for 251 earthquakes of magnitude ≥4.0 for October 8, 2005 to December 31, 2006 period. The study presents focal mechanism solutions (FMS) of 12 pre- (1904–2005) and 17 post- (October 8, 2005–December, 2005) Muzaffarabad Earthquake, their detailed tectonic interpretation, and correlation with surface evidence of co-seismic rupture with published synthetic aperture radar data. Distribution of landslides obtained from National Engineering Services of Pakistan and the earthquake damages are also discussed. Aftershock distribution, which is more prominent in the crystalline zone (northwest of Muzaffarabad), defines a 50-km-wide NW–SE trending zone that extends for 200 km from the main mantle thrust to the center of the Hazara–Kashmir Syntaxis. The FMS of the main shock and 16 aftershocks having magnitude ≥4.0 indicate thrusting to be the dominant mechanism with rupture planes having NW–SE trend and NE dip. In addition, 12 FMS of pre-Muzaffarabad Earthquake (1904–2004) from the same area have been determined and results are compared. This leads to the conclusion that the wedge-shaped NW–SE trending blind zone, referred to by earlier workers as the Indus Kohistan Seismic Zone (IKSZ), has been activated during the Muzaffarabad earthquake. The right-lateral component in all FMS, supported by the surface evidences, suggests the involvement of Balakot–Bagh Fault (BBF). We propose that the IKSZ is the source of the October 8, 2005 Muzaffarabad earthquake that reactivated the BBF. Furthermore, the IKSZ does not end at the nose of the syntaxis but extends further southeast of it. Tectonic complexity seems to be due to a variety of factors. Also, thrust and reverse solutions near the northern collisional boundary (main mantle thrust) have mostly NE/SW-directed P-axis orientations. From the detailed FMS analysis, three conclusions have been drawn: (1) Shallow events (depth ≤10 km) with prominent strike slip solutions (earlier earthquakes) are associated with the surface strike slip faults (e.g., Muzaffarabad Fault) and/or the Besham domal structure; (2) moderate depth events (depth 10–25 km) with thrust/reverse solutions but having minor right-lateral strike slip component (all Muzaffarabad earthquakes and two earlier) are associated with the IKSZ; (3) deeper earthquakes (depth below IKSZ) with pure thrust/reverse solutions may be related to the under-thrusting of the Indian plate beneath the IKSZ, which represents a major thrust zone. Imbricate thrusting and breaking and thickening of the crust are considered to be caused by steep bending of the under-thrusting plate at the collisional boundary. An erratum to this article can be found at     

Space Variations of Stress Along the Tyrrhenian Wadati-Benioff Zone

—Gephart and Forsyth’s (1984) algorithm for stress inversion of earthquake fault-plane solutions has been applied to a set of ninety intermediate and deep events occurring in the southern Tyrrhenian region between 1976 and 1995. P- and S-wave data from local seismic networks in southern Italy, the Italian National Network and international bulletins, have been used for hypocenter and focal mechanism computations. Stress inversion runs performed after accurate selection and weighting of fault-plane solutions have allowed us to identify stress space variations at a higher level of detail than available from all previous investigations carried out in the study area. The maximum compressive stress has been shown to follow the depth-decreasing dip of the Wadati-Benioff zone, along the entire zone from a depth of 90 km, to the depth of the deepest events (about 500 km). Variations to such a stress pattern have been found, possibly related to mantle dynamics and the complex composition of the subducting structure. The diffused state of down-dip compression suggests that the Tyrrhenian subduction has already evolved to the point where the lower end of the slab has reached high-strength mantle materials, the load of the excess mass is entirely supported from below and most of the subducted slab is under compression. In agreement with the lack of large, shallow thrusting events in the immersion zone, the findings of the present study appear to agree well with geodynamic models assuming a passive subduction process with eastward roll-back of the Ionian lithosphere in the study area. In this context, the depth-decrease of the slab dip may also find a reasonable explanation.     

Aftershocks of the San Marcos earthquake of April 25, 1989 (M S =6.9) and some implications for the Acapulco-San Marcos,Mexico, seismic potential

Aftershock activity following the April 25, 1989 (M _S =6.9) earthquake near San Marcos, Guerrero, Mexico, was monitored by a temporary network installed twelve hours after the mainshock and remaining in operation for one week. Of the 350 events recorded by this temporary array, 103 were selected for further analysis in order to determine spatial characteristics of the aftershock activity. An aftershock area of approximately 780 km² is delimited by the best quality locations. The area of highest aftershock density lies inside an area delimited by the aftershocks of the latest large event in the region in 1957 (M _S =7.5) and it partially overlaps the zone of maximum intensity of the earlier 1907 (M _S =7.7) shock. Aftershocks also appear to cluster close to the mainshock hypocenter. This clustering agrees with the zone of maximum slip during the mainshock, as previously determined from strong motion records. A low angle Benioff zone is defined by the aftershock hypocenters with a slight tendency for the slab to follow a subhorizontal trajectory after a 110 km distance from the trench axis, a feature which has been observed in the neighboring Guerrero Gap. A composite focal mechanism for events close to the mainshock which also coincides with the zone of largest aftershock density, indicates a thrust fault similar to the mainshock fault plane solution.The San Marcos event took place in an area which could be considered as a mature seismic gap. Due to the manner in which strain release has been observed to previously occur, the occurrence of a major event, overlapping both the neighboring Guerrero Gap and the San Marcos Gap segments of the Mexican thrust, cannot be overlooked.     

Spatio-temporal variations of seismicity in the southern Peru and northern Chile seismic gaps

The spatio-temporal variation of seismicity in the southern Peru and northern Chile seismic gaps is analyzed with teleseismic data (m _b 5.5) between 1965 and 1991, to investigate whether these gaps present the precursory combination of compressional outer-rise and tensional downdip events observed in other subduction zones. In the outer-rise and the inner-trench (0 to 100 km distance from the trench) region, lower magnitude (5.0m _b <5.5) events were also studied. The results obtained show that the gaps in southern Peru and northern Chile do not present compressional outer-rise events. However, both gaps show a continuous, tensional downdip seismicity. For both regions, the change from compressional to tensional regime along the slab occurs at a distance of about 160 km from the trench, apparently associated with the coupled-uncoupled transition of the interplate contact zone. In southern Peru, an increase of compressional seismicity near the interplate zone and of tensional events (5.0m _b 6.3) in the outer-rise and inner-trench regions is observed between 1987 and 1991. A similar distribution of seismicity in the outer-rise and inner-trench regions is observed with earthquakes (m _b <5.5). In northern Chile there is a relative absence of compressional activity (m _b 5.5) near the interplate contact since the sequence of December 21, 1967. After that, only a cluster of low-magnitude compressional events has been located in the area 50 to 100 km from the trench. The compressional activity occurring near the interplate zone in both seismic gaps represents that a seismic preslip is occurring in and near the plate contact. Therefore, if this seismic preslip is associated with the maturity of the gap, the fact that it is larger in southern Peru than in northern Chile may reflect that the former gap is more mature than the latter. However, the more intense downdip tensional activity and the absence of compressional seismicity near the contact zone observed in northern Chile, may also be interpreted as evidence that northern Chile is seismically more mature than southern Peru. Therefore, the observed differences in the distribution of stresses and seismicity analyzed under simple models of stress accumulation and transfer in coupled subduction zones are not sufficient to assess the degree of maturity of a seismic gap.     

Relocations of Earthquakes (1899–1917) in South-Central Alaska

I have relocated 18 earthquakes occurring in the south-central Alaska region between 1899 and 1917 using a bootstrap relocation technique. Locations of events within the Yakutat region suggest that the 1899 sequence began on 4 September with a M_S = 7.9 event within the area of the Pamplona fault zone/western Transition fault zone, rupturing the western portion of the North American/Pacific plate interface. A M_S = 7.4 event on 10 September appears to have ruptured the offshore portion of the plate interface to the east of the 4 September event. This was followed by a M_S = 8.0 event that likely ruptured the onshore and down-dip portion of the plate interface. A M_S = 7.0 event in 1908 may have ruptured a small portion of the plate interface between the 4 September and 10 September events. Events occurring between 1911 and 1916 in the Prince William Sound region appear to be slab events occurring in similar locations to more recent seismicity. Within the Kodiak region the 1900 earthquake of M_S = 7.7 has a location consistent with the rupture of the Kodiak asperity which also ruptured during the 1964 great Alaska earthquake. Other large magnitude Kodiak events appear to be associated with regions of recent seismicity, including the Karluk Lake area of southwestern Kodiak Island and the Albatross Basin located offshore southeast of Kodiak Island. Space-time seismicity patterns since 1899 indicate that magnitude 6 to7 events have occurred with regularity in the Kodiak Island region; that there has been a lack of magnitude ≥ 6 events in the Prince William Sound region since 1964, and that the Yakutat region has remained notably quiescent at the magnitude ≥ 6 level.     

A determination of source properties of large intraplate earthquakes in Alaska

Historically, large and potentially hazardous earthquakes have occurred within the interior of Alaska. However, most have not been adequately studied using modern methods of waveform modeling. The 22 July 1937, 16 October 1947, and 7 April 1958 earthquakes are three of the largest events known to have occurred within central Alaska (M _s =7.3,M _s =7.2 andM _s =7.3, respectively). We analyzed teleseismic body waves to gain information about the focal parameters of these events. In order to deconvolve the source time functions from teleseismic records, we first attempted to improve upon the published focal mechanisms for each event. Synthetic seismograms were computed for different source parameters, using the reflectivity method. A search was completed which compared the hand-digitized data with a suite of synthetic traces covering the complete parameter space of strike, dip, and slip direction. In this way, the focal mechanism showing the maximum correlation between the observed and calculated traces was found. Source time functions, i.e., the moment release as a function of time, were then deconvolved from teleseismic records for the three historical earthquakes, using the focal mechanisms which best fit the data. From these deconvolutions, we also recovered the depth of the events and their seismic moments. The earthquakes were all found to have a shallow foci, with depths of less than 10 km.The 1937 earthquake occurred within a northeast-southwest band of seismicity termed the Salcha seismic zone (SSZ). We confirm the previously published focal mechanism, indicating strike-slip faulting, with one focal plane parallel to the SSZ which was interpreted as the fault plane. Assuming a unilateral fault model and a reasonable rupture velocity of between 2 and 3 km/s, the 21 second rupture duration for this event indicates that all of the 65 km long SSZ may have ruptured during this event. The 1947 event, located to the south of the northwest-southeast trending Fairbanks seismic zone, was found to have a duration of about 11 seconds, thus indicating a rupture length of up to 30 km. The rupture duration of the 1958 earthquake, which occurred near the town of Huslia, approximately 400 km ENE of Fairbanks, was found to be about 9 seconds. This gives a rupture length consistent with the observed damage, an area of 16 km by 64 km.     

The rupture process and tectonic implications of the great 1964 Prince William Sound earthquake

We have determined the rupture history of the March 28, 1964, Prince Williams Sound earthquake (M _w=9.2) from long-period WWSSNP-wave seismograms. Source time functions determined from the long-periodP waves indicate two major pulses of moment release. The first and largest moment pulse has a duration of approximately 100 seconds with a relatively smooth onset which reaches a peak moment release rate at about 75 seconds into the rupture. The second smaller pulse of moment release starts at approximately 160 seconds after the origin time and has a duration of roughly 40 seconds. Because of the large size of this event and thus a deficiency of on-scale, digitizableP-wave seismograms, it is impossible to uniquely invert for the location of moment release. However, if we assume a rupture direction based on the aftershock distribution and the results of surface wave directivity studies we are able to locate the spatial distribution of moment along the length of the fault. The first moment pulse most likely initiated near the epicenter at the northeastern down-dip edge of the aftershock area and then spread over the fault surface in a semi-circular fashion until the full width of the fault was activated. The rupture then extended toward the southwest approximately 300 km (Ruff andKanamori, 1983). The second moment pulse was located in the vicinity of Kodiak Island, starting at 500 km southwest of the epicenter and extending to about 600 km. Although the aftershock area extends southwest past the second moment pulse by at least 100 km, the moment release remained low. We interpret the 1964 Prince William Sound earthquake as a multiple asperity rupture with a very large dominant asperity in the epicentral region and a second major, but smaller, asperity in the Kodiak Island region.The zone that ruptured in the 1964 earthquake is segmented into two regions corresponding to the two regions of concentrated moment release. Historical earthquake data suggest that these segments behaved independently during previous events. The Kodiak Island region appears to rupture more frequently with previous events occurring in 1900, 1854, 1844, and 1792. In contrast, the Prince William Sound region has much longer recurrence intervals on the order of 400–1000 years.     

Stresses along the metastable wedge of olivine in a subducting slab: possible explanation for the Tonga double seismic layer

A numerical calculation of the stresses associated with changes in volume during phase transitions of olivine in a descending slab results in a double layer of high shear stress along the metastable olivine wedge in the depth range 350-460 km. Stress in the upper layer is in-plane tensional and stress in the lower layer is down-dip compressional. The modeled stress field agrees with observations of stress in the Tonga double seismic zone. High shear stress also exists in the slab at depths below the metastable wedge. This stress distribution involves down-dip compression and trench-parallel tension, which agrees with about half of the focal mechanisms in the Tonga slab at depths of 460-690 km. The model supports the idea that at least two possible stress release mechanisms for deep earthquakes may act in the Tonga subducting slab. One, transformational faulting, is restricted to the metastable wedge while the other one acts below the metastable wedge.     

2022年门源MS6.9和2016年门源MS6.4地震序列比较分析

2022年1月8日青海省海北州门源县发生M_S6.9地震,震中距离2016年1月21日门源M_S6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源M_S6.9地震和2016年门源M_S6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。     

Where and why do large shallow intraslab earthquakes occur?

We try to find how often, and in what regions large earthquakes (M≥7.0) occur within the shallow portion (20-60 km depth) of a subducting slab. Searching for events in published individual studies and the Harvard University centroid moment tensor catalogue, we find twenty such events in E. Hokkaido, Kyushu-SW, Japan, S. Mariana, Manila, Sumatra, Vanuatu, N. Chile, C. Peru, El Salvador, Mexico, N. Cascadia and Alaska. Slab stresses revealed from the mechanism solutions of these large intraslab events and nearby smaller events are almost always down-dip tensional. Except for E. Hokkaido, Manila, and Sumatra, the upper plate shows horizontal stress gradient in the arc-perpendicular direction. We infer that shear tractions are operating at the base of the upper plate in this direction to produce the observed gradient and compression in the outer fore-arc, balancing the down-dip tensional stress of the slab. This tectonic situation in the subduction zone might be realized as part of the convection system with some conditions, as shown by previous numerical simulations.     

Coseismic vertical deformation of the MS8.0 Wenchuan earthquake from repeated levelings and its constraint on listric fault geometry

The devastating M_S8.0 Wenchuan earthquake ruptured two large parallel thrust faults along the middle segment of the Longmenshan thrust belt. Preseismic and postseismic leveling data indicated the hanging wall of the YingxiuBeichuan-Nanba thrust fault mainly presented coseismic uplift with respect to the reference point at Pingwu county town, and the observed maximum uplift of 4.7 m is located at Beichuan county (Qushan town) which is about 100 m west of the fault scarp. The foot wall of the Yingxiu-Beichuan-Nanba thrust fault mainly showed subsidence with maximum subsidence of 0.6 m near the rupture. By employing a listric dislocation model, we found that the fault geometry model of exponential dip angle δ= 88°?×1-exp(-9/h) with depth of 18 km and uniform thrust-slip of 5.6 m could fit the observed coseismic vertical deformation very well, which verifies the listric thrust model of the Longmenshan orogenic zone.

     

2017年精河MS6.6地震的断层参数和破裂过程

利用远震资料、近场强震资料和合成孔径雷达干涉同震形变资料确定了2017年8月9日精河M_S6.6地震的断层面参数及震源破裂细节。为得到可靠的断层几何参数,发展了一套基于InSAR数据滑动分布反演的三维格点搜索流程,对本次地震断层面的走向、倾角和震源深度进行了格点搜索。结果显示,地震断层面走向为95°,倾角为47°,震源深度为14 km。基于搜索得到的断层模型进行破裂过程联合反演的结果显示:精河M_S6.6地震为一次单侧破裂事件,最大滑动量约为0.8 m,滑动区域集中在断层面上震源以西5—15 km,沿倾向15—25 km,破裂主要发生在10 km深度以下区域。断层面上的平均滑动角为106°。整个破裂过程释放的标量地震矩为3.6×1018 N·m,对应矩震级为M_W6.3。破裂过程持续约9 s,期间的破裂速度约为2.1—2.6 km/s。由于地震破裂主要集中在10 km以下,未来可能需要关注该区域0—10 km发生潜在地震的可能性。