Nitrogen removal performance of a hybrid anammox reactor

The anaerobic ammonium oxidation (anammox) process has attracted considerable attention in recent years as an alternative to conventional nitrogen removal technologies. In this study, an innovative hybrid reactor combining fluidized and fixed beds for anammox treatment was developed. The fluidized bed was mechanically stirred and the gaseous product could be rapidly released from the anammox sludge to prevent washout of the sludge caused by floatation. The fixed bed comprising a non-woven biomass carrier could efficiently catch sludge to reduce washout. During the operation, nitrogen loading rates to the reactor were increased to 27.3 kg N/m³/d, with total nitrogen removal efficiencies of 75%. The biomass concentration in the fluidized bed reached 26-g VSS/L. Anammox granules were observed in the reactors, with settling velocities and sludge volumetric index of 27.3 ± 6.5 m/h and 23 mL/g, respectively. Quantification of extracellular polymeric substances revealed the anammox granules contained a significant amount of extracellular proteins.     

Development of a simultaneous partial nitrification and anaerobic ammonia oxidation process in a single reactor

Up-flow oxygen-controlled biofilm reactors equipped with a non-woven fabric support were used as a single reactor system for autotrophic nitrogen removal based on a combined partial nitrification and anaerobic ammonium oxidation (anammox) reaction. The up-flow biofilm reactors were initiated as either a partial nitrifying reactor or an anammox reactor, respectively, and simultaneous partial nitrification and anammox was established by careful control of the aeration rate. The combined partial nitrification and anammox reaction was successfully developed in both biofilm reactors without additional biomass inoculation. The reactor initiated as the anammox reactor gave a slightly higher and more stable mean nitrogen removal rate of 0.35 (± 0.19) kg-N m⁻³ d⁻¹ than the reactor initiated as the partial nitrifying reactor (0.23 (± 0.16) kg-N m⁻³ d⁻¹). FISH analysis revealed that the biofilm in the reactor started as the anammox reactor were composed of anammox bacteria located in inner anoxic layers that were surrounded by surface aerobic AOB layers, whereas AOB and anammox bacteria were mixed without a distinguishable niche in the biofilm in the reactor started as the partial nitrifying reactor. However, it was difficult to efficiently maintain the stable partial nitrification owing to inefficient aeration in the reactor, which is a key to development of the combined partial nitrification and anammox reaction in a single biofilm reactor.     

Partial nitritation and anammox of a livestock manure digester liquor and analysis of its microbial community

A swim-bed reactor for partial nitritation with polymeric coagulant treatment and an UASB reactor for anammox were applied to the treatment of livestock manure digester liquor. The partial nitritation was maintained for 32 days under a 1.6 kg N/m³/d nitrogen loading rate (NLR) with an average conversion efficiency of 51%, and achieved 1.65 kg N/m³/d of the maximum nitrite production rate under 2.58 kg N/m³/d of NLR. Although 200 mg/L of TOC remained in the effluent of the partial nitritation reactor, the anammox nitrogen removal rate was not significantly decreased and a relatively high rate of 2.0 kg N/m³/d was obtained under a NLR of 2.2 kg N/m³/d. 16S rRNA gene analysis showed that Nitrosomonas and KSU-1 were dominant in the partial nitritation and anammox reactor, respectively. The results of this study demonstrated that the partial nitritation-anammox process has possibility of applying to the nitrogen removal of livestock manure digester liquor.     

Novel autotrophic nitrogen removal system using gel entrapment technology

A pilot plant involving a nitritation-anammox process was operated for treating digester supernatant. In the preceding nitritation process, ammonium-oxidizing bacteria were immobilized in gel carriers, and the growth of nitrite-oxidizing bacteria was suppressed by heat-shock treatment. For the following anammox process, in order to maintain the anammox biomass in the reactor, a novel process using anammox bacteria entrapped in gel carriers was also developed. The nitritation performance was stable, and the average nitrogen loading and nitritation rates were 3.0 and 1.7 kg N m⁻³ d⁻¹, respectively. In the nitritation process, nitrate production was completely suppressed. For the anammox process, the startup time was about two months. Stable nitrogen removal was achieved, and an average nitrogen conversion rate of 5.0 kg N m⁻³ d⁻¹ was obtained. Since the anammox bacteria were entrapped in gel carriers, stable nitrogen removal performance was attained even at an influent suspended solids concentration of 1500 mg L⁻¹.     

High-rate nitrogen removal from livestock manure digester liquor by combined partial nitritation–anammox process

In this study, combination of a partial nitritation reactor, using immobilized polyethylene glycol (PEG) gel carriers, and a continuous stirred granular anammox reactor was investigated for nitrogen removal from livestock manure digester liquor. Successful nitrite accumulation in the partial nitritation reactor was observed as the nitrite production rate reached 2.1 kg-N/m³/day under aerobic nitrogen loading rate of 3.8 kg-N/m³/day. Simultaneously, relatively high free ammonia concentrations (average 50 mg-NH₃/l) depressed the activity of nitrite oxidizing bacteria with nitrate concentration never exceeding 3% of TN concentration in the effluent of the partial nitritation reactor (maximum 35.2 mg/l). High nitrogen removal rates were achieved in the granular anammox reactor with the highest removal rate being 3.12 kg-N/m³/day under anaerobic nitrogen loading rate of 4.1 kg-N/m³/day. Recalcitrant organic compounds in the digester liquor did not impair anammox reaction and the SS accumulation in the granular anammox reactor was minimal. The results of this study demonstrated that partial nitritation–anammox combination has the potential to successfully remove nitrogen from livestock manure digester liquor.     

Identification of bacteria coexisting with anammox bacteria in an upflow column type reactor

Anammox process has attracted considerable attention in the recent years as an alternative to conventional nitrogen removal technologies. In this study, a column type reactor using a novel net type acrylic fiber (Biofix) support material was used for anammox treatment. The Biofix reactor was operated at a temperature of 25°C (peak summer temperature, 31.5°C). During more than 340 days of operation for synthetic wastewater treatment, the nitrogen loading rates of the reactor were increased to 3.6 kg-N/m³/d with TN removal efficiencies reaching 81.3%. When the reactor was used for raw anaerobic sludge digester liquor treatment, an average TN removal efficiency of 72% was obtained with highest removal efficiency of 81.6% at a nitrogen loading rate of 2.2 kg-N/m³/d. Results of extracellular polymeric substances (EPS) quantification revealed that protein was the most abundant component in the granular sludge and was found to be almost twice than that in the sludge attached to the biomass carriers. The anammox granules in the Biofix reactor illustrated a dense morphology substantiated by scanning electron microscopy and EPS results. The results of DNA analyses indicated that the anammox strain KSU-1 might prefer relatively low nutrient levels, while the anammox strain KU2 strain might be better suited at high nutrient concentration. Other types of bacteria were also identified with the potential of consuming dissolved oxygen in the influent and facilitating survival of anammox bacteria under aerobic conditions.     

Innovative treatment system for digester liquor using anammox process

This study demonstrated that partial nitritation using nitrifying activated sludge entrapped in a polyethylene glycol (PEG) gel carrier, as a pretreatment to anammox process, could be successfully applied to digester liquor of biogas plant at a nitrogen loading rate of 3.0 kg-N/m³/d. The nitritation process produced an effluent with a NO₂–N/NH₄–N ratio between 1.0 and 1.4, which was found to be suitable for the subsequent anammox process. A high SS concentration (2000–3000 mg/l) in the digester liquor did not affect partial nitritation treatment performances. Effluent from this partial nitritation reactor was successfully treated in the anammox reactor using anammox sludge entrapped in the PEG gel carrier with T-N removal rates of greater than 4.0 kg-N/m³/d. Influent BOD and SS contents did not inhibit anammox activity of the anammox gel carrier. The combination of partial nitritation and anammox reactors using PEG entrapped nitrifying and anammox bacteria was shown to be effective for the removal of high concentration ammonium in the digester liquor of a biogas plant.     

Importance of the operating pH in maintaining the stability of anoxic ammonium oxidation (anammox) activity in moving bed biofilm reactors

Two bench-scale parallel moving bed biofilm reactors (MBBR) were operated to assess pH-associated anammox activity changes during long term treatment of anaerobically digested sludge centrate pre-treated in a suspended growth partial nitrification reactor. The pH was maintained at 6.5 in reactor R1, while it was allowed to vary naturally between 7.5 and 8.1 in reactor R2. At high nitrogen loads reactor R2 had a 61% lower volumetric specific nitrogen removal rate than reactor R1. The low pH and the associated low free ammonia (FA) concentrations were found to be critical to stable anammox activity in the MBBR. Nitrite enhanced the nitrogen removal rate in the conditions of low pH, all the way up to the investigated level of 50 mg NO₂-N/L. At low FA levels nitrite concentrations up to 250 mg NO₂-N/L did not cause inactivation of anammox consortia over a 2-days exposure time.     

Dispersal and control of anammox granular sludge at high substrate concentrations

This paper reports about the dispersal and control of anammox granular sludge at high substrate concentrations. The results demonstrate that anammox granular sludge would turn into flocculent sludge when the substrate concentrations exceed the inhibitory threshold concentrations, with an apparent drop in the settling velocity of anammox sludge from 73.73 to 16.49 m/h. Moreover, the sludge was washed out of the reactor and a decrease in the nitrogen removal rate from 23.82 to 16.97 kg N/(m³/day) was observed. The dominant anammox bacteria in the granular and flocculent sludge were Candidatus Kuenenia stuttgartiensis; however, the contents of heme c and extracellular polymeric substances in the flocculent sludge were much lower than in the granular sludge. Furthermore, the chemical composition of extracellular polymeric substances was different. The high nitrite concentrations more than the inhibitory threshold concentrations were regarded as the reason for the observed granular sludge dispersal and deterioration in reactor performance. The apparent dispersed granular sludge and malfunction of reactor performance could be recovered by means of washing out the residual substrate from the reactor and then re-running the reactor from low substrate concentrations.     

Aerobic granular sludge formation for high strength agro-based wastewater treatment

The present study investigates the formation of aerobic granular sludge in sequencing batch reactor (SBR) fed with palm oil mill effluent (POME). Stable granules were observed in the reactor with diameters between 2.0 and 4.0 mm at a chemical oxygen demand (COD) loading rate of 2.5 kg COD m⁻³ d⁻¹. The biomass concentration was 7600 mg L⁻¹ while the sludge volume index (SVI) was 31.3 mL g SS⁻¹ indicating good biomass accumulation in the reactor and good settling properties of granular sludge, respectively. COD and ammonia removals were achieved at a maximum of 91.1% and 97.6%, respectively while color removal averaged at only 38%. This study provides insights on the development and the capabilities of aerobic granular sludge in POME treatment.     

Mechanical shear contributes to granule formation resulting in quick start-up and stability of a hybrid anammox reactor

It appears that if suspended biomass washout can be reduced effectively, granule formation will be fastened in fluidized bed. Quicker reactor start-up can be anticipated especially for those system keeping slow growth bacteria such as anammox. A hybrid reactor combined fixed-bed with nonwoven fabrics as biomass carrier and fluidized bed with slow speed mechanical stirring was therefore developed, and its nitrogen removal performances was evaluated experimentally. Only in 38 days, the total nitrogen removal rate (NRR) reached to 1.9 kg(N) m⁻³ day⁻¹ and then doubled within 17 days, with total nitrogen removal efficiency kept above 70%. After 180 days reactor operating, the NRR reached a maximum value of 6.6 kg(N) m⁻³ day⁻¹ and the specific anammox activity was gradually constant in 0.32 kg(N) kg(VSS)⁻¹ day⁻¹. Biomass attached on nonwoven fabrics could additionally improve reactor nitrogen removal by 8%. The dominant size of granular sludge reached to 0.78 mm with stirring speed adjusted from 30 to 80 rpm and the hydraulic retention time (HRT) from 8 to 1.5 h during the whole operating time. Scanning electron microscope observation showed especially compact structure of granular sludge. A 70% of anammox bacteria percentage was identified by fluorescence in situ hybridization analysis.     

Rapid acclimation of methanogenic granular sludge into denitrifying sulfide removal granules

Rapid formation of denitrifying sulfide removal granules is of practical interest to start up an expanded granular sludge bed reactor for wastewater treatment. This study demonstrates that methanogenic granules can be easily acclimated into DSR granules in one day, removing all 1.30 kg m⁻³ d⁻¹ sulfide and converting >90% of 0.56 kg-N m⁻³d⁻¹ nitrate into di-nitrogen gas. Under high loadings, reactor performance, however, declined. Under high loading rates, sulfide first inhibited the heterotrophic denitrifier (Caldithrix sp.), thereby accumulating nitrite in the system; the autotrophic denitrifier (Pseudomonas sp. C23) was then inhibited by accumulated nitrite, leading to breakdown of the entire DSR process.     

High-rate nitrogen removal by the Anammox process at ambient temperature

The purpose of this study is to investigate the nitrogen removal performance of the anaerobic ammonium oxidation (Anammox) process and the microbial community that enables the Anammox system to function well at ambient temperatures. A reactor with a novel spiral structure was used as the gas-solid separator. The reactor was fed with synthetic inorganic wastewater composed mainly of NH₄⁺-N and NO₂⁻-N, and operated for 92 days. Stable nitrogen removal rates (NRR) of 16.3 and 17.5 kg-N m⁻³ d⁻¹ were obtained at operating temperatures of 33 ± 1 and 23 ± 2 °C, respectively. To our knowledge, such a high NRR at ambient temperatures has not been reported previously. In addition, the experiments presented herein confirm that high influent NO₂⁻-N concentration of 460 mg L⁻¹ did not noticeably inhibit the Anammox activity. Furthermore, the freshwater Anammox bacterium KU2, which was identified as the dominant bacterial species in the consortium by 16S rRNA gene analysis, is considered to be responsible for the stable nitrogen removal performance at ambient temperatures.     

Characteristics of nitrogenous substrate conversion by anammox enrichment

The characteristics of nitrogenous substrates conversion by anammox enrichment were investigated using batch experiments. The anammox enrichment was proved able to convert hydroxylamine to hydrazine, as well as convert hydrazine to ammonia anaerobically, with the average conversion rates of 0.207 and 0.031 mmol gVSS⁻¹ h⁻¹. It could convert hydroxylamine and nitrite simultaneously, with ammonia as an intermediate product. The maximum conversion rates of hydroxylamine and nitrite were 0.535 and 0.145 mmol gVSS⁻¹ h⁻¹, respectively. Their conversion rates were enhanced by 26.7% and 120.7%, respectively, by raising the ratio of hydroxylamine to nitrite from 1:1 to 2:1. The characteristics of nitrogenous substrate conversion by anammox enrichment could be explained using the speculative anammox pathway based on van de Graaf model.     

Application of low intensity ultrasound to enhance the activity of anammox microbial consortium for nitrogen removal

In this study, effect of low intensity ultrasound on the activity of anammox microbial consortium for nitrogen removal was investigated through batch experiments at the same irradiation frequency of 25 kHz. Total nitrogen removal rate increased by about 25.5% when ultrasound intensity of 0.3 w cm⁻² was applied at an optimal irradiation time of 4 min, and further experiments demonstrated that this effect could last for about 6 days. Analysis of extracellular polymeric substances indicated that the maximum increase of carbohydrate, protein and total extracellular substances was obtained on the first day after ultrasound, which was 28.8%, 30.5% and 29.7%, respectively. As the time prolonged, the production rate of extracellular carbohydrate, protein decreased gradually. Transmission electron microscopy observation demonstrated that ultrasounded cell wall of anammox microbial consortium became thinner resulting in increased release of extracellular substances. The results suggested that application of low intensity ultrasound may enhance the activity of anammox microbial consortium and ultimately the potential for nitrogen removal.     

Biodegradation of phenol using Corynebacterium sp. DJ1 aerobic granules

The single-culture Corynebacterium sp. DJ1 aerobic granules were cultivated and were utilized to degrade high-strength phenolic wastewater. These granules can degrade phenol at sufficient high rate without severe inhibitory effects up to phenol concentration of 2000 mg l⁻¹. Furthermore, the kinetic characteristic noted for these granules yields a zero-order phenol degradation behavior with 500–1500 mg l⁻¹ phenol, which facilitates reactor design and scale up. With added acetate to promote cell growth, this single-culture aerobic granular system yields the highest phenol degradation rate reported in granular literature.     

Expediting COD removal in microbial electrolysis cells by increasing biomass concentration

Microorganisms catalyse the reaction and in this study, mainly the effect of different concentration of biomass on COD removal was investigated. Three sets of two-compartment reactors were established. The cation exchange membrane (CEM) was employed in each reactor and 0.5 V of electricity was supplied. Graphite rod employed in cathodic part and a combination of graphite rod and graphite granules were used in anodic chamber. The highest rate of COD removal (40 ± 2.0 ppm/h) was achieved in the reactor which had initial VSS at 6130 mg/l, whereas the slowest rate of 23 ± 1.2 ppm/h in the reactor started with 3365 mgVSS/l. Some ammonia removal was also noticed during the operation. Further understanding and improvement is needed to be competitive against traditional wastewater treatment processes.     

Rapid startup and high rate nitrogen removal from anaerobic sludge digester liquor using a SNAP process

In this study, a single-stage autotrophic nitrogen removal reactor, packed with a novel acrylic fiber biomass carrier material (Biofix), was applied for nitrogen removal from sludge digester liquor. For rapid start-up, conventional activated sludge was added to the reactor soon after the attachment of anammox biomass on the Biofix carriers, which allowed conventional activated sludge to form a protective layer of biofilm around the anammox biomass. The Nitrogen removal efficiency reached 75% within 1 week at a nitrogen loading rate of 0.46 kg-N/m³/day for synthetic wastewater treatment. By the end of the synthetic wastewater treatment period, the maximum nitrogen removal rate had increased to 0.92 kg-N/m³/day at a nitrogen loading rate of 1.0 kg-N/m³/day. High nitrogen removal rate was also achieved during the actual raw digester liquor treatment with the highest nitrogen removal rate being 0.83 kg-N/m³/day at a nitrogen loading rate of 0.93 kg-N/m³/day. The thick biofilm on Biofix carriers allowed anammox bacteria to survive under high DO concentration of 5–6 mg/l resulting in stable and high nitrogen removal performance. FISH and CLSM analysis demonstrated that anammox bacteria coexisted and surrounded by ammonium oxidizing bacteria.     

Anaerobic ammonium oxidation process in an upflow anaerobic sludge blanket reactor with granular sludge selected from an anaerobic digestor

The purpose of this work was to evaluate the development of the anammox process by the use of granular sludge selected from a digestion reactor as a potential seed source in a lab-scale UASB (upflow anaerobic sludge blanket) reactor system. The reactor was operated for approximately 11 months and was fed by synthetic wastewater. After 200 days of feeding with NH₄ ⁺ and NO₂ ⁻ as the main substrates, the biomass showed steady signs of ammonium consumption, resulting in over 60% of ammonium nitrogen removal. This report aims to present the results and to more closely examine what occurs after the onset of anammox activity, while the previous work described the start-up experiment and the presence of anammox bacteria in the enriched community using the fluorescencein situ hybridization (FISH) technique. By the last month of operation, the consumed NO₂ ⁻N/NH₄ ⁺-N ratio in the UASB reactor was close to 1.32, the stoichiometric ratio of the anammox reaction. The obtained results from the influentshutdown test suggested that nitrite concentration would be one key parameter that promotes the anammox reaction during the start-up enrichment of anammox bacteria from granular sludge. During the study period, the sludge color gradually changed from black to red-brownish.