Ketoprofen-loaded Eudragit RSPO microspheres: An influence of sodium carbonate on in vitro drug release and surface topology

Eudragit RSPO microspheres containing ketoprofen as model drug, prepared by solvent evaporation technique using acetone-liquid paraffin (heavy) solvent system were examined. Depending upon polymer concentration in the internal phase, microspheres of particle mean diameter (122.8, 213.6 and 309.5 μm) were obtained. The influence of surface washing of microspheres with n-hexane, i.e. untreated microspheres (UM) on the drug content, drug release and surface topology of microspheres were compared to those of microspheres washed with sodium carbonate, i.e. treated microspheres (TM) in order to make the non-encapsulated surface drug soluble. The significant reduction in encapsulation efficiency (p < 0.001) and drug content (p < 0.001) after treatment, in combination with the small crystalline peaks observed during XRD testing and lack of melting endotherm observed in DSC testing, suggests that the washing process actually removes a significant amount of drug (p < 0.001) from the surface and encapsulated near to the surface of the microsphere polymer matrix. Scanning electron microscopy (SEM) examination revealed that the removal of surface drug did not affect the size of microspheres but the topology of treated smallest microspheres was modified. The ketoprofen release profiles were examined in phosphate buffer pH 7.4, using USPXXIII paddle type dissolution apparatus. In general both UM and TM result in biphasic release patterns, but the initial burst effect (first release phase) of TM was lower than that of UM. The second release phase did not change for the bigger size but increased for the smallest microspheres, probably owing to the modification of matrix porosity     

Ketoprofen-loaded Eudragit RSPO microspheres: an influence of sodium carbonate on in vitro drug release and surface topology

Eudragit RSPO microspheres containing ketoprofen as model drug, prepared by solvent evaporation technique using acetone-liquid paraffin (heavy) solvent system were examined. Depending upon polymer concentration in the internal phase, microspheres of particle mean diameter (122.8, 213.6 and 309.5 μm) were obtained. The influence of surface washing of microspheres with n-hexane, i.e. untreated microspheres (UM) on the drug content, drug release and surface topology of microspheres were compared to those of microspheres washed with sodium carbonate, i.e. treated microspheres (TM) in order to make the non-encapsulated surface drug soluble. The significant reduction in encapsulation efficiency (p < 0.001) and drug content (p < 0.001) after treatment, in combination with the small crystalline peaks observed during XRD testing and lack of melting endotherm observed in DSC testing, suggests that the washing process actually removes a significant amount of drug (p < 0.001) from the surface and encapsulated near to the surface of the microsphere polymer matrix. Scanning electron microscopy (SEM) examination revealed that the removal of surface drug did not affect the size of microspheres but the topology of treated smallest microspheres was modified. The ketoprofen release profiles were examined in phosphate buffer pH 7.4, using USPXXIII paddle type dissolution apparatus. In general both UM and TM result in biphasic release patterns, but the initial burst effect (first release phase) of TM was lower than that of UM. The second release phase did not change for the bigger size but increased for the smallest microspheres, probably owing to the modification of matrix porosity.     

Preparation and in vitro evaluation of slow release ketoprofen microcapsules formulated into tablets and capsules

Abstract

Ketoprofen powder was encapsulated with Eudragit RL/RS polymer solutions in isopropanol-acetone 1:1, using a simple and rapid method. Microcapsules were prepared using Eudragit solutions with different RL/RS ratios. The encapsulation process produces free-flowing microcapsules with good drug content and marked decrease in dissolution rate. The retardation in release profile of ketoprofen from microcapsules was a function of the polymer ratio employed in the encapsulation process. In vitro release of ketoprofen from microcapsules either filled in gelatin capsules or compressed into tablets, using calcium sulphate as diluent, confirmed the efficiency of the encapsulation process for preparing prolonged release medication. A capsule formulation with optimum sustained-release profile was suggested.     

Effects of the rate of solvent evaporation on the characteristics of drug loaded PLLA and PDLLA microspheres

We investigated the effects of the rate of solvent removal by varying ambient pressure at a fixed temperature on the morphology, particle sizes, drug encapsulation efficiency and releases pattern of lidocaine loaded poly-L-lactatide (PLLA) and poly-D,L-lactatide (PDLLA) microspheres, prepared with O/W emulsion-solvent evaporation process. Prepared in the fast rate of solvent evaporation (FRSE) process by reducing ambient pressure, smoothly morphological surface of drug loaded PLLA and PDLLA microspheres was observed. While in the normal rate of solvent evaporation (NRSE) process, roughness or pinhole surface was only found at drug loaded PLLA microspheres. Fabricated in the FRSE process, both PLLA and PDLLA microspheres showed smaller particle sizes and lower drug encapsulation efficiencies than those prepared in NRSE process. In regard to two materials, PLLA microspheres had higher drug encapsulation efficiencies than PDLLA ones for both processes. Although initial burst releases of drug were observed for both PLLA and PDLLA microspheres prepared in whatever solvent removal process, drug release for PLLA microspheres was slightly less than that for PDLLA ones in the earlier stage of drug release. However, in the subsequent stage of drug release, there was no difference between two materials. In corporation with different crystalline characteristics of PLA polymer and its derivatives, FRSE process by reducing ambient pressure could be further applied to produce different characteristics of microspheres for drug delivery.     

Chitosan microspheres of aceclofenac: In vitro and in vivo evaluation

The objective of this investigation was to achieve controlled drug release of Aceclofenac (ACE) microspheres and to minimize local side-effects in the gastrointestinal tract (GIT). Sustained release chitosan microspheres containing ACE were prepared using double-emulsion solvent evaporation method (O/W/O). Chitosan microspheres were prepared by varying drug to polymer ratio (1:3, 1:4, 1:5 and 1:6). Microspheres were characterized for morphology, swelling behavior, mucoadhesive properties, FTIR and DSC study, drug loading efficiency, in vitro release, release kinetics, and in vivo study was performed on rat model. ACE-loaded microspheres were successfully prepared having production yield, 57–70% w/w. Drug encapsulation efficiency was ranging from 53–72% w/w, Scanning electron microscopy (SEM) revealed particle size of microspheres was between 39 and 55 μm. FTIR spectra and DSC thermograms demonstrated no interaction between drug and polymer. The in vitro release profiles of drug from chitosan microspheres showed sustained-release pattern of the drug in phosphate buffer, pH 6.8. In vitro release data showed correlation (r² > 0.98), good fit with Higuchi/Korsmeyer-Peppas models, and exhibited Fickian diffusion. ACE microspheres demonstrated controlled delivery of aceclofenac and apparently, no G.I.T. erosion was noticed.     

Development of gelatin microspheres loaded with diclofenac sodium for intra-articular administration

We have previously reported on the targeting of diclofenac sodium in joint inflammation using gelatin magnetic microspheres. To overcome complications in the administration of magnetic microspheres and achieve higher targeting efficiency, the present work focuses on the formulation of gelatin microspheres for intra-articular administration. Drug-loaded microspheres were prepared by the emulsification/cross-linking method, characterized by drug loading, size distribution, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), gas chromatography, and in vitro release studies. The targeting efficiency of microspheres was studied in vivo in rabbits. The microspheres showed drug loading of 9.8, 18.3, and 26.7% w/w with an average size range of 37–46 µm, depending upon the drug–polymer ratio. They were spherical in nature and free from surface drug as evidenced by the SEM photographs. FT-IR, DSC, and XRD revealed the absence of drug–polymer interaction and amorphous nature of entrapped drug. Gas chromatography confirms the absences of residual glutaraldehyde. The formulated microspheres could prolong the drug release up to 30 days in vitro. About 81.2 and 43.7% of administered drug in the microspheres were recovered from the target joint after 1 and 7 days of postintra-articular injection, respectively, revealing good targeting efficiency.     

不同PLGA型号对奥曲肽微球的包封率和体外释放行为的影响

考察了不同型号聚乳酸-羟基乙酸共聚物(PLGA)作为水溶性药物奥曲肽微球载体对载药量、包封率和体外释放行为的影响.结果表明,PLGA中丙交酯含量降低,载药量和包封率降低,而突释量增大.PLGA型号相同时,黏度较大的PLGA微球载药量和包封率较高,突释量较小.采用PLGA与聚乳酸(PLA)混合材料制备的微球比单用PLGA材料微球的突释量小、载药量和包封率高、缓释效果好.     

Positively Charged Gelatin Microspheres as Gastric Mucoadhesive Drug Delivery System for Eradication of H. pylori

Gastric mucoadhesive drug delivery systems are very promising for eradication of Helicobacter pylori (H. pylori), a spiral bacterium that resides in the gastric mucus layer and at the mucus- epithelial cell interface. New positively charged biodegradable microspheres were prepared using aminated gelatin by surfactantfree emulsification in olive oil, followed by a cross-linking reaction with glutaraldehyde. The amino group contents of the modified gelatin and the microspheres were determined using a 2,4,6-trinitrobenzenesulfonic acid method. With the increase of glutaraldehyde concentration, the amino group content of the microspheres decreased accordingly. The influence of glutaraldehyde concentration, cross-linking reaction time, drug-loading patterns, and type of release media on the in vitro release characteristics of amoxicillin from the microspheres was investigated. Amoxicillin release rate from the modified gelatin microspheres was significantly reduced compared with that from gelatin microspheres. Furthermore, the release was decreased with the increase of glutaraldehyde concentration and/or cross-linking time. On the other hand, a faster release was observed in a lower pH release medium and/or using a lower pH solution for amoxicillin loading. The gastric mucoadhesive properties of the microspheres were evaluated using RITC-labeled microspheres in an isolated rat stomach. The gastric mucoadhesion of the modified gelatin microspheres was markedly improved compared with that of gelatin microspheres. The modified gelatin microsphere proves to be a possible candidate delivery system for the effective eradication of H. pylori.     

Formulation factors in preparing BTM-chitosan microspheres by spray drying method

Chitosan (CTS) microspheres were prepared by a spray drying method using type-A gelatin and ethylene oxide-propylene oxide block copolymer as modifiers. Surface morphological characteristics and surface charges of prepared microspheres were investigated by using scanning electron microscopy (SEM) and microelectrophoresis. The particle shape, size and surface morphology of microspheres were significantly affected by the concentration of gelatin. Betamethasone disodium phosphate (BTM)-loaded microspheres demonstrated good drug stability (less 1% hydrolysis product), high entrapped efficiency (95%) and positive surface charge (37.5 mV). The in vitro drug release from the microspheres was related to gelatin content. Microspheres containing gelatin/CTS 0.4 approximately 0.6(w/w) had a prolong release pattern for 12 h. These formulation factors were correlated to particulate characteristics for optimizing BTM microspheres in pulmonary delivery.     

Novel PLA modification of organic microcontainers based on ring opening polymerization: synthesis, characterization, biocompatibility and drug loading/release properties

In the current study, poly lactic acid (PLA) modified hollow crosslinked poly(hydroxyethyl methacrylate) (PHEMA) microspheres have been prepared, in order to obtain a stimulus-responsive, biocompatible carrier with sustained drug release properties. The synthetical process consisted of the preparation of poly(methacrylic acid)@poly(hydroxyethyl methacrylate-co-N,N'-methylene bis(acrylamide)) microspheres by a two stage distillation-precipitation polymerization technique using 2,2'-azobisisobutyronitrile as initiator. Following core removal, a PLA coating of the microspheres was formed, after ring opening polymerization of DL-lactide, attributing the initiator's role to the active hydroxyl groups of PHEMA. The anticancer drug daunorubicin (DNR) was selected for the study of loading and release behavior of the coated microspheres. The loading capacity of the PLA modified microspheres was found to be four times higher than that of the parent ones (16% compared to 4%). This coated microspherical carrier exhibited a moderate pH responsive drug release behavior due to the pH dependent water uptake of PHEMA, and PLA hydrolysis. The in vitro cytotoxicity of both the parent and the DNR-loaded or empty modified hollow microspheres has been also examined on MCF-7 breast cancer cells. The results showed that although the empty microspheres were moderately cytotoxic, the DNR-loaded microspheres had more potent anti-tumor effect than the free drug. Therefore, the prepared coated microspheres are interesting drug delivery systems.     

Evaluation of ketorolac tromethamine microspheres by chitosan/gelatin B complex coacervation

Microspheres (MS) of Ketorolac Tromethamine (KT) for oral delivery were prepared by complex coacervation (method-1) and simple coacervation (method-2) methods without the use of chemical crossalinking agent (glutaraldehyde) to avoid the toxic reactions and other undesirable effects of the chemical cross-linking agents. Alternatively, ionotropic gelation was employed by using sodium-tripolyphosphate (Na-TPP) as cross linking agent. Chitosan and gelatin B were used as polymer and copolymer respectively. All the prepared microspheres were subjected to various physico-chemical studies, such as drug-polymer compatibility by Thin Layer Chromatography (TLC) and Fourier Transform Infra Red Spectroscopy (FTIR), surface morphology by Scanning Electron Microscopy (SEM), frequency distribution, encapsulation efficiency, in-vitro drug release characteristics and release kinetics. The physical state of drug in the microspheres was determined by Differential Scanning Calorimetry (DSC) and X-ray powder Diffractometry (XRD). TLC and FTIR studies indicated no drug-polymer incompatibility. All the MS showed release of drug by a fickian diffusion mechanism. DSC and XRD analysis indicated that the KT trapped in the microspheres existed in an amorphous or disordered-crystalline status in the polymer matrix. It is possible to design a controlled drug delivery system for the prolonged release of KT, improving therapy by possible reduction of time intervals between administrations.     

Poly(hydroxybutyrate-hydroxyvalerate) microspheres containing progesterone: preparation, morphology and release properties.

The biodegradable polyesters, poly(hydroxybutyrate) (PHB) and poly(hydroxybutyrate-hydroxyvalerate) (PHBV) were investigated for use as sustained delivery carriers of a model drug, progesterone. Spherical microspheres containing the drug were prepared by an emulsion solvent-evaporation method with gelatin as an emulsifier. Methylene chloride as the polymer solvent yielded smoother microspheres than chloroform. The surface texture was also dependent upon the temperature of the preparation and polymer used. Surface crystals were observed when the drug loading was increased beyond 5 per cent w/w. Thermograms of the microspheres did not show an endotherm corresponding to the melting of the drug because the drug dissolved in the melted polymer while heating. The amount of residual solvent in the microspheres (gas chromatographic assay) ranged from 3.4 to 58.4 ppm and was dependent on the processing temperature, concentration of the polymer in the solvent and the polymer composition. In vitro release of the drug was slowest from microspheres made from copolymer containing 9 per cent hydroxyvalerate. A less porous microsphere matrix was formed by this copolymer.     

糖类交联明胶微球的制备及其释药特性研究

目的:以生物相容性的糖作交联剂制备明胶药物载体并研究其释药特性。方法:用葡萄糖、葡聚糖、氧化葡萄糖、氧化葡聚糖作交联剂制备明胶盘和微球,测定其溶胀动力学,分别以阿司匹林和牛血清白蛋白为药物模型,紫外分光光度法测定药物包裹率、载药率,并检测明胶微球在模拟体内条件下药物的释放速率。结果:葡萄糖、氧化葡萄糖、葡聚糖、氧化葡聚糖作交联剂制备的凝胶溶胀率分别为204%、246%、166%、233%;4种阿司匹林和牛血清白蛋白明胶微球平均载药率分别为8.73%和4.05%,平均包封率分别为62.55%和31.40%;2h药物释放百分率依次为30%、14%、76%、73%和97.2%、86.6%、60.8%、50.1%。结论:上述4种糖均可以取代化学交联剂制备明胶微球;天然糖交联微球缓释效果优于氧化糖。     

Preparation and characterization of gelatin surface modified PLGA microspheres

This study optimized conditions for preparing and characterizing gelatin surface modified poly (lactic-co-glycolic acid) (PLGA) copolymer microspheres and determined this systems interaction with fibronectin. Some gelatin microspheres have an affinity for fibronectin-bearing surfaces; these miscrospheres exploit the interaction between gelatin and fibronectin. PLGA copolymer microspheres were selected because they have reproducible and slowrelease characteristics in vivo. The PLGA microspheres were surface modified with gelatin to impart fibronectin recognition. Dexamethasone was incorporated into these microspheres because dexamethasone is beneficial in chronic human diseases associated with extra fibronectin expression (eg, cardiovascular disease, inflammatory disorders, rheumatoid arthritis). The gelatin surface modified PLGA microspheres (prepared by adsorption, conjugation, and spray coating) were investigated and characterized by encapsulation efficiency, particle size, in vitro release, and affinity for fibronectin. The gelatincoated PLGA microspheres had higher interaction with fibronectin compared with the other gelatin surface modified PLGA microspheres (adsorption and conjugation). Dexamethasone was released slowly (over 21 days) from gelatin surface modified PLGA microspheres.     

Formulation,development, and performance evaluation of metoclopramide HCl oro-dispersible sustained release tablet

The present study was undertaken to develop and evaluate an oro-dispersible, sustained release tablet of metoclopramide HCl. The technology was comprised of developing sustained release microparticles, and compression of resultant microspheres into a fast dispersible tablet by direct compression. The microspheres of metoclopramide HCl were prepared by an emulsification-solvent evaporation method using ethylcellulose as the matrix polymer. The prepared microspheres were evaluated for morphology, particle size, entrapment efficiency, and in vitro drug release characteristics. Scanning electron microscopy demonstrated spherical particles with a mean diameter of 81.27 ± 5.87 μm and the drug encapsulation efficiency was found to be 70.15 ± 3.06%. The process and formulation variables such as rotation speed, polymer concentration, and drug concentration influenced the drug encapsulation efficiency and in vitro drug release. Optimized microspheres were compressed into tablets which were comprised of metoclopramide HCl microspheres, 53% (w/v) of D-mannitol granules, 7% (w/w) of Polyplasdone XL 10, and 0.5% (w/w) of calcium stearate. The tablets demonstrated a hardness of 59 ± 3 N, friability of 0.21% and disintegration time of 27 ± 3 sec. The formulations were subjected to stability studies as per ICH guidelines and were found to be stable after a 6 month study. In vivo experiments conducted in rats demonstrated that a constant level of metoclopramide HCl in plasma could be maintained for up to 20 h at a suitable concentration for antiemetic activity. An appropriate combination of excipients made it possible to obtain orally disintegrating sustained release tablets of metoclopramide HCl using simple and conventional techniques.     

Preparation of PEG-grafted immunomagnetoliposomes entrapping citrate stabilized magnetite particles and their application in CD34+ cell sorting

Abstract

Novel polylactide (PLA) microspheres endowed with hydrophilic and bioadhesive surfaces as injectable formulations for the controlled release of fenretinide were prepared, using a novel technique based on the co-precipitation of PLA with gelatin, at the interface of a liquid dispersion formed by the addition of N-methylpyrrolidone containing PLA and dextrin (DX), towards an aqueous solution of gelatin (G). The resulting PLA–G–DX microspheres were compared with others prepared by the same technique using polylactide-co-glycolide (PLGA), with or without DX, and with or without phosphatidylcholine. Of the different systems, the PLA–G–DX microspheres had the best morphological, dimensional and functional characteristics. They had the highest drug loading, and their drug release was the most efficient over time without any burst effect. Their in vitro anti-tumoural activity was strongly enhanced with respect to the pure fenretinide. This paralleled the increased drug concentration inside the cells due to their marked bioadhesion to the tumour cell membranes as indicated by scanning electron microscope images.     

Development and in vitro evaluations of gelatin A microspheres of ketorolac tromethamine for intranasal administration

Gelatin A microspheres (MS) of ketorolac tromethamine (KT) for intranasal systemic delivery were developed with the aim to avoid gastro-intestinal complications, to improve patient compliance, to use as an alternative therapy to conventional dosage forms, to achieve controlled blood level profiles, and to obtain improved therapeutic efficacy in the treatment of postoperative pain and migraine. Gelatin A microspheres were prepared using the emulsification-crosslinking technique. The drug was dispersed in polymer gelatin and formulated into a w/o emulsion with liquid paraffin, using glutaraldehyde as a crosslinking agent. The formulation variables were drug loading and the concentrations of polymer (gelatin), co-polymer (chitosan) and the crosslinking agent. All the prepared microspheres were evaluated for physical characteristics, such as particle size, incorporation efficiency, swelling ability, in vitro bioadhesion on rabbit small intestine and in vitro drug release characteristics in pH 6.6 phosphate buffer. All the microspheres showed good bioadhesive properties. Gelatin A and chitosan concentrations, percentage of the crosslinking agent and also the drug loading affected significantly the rate and extent of drug release. The data indicated that the KT release followed Higuchi's matrix model.     

Targeted delivery of diclofenac sodium via gelatin magnetic microspheres formulated for intra-arterial administration

In the present work, we have attempted to deliver diclofenac sodium to a target site by intra-arterial injection of gelatin magnetic microspheres and subsequent localization using an external magnet. Drug-loaded magnetic microspheres were prepared by emulsification/cross-linking method, characterized by drug loading, magnetite content, size distribution, optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) analysis, differential scanning calorimetry (DSC), X-ray diffraction (XRD), absence of glutaraldehyde by gas chromatography, and in vitro release studies. The targeting efficiency and the therapeutic efficacy of microspheres were studied in vivo in rabbits. The microspheres showed drug loading of 9.1, 18.7, 24.9% w/w, magnetite content of 27.8–28.9% w/w with an average size range of 25–30.6 μm, depending upon the drug–polymer ratio. They were spherical in nature as evidenced by optical microscopy and SEM. FT-IR, DSC, and XRD studies revealed the absence of drug–polymer interaction. Gas chromatography confirmed the absence of residual glutaraldehyde. The microspheres were able to prolong the drug release over 24–30 days and the application of sonication during in vitro release study has slightly increased the release rate. After intra-arterial administration of microspheres, 77.7% of injected dose was recovered at the target site which revealed good targeting efficiency. The microspheres effectively reduced joint swelling, but lesser extent than the oral diclofenac sodium in high dose, in antigen induced arthritic rabbits without producing gastric ulceration which was observed in rabbits treated with oral diclofenac sodium.     

Development of interferon alpha-2b microspheres with constant release

Interferon alpha-2b (IFNα-2b) is an important immune regulator used widely in clinic. However, frequent subcutaneous injection and substantial toxicity decrease patients' compliance. So, drug delivery with more precisely controlled drug release is urgent for IFNα-2b. Microsphere is a promising sustained drug delivery system, which has been studied widely for delivery of proteins. However, it was found difficult to keep proteins' activity and guarantee complete release. In this study, we solidified IFNα-2b as microparticles firstly by co-lyophilizing it with gelatin and ZnSO(4). Microspheres were then prepared. The preparing procedure and formulation were optimized with encapsulation efficiency and in vitro release as main parameters. Finally, the microspheres were prepared by S/O/W method with microparticle size about 5 μm and PEGT/PBT-PLGA (9:1, w/w) as matrix material. The diameter of microspheres was 28.94 μm, the encapsulation efficiency was 86.01%, the burst release was 16.69%, the cumulative release was 83.06% at 23th day, and IFNα-2b was released from microspheres with a zero-order profile. These microspheres also demonstrated sustained and steady release for about 13 days in rats. In conclusion, the procedure and formulation used in this study were supposed to be successful to keep IFNα-2b active and released constantly and completely.     

Effects of formulation parameters on encapsulation efficiency and release behavior of thienorphine loaded PLGA microspheres

To develop a long-acting injectable thienorphine biodegradable poly (d, l-lactide-co-glycolide) (PLGA) microsphere for the therapy of opioid addiction, the effects of formulation parameters on encapsulation efficiency and release behavior were studied. The thienorphine loaded PLGA microspheres were prepared by o/w solvent evaporation method and characterized by HPLC, SEM, laser particle size analysis, residual solvent content and sterility testing. The microspheres were sterilized by gamma irradiation (2.5 kGy). The results indicated that the morphology of the thienorphine PLGA microspheres presented a spherical shape with smooth surface, the particle size was distributed from 30.19?±?1.17 to 59.15?±?0.67μm and the drug encapsulation efficiency was influenced by drug/polymer ratio, homogeneous rotation speed, PVA concentration in the water phase and the polymer concentration in the oil phase. These changes were also reflected in drug release. The plasma drug concentration vs. time profiles were relatively smooth for about 25 days after injection of the thienorphine loaded PLGA microspheres to beagle dogs. In vitro and in vivo correlation was established.