ZrO2晶型对CO加氢制异丁烯反应影响的研究

不同晶型结构的ZrO₂在CO加氢制异丁烯反应中表现出不同的催化性能。尽管单斜相ZrO₂在合成气制异丁烯反应中具有最优异的催化性能,但是对于其异构化活性位仍缺乏深入认识。通过研究ZrO₂晶型结构对反应性能的影响差异,有利于深入认识ZrO₂催化剂上合成气制异丁烯反应的关键影响因素。因此,本研究制备了一系列不同晶型结构的ZrO₂催化剂,研究了它们在结构性质及催化CO加氢制异丁烯反应性能方面的差异。相对于四方相和无定型ZrO₂,在单斜相ZrO₂催化剂表面,有较多的配位不饱和的Zr位点和O位点。配位不饱和的Zr位点是CO吸附活化的位点,有利于CO的转化。而较多的不饱和配位的O位点,为异丁烯的生成提供了更多的碱性位。此外,在单斜相ZrO₂催化剂表面,配位不饱和的Zr位点和O位点的存在,抑制了电子向反应中生成的甲酸盐物种转移,因此,甲酸盐物种在催化剂表面吸附较弱,有利于CO加氢生成异丁烯。     

不同钼锆质量比MoO3-ZrO2复合氧化物的结构及催化活性研究

采用溶胶凝胶法制备介孔MoO₃-ZrO₂复合氧化物,考察MoO₃/ZrO₂的质量比对其晶相结构、比表面积、孔径以及形貌特征的影响。利用XRD、N₂吸附-脱附、SEM及FT-IR表征对所制得的复合氧化物进行分析。以FCC汽油馏分为原料,对MoO₃-ZrO₂经预硫化后制得的催化剂进行加氢脱硫评价。结果表明,含有MoO₃的ZrO₂与不含MoO₃的ZrO₂相比单斜相减少,主要以稳定的四方相存在。适当的提高MoO₃/ZrO₂的质量比有利于MoO₃-ZrO₂复合氧化物的比表面积和平均孔径的增大,但过大的质量比并不利于介孔的生长,并且有新的化合键和少量Zr(MoO₄)₂相产生。当MoO₃/ZrO₂的质量比为30%时,ZrO₂表面出现蠕虫状结构,此时脱硫率最高。由此,适当提高MoO₃/ZrO₂质量比可使催化剂的脱硫率升高。     

磁性纳米固体超强酸的合成、表征及性能

首次制备了SO₄^2-/Co_0.5Fe_2.5O₄-ZrO₂磁性固体超强酸,利用TEM,DTA,XRD和FTIR等手段研究了Co_0.5Fe_2.5O₄磁性基质对ZrO₂的粒子大小、晶化温度与结构的影响.考察了磁性固体超强酸的催化性能及催化剂的寿命、回收率和磁性.结果表明,引入Co_0.5Fe_2.5O₄磁性基质不但赋予催化剂以磁性,而且在固体超强酸形成过程中延迟了ZrO₂由四方晶相向单斜晶相的转变,有助于稳定样品表面的含硫物种,磁性固体超强酸对酯化反应具有较高的催化活性,可活化再生,并保持磁性.     

晶相可控的ZrO2纳米线的无卤制备及表征

采用无卤法制备晶相可控的ZrO₂纳米线. 通过静电纺丝法制备聚乙烯吡咯烷酮(PVP)与Zr(NO₃)₄的复合纤维; 再通过煅烧法在除去聚合物模板的同时制备ZrO₂纳米线. 采用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 傅里叶变换红外光谱(FTIR)仪及热重差热联用热分析仪(DSC-TGA)对材料的晶相结构、 形貌及热稳定性进行表征. 通过改变煅烧温度, 可以实现ZrO₂纳米材料形貌及晶相组成的调控.     

载体模板效应对氧化钯的热化学行为及其甲烷燃烧稳定性的影响

通过对PdO活性组分在单斜与四方型氧化锆载体上的热化学性质和催化活性进行比较性的研究显示, 单斜型ZrO₂的表面原子能够满足与PdO的结构适应性匹配条件, 它可以通过界面原子的取向附生作用对表面PdO物种聚集形态进行调控, 从而促进PdO组分在单位载体表面上的分散. 此外, 升降温循环过程的DTG分析还表明, 单斜载体模板在反复的氧化还原循环中逐渐将结晶型PdO加工成取向附生型PdO, 不断改善PdO物种的氧迁移性质, 促进了热还原钯物种在高温区的氧化再生. 这两种载体效应有效地抑制了甲烷燃烧反应在高温区的活性振荡, 增加了燃烧的稳定性与催化剂的反应耐受性. 四方ZrO₂晶相在载体内的掺杂将导致上述的载体效应受到明显抑制.     

ZrO2和Al2O3载体对Mo基催化剂上甲烷化反应性能的影响

通过共沉淀法制备了ZrO₂和Al₂O₃载体,采用等体积浸渍法制备了MoO₃质量分数为5%的Mo/ZrO₂和Mo/Al₂O₃催化剂,并用于甲烷化反应。在三种反应气氛下对两种预硫化的Mo基催化剂进行评价,发现ZrO₂载体均可显著促进甲烷化反应,同时能够促进水汽变换（WGS）反应。通过XRD、H₂-TPR、XPS和TEM等表征发现,两种载体上Mo物种的硫化程度以及暴露的活性位数量不同,从而导致两种催化剂上催化性能差异显著。与Mo/Al₂O₃相比,Mo/ZrO₂催化剂上的MoO₃更易被还原,硫化程度也更高,并且Mo⁴⁺的含量更高,Mo⁶⁺的含量更低。虽然ZrO₂载体上MoS₂尺寸较大,边位置的Mo比例有所降低,但是由于MoS₂沿ZrO₂颗粒表面弯曲生长,使得MoS₂基面成为反应的活性位;因此,Mo/ZrO₂催化剂在甲烷化与WGS反应中表现出更优异的催化性能。     

准气相反应法中煅烧温度对ZrO2微球结构特性的影响

采用新颖的准气相反应法, 合成出了球形度好、表面光滑的ZrO₂微球. 通过对产物的SEM, TEM和XRD表征, 研究了煅烧温度对ZrO₂球结构特性的影响. 结果表明: 经600～800 ℃煅烧后, 生长完好的ZrO₂球, 其显微结构为均匀多孔结构, 纳米晶粒呈花生样的长条形状; ZrO₂球的相由主要的立方相和少量的四方相组成.     

CoMo/ZrO2-Al2O3催化剂的制备及其加氢脱氧性能

以ZrOCl₂·6H₂O和Al₂(SO₄)₃为原料,采用超声波共沉淀法制得一系列不同ZrO₂质量分数的ZrO₂- Al₂O₃复合氧化物载体;并以该复合氧化物为载体,采用等体积浸渍法制得Co和Mo质量分数分别为6.0%和16.0%的CoMo/ZrO₂-Al₂O₃催化剂。BET、XRD、H₂-TPR和NH₃-TPD等表征结果表明,ZrO₂-Al₂O₃复合氧化物载体具有较高的比表面积与较大的孔容、孔径,随着复合载体中ZrO₂质量分数的增加,复合载体比表面积逐渐减小。ZrO₂-Al₂O₃复合载体能高度分散活性组分,钴钼负载量接近其在载体上的单层分散阈值。相比于CoMo/Al₂O₃,CoMo/ZrO₂-Al₂O₃催化剂具有较高的还原性能和较多的表面酸性活性中心,由此导致其在苯酚加氢脱氧(HDO)反应中,具有较高的加氢脱氧活性和苯选择性。
     

H2,CO和H2/CO在ZrO2催化剂上吸附行为研究

用insituFTIR法研究了H₂、CO及CO/H₂在ZrO₂表面的吸附行为.结果表明,H₂在ZrO₂表面吸附存在两种形态的羟基(即ZrOH和ZrOHZr),吸附温度增加,羟基数量增加.CO在200℃易与ZrO₂表面羟基作用形成甲酸盐物种,吸附温度升高时,该物种逐渐分解生成CO和ZrOH.当CO和H₂共存时,表面甲酸盐的量明显增加,并随温度增加,逐渐加氢形成甲氧基,最后生成甲烷.甲氧基的加氢过程较慢,所需反应温度也较高,被认为是CO加氢合成醇的速控步骤.     

制备条件对Ni/ZrO2-SiO2催化剂煤气甲烷化的影响

采用浸渍法制备了ZrO₂-SiO₂复合载体和Ni质量分数为6%的Ni/ZrO₂-SiO₂催化剂,考察了载体制备时浸渍溶液pH值、焙烧温度和催化剂制备时的焙烧温度对Ni/ZrO₂-SiO₂催化剂煤气甲烷化反应性能的影响。采用X射线衍射、程序升温还原和扫描电子显微镜等方法对催化剂进行了表征。结果表明,载体浸渍溶液pH值为8.0～9.0, 载体焙烧温度为550 ℃,催化剂焙烧温度为450 ℃时,Ni/ZrO₂-SiO₂催化剂在煤气甲烷化反应中显示了最优的催化性能,CO转化率100%,CO₂转化率1.8%,CH₄生成速率16.6 mmol/(h·g)。进一步表征发现,制备ZrO₂-SiO₂复合载体时,增大浸渍溶液的pH值有利于形成粒径较小的亚稳态四方晶相ZrO₂,可见四方晶相ZrO₂更有利于甲烷化反应;载体焙烧温度会影响到NiO粒径的大小和其在催化剂表面的分散,温度过高和过低都会导致NiO粒径大小的不适宜以及分散性的降低;催化剂焙烧温度过高则会导致NiO与载体间的相互作用减弱,NiO分散性降低。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.