时间分辩荧光分析法在DNA探针检测中的初步应用

应用时间分辨荧光技术进行核酸杂交分析,选用自制螯合剂异硫氰酸苯基ＥＤＴＡ将希有铕离子标中接于链霉亲和素分子中,通过光化学反应制备生物系标记ＰＵＣ１１８ＤＮＡ探针,与固定在聚苯乙烯微滴板中的靶ＤＮＡ杂交后,以铕离子Ｅｕ＾３＋标边霉亲和素为检测物,检测靶ＤＮＡ的含量,可检测到３０ｐｇ的靶ＤＮＡ。     

应用肽核酸探针检测鼠疫耶尔森氏菌

目的:利用特异的肽核酸(PNA)探针、链霉亲和素包被的磁珠和cy5纳米颗粒,通过荧光扫描技术,建立一种特异、快速、准确地检测鼠疫耶尔森氏菌的方法。方法:针对鼠疫耶尔森氏菌pMT1质粒上的caf1基因设计并合成一对特异PNA探针,经生物素标记后,分别与链霉亲和素包被的磁珠和cy5纳米颗粒结合;将探针与待测鼠疫耶尔森氏菌的基因组DNA杂交后,利用荧光扫描技术进行检测。探讨了多个实验因素对测定的影响,并进行了特异性和灵敏度检测。结果:建立并优化了利用PNA探针检测鼠疫耶尔森氏菌的方法,得到较好的线性关系;检测的灵敏度为0.9μg/mL(待测DNA)。结论:PNA探针与靶基因的结合不易受杂交液离子强度的影响,结合后具有较高的稳定性。本研究建立的分析方法能够灵敏、特异、稳定地对鼠疫耶尔森氏菌进行定量检测,为鼠疫的监控、诊断提供了有力手段。     

应用纳米金探针检测HSV-2的目视化基因芯片

本实验建立了一种应用金标链霉亲和素探针的目视化高灵敏度检测单纯疱疹病毒2型(HerpesSimplexVirus-2,HSV-2)的基因芯片。该芯片以HSV-2DNA聚合酶的高保守区为靶序列,设计HSV-2特异性引物和探针,通过PCR反应使扩增产物标记上生物素;氨基修饰的探针固定在活化的玻片上,与生物素标记的扩增产物杂交;利用生物素与链酶亲和素高亲合力的特性,加入纳米金标记的链酶亲和素后形成生物素-链酶亲和素-纳米金生物反应放大系统;银染反应后,达到目视化检测HSV-2效果。该HSV-2检测基因芯片能目视化检测出100fmol/L的HSV-2扩增产物,具有灵敏度高,低成本的特点,通过临床标本验证表明该芯片具有较高的准确性。     

应用纳米金探针检测HSV-2的目视化基因芯片

本实验建立了一种应用金标链霉亲和素探针的目视化高灵敏度检测单纯疱疹病毒2型(Herpes Simplex Virus-2, HSV-2)的基因芯片.该芯片以HSV-2 DNA 聚合酶的高保守区为靶序列,设计HSV-2特异性引物和探针,通过PCR反应使扩增产物标记上生物素;氨基修饰的探针固定在活化的玻片上,与生物素标记的扩增产物杂交;利用生物素与链酶亲和素高亲合力的特性,加入纳米金标记的链酶亲和素后形成生物素-链酶亲和素-纳米金生物反应放大系统;银染反应后,达到目视化检测HSV-2效果.该HSV-2检测基因芯片能目视化检测出100fmol/L的HSV-2扩增产物,具有灵敏度高,低成本的特点,通过临床标本验证表明该芯片具有较高的准确性.     

PCR-微孔板杂交-ELISA法检测巨细胞病毒感染

建立PCR-微孔板杂交-ELISA法检测人血清标本中巨细胞病毒DNA.将5'端标记生物素的PCR扩增产物与5'端标记地高辛的探针呈液相混合,90℃ 2min,55℃,1min杂交.杂交后产物被链霉亲和素酶标板固定,经酶标记抗地高辛标记抗体结合显色.本试剂检测灵敏度为2.5×104 copies/mL,比传统PCR和ELISA敏度性高,特异性强,与单纯疱疹病毒Ⅰ型和Ⅱ型,风疹病毒、EB病毒、腺病毒核酸无交叉反应,批内CV为8.9%,批间CV为10.5%.该法可用于定性和定量检测HCMV DNA.     

PCR-微孔板杂交-ELISA法检测巨细胞病毒感染

建立PCR-微孔板杂交-ELISA法检测人血清标本中巨细胞病毒DNA。将5’端标记生物素的PCR扩增产物与5’端标记地高辛的探针呈液相混合,90℃ 2min,55℃,1min杂交。杂交后产物被链霉亲和素酶标板固定,经酶标记抗地高辛标记抗体结合显色。本试剂检测灵敏度为2.5×104 copies/mL,比传统PCR和ELISA敏度性高,特异性强,与单纯疱疹病毒Ⅰ型和Ⅱ型,风疹病毒、EB病毒、腺病毒核酸无交叉反应,批内CV为8.9%,批间CV为10.5%。该法可用于定性和定量检测HCMV DNA。     

10种常见细菌基因检测膜条的研制

以16S rRNA基因为检测靶基因,设计10种常见细菌的DNA探针,将探针固定于硝酸纤维素膜条;PCR扩增细菌的16S rRNA基因片段并标记生物素后与膜条杂交;采用碱性磷酸酶标记的链亲和素检测生物素标记,以NBT/BCIP显色。该膜条不仅能单独检测10种细菌中的任何一种,也能同时检测5种细菌。该方法具备高通量、低成本、快速、准确等特点,具有良好的临床应用前景。     

酪胺信号放大-量子点标记银染增强的基因芯片可视化检测方法的建立

目的:建立一种酪胺信号放大-量子点标记银染增强的基因芯片可视化检测方法,提高基因芯片检测的灵敏度。方法:待测靶基因与固定在玻片上的探针杂交,依次加入链霉亲和素标记的辣根过氧化物酶、生物素标记的酪胺及链霉亲和素标记的量子点,37℃孵育,然后加入银增强试剂显色,最后用可视化生物芯片扫描仪扫描并记录结果;以牛布鲁菌210105株为检测对象,以酪胺信号放大-荧光素Cy3(TSA-Cy3)检测法为对照方法,测定酪胺信号放大-量子点标记银染增强(TSA-QDS)检测法的灵敏度。结果:确定了基因芯片量子点标记银染增强可视化检测方法的检测流程,优化了检测条件,并考察了检测灵敏度。优化的检测条件为:酪胺-生物素稀释比例为1∶4000,链酶亲和素标记的量子点稀释比例为1∶50,37℃孵育时间为25~30 min,银染增强时间为6~7 min。检测牛布鲁菌的灵敏度为103CFU/mL。结论:该方法实现了基因芯片高灵敏度可视化检测,其灵敏度与荧光法相当,并且有可视化的优势。     

基于纳米金复合探针的基因芯片膜转印检测法

建立了一种基于纳米金复合探针的基因芯片膜转印核酸检测新方法。首先,用纳米金颗粒同时标记检测探针P2和两种长短不同且生物素化的信号探针 (T10,T40),其中检测探针与靶DNA 5￠端互补,两种信号探针起信号放大作用。当靶DNA分子存在时,芯片表面捕捉探针P1 (与靶DNA分子3￠端互补) 通过碱基互补配对原则结合靶DNA分子,将其固定于芯片上,同时检测探针通过与靶DNA 5￠端互补配对将纳米金复合探针结合于芯片表面,结果在芯片表面形成“三明治”结构,后通过链霉亲和素-生物素反应,使芯片表面对应有靶DNA分子的部位结合上碱性磷酸酶,最后利用BCIP/NBT显色系统使芯片表面信号结果镜面转印至尼龙膜表面。当检测探针和信号探针摩尔比为1∶10,T10和T40摩尔比为9:1时可以检测1 pmol/L合成靶DNA分子或0.23 pmol/L结核分枝杆菌16S rDNA PCR扩增产物,检测结果通过普通的光学扫描仪读取或肉眼直接判读信号有无。本芯片检测系统灵敏度高,操作方法简单、快速,不需要特殊仪器设备,在生物分子的检测方面具有较高的应用价值。     

HIV-1整合酶链转移反应抑制剂的荧光筛选方法

整合酶被认为是抗HIV-1药物研究的理想靶点之一。为了建立便捷高效的整合酶链转移反应抑制剂筛选方法,首先将HIV-1整合酶原核表达载体pNL-IN转化入大肠杆菌感受态细胞BL21(DE3)进行原核表达,并用镍琼脂糖凝胶进行亲和纯化,获得了纯度和活性均较高的整合酶重组蛋白;然后设计了生物素标记的供体DNA和FITC标记的靶DNA,用链霉亲和素磁珠捕获反应体系中的DNA产物;最后用荧光分析仪检测DNA产物的荧光信号,并计算待测样品的抑制率。用已知整合酶抑制剂S-1360和MK-0518对筛选方法进行了验证,测定结果与已有实验数据相当,表明本筛选方法能够有效应用于HIV-1整合酶链转移反应抑制剂的筛选。与现有的整合酶链转移反应抑制剂筛选方法相比,本筛选方法步骤更为简化、耗时更短、成本更低。     

Time-resolved fluorometry: a sensitive method to quantify DNA-hybrids.

Europium and other lanthanides can be excitated with UV-radiation, whereafter the energy is released as fluorescence, delayed in time up to 1 ms after the excitation. Eu can be used as a sensitive label in biological assays. Here we report on the application of time-resolved fluorometry to detect nucleic acid hybrids. The probe DNA was tagged with a hapten, either a fluorene or a sulfone group. After hybridization the probe DNA was detected by a two-step immunological assay with the second antibody labelled with Eu. The method is quantitative with a detection limit of 0.3 pg of actual target regions of immobilized adenovirus genomic DNA. The label was also used in sandwich hybridization, which allowed analyzing nasopharyngeal mucus for the presence of adenovirus.     

Detection of biotinylated DNA probes by using Eu-labeled streptavidin and time-resolved fluorometry

Europium has been used as a label in immunoassays as it can be measured with high sensitivity by means of time-resolved fluorometry. Here we have used streptavidin labeled with europium chelates in the detection of adenovirus type 2 DNA bound to microtiter wells after hybridization with a biotinylated probe. The method gave quantitative results and a sensitivity of about 10 pg of the specific DNA.     

Simultaneous detection of IFN-gamma and IL-4 mRNAs using RT-PCR and time-resolved fluorometry

Time-resolved fluorometry was applied in the detection of RT-PCR amplified mRNAs for the Th1 and Th2 cell-derived cytokines interferon gamma (IFN-gamma) and interleukin (IL-)4, respectively. RNA stimulated cells was reverse transcribed and the cDNAs for the cytokine mRNAs and the constantly expressed beta-actin (beta-ACT) mRNA were simultaneously amplified in one multiplex PCR reaction. The PCR conditions were optimized to minimize mutual inhibition of individual amplifications. One of the PCR primers in each primer pair was biotinylated, and the PCR products were captured onto streptavidin-coated microtitre plates. The three PCR products were detected with three different lanthanide labelled target-specific probes in solution hybridization. IFN-gamma, IL-4 and beta-ACT were detected with europium (Eu), terbium (Tb) and samarium (Sm) labelled probes, respectively, using time-resolved fluorometry. Small cell numbers used in microtitre plate cultures were sufficient to detect cytokine messages after mitogen stimulation. This sequence-based method provides a sensitive, specific, fast and nonisotopic alternative to conventional blotting and hybridisation with radioactive probes. In addition, the multiplex fluorogenic dye detection facilitates relative quantification of target mRNAs.     

Sensitive non-radioactive dot-blot hybridization using DNA probes labelled with chelate group substituted psoralen and quantitative detection by europium ion fluorescence.

A new labelling method for cloned DNA probes used in hybridization assays is described. The DNA insert of recombinant plasmid DNA was made partially single-stranded for the labelling reaction by a restriction enzyme digest, followed by a controlled exonuclease III incubation. A thiol-containing psoralen derivative was covalently bound through irradiation with UV-light to the remaining double-stranded region of the plasmid DNA. The psoralen-SH groups were labelled with a large number of metal chelators (diethylentriamine pentaacetic acid, DTPA) using poly-L-lysine as a macromolecular carrier. The main advantage of the labelling procedure is that a high degree of labelling is achieved without modification of the single-stranded DNA hybridizing sequences. The specific hybrids were labelled after filter hybridization with europium ions through the chelating groups of DTPA. The europium ions were quantitatively detected by time-resolved fluorometry. The sensitivity of the assay for target DNA detection was in the low picogram range, comparable to radioactively labelled DNA probes.     

Preparation of europium-labelled DNA probes and their properties.

A chemical method for labelling DNA with a europium chelate is presented. First, primary aliphatic amino groups are introduced onto DNA in a transamination reaction. The transamination reaction is altered by adjusting temperature and duration of the reaction. Subsequently, the modified DNA is reacted with an isothiocyanate derivative of a Eu chelate. The optimum amount of Eu chelates on a DNA probe is 4-8% of total nucleotides. There is a decrease of 0.7 degrees C in the melting temperature of DNA for each incorporated Eu chelate on 100 bases. Hybridization efficiency is lowered by the introduction of Eu chelates but this effect can be partly overcome by using high DNA probe concentrations. The detection limit of the Eu-labelled probe is 0.15 attomoles of target DNA in a mixed-phase hybridization assay on microtitration wells. In addition to high sensitivity the Eu-labelled probes offer convenience in use and results which are quantitative and easy to interpret.     

Detection of Streptococcus pneumoniae DNA by using polymerase chain reaction and microwell hybridization with Europium-labelled probes

The present paper describes a novel modification of polymerase chain reaction (PCR) for the detection of Streptococcus pneumoniae DNA in clinical specimens. PCR was based on the detection of a 209-base pair segment of the S. pneumoniae pneumolysin gene. For the demonstration of the amplification product, microwell hybridization with a Europium-labelled oligonucleotide probe complementary to a biotinylated strand of the PCR product was performed, and the presence of the PCR product was monitored by time-resolved fluorescence (TRF) of the Europium chelate. The sensitivity of the assay for purified S. pneumoniae DNA was 50 fg DNA corresponding to 20 genome equivalents of S. pneumoniae DNA. The efficiency of the hybridization step was monitored by using known amounts of synthetic target oligonucleotides as standards. Sensitivity of 3×10⁸ molecules per individual reaction well was achieved with a 30-min attachment time and a 3-h hybridization time.

Detection of PCR-amplified products by the microwell hybridization technique and TRF was compared to agarose gel electrophoresis in 50 middle ear fluid samples obtained from children with acute otitis media. The agarose gel and TRF detection methods identified all culture-positive samples, but both were also positive for 55% of the culture-negative samples. The results suggest that the detection of amplified PCR products by microwell hybridization using Europium-labelled oligonucleotides is a reliable method for the demonstration of the pneumolysin gene fragment. Furthermore, the method is suitable for automation and, thus, for testing high numbers of samples. The clinical significance of the PCR findings remains to be studied.     

Homogeneous time-resolved fluorescence DNA hybridization assay by DNA-mediated formation of an EDTA-Eu(III)-beta-diketonate ternary complex.

A sensitive homogenous time-resolved fluorescence DNA hybridization assay method based on the formation of an EDTA-Eu(3+)-beta-diketonate ternary complex in the DNA hybrid was developed. The new approach combined the use of two DNA probes whose sequences compose the whole complementary strand to the target DNA, in which one probe was labeled with an EDTA-Eu(3+) complex on the 5'-terminus and the other, labeled with a bidentate beta-diketone on the 3'-terminus. After hybridization of two DNA probes with target DNA, EDTA-Eu(3+) and beta-diketone come close to each other, and an EDTA-Eu(3+)-beta-diketonate ternary complex with a strong and long-lived fluorescence was formed; thus the target DNA was detected sensitively with a detection limit of 6 pM (0.6 fmol per assay) by time-resolved fluorescence measurement. In the absence of the target DNA, due to the poor stability of bidentate beta-diketonate-Eu(3+) complex in very diluted solution, only a small amount of ternary fluorescence complex was formed.     

Label-free and high-sensitive detection of Salmonella using a surface plasmon resonance DNA-based biosensor

A method based on surface plasmon resonance (SPR) DNA biosensor has been developed for label-free and high-sensitive detection of Salmonella. A biotinylated single-stranded oligonucleotide probe was designed to target a specific sequence in the invA gene of Salmonella and then immobilized onto a streptavidin coated dextran sensor surface. The invA gene was isolated from bacterial cultures and amplified using a modified semi-nested asymmetric polymerase chain reaction (PCR) technique. In order to investigate the hybridization detection, experiments with different concentration of synthetic target DNA sequences have been performed. The calibration curve of synthetic target DNA had good linearity from 5 nM to 1000 nM with a detection limit of 0.5 nM. The proposed method was applied successfully to the detection of single-stranded invA amplicons from three serovars of Salmonella, i.e., Typhimurium, Enterica and Derby, and the responses to PCR products were related to different S. typhimurium concentrations in the range from 10(2) to 10(10) CFU mL(-1). While with this system to detect E. coli and S. aureus, no significant signal was observed, demonstrating good selectivity of the method. In addition, the hybridization can be completed within 15 min, and the excellent sensor surface regeneration allows at least 300 assay cycles without obvious loss of performance.     

DNA hybridization biosensors using polylysine modified SPCEs

Two electrochemical DNA hybridization biosensors (genosensors) for the detection of a 30-mer sequence unique to severe acute respiratory syndrome (SARS) virus are described in this work. Both genosensors rely on the hybridization of the oligonucleotide target with its complementary probe, which is immobilized on positively charged polylysine modified screen-printed carbon electrodes (SPCEs), through electrostatic interactions. In one design, a biotinylated target is used and the detection of the hybridization reaction is monitored using alkaline phosphatase labeled streptavidin (S-AP). This enzyme catalyzes the hydrolysis of the substrate 3-indoxyl phosphate (3-IP) to indigo, which is then solubilized to indigo carmine and detected by means of cyclic voltammetry (CV). In the other design, the target is labeled using an Au(I) complex, sodium aurothiomalate, and the duplex formation is detected by measuring, for first time, the current generated by the hydrogen evolution catalyzed by the gold label. Using 30 min of hybridization time, a detection limit of 8 pM is calculated for the enzymatic genosensor. Although this good sensitivity cannot be reached with the metal label (0.5 nM), the use of this label allows a considerable decrease of the analysis time. Both genosensors do not require the modification of the oligonucleotide probe and using stringent experimental conditions (60 min of hybridization time and 50% formamide in the hybridization buffer) can discriminate between a complementary oligonucleotide and an oligonucleotide with a three-base mismatch.     

Solid-phase time-resolved fluorescence detection of human immunodeficiency virus polymerase chain reaction amplification products.

A new assay system for the detection of polymerase chain reaction (PCR) amplification products is presented. This single-pot sandwich assay system employs solid-support oligonucleotide-coated capture beads, a rare earth metal chelate-labeled probe, and a time-resolved fluorescence detection. The new assay system was evaluated for various reaction conditions including, DNA denaturation time, hybridization salt concentration, probe concentration, and hybridization time, all of which are important in designing an assay with a high level of sensitivity for the detection of duplex DNA. This nonisotopic assay system was applied to the detection of purified human immunodeficiency virus (HIV) DNA and sensitivity was compared with agarose gel electrophoresis and slot blot hybridization using a 32P-labeled probe. We were able to detect the amplified product from one copy of HIV DNA after 35 cycles of PCR amplification in less than 30 min using this assay, which compared with one copy by gel electrophoresis after 40 cycles of PCR amplification and one copy by slot blot hybridization after 35 cycles of PCR amplification and an overnight exposure of the autoradiogram. Thus, this assay is rapid, sensitive, and easy to use.