利用大地电磁技术揭示2016年1月21日青海门源MS6.4地震隐伏地震构造和孕震环境

2016年1月21日01时13分在青海省海北州门源县发生了M_S6.4地震,震中位置位于青藏高原东北缘地区祁连造山带内的祁连—海原断裂带冷龙岭断裂部分附近,震源深度约11.4 km,震源机制解显示该次地震为一次纯逆冲型地震.我们于2015年7—8月期间完成了跨过祁连造山带紧邻穿过2016年1月21日青海门源M_S6.4地震震中区的大地电磁探测剖面（DKLB-M）和古浪地震大地电磁加密测量剖面（HYFP）.本文对所采集到的数据进行了先进的数据处理和反演工作,获得了二维电性结构图.结合青藏高原东北缘地区最新获得的相对于欧亚板块2009—2015年GPS速度场分布特征,1月21日门源M_S6.4地震主震与余震分布特征以及其他地质与地球物理资料等,探讨了门源M_S6.4地震的发震断裂,断裂带空间展布、延伸位置,分析了门源M_S6.4地震孕震环境与地震动力学背景等以及祁连山地区深部构造特征等相关问题.所获结论如下：2016年门源M_S6.4地震震源区下存在较宽的SW向低阻体,推测冷龙岭断裂下方可能形成了明显的力学强度软弱区,这种力学强度软弱区的存在反映了介质的力学性质并促进了地震蠕动、滑移和发生;冷龙岭北侧断裂可能对门源M_S6.4地震主震和余震的发生起控制作用,而该断裂为冷龙岭断裂在青藏高原北东向拓展过程中产生的伴生断裂,表现出逆冲特征;现今水准场、重力场、GPS速度场分布特征以及大地电磁探测结果均表明祁连—海原断裂带冷龙岭断裂部分为青藏高原东北缘地区最为明显的一条边界断裂,受控于青藏高原北东向拓展和阿拉善地块的阻挡作用,冷龙岭断裂附近目前正处于青藏高原北东向拓展作用最强烈、构造转化最剧烈的地区,这种动力学环境可能是门源M_S6.4地震发生的最主要原因,与1927年古浪M_S8.0地震和1954年民勤M_S7.0地震相似,2016年门源M_S6.4地震的发生同样是青藏高原北东向拓展过程中的一次地震事件.     

SLIP RATES OF THE RIYUE MT. FAULT AT DEZHOU SEGMENT SINCE LATE PLEISTOCENE

The Riyue Mt. Fault is a secondary fault controlled by the major regional boundary faults (East Kunlun Fault and Qilian-Haiyuan Fault). It lies in the interior of Qaidam-Qilianshan block and between the major regional boundary faults. The Riyue Mt. fault zone locates in the special tectonic setting which can provide some evidences for recent activity of outward extension of NE Tibetan plateau, so it is of significance to determine the activity of Riyue Mt. Fault since late Pleistocene to Holocene. In this paper, we have obtained some findings along the Dezhou segment of Riyue Mt. Fault by interpreting the piedmont alluvial fans, measuring fault scarps, and excavating trenches across the fault scarp. The findings are as follows:(1) Since the late Pleistocene, there are an alluvial fan f_p and three river terraces T₁-T₃ formed on the Dezhou segment. The abandonment age of f_p is approximately (21.2±0.6) ka, and that of the river terrace T₂ is (12.4±0.11) ka. (2) Since the late Pleistocene, the dextral strike-slip rate of the Riyue Mt. Fault is (2.41±0.25) mm/a. In the Holocene, the dextral strike-slip rate of the fault is (2.18±0.40) mm/a, and its vertical displacement rate is (0.24±0.16) mm/a. This result indicates that the dextral strike-slip rate of the Riyue Mt. Fault has not changed since the late Pleistocene. It is believed that, as one of the dextral strikeslip faults, sandwiched between the the regional big left-lateral strike-slip faults, the Riyue Mt. Fault didn't cut the boundary zone of the large block. What's more, the dextral strike-slip faults play an important role in the coordination of deformation between the sub-blocks during the long term growth and expansion of the northeast Tibetan plateau.     

HOLOCENE LEFT-LATERAL SLIP RATE OF THE LENGLONGLING FAULT,NORTHEASTERN MARGIN OF THE TIBETAN PLATEAU

The Lenglongling Fault(LLLF) is a major active left-lateral strike-slip fault along the northeastern margin of the Tibetan plateau. Fault slip rate is of great significance for researching the dynamics of tectonic deformation in NE Tibetan plateau and understanding the activity and seismic risk of the fault. However, slip rate of the LLLF, which remains controversial, is limited within~3~24mm/a, a relatively broad range. Taking Niutougou site(37.440 2°N, 102.094 0°E)and Chailong site(37.447 3°N, 102.063 0°E) in the upstream of Talihua gully in Menyuan County, Qinghai Province as the research objects, where faulted landform is typical, we analyzed the displacement evolution model and measured the slip amounts by back-slip of the faulted landform using high-resolution DEM from Terrestrial LiDAR and high-precision satellite images of Google Earth, and by collecting and testing samples from stratigraphic pit excavated in the faulted landform surface and stripping fresh stratigraphic section, we determined the abandonment age of the surface. Holocene slip rate obtained from Niutougou site and Chailong site is(6.4±0.7)mm/a and(6.6±0.3)mm/a, respectively, which have a good consistency. Taking into account the error range of the slip rate, the left-lateral slip rate of the LLLF is(6.6±0.8)mm/a since Holocene, which is between the previons results from geological method, also within the slip rate range of 4.2~8mm/a from InSAR, but slightly larger than that from GPS((4.0±1.0)mm/a). Late Quaternary slip rate of Qilian-Haiyuan fault zone, which displays an arc-shape distribution, turns to be the largest in LLLF region. The most intensive uplift in the LLLF region of the NE Tibetan plateau confirms the important role of the LLLF in accommodating the eastward component of movement of Tibetan plateau relative to the Gobi-Ala Shan block from one side.     

青藏高原东南缘滇缅地块NE向走滑断裂带的新构造活动与大地震危险性

2008年汶川大地震发生以来,位于青藏高原东南缘实皆断裂带和红河断裂系之间滇缅地块发生了一系列MS5.5以上中强地震,该地区未来是否可能发生MS7.0以上大地震的危险性,十分令人关注.本研究以滇缅地块内部最长的NE向走滑断裂带——南汀河断裂带为例,结合遥感图像、数字高程模型(DEM)和1∶20万地质图,对断裂带附近的水系系统拐弯地貌特征和大型地质体单元位错信息进行提取分析,并根据这些断裂带左旋走滑起始年代(5 Ma),推算其长期走滑速率.研究结果表明研究区NE向断裂带自上新世以来,具有2mm·a-1的长期走滑速率;此外,根据发生在断裂带上及其周边地区的历史地震、大震复发周期和区内现代构造应力场的分布分析发现,沿这些NE向大型左旋走滑断裂带未来具有MS7.0以上大地震发生的危险性.     

RESEARCH ON ACTIVITY OF ZHANGJIAKOU-BOHAI FAULT ZONE BASED ON GPS OBSERVATIONS

The northwestern section of the Zhangjiakou-Bohai fault zone starts in the west of Zhangjiakou, extending southeast through Huailai, Shunyi and Tianjin and entering into the Bohai Sea, with a width up to several tens of kilometers, narrow in the west and wide in the east. The Neogene-Quaternary has extended in the northwest and southeast direction, forming a large regional active structure. There are many earthquakes of magnitude 7 or above in the history on the Zhangjiakou-Bohai fault zone and it is also a strong earthquake activity zone in eastern China. Therefore, the modern tectonic activities of this fault zone have an important impact on regional seismic hazard, and are of great significance for earthquake prediction and disaster reduction. In this paper, using the mobile GPS station observation data of 1999, 2007, 2009, 2011, 2013 and 2015, and with the rigid-linear elastic block motion model equation proposed by LI Yan-xing, the horizontal deformation rate and strain rate of the Zhangjiakou-Bohai fault zone of the five adjacent periods of 1999-2007, 2007-2009, 2009-2011, 2011-2013 and 2013-2015 were calculated, the tectonic activity characteristics and evolution of the fault zone were studied. The results show that in the five periods, the average deformation rate of the Zhangjiakou-Bohai fault zone is 1. 74mm/a, the left-lateral strike-slip rate is 1.59mm/a, and the compression rate is -0.59mm/a. The Zhangjiakou-Bohai fault zone is characterized by left-lateral strike-slip and compression on the whole, and the left-lateral strike-slip rate is greater than the compression rate at each period. The strike-slip rate is significantly greater than the compression rate, indicating that the activity of Zhangjiakou-Bohai fault zone is dominated by left-lateral strike-slip faulting with compression. The minimum principal strain rate of the Zhangjiakou-Bohai fault zone in the five periods varies from -12.06×10^-9/a to -4.62×10^-9/a, and the average minimum principal strain axis direction is N63.9°E, with little change in direction. The maximum principal strain rate varies from 1.55×10^-9/a to 5.99×10^-9/a, and the average maximum principal strain axis direction is N333.9°W, the direction does not change much. The strike of the Zhangjiakou-Bohai fault zone is NWW(the overall strike is calculated by N300°W), and the normal strain rate of the fault zone is -5.87×10^-9/a(being compressional), and the shear strain rate is 12.70×10^-9/a. The shear strain rate on the fault zone is about twice the value of the normal strain rate, and the shear strain rate of the fault zone is greater than the normal strain rate, which indicates the shear stress of the 5 periods of 1999-2007, 2007-2009, 2009-2011, 2011-2013 and 2013-2015 is relatively significant, suggesting that the fault plain is dominated by left-lateral shear stress. This suggests that the Japan 3·11 earthquake has little effect on the deformation strain of the Zhangjiakou-Bohai fault zone, and it does not change the nature of activity of the fault zone. The tectonic activity is still inheriting. Since the tectonic activity of the Zhangjiakou-Bohai fault zone has gradually decreased after the Japan 3·11 earthquake, the deformation strain evolution trend has gradually returned to a unified consistent state. Therefore, the deformation strain state of the Zhangjiakou-Bohai fault zone does not have the condition for strong earthquakes.     

LATE QUATERNARY TECTONIC DEFORMATION AROUND THE HUJIATAI ANTICLINE ALONG THE EAST SEGMENT OF THE FODONGMIAO-HONGYAZI FAULT,NORTHERN QILIAN SHAN: AN INSIGHT ON THE SEISMOGENIC PATTERN OF 1609 HONGYAZI M7 1/4 EARTHQUAKE

The Fodongmiao-Hongyazi Fault (FHF)is one of the most active faults of the northern Qilian thrust fault zone. The 1609 Hongyazi M7 1/4 earthquake occurred on the east segment of the FHF, an area with a complex geometry at the Mayinghe River site. The seismogenic pattern of this earthquake revealed by complex surface ruptures remains unclear. In this paper, we focus on active tectonic deformation around the Hujiatai anticline (HA)in the Mayinghe River site. Combining with topographic survey via dGPS across deformed terraces and alluvial fans, a field survey of the geological section across the HA, the characteristics of the active fold and several sub-faults were constrained. Meanwhile, combined with the seismic reflection profiles passing through the anticline, the correspondence relationship between surface expressions of this tectonic and the deep structure was discussed. According to our research, the HA is a result of northward propagation of the range-front thrust fault F₁. At the same time, a thrust fault F₂ with dextral strike-slip motion and a thrust fault F₄ were formed on the east side and north side of the HA, respectively. These two active faults accommodated local deformation. Trench results and ¹⁴C dating reveal that the 1609 Hongyazi M7 1/4 earthquake ruptured the T₁ terrace in the Huangcaoba site. Combined with previous field investigations and literature about the 1609 Hongyazi earthquake, we suggest that this earthquake occurred on the range-front fault F₁, and the depth of the hypocenter may be about 8~22km.     

ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY

The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers. The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress.     

MIGRATION OF LARGE EARTHQUAKES IN TIBETAN BLOCK AREA AND DISSCUSSION ON MAJOR ACTIVE REGION IN THE FUTURE

On the basis of summarizing the circulation characteristics and mechanism of earthquakes with magnitude 7 or above in continental China, the spatial-temporal migration characteristics, mechanism and future development trend of earthquakes with magnitude above 7 in Tibetan block area are analyzed comprehensively. The results show that there are temporal clustering and spatial zoning of regional strong earthquakes and large earthquakes in continental China, and they show the characteristics of migration and circulation in time and space. In the past 100a, there are four major earthquake cluster areas that have migrated from west to east and from south to north, i.e. 1)Himalayan seismic belt and Tianshan-Baikal seismic belt; 2)Mid-north to north-south seismic belt in Tibetan block area; 3)North-south seismic belt-periphery of Assam cape; and 4)North China and Sichuan-Yunnan area. The cluster time of each area is about 20a, and a complete cycle time is about 80a. The temporal and spatial images of the migration and circulation of strong earthquakes are consistent with the motion velocity field images obtained through GPS observations in continental China. The mechanism is related to the latest tectonic activity in continental China, which is mainly affected by the continuous compression of the Indian plate to the north on the Eurasian plate, the rotation of the Tibetan plateau around the eastern Himalayan syntaxis, and the additional stress field caused by the change of the earth's rotation speed.
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with M_S7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out.     

西秦岭临潭-宕昌断裂第四纪最新活动特征

临潭-宕昌断裂是西秦岭造山带内一条重要的分支断裂,其最新活动特征是分析西秦岭构造变形的重要依据。临潭-宕昌断裂的新构造活动强烈,中强地震频繁,但目前对于断裂的新活动特征研究程度较低,未见有其全新世活动地质地貌证据的报道。文中基于遥感解译、宏观地貌分析研究断裂的长期活动表现和分段性;同时通过地质地貌考察、无人机摄影测量、差分GPS和放射性碳测年等方法定量研究断裂的新活动特征;最后基于研究结果探讨了断裂及附近区域的地震危险性和区域构造变形。结果表明:根据断层迹线收敛程度和宏观地貌差异,可将临潭-宕昌断裂分为西、中、东3段;断裂的运动性质以左旋走滑为主,兼具逆冲分量,左旋走滑使洮河及其支流、冲沟和山脊等发生同步左旋拐弯,最大左旋位移可达3km,逆冲分量使新近纪盆地边缘和内部形成300~500m的垂向位移;断裂的最新活动时代为全新世,限定了1次2 090~7 745a BP(置信度为2σ)的全新世古地震事件;全新世早期以来,临潭-宕昌断裂东段主干断裂的左旋走滑速率为0.86~1.65mm/a,垂直滑动速率为0.05~0.10mm/a。临潭-宕昌断裂分配了约2mm/a的左旋走滑分量,是东昆仑-西秦岭阶区变形分配的关键断裂之一。     

祁连山活动断裂带中东段冷龙岭断裂滑动速率的精确厘定

冷龙岭活动断裂是青藏高原东北缘祁连山断裂带的重要组成部分, 位于祁连山断裂带中东段。 根据野外考察结果认为, 该断裂全新世以来活动强烈, 主要表现为左旋走滑运动, 并伴有正倾滑性质, 断错地貌特征明显。 通过高分辨率SPOT卫星数字影像和大比例尺航空照片处理确定断层的位置, 利用断错地貌测图、 热释光(TL)和碳十四(¹⁴C)测年方法, 厘定了冷龙岭断裂的晚第四纪滑动速率, 冷龙岭断裂晚更新世以来的平均水平滑动速率为(4.3±0.7)mm/a, 全新世晚期以来的平均水平滑动速率为(3.9±0.36)mm/a。     

青海拉脊山断裂带新活动特征的初步研究

拉脊山断裂带由拉脊山北缘断裂和拉脊山南缘断裂两条向NE凸出的弧形断裂所组成，分别长约230km和220km。它们是介于NNW向的热水一日月山右旋走滑断裂带和NWW向的西秦岭北缘左旋走滑断裂带之间的一个大型挤压构造区和构造转换带，也是分隔拉脊山南北两侧的西宁一民和盆地和循化一化隆盆地的重要边界断裂。沿断裂带的追踪考察，发现了其新活动的部分地质地貌证据。其最新活动时代为晚更新世晚期(仅局部为全新世早期)，性质以挤压逆冲为主稍具左旋特征。该断裂的新活动可能导致了该区20余次5级左右中等地震的发生。可以说，拉脊山地区既是反映构造活动，又是反映地震活动的地震构造窗。     

2022门源MS6.9地震地表破裂带震害特征调查

2022年1月8日,青海省海北藏族自治州门源县发生M_S6.9地震,震中位于青藏高原东北缘地区祁连—海原断裂带的冷龙岭断裂和托勒山断裂构造转换区域(37.77°N,101.26°E)。震后野外现场考察结果表明,此次地震形成的同震地表破裂带总长度约为26 km,整体走向NWW向,破裂性质以左旋走滑局部逆冲为主。断层错动造成的破坏形式以雁列式组合的张裂隙、张剪裂隙、挤压鼓包、断层陡坎等为主。其中,道河至硫磺沟段地表破裂最为强烈,规模大且连续性好,造成的震害最为显著,地表破裂规模向东、西两端逐渐衰减。破裂带穿过区域内多条河流,造成显著的冰面破裂变形,并沿河岸形成一系列的边坡崩塌、滚石等地质灾害。综合破裂带及震害规模分析,宏观震中位于道河至硫磺沟地区。     

THE COMPREHENSIVE ANALYSIS AND RESEARCH OF RECENT GRAVITY AND CRUSTAL DEFORMATION IN NORTHEASTERN EDGE OF THE TIBETAN PLATEAU

In this study, we systematically analyzed the relationship between regional gravity changes, 3D crustal deformation, regional tectonic environment and strong earthquakes based on the relative gravity measurements(2011-2014), GPS data and the background vertical deformation from the leveling measurements conducted from 1970 to 2011. Subsequently, we further characterized the temporal-spatial patterns and discussed the mechanism of regional gravity changes and the crustal deformation. The results can be summarized as follows:1)The regional gravity changes, the GPS-derived horizontal deformation and the vertical deformational obtained from leveling data showed a close spatial relationship:The gravity increased along with the direction of horizontal movement, and the gravity decreased with the crustal uplift and vice versa, which reflects the inherited characteristics of neotectonic activities. 2)The crustal deformation was closely related to the active faults. The contour lines of gravity changes and vertical deformation were generally along with the Qilian-Haiyuan Fault(the strike is NWW), and the crustal horizontal deformation showed left-lateral strike slip motion near the Qilian-Haiyuan Fault. 3)The strong earthquakes usually occur in the active faults where intensive gravity change and vertical and/or horizontal deformation occurred. The extrusion deformation, surface compression rate and gravity changes were obvious near the epicenter of 2016 Menyuan earthquake. The 2013 Minxian-Zhangxian M_S6.6 earthquake occurred in the direction-turning area of intense gravity gradient zone and the transitional area of surface compression and vertical deformation. The first author of this paper has made a medium-term forecast before the Minxian and Menyuan earthquakes, especially the location of the earthquake. Based on the above understandings, we emphasized that:there are still possibilities of strong or huge earthquakes within medium-long term in the areas of crustal deformation anomalies in the study region.     

EARTHQUAKE FOCAL MECANISMS IN THE DALIANGSHAN SUB-BLOCK AND ADJACENT AREAS AND CHARACTERISTICS OF THE REGIONAL STRESS FIELD

The Daliangshan sub-block is a boundary region among the Bayan Har block, the Sichuan-Yunnan block and the South China block. It hosts four major fault systems:The southwest to south trending Xianshuihe-Zemuhe Fault zone in the west, the Longmenshan fault zone is the northern boundary, the Zhaotong-Lianfeng fault zone in the south, and the NS-trending Mabian-Yanjin fault zone in the east. This study focused on focal mechanisms and the regional stress field of the Daliangshan sub-block to help understand the earthquake preparation process, tectonic deformation and seismic stress interaction in this area. We collected broadband waveform records from the Sichuan Seismic Network and used multiple 1-D velocity models to determine the focal mechanisms of moderate and large earthquakes(M_L ≥ 3.5)in the Daliangshan sub-block by using the CAP method. Results for 276 earthquakes from Jan 2010 to Aug 2016 show that the earthquakes are dominated by strike-slip and trust faulting, very few events have normal faulting and the mixed type. We then derived the regional distribution of the stress field through a damp linear inversion(DRSSI)using the focal mechanisms obtained in this study. Inversion results for the spatial pattern of the stress field in the block suggest that the entire region is predominantly under strike-slip and trust faulting regimes, largely consistent with the focal mechanisms. The direction of maximum compression axes is NW-NWW, and part of the area is slightly rotated, which is consistent with the GPS velocity field. Combining geodynamic background, this work suggests that because the Sichuan-Yunnan block is moving to SE and the Tibetan plateau to SE-E along major strike-slip faults, the stress field of the Daliangshan sub-block and its adjacent regions is controlled jointly by the Bayan Har block, the Sichuan-Yunnan block and the South China block.     

GPS观测及断裂晚第四纪滑动速率所反映的青藏高原北部变形

断裂晚第四纪滑动速率及现今GPS观测揭示了青藏高原向北扩展与高原边缘隆升的运动特征.主要断裂晚第四纪滑动速率及跨断裂GPS应变速率的结果表明,青藏高原北部边缘的断裂以低滑动速率（＜10 mm/a）为主,特别是两条边界断裂：阿尔金断裂和海原—祁连山断裂.两条主要边界断裂上的滑动速率分布显示了断裂间滑动速率转换及调整特征.阿尔金断裂自95°E以西的8～12 mm/a稳定滑动速率,向东逐渐降低到最东端的约1～2 mm/a,而海原断裂自哈拉湖一带开始发育后滑动速率为1～2 mm/a,到祁连一带（101°E以东）增大到相对稳定的4～5 mm/a,直到过海原后转向六盘山一带,滑动速率降低到1～3 mm/a,甚至更低.滑动速率的变化及分布特征显示,阿尔金断裂滑动主要是通过祁连山内部隆起及两侧新生代盆地变形引起的缩短来吸收的,海原—祁连山断裂的低滑动速率及沿断裂运动学特征表明断裂尾端的陇西盆地变形及六盘山的隆起是断裂左旋走滑速率的主要吸收方式.这一变形特征表明,青藏高原北部边缘的变形模式是一种分布式的连续变形,变形发生自高原内部,边界断裂的走滑被高原内部变形所吸收.     

2008年于田MW7.2地震滑动分布反演及三维同震形变场解算

基于ENVISAT ASAR升降轨数据, 利用InSAR获取2008年于田M_W7.2地震同震形变场; 采用SDM反演本次地震断层滑动分布; 使用PSCMP正演获取于田M_W7.2地震南北向模拟形变量, 并结合升降轨同震形变场, 解算三维同震形变场。 同震形变场分析表明, 2008年于田M_W7.2地震以正断为主, 且带有走滑运动特征, 破裂带走向为NNE向。 同震滑动分布反演结果显示, 断层沿走向被分为4段F1、 F2、 F3、 F4, 其滑动分布集中在0~14 km区间, 以F2、 F3段为主, 最大滑动量约5.31 m, 位于F2段深部2.76 km处; 沿破裂带走向, 左旋走滑位移与垂直位移比值有增大的趋势; 反演获得的地震矩M₀=5.58×10¹⁹N·m, 相当于矩震级M_W7.1。 三维同震形变场解算结果显示, 断层上盘整体表现为沉降, 断层下盘整体表现为隆升, 且沉降量明显大于隆升量, 表明地震以正断破裂为主; 除靠近断裂带中上部表现为向东南运动外, 上盘整体上表现为向西南运动; 断层下盘则整体表现为向东北运动, 证明破裂兼有左旋走滑运动。 滑动分布反演、 正演与三维同震形变场解算结果皆表明, 于田M_W7.2地震破裂以正断为主, 且带有一定的左旋走滑。     

2022年1月8日青海门源MS6.9地震序列重定位和震源机制解研究

2022年1月8日青海省海北州门源县发生M_S6.9地震,震后产生了长约22 km的地表破裂带,青海、甘肃和宁夏等多地震感强烈。本文基于区域地震台网资料,通过多阶段定位方法对门源M_S6.9地震早期序列（2022年1月8日至12日）进行了重定位,并利用gCAP方法反演了主震和M_S≥3.4余震的震源机制和震源矩心深度,计算了现今应力场体系在门源M_S6.9地震震源机制两个节面产生的相对剪应力和正应力。结果表明:门源M_S6.9地震的初始破裂深度为7.8 km,震源矩心深度为4 km,地震序列的优势初始破裂深度主要介于7—8 km之间,而M_S≥3.4余震的震源矩心深度为3—7 km;该地震序列的震源深度剖面显示震后24个小时内的地震序列长度约为25 km,与地表破裂带的长度大体一致,整体地震序列长度约为30 km,其中1月8日M_S6.9主震和M_S5.1余震位于余震区西段,1月12日M_S5.2余震位于余震区东段。2022年1月8日门源M_S6.9主震的震源机制解节面Ⅰ为走向290°、倾角81°、滑动角16°,节面Ⅱ为走向197°、倾角74°、滑动角171°,根据余震展布的总体趋势估计断层面走向为290°,表明此次地震为近乎直立断层面上的一次左旋走滑型事件;M_S≥3.4余震的震源机制解显示这些地震主要为走滑型地震,P轴走向从余震区西段到东段之间大体呈现NE向到EW向的变化。现今应力场体系在门源M_S6.9主震震源机制解节面Ⅰ上产生的相对剪应力为0.638,而在节面Ⅱ上的相对剪应力为0.522,表明这两个节面均非构造应力场的最大释放节面,这与2016年门源M_S6.4地震逆冲型震源机制为构造应力场的最优释放节面有着明显差异。结合地质构造、震源机制和余震展布,2022年1月8日门源M_S6.9主震的发震构造可能为冷龙岭断裂西段,其地震断层错动方式为左旋走滑。根据重定位结果、震级-破裂关系以及剪应力结果,本文认为门源地区存在一定的应力积累且应力未得到充分释放,该地区仍存在发生强震的危险。      

芦山地震断层的滑动分布与汶川地震断层的关系

本文利用2013年芦山M_S7.0级地震同震GPS数据反演了芦山断层几何与断层滑动分布,结果表明:芦山地震发震断层具有南陡北缓、上陡下缓的特征,低倾角的区域位于发震断层北段且靠近映秀断层的一侧;滑动分布模型的最大滑动量为0.82m,其深度为13.67km与小震发生集中平均深度12.5km接近.我们选取1998—2014年龙门山断裂带区域地壳形变观测数据,拟合获得了龙门山断裂带走向方向上的速度分量,发现在汶川M_S8.0地震与芦山M_S7.0地震之间宽度约30km破裂空区,龙门山断裂带西南段与东北段的形变分量以破裂空区为界方向相反.断裂带东北段(汶川地震主要发震断层)的形变分量方向与断层右旋走滑运动方向一致,而在断裂带西南段(芦山地震发震断层)的形变分量方向与断层左旋走滑运动方向一致.芦山地震走滑方向与汶川地震走滑方向相反是因为该断裂带构造运动在特有几何构造下受青藏高原东南向挤压,遇龙门山中段岩石圈楔状构造的阻挡,在汶川M_S8.0地震与芦山M_S7.0地震间的地震空区,形成了构造运动向其两侧分流的结果.     

NEW DISCOVERY OF RESHUI-TAOSTUO RIVER FAULT IN DULAN,QINGHAI PROVINCE AND ITS IMPLICATIONS

The 40km-long, NEE trending Reshui-Taostuo River Fault was found in the southern Dulan-Chaka highland by recent field investigation, which is a strike-slip fault with some normal component. DEM data was generated by small unmanned aerial vehicle(UAV)on key geomorphic units with resolution<0.05m. Based on the interpretation and field investigation, we get two conclusions:1)It is the first time to define the Reshui-Taostuo River Fault, and the fault is 40km long with a 6km-long surface rupture; 2)There are left-handed dislocations in the gullies and terraces cut by the fault. On the high-resolution DEM image obtained by UAV, the offsets are(9.3±0.5) m, (17.9±1.5) m, and(36.8±2) m, measured by topographic profile recovery of gullies. The recovery measurements of two terraces present that the horizontal offset of T₁/T₀ is(18.2±1.5) m and the T₂/T₁ is (35.8±2) m, which is consistent with the offsets from gullies. According to the historical earthquake records, a M5 3/4 earthquake on April 10, 1938 and a M_S5.0 earthquake on March 21, 1952 occurred at the eastern end of the surface rupture, which may be related to the activity of the fault. By checking the county records of Dulan and other relevant data, we find that there are no literature records about the two earthquakes, which is possibly due to the far distance to the epicenter at that time, the scarcity of population in Dulan, or that the earthquake occurred too long ago that led to losing its records. The southernmost ends of the Eastern Kunlun Fault and the Elashan Fault converge to form a wedge-shaped extruded fault block toward the northwest. The Dulan Basin, located at the end of the wedge-shaped fault block, is affected by regional NE and SW principal compressive stress and the shear stress of the two boundary faults. The Dulan Basin experienced a complex deformation process of compression accompanying with extension. In the process of extrusion, the specific form of extension is the strike-slip faults at each side of the wedge, and there is indeed a north-east and south-west compression between the two controlling wedge-shaped fault block boundary faults, the Eastern Kunlun and Elashan Faults. The inferred mechanism of triangular wedge extrusion deformation in this area is quite different from the pure rigid extrusion model. Therefore, Dulan Basin is a wedge-shaped block sandwiched between the two large-scale strike-slip faults. Due to the compression of the northeast and southwest directions of the region, the peripheral faults of the Dulan Basin form a series of southeast converging plume thrust faults on the northeast edge of the basin near the Elashan Fault, which are parallel to the Elashan Fault in morphology and may converge with the Elashan Fault in subsurface. The southern marginal fault of the Dulan Basin(Reshui-Taostuo River Fault)near the Eastern Kunlun fault zone is jointly affected by the left-lateral strike-slip Eastern Kunlun Fault and the right-lateral strike-slip Elashan Fault, presenting a left-lateral strike-slip characteristic. Meanwhile, the wedge-shaped fault block extrudes to the northwest, causing local extension at the southeast end, and the fault shows the extensional deformation. These faults absorb or transform the shear stress in the northeastern margin of the Tibet Plateau. Therefore, our discovery of the Dulan Reshui-Taostuo River Fault provides important constraints for better understanding of the internal deformation mode and mechanism of the fault block in the northeastern Tibetan plateau. The strike of Reshui-Taostuo River Fault is different from the southern marginal fault of the Qaidam Basin. The Qaidam south marginal burial fault is the boundary fault between the Qaidam Basin and the East Kunlun structural belt, with a total length of ~500km. The geophysical data show that Qaidam south marginal burial fault forms at the boundary between the positive gravity anomaly of the southern East Kunlun structural belt and the negative gravity anomaly gradient zone of the northern Qaidam Basin, showing as a thrust fault towards the basin. The western segment of the fault was active at late Pleistocene, and the eastern segment near Dulan County was active at early-middle Pleistocene. The Reshui-Taostuo River Fault is characterized by sinistral strike-slip with a normal component. The field evidence indicates that the latest active period of this fault was Holocene, with a total length of only 40km. Neither remote sensing image interpretation nor field investigation indicate the fault extends further westward and intersects with the Qaidam south marginal burial fault. Moreover, it shows that its strike is relatively consistent with the East Kunlun fault zone in spatial distribution and has a certain angle with the burial fault in the southern margin of Qaidam Basin. Therefore, there is no structural connection between the Reshui-Taostuo River Fault and the Qaidam south marginal burial fault.     

2022年1月8日青海门源MS6.9地震深部构造背景浅析

2022年1月8日青海境内的托莱山—冷龙岭断裂附近发生了门源M_S6.9地震。结合地壳厚度、速度结构及各向异性等资料探讨了门源地震的深部构造特征,揭示了门源地震的发震位置与地壳结构变化的密切关联。结果显示:门源M_S6.9地震发生在地壳厚度和v_P/v_S值都出现快速空间变化的区域;大约在10—20 km深度范围内,震源位于P波速度从浅到深由高速变低速的垂向过渡区,同时也是S波速度和泊松比分布呈现明显横向变化的过渡区域,震源下方存在明显的低速区;冷龙岭断裂两侧相速度的方位各向异性变化比较明显。1月12日的M_S5.2余震震中紧邻2016年M_S6.4地震震中,揭示出2022年门源M_S6.9地震及其余震活动导致了冷龙岭断裂比较充分的破裂,两次门源地震主震之间及邻区短时间内难以积累更大能量,因而短时间内发生更大地震的可能性不大。青藏高原东北缘的持续向北扩展所导致的地表隆升和地壳增厚是该地区强震频发的主要构造成因。