Synthesis of 18F‐labelled biphenyls via SUZUKI cross‐coupling with 4‐[18F]fluoroiodobenzene

The SUZUKI reaction of organoboron compounds with 4‐[¹⁸F]fluoroiodobenzene has been developed as a novel radiolabelling technique in ¹⁸F chemistry. The cross‐coupling reaction of p‐tolylboronic acid with 4‐[¹⁸F]fluoroiodobenzene was used to screen different palladium complexes, bases and solvents. Optimized reaction conditions (Pd₂(dba)₃, Cs₂CO₃, acetonitrile, 60°C for 5 min) were further applied to the synthesis of various ¹⁸F‐labelled biphenyls bearing different functional groups. The reaction proceeded in excellent radiochemical yields of up to 94% within 5 min while showing good compatibility to many functional groups. Copyright © 2006 John Wiley & Sons, Ltd.     

No‐carrier added synthesis of 18F‐labelled nucleosides using Stille cross‐coupling reactions with 4‐[18F]fluoroiodobenzene

The radiosyntheses of 5‐(4′‐[¹⁸F]fluorophenyl)‐uridine [¹⁸F]‐11 and 5‐(4′‐[¹⁸F]fluorophenyl)‐2′‐deoxy‐uridine [¹⁸F]‐12 are described. The 5‐(4′‐[¹⁸F]fluoro‐phenyl)‐substituted nucleosides were prepared via a Stille cross‐coupling reaction with 4‐[¹⁸F]fluoroiodobenzene followed by basic hydrolysis using 1 M potassium hy‐droxide. The Stille cross‐coupling reaction was optimized by screening various palladium complexes, additives and solvents. By using optimized labelling conditions (Pd₂(dba)₃/CuI/AsPh₃ in DMF/dioxane (1:1), 20 min at 65°C), 550 MBq of [4‐¹⁸F]fluoroiodobenzene could be converted into 120 MBq (33%, decay‐corrected) of 5‐(4′‐[¹⁸F]fluorophenyl)‐2′‐deoxy‐uridine [¹⁸F]‐12 within 40 min, including HPLC purification. Copyright © 2004 John Wiley & Sons, Ltd.     

N‐heterocyclic carbenes as ligands in palladium‐mediated [11C]radiolabelling of [11C]amides for positron emission tomography

A model palladium‐mediated carbonylation reaction synthesizing N‐benzylbenzamide from iodobenzene and benzylamine was used to investigate the potential of four N‐heterocyclic carbenes (N,N′‐bis(diisopropylphenyl)‐4,5‐dihydroimidazolinium chloride ( I ), N,N′‐bis(1‐mesityl)‐4,5‐dihydroimidazolinium chloride ( II ), N,N′‐bis(1‐mesityl)imidazolium chloride ( III ) and N,N′‐bis(1‐adamantyl)imidazolium chloride ( IV )) to act as supporting ligands in combination with Pd₂(dba)₃. Their activities were compared with other Pd‐diphosphine complexes after reaction times of 10 and 120 min. Pd₂(dba)₃ and III were the best performing after 10 min reaction (20%) and was used to synthesize radiolabelled [¹¹C]N‐benzylbenzamide in good radiochemical yield (55%) and excellent radiochemical purity (99%). A Cu(Tp*) complex was used to trap the typically unreactive and insoluble [¹¹C]CO which was then released and reacted via the Pd‐mediated carbonylation process. Potentially useful side products [¹¹C]N,N′‐dibenzylurea and [¹¹C]benzoic acid were also observed. Increased amounts of [¹¹C]N,N′‐dibenzylurea were yielded when PdCl₂ was the Pd precursor. Reduced yields of [¹¹C]benzoic acid and therefore improved RCP were seen for III /Pd₂(dba)₃ over commonly used dppp/Pd₂(dba)₃ making it more favourable in this case. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of 4‐[18F]fluoroiodobenzene and its application in sonogashira cross‐coupling reactions

The first application of a Sonogashira cross‐coupling reaction in ¹⁸F chemistry has been developed. The reaction was exemplified by the cross‐coupling of terminal alkynes (ethynylcyclopentyl carbinol 6 , 17α‐ethynyl‐3,17β‐estradiol 7 and 17α‐ethynyl‐3‐methoxy‐3,17β‐estradiol 8 ) with 4‐[¹⁸F]fluoroiodobenzene. 4,4′‐Diiododiaryliodonium salts were used as precursors for the synthesis of 4‐[¹⁸F]fluoroiodobenzene, enabling the convenient access to 4‐[¹⁸F]fluoroiodobenzene in 13–70% yield using conventional heating or microwave activation. The Sonogashira cross‐coupling of 4‐[¹⁸F]fluoroiodobenzene with terminal alkynes gave the corresponding 4‐[¹⁸F]fluorophenylethynyl‐substituted compounds [¹⁸F]‐9 , [¹⁸F]‐10 and [¹⁸F]‐13 in yields up to 88% within 20 min of starting from 4‐[¹⁸F]fluoroiodobenzene. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of N‐(3‐[18F]Fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([18F]FP‐β‐CIT)

N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([¹⁸F]FP‐β‐CIT) was synthesized in a two‐step reaction sequence. In the first reaction, 1‐bromo‐3‐(nitrobenzene‐4‐sulfonyloxy)‐propane was fluorinated with no‐carrier‐added fluorine‐18. The resulting product, 1‐bromo‐3‐[¹⁸F]‐fluoropropane, was distilled into a cooled reaction vessel containing 2β‐carbomethoxy‐3β‐(4‐iodophenyl)‐nortropane, diisopropylethylamine and potassium iodide. After 30 min, the reaction mixture was subjected to a preparative HPLC purification. The product, [¹⁸F]FP‐β‐CIT, was isolated from the HPLC eluent with solid‐phase extraction and formulated to yield an isotonic, pyrogen‐free and sterile solution of [¹⁸F]FP‐β‐CIT. The overall decay‐corrected radiochemical yield was 25 ± 5%. Radiochemical purity was > 98% and the specific activity was 94 ± 50 GBq/µmol at the end of synthesis. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [18F] 4‐amino‐N‐(3‐chloro‐4‐fluorophenyl)‐N′‐hydroxy‐1,2,5‐oxadiazole‐3‐carboximidamide (IDO5L): a novel potential PET probe for imaging of IDO1 expression

To synthesize ¹⁸F‐labeled positron emission tomography (PET) ligands, reliable labeling techniques inserting ¹⁸F into a target molecule are necessary. The ¹⁸F‐fluorobenzene moiety has been widely utilized in the synthesis of ¹⁸F‐labeled compounds. The present study utilized [¹⁸F]‐labeled aniline as intermediate in [¹⁸F]‐radiolabeling chemistry for the facile radiosynthesis of 4‐amino‐N‐(3‐chloro‐4‐fluorophenyl)‐N′‐hydroxy‐1,2,5‐oxadiazole‐3‐carboximidamide ([¹⁸F]IDO5L) as indoleamine 2,3‐dioxygenase 1 (IDO1) targeted tracer. IDO5L is a highly potent inhibitor of IDO1 with low nanomolar IC₅₀. [¹⁸F]IDO5L was synthesized via coupling [¹⁸F]3‐chloro‐4‐fluoroaniline with carboximidamidoyl chloride as a potential PET probe for imaging IDO1 expression. Under the optimized labeling conditions, chemically and radiochemically pure (>98%) [¹⁸F]IDO5L was obtained with specific radioactivity ranging from 11 to 15 GBq/µmol at the end of synthesis within ~90 min, and the decay‐corrected radiochemical yield was 18.2 ± 2.1% (n = 4).     

Synthesis of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[Methyl‐11C]thymine ([11C]FMAU) via a Stille cross‐coupling reaction with [11C]methyl iodide

1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[methyl‐¹¹C]thymine ([¹¹C]FMAU) [¹¹C]‐ 1 was synthesised via a palladium‐mediated Stille coupling reaction of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐5‐(trimethylstannyl)uracil 2 with [¹¹C]methyl iodide in a one‐pot procedure. The reaction conditions were optimized by screening various catalysts and solvents, and by altering concentrations and reaction temperatures. The highest yield was obtained using Pd₂(dba)₃ and P(o‐tolyl)₃ in DMF at 130°C for 5 min. Under these conditions the title compound [¹¹C]‐ 1 was obtained in 28±5% decay‐corrected radiochemical yield calculated from [¹¹C]methyl iodide (number of experiments=7). The radiochemical purity was >99% and the specific radioactivity was 0.1 GBq/μmol at 25 min after end of bombardment. In a typical experiment 700–800 MBq of [¹¹C]FMAU [¹¹C]‐ 1 was obtained starting from 6–7 GBq of [¹¹C]methyl iodide. A mixed ¹¹C/¹³C synthesis to yield [¹¹C]‐ 1 /(¹³C)‐ 1 followed by ¹³C‐NMR analysis was used to confirm the labelling position. The labelling procedure was found to be suitable for automation. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and evaluation of a 18F‐labeled 4‐phenylpiperidine‐4‐carbonitrile radioligand for σ1 receptor imaging

We report the design and synthesis of several 4‐phenylpiperidine‐4‐carbonitrile derivatives as σ₁ receptor ligands. In vitro radioligand competition binding assays showed that all the ligands exhibited low nanomolar affinity for σ₁ receptors (K_i(σ₁) = 1.22–2.14 nM) and extremely high subtype selectivity (K_i(σ₂) = 830–1710 nM; K_i(σ₂)/K_i(σ₁) = 680–887). [¹⁸F]9 was prepared in 42–46% isolated radiochemical yield, with a radiochemical purity of >99% by HPLC analysis after purification, via nucleophilic ¹⁸F^‐ substitution of the corresponding tosylate precursor. Biodistribution studies in mice demonstrated high initial brain uptakes and high brain‐to‐blood ratios. Administration of SA4503 or haloperidol 5 min prior to injection of [¹⁸F]9 significantly reduced the accumulation of radiotracers in organs known to contain σ₁ receptors. Two radioactive metabolites were observed in the brain at 30 min after radiotracer injection. [¹⁸F]9 may serve as a lead compound to develop suitable radiotracers for σ₁ receptor imaging with positron emission tomography.     

Efficient O‐ and N‐(β‐fluoroethylation)s with NCA [18F]β‐fluoroethyl tosylate under microwave‐enhanced conditions

Reactions of no‐carrier‐added (NCA) [¹⁸F]β‐fluoroethyl tosylate with amine, phenol or carboxylic acid to form the corresponding [¹⁸F]N‐(β‐fluoroethyl)amine, [¹⁸F]β‐fluoroethyl ether or [¹⁸F]β‐fluoroethyl ester, were found to be rapid (2–10 min) and efficient (51–89% conversion) under microwave‐enhanced conditions. These conditions allow reactants to be heated rapidly to 150°C in a low boiling point solvent, such as acetonitrile, and avoid the need to use high boiling point solvents, such as DMSO and DMF, to promote reaction. The microwave‐enhanced reactions gave about 20% greater radiochemical yields than thermal reactions performed at similar temperatures and over similar reaction times. With a bi‐functional molecule, such as DL‐pipecolinic acid, [¹⁸F]β‐fluoroethyl tosylate reacts exclusively with the amino group. Copyright © 2004 John Wiley & Sons, Ltd.     

N3‐Substituted thymidine analogues III: radiosynthesis of N3‐[(4‐[18F]fluoromethyl‐phenyl)butyl]thymidine ([18F]‐FMPBT) and N3‐[(4‐[18F]fluoromethyl‐phenyl)pentyl] thymidine ([18F]‐FMPPT) for PET

Radiosyntheses of two N³‐substituted thymidine analogues, N³‐[(4[¹⁸F]fluoromethyl‐phenyl)butyl]thymidine ([¹⁸F]‐FMPBT) and N³‐[(4[¹⁸F]fluoromethyl‐phenyl)pentyl]thymidine ([¹⁸F]‐FMPPT), are reported. The precursor compounds 9 and 10 were synthesized in six steps and the standard compounds 13 and 14 were synthesized from these precursors. For radiosynthesis, compounds 9 and 10 were fluorinated with n‐Bu₄N[¹⁸F] to produce [¹⁸F]‐ 11 and [¹⁸F]‐ 12 , which by acid hydrolysis yielded [¹⁸F]‐ 13 and [¹⁸F]‐ 14 , respectively. The crude products were purified by high‐performance liquid chromatography to obtain [¹⁸F]‐FMPBT and [¹⁸F]‐FMPPT. The average decay‐corrected radiochemical yield for [¹⁸F]‐ 13 was 15% in five runs, and that for [¹⁸F]‐ 14 was 10% in four runs. The radiochemical purity was >99% and the specific activity was >74 GBq/µmol at the end of synthesis. The synthesis time was 80–90 min from the end of bombardment. Copyright © 2007 John Wiley & Sons, Ltd.     

Copper‐mediated reduction of 2‐[18F]fluoroethyl azide to 2‐[18F]fluoroethylamine

¹⁸F‐labelled fluoroalkylamines are attractive reagents for the preparation of positron emission tomography tracers containing amine, amide, and N‐heterocyclic moieties. Herein, we report that 2‐[¹⁸F]fluoroethylamine can be obtained from 2‐[¹⁸F]fluoroethyl azide by reduction with elemental copper under acidic conditions. Azide to amine reduction was achieved in near quantitative analytical yields within 30 min by heating a solution of 2‐[¹⁸F]fluoroethyl azide in the presence of copper wire and aqueous trifluoroacetic acid. Subsequent reaction of 2‐[¹⁸F]fluoroethylamine with benzoyl chloride in the presence of triethylamine provided N‐[¹⁸F]fluoroethyl benzamide in 63% decay‐corrected radiochemical yield from 2‐[¹⁸F]fluoroethyl azide. The utility of the Cu(0)/H⁺ azide reduction method was further exemplified by preparation of the potential GABA_A tracer 9H‐β‐carboline N‐2‐[¹⁸F]fluoroethylamide, which was obtained in 46% decay‐corrected radiochemical yield by reaction of 2‐[¹⁸F]fluoroethylamine with the corresponding 9H‐β‐carboline pentafluorophenyl ester. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorine‐18‐ and iodine‐125‐labelling of spiegelmers

Spiegelmers are high‐affinity l‐enantiomeric oligonucleotide ligands (aptamers) that display high resistance to enzymatic degradation compared to d‐oligonucleotides. Spiegelmers belong to the third generation of aptamers, and are currently extensively investigated as potential therapeutic agents. We have previously developed an original method to label natural oligonucleotides with radiohalogens and particularly with fluorine‐18, the most widely used positron‐emitter, t_1/2: 109.8 min. Using the same strategy, we herein report the labelling of Spiegelmers, both with fluorine‐18 for positron emission tomography imaging and iodine‐125 for high resolution autoradiography. Three 25‐mer l‐oligonucleotides have been used, differing (a) by the position of the terminal phosphorothioate monoester group (3′‐ or 5′‐end, and therefore differing by the position of the labelling on the macromolecule) and (b) by the nature of the backbone sugar moiety (2′‐OH or 2′‐H, therefore covering the RNA and DNA series, respectively). N‐(4‐[¹⁸F]fluorobenzyl)‐2‐bromoacetamide was synthesized in three radiochemical steps from 4‐cyano‐N,N,N‐trimethylanilinium trifluoromethanesulfonate and HPLC‐purified in 90 min (typical production: 2.2–2.4 GBq starting from a batch of 22–24 GBq of [¹⁸F]fluoride). N‐(4‐[¹²⁵I]iodobenzyl)‐2‐bromoacetamide was synthesized from the corresponding trimethylsilyl derivative (one pot, two radiochemical steps) and HPLC‐purified in 60 min (typical production: 24 MBq starting from 37 MBq of Na[¹²⁵I]I). Coupling of the Spiegelmers with the appropriate HPLC‐purified [radiolabelled]‐halobenzyl‐2‐bromoacetamide (MeOH/PBS (0.1 M, pH 8), 10 min, 120°C) gave the corresponding labelled conjugated Spiegelmers after RP‐HPLC purification. For fluorine‐18, the whole synthetic procedure yields up to 1.1 GBq of pure labelled Spiegelmers in 160 min with a specific radioactivity of 37–74 GBq/μmol at the end of synthesis starting from 22–24 GBq of [¹⁸F]fluoride. For iodine‐125, the whole synthetic procedure allows producing up to 7.4 MBq of pure labelled Spiegelmers in 100 min with a specific radioactivity of 11–37 GBq/μmol starting from 37 MBq of Na[¹²⁵I]I. Copyright © 2003 John Wiley & Sons, Ltd.     

N‐2‐(4‐N‐(4‐[18F]Fluorobenzamido)phenyl)‐propyl‐2‐propanesulphonamide: synthesis and radiofluorination of a putative AMPA receptor ligand

Arylpropylsulphonamides are in the focus of research as α‐amino‐3‐hydroxy‐5‐methyl‐4‐isoxazolpropionic acid (AMPA) receptor ligands. A new fluorine‐18‐labelled potentiator of AMPA receptors was synthesized as a potential radiotracer for cerebral imaging with positron emission tomography. Using N‐2‐(4‐N‐(4‐nitrobenzamido)phenyl)‐propyl‐2‐propanesulphonamide ( 7 ) as labelling precursor for a Kryptofix 2.2.2^®/K₂CO₃‐activated nucleophilic radiofluorination, the putative AMPA receptor ligand N‐2‐(4‐N‐(4‐[¹⁸F]fluorobenzamido)phenyl)‐propyl‐2‐propanesulphonamide [¹⁸F] 8 was obtained in one step. Optimization of the reaction parameters time, temperature, solvent and concentration gave a radiochemical yield of 38±8% at 180°C in dimethylsulphoxide within 30‐min reaction time. After a solid‐phase extraction followed by a high‐performance liquid chromatography separation, the product could be obtained in radiochemical yields of 5±1.5%. Radiochemical purity was higher than 95% and the specific activity amounted to 77±40 GBq/µmol. First in vitro assays with rat brain slices revealed a high non‐specific binding and a uniform distribution of [¹⁸F] 8 not lending it for in vivo imaging purposes. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and radiosynthesis of N5‐[18F]fluoroethyl‐Pirenzepine and its metabolite N5‐[18F]fluoroethyl‐LS 75

The well established M₁ selective muscarinergic antagonist Pirenzepine 11‐[2‐(4‐methyl‐piperazin‐1‐yl)‐acetyl]‐5,11‐dihydro‐benzo[e]pyrido[3,2‐b][1,4]diazepin‐6‐one (1) exhibits an unusual behaviour in vivo, which cannot be explained with M₁ antagonism exclusively. One of the aspects discussed is a specific interaction with poly ADP‐ribose polymerase (PARP‐1). 1 undergoes metabolism to form LS 75 5,11‐dihydro‐benzo[e]pyrido[3,2‐b][1,4]diazepin‐6‐one (2). In order to study deviations in Pirenzepine efficacy from pure M₁ binding in vivo using PET, appropriate positron emitter labelled analogues of 1 and 2 were synthesised. Non‐radioactive reference compounds 3 and 4 were tested for PARP‐1 inhibition. The n‐octanol–water partition coefficients of compounds 1, 2, 3 and 4 at pH 7.4 (logD_7.4) were determined. Both, 3 and 4 were labelled with ¹⁸F via 2‐[¹⁸F]fluoroalkylation in position 5 of the benzodiazepinone moiety to obtain N⁵‐[¹⁸F]fluoroethyl Pirenzepine [¹⁸F]‐3 and N⁵‐[¹⁸F]fluoroethyl LS 75 [¹⁸F]‐4. Radiotracers [¹⁸F]‐3 and [¹⁸F]‐4 were obtained in radiochemical yields of 15±4 % and 30±5% after 120 and 110 min, respectively. Metabolism of both compounds was investigated in vitro in human and rat plasma, respectively. Compound 3 did not show activity as an inhibitor of PARP‐1. Contrary, 4 displays moderate PARP‐1 inhibition potency. The new radiotracer [¹⁸F]‐4 can be applied for molecular imaging using autoradiography and PET. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of fluorine‐18‐labelled 5‐ and 6‐fluoro‐2‐pyridinamine

A one‐pot radiosynthesis method to prepare the new fluorine‐18‐labelled fluoropyridine derivatives 5‐[¹⁸F]fluoro‐2‐pyridinamine and 6‐[¹⁸F]fluoro‐2‐pyridinamine in two to three reaction steps was developed. The first step consisted of no‐carrier‐added nucleophilic aromatic substitution of commercially available halogen‐substituted 2‐pyridinecarboxamide or 2‐pyridinecarbonitrile derivatives with K[¹⁸F]F‐K₂₂₂ in DMSO at 150–180°C. The [¹⁸F]fluoride incorporation yields ranged from 67 to 98% for all studied precursor molecules. It is remarkable that 5‐bromo‐2‐pyridinecarbonitrile gave almost quantitative [¹⁸F]fluoride incorporation at the meta‐position (5‐position) of the pyridine ring after only 5 min of heating at 150°C. After base‐catalysed hydrolysis of the [¹⁸F]fluorinated pyridinecarbonitriles into their corresponding carboxamides, the latter were transformed in a Hofmann‐type rearrangement reaction into the respective amines by treatment of crude reaction mixtures with bromine and aqueous base (20–30% conversion yield). Reaction mixtures were purified by reversed‐phase semipreparative HPLC followed by strong cation exchange solid‐phase extraction to afford 5‐[¹⁸F]fluoro‐2‐pyridinamine and 6‐[¹⁸F]fluoro‐2‐pyridinamine in non‐decay‐corrected radiochemical yields of 6–10% in a total synthesis time of 83–112 min. The preparation of 5‐[¹⁸F]fluoro‐2‐pyridinamine is one of very few examples demonstrating the feasibility of nucleophilic meta‐[¹⁸F]fluorination of a pyridine derivative. Both 5‐[¹⁸F]fluoro‐2‐pyridinamine and 6‐[¹⁸F]fluoro‐2‐pyridinamine are new potentially useful radiolabelled synthons for radiopharmaceutical chemistry. Copyright © 2006 John Wiley & Sons, Ltd.     

Simplified synthesis of N‐(3‐[18F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([18F]β‐CFT‐FP) using [18F]fluoropropyl tosylate as the labelling reagent

A synthesis method has been developed for the labelling of N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([¹⁸F]β‐CFT‐FP), a potential radioligand for visualization of the dopamine transporters by positron emission tomography. The two‐step synthesis includes preparation of [¹⁸F]fluoropropyl tosylate and its use without purification in the fluoroalkylation of 2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane (nor‐β‐CFT). The final product is purified by HPLC. Optimization of the two synthesis steps resulted in a greater than 30% radiochemical yield of [¹⁸F]β‐CFT‐FP (decay corrected to end of bombardment). The synthesis time including HPLC‐purification was approximately 90 min. The radiochemical purity of the final product was higher than 99% and the specific radioactivity at the end of synthesis was typically 20 GBq/µmol. In comparison to alkylation by [¹⁸F]fluoropropyl bromide, the procedure described here results in an improved overall radiochemical yield of [¹⁸F]β‐CFT‐FP in a shorter time. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and in vitro evaluation of 18F‐β‐carboline alkaloids as PET ligands

A one‐step ¹⁸F‐labelling strategy was used to prepare four ¹⁸F‐labelled analogues of 7‐methoxy‐1‐methyl‐9H‐β‐carboline (harmine): 7‐(2‐[¹⁸F]fluoroethoxy)‐1‐methyl‐9H‐β‐carboline (5), 7‐(3‐[¹⁸F]fluoro‐propoxy)‐1‐methyl‐9H‐β‐carboline (6), 7‐[2‐(2‐[¹⁸F]fluoroethoxy)ethoxy]‐1‐methyl‐9H‐β‐carboline (7), and 7‐{2‐[2‐(2‐[¹⁸F]fluoroethoxy)ethoxy]‐ethoxy}‐1‐methyl‐9H‐β‐carboline (8). These were synthesized as potential positron emission tomography ligands for monoamine oxidase A (MAO‐A). A solution of pure labelled compound in buffer was obtained in <70 min from end of radionuclide production, with a decay‐corrected yield of up to 23%. The average specific binding to MAO‐A in rat brain, determined by autoradiography experiments, was highest for compounds 7 and 8 (89±2 and 96±1%, respectively), which was obtained at <1 nM radioligand concentration. Copyright © 2008 John Wiley & Sons, Ltd.     

Automated radiosynthesis of N‐(4‐[18F]fluorobenzyl)‐2‐bromoacetamide: an F‐18‐labeled reagent for the prosthetic radiolabeling of oligonucleotides

The potential for radiolabeled antisense oligonucleotides to image gene expression combined with the enhanced resolution of positron‐emission tomography justifies the continued interest in the development of oligonucleotides tagged with positron‐emitting radionuclides. The radiolabeling of oligonucleotides is a multi‐step process and may require handling large amounts of radioactivity initially. A previously reported method for radiolabeling oligonucleotides with N‐(4‐[¹⁸F]fluorobenzyl)‐2‐bromoacetamide was adapted for use in a commercially available automated synthesis unit by linking two reaction trains. The yield of N‐(4‐[¹⁸F]fluorobenzyl)‐2‐bromoacetamide ranged from 3 to 18% and the synthesis was completed within 1 h. Challenges in using this unit included the maintenance of anhydrous conditions for the effective reduction of 4‐[¹⁸F]fluorobenzonitrile. Preliminary results indicated that a mean yield of 36% could be obtained upon incubation of an oligonucleotide with N–(4‐[¹⁸F]fluorobenzyl)‐2‐bromoacetamide. The entire synthesis could be performed within 3 h. Copyright © 2008 John Wiley & Sons, Ltd.     

Substitution‐reduction: an alternative process for the [18F]N‐(2‐fluoroethylation) of anilines

Substitution of a halo atom (chloro or bromo) in easily prepared N‐haloacetyl‐anilines with no‐carrier added (NCA) cyclotron‐produced [¹⁸F]fluoride ion (¹⁸F, t_1/2= 109.8 min; β⁺=96.9%), followed by reduction with borane–tetrahydrofuran (BH₃–THF), provides an alternative route to NCA [¹⁸F]N‐(2‐fluoroethyl)‐anilines. This two‐step and one‐pot process is rapid (～50 min) and moderately high yielding (～40% decay‐corrected radiochemical yield (RCY) overall). In the nucleophilic substitution reaction, 18‐crown‐6 is preferred to Kryptofix^® 222 as complexing agent for the solubilization of the counter‐ion (K⁺), derived from an added metal salt, in acetonitrile. Weakly basic potassium bicarbonate is preferred as the added metal salt. Inclusion of a small amount of water, equating to 4–5 molar equivalents relative to 18‐crown‐6, base or precursor (held in equimolar ratio), is beneficial in preventing the adsorption of radioactivity onto the wall of the glass reaction vessel and for achieving high RCY in the nucleophilic substitution reaction. BH₃–THF is effective for the rapid reduction of the generated [¹⁸F]N‐fluoroacetyl‐aniline to the [¹⁸F]N‐(2‐fluoroethyl)‐aniline. Copyright © 2004 John Wiley & Sons, Ltd.     

Fluorine‐18 labelling of PNAs functionalized at their pseudo‐peptidic backbone for imaging studies with PET

Peptide nucleic acids (PNAs) form a unique class of synthetic macromolecules, originally designed as ligands for the recognition of double‐stranded DNA, where the deoxyribose phosphate backbone of original DNA is replaced by a pseudo‐peptide N‐(2‐aminoethyl)glycyl backbone, while retaining the nucleobases of DNA. We have previously developed an original method to label oligonucleotide‐based macromolecules with the short‐lived positron‐emitter fluorine‐18 (t_1/2: 109.8 min) using the N‐(4‐[¹⁸F]fluorobenzyl)‐2‐bromoacetamide reagent. Using this method, we herein report the fluorine‐18‐labelling of 13 decameric PNAs ( OLP_1‐13 ), of the same sequence (CTCATACTCT), but presenting selected modification of the pseudo‐peptidic backbone at two or three of the thymine residues (positions 2, 5 and 8). Structural characteristics of these backbone modifications include either an amino acid side chain (L ‐Lys, L ‐Glu, L ‐Leu and L ‐Arg) or a glycosyl moiety (mannose, galactose, fucose, N‐Ac‐galactosamine and N‐Ac‐glucosamine) attached via an appropriate spacer. N‐(4‐[¹⁸F]fluorobenzyl)‐2‐bromoacetamide was synthesized in three radiochemical steps from 4‐cyano‐N,N,N‐trimethylanilinium trifluoromethanesulfonate and HPLC‐purified in 85–90 min (typical production: 3.7–4.8 GBq starting from a batch of 29.6–31.4 GBq of [¹⁸F]fluoride). Conjugation of the fluorine‐18‐labelled bromoacetamide reagent with the PNAs was performed in a mixture of acetonitrile and HEPES buffer (0.1 M, pH 7.9) for 10 min at 60°C and gave the corresponding pure labelled conjugated PNAs ([¹⁸F] c‐OLP_1‐13 ) after RP‐HPLC purification. The whole synthetic procedure, including the preparation of the fluorine‐18‐labelled reagent, provides up to 0.9 GBq (25 mCi) of HPLC‐purified [¹⁸F] c‐OLP_1‐13 in 160 min with a specific radioactivity of 45–65 GBq/µmol (1.2–1.7 Ci/µmol) at the end of synthesis starting from 29.6 to 31.4 GBq (800–850 mCi) of [¹⁸F]fluoride. Copyright © 2004 John Wiley & Sons, Ltd.