Effective recovery of poly‐β‐hydroxybutyrate (PHB) biopolymer from Cupriavidus necator using a novel and environmentally friendly solvent system

This work demonstrates a significant advance in bioprocessing for a high‐melting lipid polymer. A novel and environmental friendly solvent mixture, acetone/ethanol/propylene carbonate (A/E/P, 1:1:1 v/v/v) was identified for extracting poly‐hydroxybutyrate (PHB), a high‐value biopolymer, from Cupriavidus necator. A set of solubility curves of PHB in various solvents was established. PHB recovery of 85% and purity of 92% were obtained from defatted dry biomass (DDB) using A/E/P. This solvent mixture is compatible with water, and from non‐defatted wet biomass, PHB recovery of 83% and purity of 90% were achieved. Water and hexane were evaluated as anti‐solvents to assist PHB precipitation, and hexane improved recovery of PHB from biomass to 92% and the purity to 93%. A scale‐up extraction and separation reactor was designed, built and successfully tested. Properties of PHB recovered were not significantly affected by the extraction solvent and conditions, as shown by average molecular weight (1.4 × 10⁶) and melting point (175.2°C) not being different from PHB extracted using chloroform. Therefore, this biorenewable solvent system was effective and versatile for extracting PHB biopolymers. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:678–685, 2016     

Comparison of different solvents for extraction of polyhydroxybutyrate from Cupriavidus necator

Polyhydroxybutyrate (PHBs) have attracted much attention due to their biodegradability and biocompatibility properties. The main drawback to the commercial production of them is their high cost. The recovery of PHB from bacterial cytoplasm significantly increases total processing costs. Efficient, economical, and environment‐friendly extraction of PHB from cells is required for its industrial production. In the present study, several nonhalogenated organic solvents (ethylene carbonate, dimethyl sulfoxide, dimethyl formamide, hexane, propanol, methanol, and acetic acid) were examined for their efficacy regarding recovery at different temperatures from culture broth containing Cupriavidus necator cells. The highest recovery percentage (98.6%) and product purity (up to 98%) were seen to be those of ethylene carbonate‐assisted extraction at 150°C within 60 min of incubation time. Average molecular weight of the recovered PHB (1.3 × 10⁶) was not significantly affected by the extraction solvent and conditions. The melting point of PHB extracted using ethylene carbonate was measured to be 176.2°C with an enthalpy of fusion of 16.8% and the corresponding degree of crystallinity of 59.2%. NMR and GC analyses confirmed that the extracted biopolymer was PHB. The presented strategy can help researchers to reduce the cost to obtain the final product.     

Extraction of poly-3-hydroxybutyrate using chlorinated solvents

Summary Recovery of poly-3-hydroxybutyrate (PHB) in three chlorinated solvents with or without acetone pretreatment and degradation of extracted PHB (99% pure) in hot chloroform were studied. When lyophilized Alcaligenes eutrophus biomass was used, the best results were obtained with acetone pretreatment and solvent reflux for 15 min in methylene chloride or chloroform. Recovered PHB had a 95% purity and molecular weights (M_w) of 1,050,000 and 930,000 g/mol respectively. Further heating resulted in a serious M_w, loss at reflux temperatures. Degradation of extracted PHB at 110°C in chloroform was due to random and chain-end scission, the former being predominant.     

Hypochlorite digestion method for efficient recovery of PHB from <Emphasis Type="Italic">Alcaligenes faecalis</Emphasis>

We reported the optimum amount of PHB accumulated by Alcaligenes faecalis during its 24 h growth under nitrogen deficient conditions. After 24 h incubation decrease in the amount of PHB was recorded. Hypochlorite digestion of biomass of organism followed by extraction with a solvent system consisting of 1:1 mixture of ethanol and acetone resulted in efficient recovery of PHB vis-à-vis earlier methods. This solvent system gave a high recovery yield, i.e. 5.6 gL⁻¹ vis-à-vis earlier reported yield, 1.34 gL⁻¹ (by same method), 0.63 gL⁻¹ (by chloroform extraction method) and 1.1 gL⁻¹ (by dispersion method).     

Recovery of polyhydroxybutyrate (PHB) from Cupriavidus necator biomass by solvent extraction with 1,2‐propylene carbonate

An integrated procedure for the recovery of polyhydroxybutyrate (PHB) produced by Cupriavidus necator based on the extraction with 1,2‐propylene carbonate was evaluated. The effect of temperature (100–145°C) and contact time (15–45 min), precipitation period, and biomass pretreatments (pH shock and/or thermal treatments) on PHB extraction efficiency and polymer properties was evaluated. The highest yield (95%) and purity (84%) were obtained with the combination of a temperature of 130°C and a contact time of 30 min, with a precipitation period of 48 h. Under these conditions, PHB had a molecular weight of 7.4×10⁵, which was the highest value obtained. Lower values (2.2×10⁵) were obtained for higher temperatures (145°C), while lower temperatures resulted in incomplete extraction yields (45–54%). No further yield improvement was achieved with the pH/heat pretreatments, but the polymer's molecular weight was increased to 1.3×10⁶. The PHB physical properties were not significantly affected by any of the tested procedures, as shown by the narrow ranges obtained for the glass transition temperature (4.8–5.0°C), melting temperature (170.1–180.1°C), melting enthalpy (77.8–88.5 J/g) and crystallinity (55–62%). 1,2‐Propylene carbonate was shown to be an efficient solvent for the extraction of PHB from biomass. The precipitation procedure was found to highly influence the polymer recovery and its molecular weight. Although polymer molecular weight and purity were improved by applying pH/heat pretreatment to the biomass, the procedure involves the use of large amounts of chemicals, which increases the recovery costs and makes the process environmentally unfriendly.     

Production and characterization of poly‐3‐hydroxybutyrate from biodiesel‐glycerol by Burkholderia cepacia ATCC 17759

Glycerol, a byproduct of the biodiesel industry, can be used by bacteria as an inexpensive carbon source for the production of value‐added biodegradable polyhydroxyalkanoates (PHAs). Burkholderia cepacia ATCC 17759 synthesized poly‐3‐hydroxybutyrate (PHB) from glycerol concentrations ranging from 3% to 9% (v/v). Increasing the glycerol concentration results in a gradual reduction of biomass, PHA yield, and molecular mass (M_n and M_w) of PHB. The molecular mass of PHB produced utilizing xylose as a carbon source is also decreased by the addition of glycerol as a secondary carbon source dependent on the time and concentration of the addition. ¹H‐NMR revealed that molecular masses decreased due to the esterification of glycerol with PHB resulting in chain termination (end‐capping). However, melting temperature and glass transition temperature of the end‐capped polymers showed no significant difference when compared to the xylose‐based PHB. The fermentation was successfully scaled up to 200 L for PHB production and the yield of dry biomass and PHB were 23.6 g/L and 7.4 g/L, respectively. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Zobellella denitrificans strain MW1, a newly isolated bacterium suitable for poly(3-hydroxybutyrate) production from glycerol

Aims: To search for new bacteria for efficient production of polyhydroxyalkanoates (PHAs) from glycerol. Methods and Results: Samples were taken from different environments in Germany and Egypt, and bacteria capable of growing in mineral salts medium with glycerol as sole carbon source were enriched. From a wastewater sediment sample in Egypt, a Gram‐negative bacterium (strain MW1) was isolated that exhibited good growth and that accumulated considerable amounts of polyhydroxybutyrate (PHB) from glycerol and also from other carbon sources. The 16S rRNA gene sequence of this isolate exhibited 98·5% and 96·2% similarity to Zobellella denitrificans strain ZD1 and to Zobellella taiwanensis strain ZT1 respectively. The isolate was therefore affiliated as strain MW1 of Z. denitrificans. Strain MW1 grows optimally on glycerol at 41°C and pH 7·3 and accumulated PHB up to 80·4% (w/w) of cell dry weight. PHB accumulation was growth‐associated. Although it was not an absolute requirement, 20 g l^?1 sodium chloride enhanced both growth (5 g cell dry weight per litre) and PHB content (87%, w/w). Zobellella denitrificans strain MW1 is also capable to accumulate the poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymer if sodium propionate was used as cosubstrate in addition to glycerol. Conclusions: A new PHB‐accumulating strain was isolated and identified. This strain is able to utilize glycerol for growth and PHB accumulation to high content especially in the presence of NaCl that will enable the utilization of waste glycerol from biodiesel industry. Significance and Impact of the Study: This study is the first report on accumulation of PHA in a member of the new genus Zobellella. Furthermore, utilization of glycerol as the sole carbon source for fast growth and PHB biosynthesis, growth in the presence of NaCl and high PHB contents of the cells will make this newly isolated bacterium a potent candidate for industrial production of PHB from crude glycerol occurring as byproduct during biodiesel production.     

Recovery of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) from Ralstonia eutropha cultures with non‐halogenated solvents

Reduced downstream costs, together with high purity recovery of polyhydroxyalkanoate (PHA), will accelerate the commercialization of high quality PHA‐based products. In this work, a process was designed for effective recovery of the copolymer poly(hydroxybutyrate‐co‐hydroxyhexanoate) (P(HB‐co‐HHx)) containing high levels of HHx (>15 mol%) from Ralstonia eutropha biomass using non‐halogenated solvents. Several non‐halogenated solvents (methyl isobutyl ketone, methyl ethyl ketone, and butyl acetate and ethyl acetate) were found to effectively dissolve the polymer. Isoamyl alcohol was found to be not suitable for extraction of polymer. All PHA extractions were performed from both dry and wet cells at volumes ranging from 2 mL to 3 L using a PHA to solvent ratio of 2% (w/v). Ethyl acetate showed both high recovery levels and high product purities (up to 99%) when using dry cells as starting material. Recovery from wet cells, however, eliminates a biomass drying step during the downstream process, potentially saving time and cost. When wet cells were used, methyl isobutyl ketone (MIBK) was shown to be the most favorable solvent for PHA recovery. Purities of up to 99% and total recovery yields of up to 84% from wet cells were reached. During polymer recovery with either MIBK or butyl acetate, fractionation of the extracted PHA occurred, based on the HHx content of the polymer. PHA with higher HHx content (17–30 mol%) remained completely in solution, while polymer with a lower HHx content (11–16 mol%) formed a gel‐like phase. All PHA in solution could be precipitated by addition of threefold volumes of n‐hexane or n‐heptane to unfiltered PHA solutions. Effective recycling of the solvents in this system is predicted due to the large differences in the boiling points between solvent and precipitant. Our findings show that two non‐halogenated solvents are good candidates to replace halogenated solvents like chloroform for recovery of high quality PHA. Biotechnol. Bioeng. 2013; 110: 461–470. © 2012 Wiley Periodicals, Inc.     

The effects of Paraloid B‐72 and Butvar B‐98 treatment and organic solvent removal on δ13C, δ15N,and δ18O values of collagen and hydroxyapatite in a modern bone

Stable isotopes in bones are a powerful tool for diet, provenance, climate, and physiological reconstructions, but necessarily require well‐preserved specimens unaltered by postmortem diagenesis or conservation practices. This study examines the effects of Paraloid B‐72 and Butvar B‐98, two common consolidants used in field and museum conservation, on δ¹³C, δ¹⁵N, and δ¹⁸O values from bone collagen and hydroxyapatite. The effects of solvent removal (100% acetone, 100% ethanol, 9:1 acetone:xylenes, 9:1 ethanol:xylenes) and drying methods (ambient air, vacuum, oven drying at 80°C) were also examined to determine if bones treated with these consolidants can successfully be cleaned and used for stable isotope analyses. Results show that introduction of Paraloid B‐72 or Butvar B‐98 in 100% acetone or 100% ethanol, respectively, with subsequent removal by the same solvents and drying at 80°C facilitates the most successful removal of consolidants and solvents. The δ¹³C values in collagen, δ¹⁵N in collagen, δ¹⁸O in hydroxyapatite phosphate, and δ¹³C in hydroxyapatite structural carbonate were unaltered by treatments with Paraloid or Butvar and subsequent solvent removal. The δ¹⁸O in hydroxyapatite structural carbonate showed nonsystematic variability when bones were treated with Paraloid and Butvar, which is hypothesized to be a result of hydroxyl exchange when bones are exposed to consolidants in solution. It is therefore recommended that δ¹⁸O in hydroxyapatite structural carbonate should not be used in stable isotope studies if bones have been treated with Paraloid or Butvar. Am J Phys Anthropol 157:330–338, 2015. © 2015 Wiley Periodicals, Inc.     

Extraction of chlorophyll a from freshwater phytoplankton for spectrophotometric analysis

The efficiency of pigment extraction forms the crux of the spectrophotometric analysis of chlorophyll a. The alcoholic solvents, methanol and ethanol, proved to be superior to acetone and acetone with DMSO. Homogenisation and sonication did not improve the extraction in the alcoholic solvents. Boiling at 100°C had an adverse effect whereas complete extraction of the pigments was obtained at the solvents boiling point and allowing the samples to stand for 24 h in the dark.     

Peroxisomal polyhydroxyalkanoate biosynthesis is a promising strategy for bioplastic production in high biomass crops

Polyhydroxyalkanoates (PHAs) are bacterial carbon storage polymers with diverse plastic‐like properties. PHA biosynthesis in transgenic plants is being developed as a way to reduce the cost and increase the sustainability of industrial PHA production. The homopolymer polyhydroxybutyrate (PHB) is the simplest form of these biodegradable polyesters. Plant peroxisomes contain the substrate molecules and necessary reducing power for PHB biosynthesis, but peroxisomal PHB production has not been explored in whole soil‐grown transgenic plants to date. We generated transgenic sugarcane (Saccharum sp.) with the three‐enzyme Ralstonia eutropha PHA biosynthetic pathway targeted to peroxisomes. We also introduced the pathway into Arabidopsis thaliana, as a model system for studying and manipulating peroxisomal PHB production. PHB, at levels up to 1.6%–1.8% dry weight, accumulated in sugarcane leaves and A. thaliana seedlings, respectively. In sugarcane, PHB accumulated throughout most leaf cell types in both peroxisomes and vacuoles. A small percentage of total polymer was also identified as the copolymer poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in both plant species. No obvious deleterious effect was observed on plant growth because of peroxisomal PHA biosynthesis at these levels. This study highlights how using peroxisomal metabolism for PHA biosynthesis could significantly contribute to reaching commercial production levels of PHAs in crop plants.     

New insights in the formation of polyhydroxyalkanoate granules (carbonosomes) and novel functions of poly(3‐hydroxybutyrate)

The metabolism of polyhydroxybutyrate (PHB) and related polyhydroxyalkanoates (PHAs) has been investigated by many groups for about three decades, and good progress was obtained in understanding the mechanisms of biosynthesis and biodegradation of this class of storage molecules. However, the molecular events that happen at the onset of PHB synthesis and the details of the initiation of PHB/PHA granule formation, as well as the complex composition of the proteinaceous surface layer of PHB/PHA granules, have only recently come into the focus of research and were not reviewed yet. In this contribution, we summarize the progress in understanding the initiation and formation of the PHA granule complex at the example of Ralstonia eutropha H16 (model organism of PHB‐accumulating bacteria). Where appropriate, we include information on PHA granules of Pseudomonas putida as a representative species for medium‐chain‐length PHA‐accumulating bacteria. We suggest to replace the previous micelle mode of PHB granule formation by the Scaffold Model in which the PHB synthase initiation complex is bound to the bacterial nucleoid. In the second part, we highlight data on other forms of PHB: oligo‐PHB with ≈100 to 200 3‐hydroxybutyrate (3HB) units and covalently bound PHB (cPHB) are unrelated in function to storage PHB but are presumably present in all living organisms, and therefore must be of fundamental importance.     

Characterization of a thermally stable and organic solvent-adaptative NAD+ -dependent formate dehydrogenase from Bacillus sp. F1

Aims: To characterize a robust NAD⁺‐dependent formate dehydrogenase firstly obtained from a nonmethylotroph, Bacillus sp. F1. Methods and Results: The Bacillus sp. F1 NAD⁺‐dependent formate dehydrogenase (BacFDH) gene was cloned by TAIL‐PCR and heterologous expressed in Escherichia coli. BacFDH was stable at temperatures below 55°C, and the half‐life at 60°C was determined as 52·9 min. This enzyme also showed a broad pH stability and retained more than 80% of the activities after incubating in buffers with different pH ranging from 4·5 to 10·5 for 1 h. The activity of BacFDH was significantly enhanced by some metal ions. Moreover, BacFDH exhibited high tolerance to 20% dimethyl sulfoxide, 60% acetone, 10% methanol, 20% ethanol, 60% isopropanol and 20% n‐hexane. Like other FDHs, BacFDH displayed strict substrate specificity for formate. Conclusion: We isolated a robust formate dehydrogenase, designated as BacFDH, which showed excellent thermal stability, organic solvent stability and a broad pH stability. Significance and Impact of the Study: The multi‐aspect stability makes BacFDH a competitive candidate for coenzyme regeneration in practical applications of chiral chemicals and pharmaceuticals synthesis with a relatively low cost, especially for the catalysis performed in extreme pH conditions and organic solvents.     

Production of acetone,butanol and ethanol (ABE) from potato wastes: fermentation with integrated membrane extraction

The technical possibilities of the microbial production of acetone, butanol and ethanol (ABE) from potato waste using in-line solvent recovery, are evaluated. Clostridium acetobutylicum DSM 1731 produces up to 20 g·l^–1 of solvents when grown on a medium containing 14% (w/v) potato powder. Using a polypropylene perstraction system and a oleyl alcohol/decane mixture as the extractant, the product yield (based on total solvents and potato dry weight) increased from 0.13 g·g^–1 to 0.23 g·g^–1. The recovery system worked well for 50 h, after which membrane fouling frustrated proper operation. In the second system a microfiltration step was incorporated whereas the solvents were extracted through a hydrophilic membrane using fatty acid methyl esters from sunflower oil as an extractant. This process configuration resulted in a comparable increase of ABE production. Correspondence to: G. Eggink     

Production and characterization of poly-β-hydroxybutyrate (PHB) polymer from Aulosira fertilissima

Biopolymers such as polyhydroxyalkanoates (PHAs) are a class of secondary metabolites with promising importance in the field of environmental, agricultural, and biomedical sciences. To date, high-cost commercial production of PHAs is being carried out with heterotrophic bacterial species. In this study, a photoautotrophic N₂-fixing cyanobacterium, Aulosira fertilissima, has been identified as a potential source for the production of poly-β-hydroxybutyrate (PHB). An accumulation up to 66% dry cell weight (dcw) was recorded when the cyanobacterium was cultured in acetate (0.3%) + citrate (0.3%)-supplemented medium against 6% control. Aulosira culture supplemented with 0.5% citrate under P deficiency followed by 5?days of dark incubation also depicted a PHB accumulation of 51% (dcw). PHB content of A. fertilissima reached up to 77% (dcw) under P deficiency with 0.5% acetate supplementation. Optimization of process parameters by response surface methodology resulted into polymer accumulation up to 85% (dcw) at 0.26% citrate, 0.28% acetate, and 5.58?mg?L^?1 K₂HPO₄ for an incubation period of 5?days. In the A. fertilissima cultures pre-grown in fructose (1.0%)-supplemented BG 11 medium, when subjected to the optimized condition, the PHB pool boosted up to 1.59?g?L^?1, a value ～50-fold higher than the control. A. fertilissima is the first cyanobacterium where PHB accumulation reached up to 85% (dcw) by manipulating the nutrient status of the culture medium. The polymer extracted from A. fertilissima exhibited comparable material properties with the commercial polymer. As compared with heterotrophic bacteria, carbon requirement in A. fertilissima for PHB production is lower by one order magnitude; thus, low-cost PHB production can be envisaged.     

Utilization of tannery solid waste for protease production by Synergistes sp. in solid‐state fermentation and partial protease characterization

Synergistes sp. DQ560074 produced a protease in submerged fermentation (SmF) at 400–420 U/mL and in solid‐state fermentation (SSF) at 745–755 U/g. The protease, which belongs to the aspartic protease class, was active over a wide range of pH (5–7) and at high temperatures (25–45°C). The protease is stable and active in various polar protic solvents (50% v/v) like ethanol, isopropanol, n–butanol, in polar aprotic solvents (50% v/v) like acetonitrile, and in non‐polar solvents (50% v/v) such as ethylacetate and toluene, but not in hydrophilic organic solvents (methyl alcohol and acetone). As far as we know, this is the first contribution to the production of a mesophilic protease with solvent stability in SSF using a proteinaceous solid waste.     

Effect of nutritional supplements on bio-plastics (PHB) production utilizing sugar refinery waste with potential application in food packaging

Abstract

Polyhydroxyalkanoates (PHAs) are intracellular carbon and energy storage reserve material stored by gram-negative bacteria under nutrient limitation. PHAs are best alternative biodegradable plastics (bio-plastics) due to their resemblance to conventional synthetic plastic. The present study investigated the synergistic effect of nutritional supplements (amino acid and vitamin) on the PHA production by Alcaligenes sp. NCIM 5085 utilizing a sugar refinery waste (cane molasses) under submerged fermentation process. Initially, the effect of individual factor on PHA yield was studied by supplementing amino acids (cysteine, isoleucine, and methionine), vitamin (thiamin), and cane molasses at varying concentration in the production medium. Further, the cultivation medium was optimized by varying the levels of cane molasses, methionine and thiamin using response surface methodology to enhance the PHA yield. The maximum PHA yield of 70.89% was obtained under the optimized condition, which was then scaled up on 7.5?L-bioreactor. Batch cultivation in 7.5?L-bioreactor under the optimized condition gave a maximum PHA yield and productivity of 79.26% and 0.312 gL^?1 h^?1, respectively. The PHA produced was subsequently characterized as PHB by FTIR. PHB extracted was of relatively high molecular weight and crystallinity index. DSC analysis gave T_g, T_m, and X_c of 4.2, 179?°C and 66%, respectively. TGA analysis showed thermal stability with maximized degradation occurring at 302?°C, which is above the melting temperature (179?°C) of the purified polymer. The extracted polymer, therefore, possessed desirable material properties to be used in food packaging.     

The use of an acetoacetyl‐CoA synthase in place of a β‐ketothiolase enhances poly‐3‐hydroxybutyrate production in sugarcane mesophyll cells

Engineering the production of polyhydroxyalkanoates (PHAs) into high biomass bioenergy crops has the potential to provide a sustainable supply of bioplastics and energy from a single plant feedstock. One of the major challenges in engineering C₄ plants for the production of poly[(R)‐3‐hydroxybutyrate] (PHB) is the significantly lower level of polymer produced in the chloroplasts of mesophyll (M) cells compared to bundle sheath (BS) cells, thereby limiting the full PHB yield‐potential of the plant. In this study, we provide evidence that the access to substrate for PHB synthesis may limit polymer production in M chloroplasts. Production of PHB in M cells of sugarcane is significantly increased by replacing β‐ketothiolase, the first enzyme in the bacterial PHA pathway, with acetoacetyl‐CoA synthase. This novel pathway enabled the production of PHB reaching an average of 6.3% of the dry weight of total leaf biomass, with levels ranging from 3.6 to 11.8% of the dry weight (DW) of individual leaves. These yields are more than twice the level reported in PHB‐producing sugarcane containing the β‐ketothiolase and illustrate the importance of producing polymer in mesophyll plastids to maximize yield. The molecular weight of the polymer produced was greater than 2 × 10⁶ Da. These results are a major step forward in engineering a high biomass C₄ grass for the commercial production of PHB.     

Improved polyhydroxybutyrate production by Saccharomyces cerevisiae through the use of the phosphoketolase pathway

The metabolic pathways of the central carbon metabolism in Saccharomyces cerevisiae are well studied and consequently S. cerevisiae has been widely evaluated as a cell factory for many industrial biological products. In this study, we investigated the effect of engineering the supply of precursor, acetyl‐CoA, and cofactor, NADPH, on the biosynthesis of the bacterial biopolymer polyhydroxybutyrate (PHB), in S. cerevisiae. Supply of acetyl‐CoA was engineered by over‐expression of genes from the ethanol degradation pathway or by heterologous expression of the phophoketolase pathway from Aspergillus nidulans. Both strategies improved the production of PHB. Integration of gapN encoding NADP⁺‐dependent glyceraldehyde‐3‐phosphate dehydrogenase from Streptococcus mutans into the genome enabled an increased supply of NADPH resulting in a decrease in glycerol production and increased production of PHB. The strategy that resulted in the highest PHB production after 100 h was with a strain harboring the phosphoketolase pathway to supply acetyl‐CoA without the need of increased NADPH production by gapN integration. The results from this study imply that during the exponential growth on glucose, the biosynthesis of PHB in S. cerevisiae is likely to be limited by the supply of NADPH whereas supply of acetyl‐CoA as precursor plays a more important role in the improvement of PHB production during growth on ethanol. Biotechnol. Bioeng. 2013; 110: 2216–2224. © 2013 Wiley Periodicals, Inc.     

Enhanced polyhydroxybutyrate (PHB) production via the coexpressed phaCAB and vgb genes controlled by arabinose PBAD promoter in Escherichia coli

Aim: To develop an approach to enhance polyhydroxybutyrate (PHB) production via the coexpressed phaCAB and vgb genes controlled by arabinose P_BAD promoter in Escherichia coli. Method and Results: The polyhydroxyalkanoates (PHAs) synthesis operon, (phaCAB), from Ralstonia eutropha was overexpressed under the regulation of the arabinose P_BAD promoter in Escherichia coli, and the vgb gene encoding bacterial haemoglobin from Vitreoscilla stercoraria (VHb) was further cloned at downstream of phaCAB to form an artificial operon. The cell dry weight (CDW), PHB content and PHB concentration were enhanced around 1·23‐, 1·57‐, and 1·93‐fold in the engineered cell harbouring phaCAB–vgb (SY‐2) upon 1% arabinose induction compared with noninduction (0% arabinose). Furthermore, by using a recombinant strain harbouring P_BAD promoter‐vgb along with native promoter‐phaCAB construction, the effect of vgb expression level on PHB biosynthesis was positive correlation. Conclusions: The results exploit the possibility to improve the PHB production by fusing the genes phaCAB–vgb from different species under the arabinose regulation system in E. coli. It also demonstrates that increase in VHb level enhances the PHB production. Significance and Impact of the Study: We were successful in providing a new coexpressed system for PHB synthesis in E. coli. This coexpressed system could be regulated by arabinose inducer, and is more stable and cheaper than other induced systems (e.g. IPTG). Furthermore, it could be applied in many biotechnology or fermentation processes.