The ICH guidance in practice: stress decomposition studies on three piperazinyl quinazoline adrenergic receptor-blocking agents and comparison of their degradation behaviour

Stress degradation studies were carried out on three piperazinyl quinazoline alpha(1)-adrenergic receptor blockers, viz. prazosin, terazosin, and doxazosin, following the conditions prescribed in the parent drug stability testing guideline (Q1AR) issued by International Conference on Harmonization (ICH). All drugs showed significant decomposition at 80 degrees C in acidic conditions (0.1 M HCl) and complete degradation in alkaline conditions (0.1 M NaOH). Under both these conditions, 2-piperazinyl-6,7-dimethoxy-4-aminoquinazoline was formed as a major decomposition product in all three drugs. The degradation pattern under ICH-prescribed photolytic conditions in liquid and solid states was also similar for all the drugs. The light exposure resulted in the formation of a cluster of degradation products. No degradation was observed in neutral and oxidative conditions. In solid state, all drugs were stable at 50 degrees C in a 1-month study. In alkaline conditions, the order of sensitivity to degradation of the three drugs was doxazosin>terazosin>prazosin, while the same was terazosin>doxazosin>prazosin under acidic conditions. Mechanistic explanation is provided for the variable behaviour of decomposition.     

Study of forced degradation behavior of enalapril maleate by LC and LC-MS and development of a validated stability-indicating assay method

In the present study, comprehensive stress testing of enalapril maleate was carried out according to ICH guideline Q1A(R2). The drug was subjected to acid (0.1N HCl), neutral and alkaline (0.1N NaOH) hydrolytic conditions at 80 degrees C, as well as to oxidative decomposition at room temperature. Photolysis was carried out in 0.1N HCl, water and 0.1N NaOH at 40 degrees C. Additionally, the solid drug was subjected to 50 degrees C for 60 days in a dri-bath, and to the combined effect of temperature and humidity, with and without light, at 40 degrees C/75% RH. The products formed under different stress conditions were investigated by LC and LC-MS. The LC method that could separate all degradation products formed under various stress conditions involved a C18 column and a mobile phase comprising of ACN and phosphate buffer (pH 3). The flow rate and detection wavelength were 1 ml min(-1) and 210 nm, respectively. The developed method was found to be precise, accurate, specific and selective. It was suitably modified for LC-MS studies by replacing phosphate buffer with water, where pH was adjusted to 3.0 with formic acid. The drug showed instability in solution state (under acidic, neutral, alkaline and photolytic stress conditions), but was relatively stable in the solid-state, except formation of minor products under accelerated conditions. Primarily, maximum degradation products were formed in acid conditions, though the same were also produced variably under other stress conditions. The LC-MS m/z values and fragmentation patterns of two of the five products matched with enalaprilat and diketopiperazine derivative, previously known degradation products of enalapril. Also, m/z value of another product matched with an impurity listed in the drug monograph in European Pharmacopoeia. Rest two were hitherto unknown degradation products. The products were characterized through LC-MS fragmentation studies. Based on the results, a more complete degradation pathway for the drug could be proposed.     

LC, LC-MS/TOF and MS(n) studies for the identification and characterization of degradation products of nelfinavir mesylate

The objective of the present investigation was to separate, identify and characterize the major degradation products (DPs) of nelfinavir mesylate generated under hydrolytic, oxidative, photolytic and thermal stress conditions as advised in International Conference on Harmonization (ICH) guideline Q1A(R2). The drug was found to degrade under acidic, basic, oxidative and photolytic stress, while it was stable in neutral and thermal stress conditions. A total of three degradation products were formed, which were separated on a C-18 column employing a gradient HPLC method. A complete mass fragmentation pathway of the drug was first established with the help of multi-stage (MS(n)) and MS/TOF accurate mass studies. Then stressed samples were subjected to LC-MS/TOF studies, which provided their fragmentation pattern and accurate masses. The mass spectral data were employed to characterize the DPs and assign structures to them. The total information was also used to establish the degradation pathway of the drug. The degradation products were identified as 3-hydroxy-N-((2R,3R)-3-hydroxy-1-(phenylthio)butan-2-yl)-2-methylbenzamide and (3S,4aS,8aS)-N-tert-butyl-2-((2R,3R)-2-hydroxy-3-(3-hydroxy-2-methylbenzamido)-4-(phenylsulfinyl)butyl)decahydroisoquinoline-3-carboxamide.     

Identification and Characterization of an Oxidative Degradation Product of Fexofenadine, Development and Validation of a Stability-Indicating RP-UPLC Method for the Estimation of Process Related Impurities and Degradation Products of Fexofenadine in Pharmaceutical Formulations

A novel stability-indicating gradient RP-UPLC method was developed for the quantitative determination of process related impurities and forced degradation products of fexofenadine HCl in pharmaceutical formulations. The method was developed by using Waters Aquity BEH C18 (100 mm x 2.1 mm) 1.7 μm column with mobile phase containing a gradient mixture of solvent A (0.05% triethyl amine, pH adjusted to 7.0 with ortho-phosphoric acid) and B (10:90 v/v mixture of water and acetonitrile). The flow rate of mobile phase was 0.4 mL/min with column temperature of 30°C and detection wavelength at 220nm. Fexofenadine HCl was subjected to the stress conditions including oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Fexofenadine HCl was found to degrade significantly in oxidative stress conditions, and degradation product was identified and characterized by ESI-MS/MS, (1)H and (13)C NMR spectroscopic method as the N-oxide 2-[4-(1-hydroxy-4-{4-[hydroxy(diphenyl)methyl]-1-oxido-piperidin-1-yl}butyl)phenyl]-2-methylpropanoic acid. The degradation products were well resolved from fexofenadine and its impurities. The mass balance was found to be satisfactory in all the stress conditions, thus proving the stability-indicating capability of the method. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection and quantification, accuracy, precision and robustness.     

Stress degradation studies on lornoxicam using LC, LC-MS/TOF and LC-MSn

Lornoxicam was subjected to forced degradation studies under hydrolytic (acidic, basic and neutral), oxidative, photolytic and thermal stress conditions, as defined under ICH guideline Q1A (R2). The drug degraded significantly in hydrolytic, oxidative and photoneutral conditions, leading to the formation of eight degradation products in total. It was stable on exposure to light and dry heat in the solid state. The stressed samples in which degradation was observed were mixed together and used to develop a stability-indicating HPLC method wherein degradation products were separated from the drug and also from each other. To characterize the degradation products, a complete mass fragmentation pathway of the drug was first established with the help of MS/TOF, MSⁿ and H/D exchange mass studies. The same was followed by LC-MS/TOF and on-line H/D exchange experiments on the degradation products. The degradation pathway of the drug was outlined, justified by the mechanisms of formation of the degradation products.     

Rapid liquid chromatographic method for the determination of roflumilast in the presence of degradation products

A forced degradation study on roflumilast drug substance was conducted under the conditions of hydrolysis, oxidation, thermal and photolysis. The method was developed and optimized by analyzing forcefully degraded samples. The best separation was achieved on a Zorbax SB C18 1.8 μm column with 0.005 M ammonium formate buffer pH 3.5 and acetonitrile as mobile phase in a 13 min run time. The proposed method was able to resolve all the possible degradation products formed during stress study. The drug was stable to neutral, thermal and photolytic conditions but unstable to acidic, alkaline and oxidative conditions at 80° for 24 h. The degradation products resulting from stress study did not interfere in assay and related substances of roflumilast and thus the method can be regarded as stability indicating. An alternate method was also developed on a conventional 250×4.6 mm, 5 μm column wherein runtime was 38 min. Thus rapid resolution high throughput column was able to reduce the run time from 38 min to 13 min.     

Evaluation of degradation kinetics and physicochemical stability of tenofovir

Tenofovir (TFV) has been proven to prevent the transmission of the Human Immunodeficiency Virus (HIV) through the vagina. But, there is little information available about its stability under various storage and stress conditions. Hence, this study aimed to investigate the degradation behavior and physicochemical stability of TFV using liquid chromatography coupled mass spectrometry (LC‐MS) and solid state X‐ray diffraction (XRD) analyses. The LC‐MS analysis was performed on a QTrap mass spectrometer with an enhanced mass spectrum (EMS) scan in positive mode. A reversed phase C₁₈ column was used as the stationary phase. TFV exhibited degradation under acidic and alkaline hydrolytic conditions. The degradation products with m/z 289.2 and 170 amu have been proposed as 6‐Hydroxy adenine derivative of TFV, and (2‐hydroxypropan‐2‐yloxy) methylphosphonic acid, respectively. A pseudo‐first‐order degradation kinetic allowed for estimating the shelf‐life, half‐life, and time required for 90% degradation of 3.84, 25.34, and 84.22 h in acidic conditions, and 58.26, 384.49, and 1277.75 h in alkaline conditions, respectively. No significant degradation was observed at pH 4.5 (normal cervicovaginal pH) and oxidative stress conditions of 3% and 30% v/v hydrogen peroxide solutions. The shelf life of TFV powder at room temperature was 23 months as calculated by using an Arrhenius plot. The XRD pattern showed that the drug was stable and maintained its original crystallinity under the accelerated and thermal stress conditions applied. Stability analyses revealed that the TFV was stable in various stress conditions; however, formulation strategies should be implemented to protect it in strong acidic and alkaline environments. Copyright © 2014 John Wiley & Sons, Ltd.     

Stress degradation studies on varenicline tartrate and development of a validated stability-indicating HPLC method

A simple, rapid and stability-indicating reversed-phase liquid chromatographic method was developed for the assay of varenicline tartrate (VRT) in the presence of its degradation products generated from forced decomposition studies. The HPLC separation was achieved on a C18 Inertsil column (250 mm × 4.6 mm i.d. particle size is 5 μm) employing a mobile phase consisting of ammonium acetate buffer containing trifluoroacetic acid (0.02M; pH 4) and acetonitrile in gradient program mode with a flow rate of 1.0 mL min(-1). The UV detector was operated at 237 nm while column temperature was maintained at 40 °C. The developed method was validated as per ICH guidelines with respect to specificity, linearity, precision, accuracy, robustness and limit of quantification. The method was found to be simple, specific, precise and accurate. Selectivity of the proposed method was validated by subjecting the stock solution of VRT to acidic, basic, photolysis, oxidative and thermal degradation. The calibration curve was found to be linear in the concentration range of 0.1-192 μg mL(-1) (R(2) = 0.9994). The peaks of degradation products did not interfere with that of pure VRT. The utility of the developed method was examined by analyzing the tablets containing VRT. The results of analysis were subjected to statistical analysis.     

Validated stability-indicating HPLC method for the determination of pridinol mesylate. Kinetics study of its degradation in acid medium

The stability of pridinol mesylate (PRI) was investigated under different stress conditions, including hydrolytic, oxidative, photolytic and thermal, as recommended by the ICH guidelines. Relevant degradation was found to take place under acidic (0.1N HCl) and photolytic (visible and long-wavelength UV-light) conditions, both yielding the product resulting from water elimination (ELI), while submission to an oxidizing environment gave the N-oxidation derivative (NOX). The standards of these degradation products were synthesized and characterized by IR, (1)H and (13)C NMR spectroscopy. A simple, sensitive and specific HPLC method was developed for the quantification of PRI, ELI and NOX in bulk drug, and the conditions were optimized by means of a statistical design strategy. The separation employs a C(18) column and a 51:9:40 (v/v/v) mixture of MeOH, 2-propanol and potassium phosphate solution (50mM, pH 6.0), as mobile phase, delivered at 1.0 ml min(-1); the analytes were detected and quantified at 220 nm. The method was validated, demonstrating to be accurate and precise (repeatability and intermediate precision levels) within the corresponding linear ranges of PRI (0.1-1.5 mg ml(-1); r=0.9983, n=18) and both impurities (0.1-1.3% relative to PRI, r=0.9996 and 0.9995 for ELI and NOX, respectively, n=18). Robustness against small modifications of pH and percentage of the aqueous mobile phase was ascertained and the limits of quantification of the analytes were also determined (0.4 and 0.5 microg ml(-1); 0.04% and 0.05% relative to PRI for ELI and NOX, respectively). Peak purity indices (>0.9997), obtained with the aid of diode-array detection, and satisfactory resolution (R(s)>2.0) between PRI and its impurities established the specificity of the determination, all these results proving the stability-indicating capability of the method. The kinetics of the degradation of PRI in acid medium was also studied, determining that this is a first-order process with regards to drug concentration, with an activation energy of 25.5 Kcal mol(-1) and a t(1/2)=10,830 h, in 0.1N HCl at 38 degrees C.     

The degradation pathways of glucagon in acidic solutions

OBJECTIVE: Glucagon is a 29 amino acid peptide hormone that exhibits degradation via both chemical and physical pathways. The objective of the studies reported herein was to identify the degradation products and scheme for glucagon hydrolysis in acidic solutions. METHODS: Solutions of glucagon in 0.01 N HCl (pH 2.5) were degraded at 60 degrees C for 70 h. One isocratic and two gradient RP-HPLC methods were developed to separate the degradation products. Structure elucidation of the separated peaks was achieved using amino acid sequencing, amino acid analysis, and mass spectrometry. Degradation was carried out in the pH range 1.5-5 to check for changes in degradation scheme with pH. Authentic samples of degradation products were degraded under similar acidic conditions to confirm precursor successor relationships in the degradation scheme. RESULTS: Sixteen major degradation products were isolated and identified. The major pathways of degradation were found to be aspartic acid cleavage at positions 9, 15, and 21 and glutaminyl deamidation at positions 3, 20, and 24. Cleavage occurred on both sides of Asp-15 but only on the C-terminal side of Asp-9 and Asp-21. Deamidation of the Asn residue at position 28 was not detected.     

A stability indicating HPLC method for the determination of clobazam and its basic degradation product characterization

Background

Clobazam is used for the treatment of different types of seizure and epilepsy. The present research is undertaken to study the systematic forced degradation of clobazam and to identify its main degradation product under basic conditions.

Methods

The degradation of clobazam was studied under different conditions. Clobazam and its degradation products were separated using a Nova-Pak C18 column and a mixture of KH₂PO₄ 50 mM (pH 8.5) and acetonitrile (50:50, v/v) as the mobile phase with UV detection at 230 nm.

Results

The within-day and between-day precision values in the calibration range of 0.1-20 μg/ml were within 0.5-1.5%. Clobazam was relatively stable in solid from under exposure to visible and UV light and also heat. The clobazam aqueous solution of clobazam was more labile under exposure to visible and UV light. The bulk drug was significantly degraded under exposure to 2 M HCl, 0.1 M NaOH or 3% H₂O₂. Using the tablet powder, higher degradation rates were observed under different stress conditions. The main degradation product of clobazam under basic condition was subsequently characterized.

Conclusion

The developed method could be used for the determination of clobazam in the presence of its degradation products with acceptable precision and accuracy. The applicability of the proposed method was evaluated in commercial dosage forms analysis.     

Determination of pKa and forced degradation of the indoloquinoline antimalarial compound cryptolepine hydrochloride

The study was aimed at determining the acid dissociation constant of cryptolepine hydrochloride and its degradation under stressed conditions. The pKa was determined using buffers in the pH range 10.4–11.6 by spectrophotometry at controlled measurement temperature (20?±?0.5°C). The stability of the compound was investigated under various stressed conditions including neutral, acid, alkaline, light, dry heat and oxidation at different temperatures. Degradation products were analysed by HPLC. The calculated pKa values (uncorrected and corrected for ionic strength) were 11.09?±?0.03 and 10.99?±?0.05, respectively. A graphical approach yielded an uncorrected pKa value of 11.07. Degradation of the compound in water, 0.1?M HCl, 0.1?M NaOH and 3% hydrogen peroxide followed a first order reaction. With proper temperature control and maintenance of uniform ionic strength, a reproducible pKa of cryptolepine is obtainable by spectrophotometry. The compound was found to be highly susceptible to oxidation and relatively stable in neutral and acidic conditions but less so in a basic medium. There were no significant changes in concentration of samples exposed to light and dry heat at 60°C over the study period.     

Characterization of forced degradation products of toloxatone by LC-ESI-MS/MS

Forced degradation of toloxatone in solutions under basic, acidic, neutral, photo UV–VIS, photo UVC and oxidative stress conditions was investigated and structural elucidation of its degradation products was performed with the use of UHPLC system coupled ESI-Q-TOF mass spectrometer. Eight degradation products were found and their masses and formulas were obtained with high accuracy (0.09–3.79?ppm). The structure of unknown degradation products were elucidated from MS/MS fragmentation spectra of all analyzed compounds. Additionally, whole signals of decomposed substances were compared chemometrically. It was found that toloxatone is fragile towards basic hydrolysis, oxidative conditions and UVC irradiation. Finally, the toxicity of transformation products was computationally evaluated and compared in multivariate manner.     

HPLC and LC-MS studies on stress degradation behaviour of tinidazole and development of a validated specific stability-indicating HPLC assay method

The objective of the current investigation was to study the degradation behaviour of tinidazole under different ICH recommended stress conditions by HPLC and LC-MS, and to establish a validated stability-indicating HPLC method. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal decomposition. Extensive degradation was found to occur in alkaline medium, under oxidative stress and in the photolytic conditions. Mild degradation was observed in acidic and neutral conditions. The drug was stable to thermal stress. Successful separation of drug from degradation products formed under stress conditions was achieved on a C-18 column using water-acetonitrile (88:12) as the mobile phase. The flow rate was 0.8 ml x min(-1) and the detection wavelength was 310 nm. The method was validated with respect to linearity, precision, accuracy, specificity and robustness. The utility of the procedure was verified by its application to marketed formulations that were subjected to accelerated stability studies. The method well separated the drug and degradation products even in actual samples. The products formed in marketed liquid infusions were similar to those formed during stress studies.     

Stability-indicating study of the anti-Alzheimer's drug galantamine hydrobromide

Galantamine hydrobromide was subjected to different stress conditions (acidic, alkaline, thermal, photolytic and oxidative). Degradation was found to occur under acidic, photolytic and oxidative conditions, while the drug was stable under alkaline and elevated temperature conditions. A stability-indicating reversed-phase liquid chromatographic method was developed for the determination of the drug in the presence of its degradation products. The method was validated for linearity, precision, accuracy, specificity, selectivity and intermediate precision. Additionally, the degradation kinetics of the drug was assessed in relevant cases. The kinetics followed a first order behavior in the case of acidic and photolytic degradation, while a two-phase kinetics behavior was found for the oxidative degradation. The degradation products were characterized by mass spectrometry and nuclear magnetic resonance spectroscopy. Dehydration, epimerization and N-oxidation were the main processes observed during the degradation of galantamine. Moreover, if sufficient material could be isolated the inhibitory activity against the target enzyme acetylcholinesterase was also assessed.     

Identification of imatinib mesylate degradation products obtained under stress conditions

In this paper, the decomposition of imatinib mesylate (ImM) under hydrolytic (neutral, acidic, alkaline), oxidative and photolytic conditions was studied. The imatinib mesylate is practically photostable and stable under neutral conditions. The main degradation products under acidic and alkaline conditions are compounds: 4-methyl-N³-(4-pyridin-3-yl-pyrimidyn-2-yl)-benzene-1,3-diamine (2) and 4-(4-methyl-piperazin-1-ylmethyl)-benzoic acid (3). The main degradation products under oxidation conditions, i.e. 4-[(4-methyl-4-oxido-piperazin-1-yl)-methyl]-N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)-phenyl]-benzamide (6), 4-[(4-methyl-1-oxido-piperazin-1-yl)-methyl]-N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)-phenyl]-benzamide (7) and 4-[(4-methyl-1,4-dioxido-piperazin-1-yl)-methyl]-N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)-phenyl]-benzamide (8), were isolated from the reaction mixtures and identified by the HPLC, ¹H NMR and MS techniques. During stress study the suitability of the proposed HPLC method to control purity of the samples was verified.     

Production and on-line acetylcholinesterase bioactivity profiling of chemical and biological degradation products of tacrine

The present paper describes a methodology for rapid assessment of chemical and biological degradation products of tacrine and their bioactivity for acetylcholinesterase (AChE). Analysis was achieved by utilizing liquid chromatography coupled to parallel high resolution mass spectrometry and an on-line continuous-flow AChE bioassay for biochemical detection. Key advantage of the strategy described involves the straightforward chemical production of large quantities of products of which many were the same as formed during the biological degradation by cytochromes P450 (CYPs). For this, chemical degradation of tacrine was evaluated under acidic, basic and oxidative conditions as well as elevated temperatures and light exposure. Chemical degradation products were only formed after 2 h under reflux with 3% hydrogen peroxide, where more than 50% of tacrine was converted to degradation products. Many of these products showed bioactivity. Mostly, mono-, di- or tri-oxygenated compounds were observed. This study demonstrated that the combination of chemical and biological degradation provides valuable information indicating that assessment of biological activity is important not only for biological degradation products, but also for chemical degradation products when formed. Furthermore, chemical degradation can be used to produce conveniently and in relatively large quantities clean mixtures of compounds that are also produced during metabolic incubations.     

Microwave-assisted forced degradation using high-throughput microtiter platforms

Parallel microwave-assisted forced degradation in sealed HPLC/GC vials utilizing a high-throughput platform is described. The platform is made out of strongly microwave absorbing silicon carbide (SiC) plates providing 20 bore holes having the appropriate dimensions to be fitted with standard autosampler HPLC/GC vials serving as reaction vessels. Due to the possibility of heating up to four SiC platforms simultaneously (80 reactions) in a dedicated multimode microwave cavity with online temperature control, efficient parallel forced degradation studies can be performed at temperatures and pressures of up to 200 °C and 20 bar, respectively. Since degradation reactions and analyses are performed in the same vessel, the sample handling effort is reduced and errors caused by a required transfer step are avoided. As proof-of-concept, the platform was evaluated for the parallel testing of various stress conditions on the drug indomethacin. The obtained data provided a rapid overview over suitable stress conditions at high temperatures, implicating a significant reduction in time required for the forced degradation compared to conventional methods at room temperature. Applying acidic (0.01-0.1 M HCl, 1-15 M AcOH), basic (0.001-0.01 M NaOH, 0.001-0.01 M NaHCO₃) and oxidative (0.001-0.02% H₂O₂) stress conditions at 150 °C for 5 min resulted in similar indomethacin degradation levels requiring 0.5-20 h at lower temperatures (25-100 °C). In addition solvent stability tests exposing indomethacin to 20 different, mostly organic, solvents at 150 °C and 160 °C for 30 min and the exposure of the solid drug to various gases (N₂, Ar, O₂, NH₃, air), applying high temperatures are presented.     

Development and Validation of a Stability-Indicating Capillary Electrophoresis Method for the Determination of Zolpidem Tartrate in Tablet Dosage Form with Positive Confirmation using 2D- and 3D-DAD Fingerprints

The aim of the current study was to develop a simple, precise, and accurate capillary zone electrophoresis method for the determination of zolpidem tartrate in tablet dosage form. Separation was conducted in normal polarity mode at 25°C, 22 kV, using hydrodynamic injection for 10 s. Separation was achieved using a background electrolyte of 20 mM disodium hydrogen phosphate adjusted with phosphoric acid (85%), pH at 5.50, and detection at 254 nm. Using the above optimized conditions, complete determination took place in less than 3 min using amiloride HCl as the internal standard. The method was linear over the range of 3–1000 μg mL⁻¹ with a correlation coefficient of 0.9999. Forced degradation studies were conducted by introducing a sample of zolpidem tartrate standard and pharmaceutical sample solutions to different forced degradation conditions, being neutral (water), basic (0.1 M NaOH), acidic (0.1 M HCl), oxidative (10% H₂O₂), temperature (60°C in oven for 3 days), and photolytic (exposure to UV light at 254 nm for 2 h). Degradation products resulting from the stress studies did not interfere with the detection of zolpidem tartrate and the assay can be considered stability-indicating.     

Determination of degradation products from the calcium-channel blocker isradipine

Mass Spectrometry has been used to determine the identity of a number of degradation products from the bulk drug form of Isradipine (DynaCirc). Liquid chromatography coupled with mass spectrometry (LC/MS) was used to analyze the degraded samples and tentative identifications were made based upon the known reactivity of the molecule, molecular weight measurements and mass spectral fragmentation patterns. Isradipine was found to be stable to heating, acidic and basic conditions, but susceptible to degradation from exposure to UV light and oxidative processes.