不同加成数C60精氨酸衍生物的合成及其清除活性氧自由基的性能

通过控制反应配比, 首次合成了三种具有不同加成数目的水溶性C₆₀精氨酸衍生物, C₆₀[HNC(NH)NH(CH₂)₃CH(NH₂)COOH]_nH_n (n＝2, 6, 8). 采用FT-IR, UV, RF, ¹H NMR, ¹³C NMR, LC-MS, EA, 粒径分析, 透射电镜等手段对其结构进行了表征. 同时采用化学发光法考察了三种具有不同加成数目的C₆₀精氨酸衍生物对活性氧自由基(超氧阴离子O₂^－.及羟自由基•OH)清除能力, 结果表明, C₆₀精氨酸衍生物对活性氧自由基具有优良的清除能力, 且清除能力与加成基团供电效应、空间位阻及C₆₀精氨酸衍生物在水中的聚集形态等因素密切相关.     

6-氨基己酸及2-氨基乙磺酸C60加成物的合成及溶解性

水溶性Fullerenes (C₆₀)衍生物的制备对于C₆₀的生物学研究具有十分重要的意义. 氨基酸与C₆₀的胺化反应可得到水溶性的氨基酸C₆₀衍生物. 以C₆₀与过量6-氨基己酸或2-氨基乙磺酸(摩尔比为1∶10)于80 ℃搅拌反应24 h, 分别得到加成度为5和4的氨基酸C₆₀主产物, 产率按加入的C₆₀计算分别为30%, 28%. 氨基酸碳链的长度及加成产物在反应体系中能否及时沉淀析出影响和控制着加成度的大小. C₆₀[NH(CH₂)₅COOH]₅H₅ (3a), C₆₀(NHCH₂CH₂SO₃H)₄H₄ (6a)用柱层析进一步纯化, 其结构组成经元素分析, ¹H NMR, ¹³C NMR, IR所证实. 6a的水溶性受溶液pH的影响较小, 3a在不同pH缓冲溶液中的溶解性用光谱法测定, 分别为: pH＝10.25时为71.81 mg•mL^－1, pH＝7时为23.68 mg•mL^－1, pH＝3.36时为10.12 mg•mL^－1. 在波长273 nm处, 3a的摩尔消光系数为ε＝3.43×10⁴ L•mol^－1•cm^－1.     

C78(CH2)2结构和光谱的半经验和密度泛函研究

用INDO系列方法研究C₇₈(CH₂)₂的18种可能异构体，表明最稳定异构体是42,43,62,63-C₇₈(CH₂)₂,其中CH₂加在C₇₈（C_2V）椭球长轴所穿过的同一六员环的两个6/6键上，形成类环丙烷结构。并对最稳定的四种异构体用B3LYP/3-21G方法进行了结构优化,在此基础上, 用INDO/CIS方法计算的C₇₈(CH₂)₂稳定异构体的电子光谱的第一吸收峰和用AM1方法计算的碳笼上的C-C键的主要红外振动频率与C₇₈（C_2V）相比发生兰移，原因是C₇₈(CH₂)₂具有较大的LUMO-HOMO能隙和由于加成带来的共轭体系变小。在B3LYP/3-21G水平上计算的¹³C NMR谱表明,被加成的C-C键上的C原子化学位移向高场移动, 这是因为sp²杂化的C 原子被转化为 sp³杂化的C 原子.     

含能富勒烯吡咯烷衍生物的合成及工艺研究

利用Prato反应合成分离出了新型含硝基富勒烯吡咯烷衍生物1, 并对其工艺条件进行了研究, 探讨了反应物计量比、温度及时间对产物1产率的影响, 得到了合成产物1的最佳工艺条件: C₆₀, 间硝基苯甲醛和N-甲基甘氨酸的物质的量比为1∶1∶2, 温度为100 ℃, 反应时间为16 h, 此时产物1产率达到94.8%(以消耗的C₆₀计). 同时用UV-Vis, FT-IR, ¹H NMR, ¹³C NMR and MS spectra等光谱手段确定了产物1的分子结构.     

C60-吡咯烷衍生物的合成及非线性光学性质的研究

通过富勒烯C₆₀与肌氨酸和有机醛化合物的1,3-偶极环加成反应, 获得了九种含不同有机功能基团的C₆₀吡咯烷衍生物1～9, 用¹H NMR, ¹³C NMR, FTIR, UV-vis和FAB-MS进行了结构表征; 利用皮秒激光光源, 采用z扫描技术测定了分子的三阶非线性超极化率γ⁽³⁾, 结果显示: 化合物3 (γ⁽³⁾＝4.14×10^－33 esu)具有最大的三阶非线性光学系数, 说明增加噻吩共轭链的长度, 使三阶非线性活性增加; 对具有相同共轭链的C₆₀-噻吩吡咯烷衍生物(2, 5, 1和4), 吸电子取代基减小了三阶光学非线性活性, 给电子基增大了三阶光学非线性活性; 同时发现喹啉环2-位键联(7)比4-位(8)有更好的三阶光学非线性活性.     

(5R,6R)-6-苯基-5-(苯磺酰基乙酰基)二环[2.2.1]-2-庚烯的合成及结构表征

报道了一种制备4-苯基-1-苯磺酰基-3-丁烯-2-酮的新合成方法. 4-苯基-3-丁烯-2-酮与溴化试剂Ph₃P^＋CH₂CH₂- COOHBr 作用, 得到1-溴-4-苯基-3-丁烯-2-酮, 不经分离直接与苯亚磺酸钠发生亲核取代反应, 得到4-苯基-1-苯磺酰基-3-丁烯-2-酮. 将此反应产物作为亲双烯体与环戊二烯在手性钛金属催化剂催化下进行不对称Diels-Alder反应, 得到了＞99% ee 的环加成产物(5R,6R)-6-苯基-5-(苯磺酰基乙酰基)二环[2.2.1]-2-庚烯. 用X衍射法对产物的晶体结构进行了测定, 讨论了反应机理, 通过元素分析, NMR, MS对产物的结构进行了表征.     

[η5:σ-Me2C(C5H4)(C2B10H10)]Ru(NCCH3)2与中间炔的反应—— 钌环丁二烯和钌杂环戊三烯配合物的合成与结构

钌可以促使炔烃通过亚乙烯基钌卡宾金属配合物或钌金属杂环配合物的形式发生碳-碳偶联反应, 它的化学性质很大程度上取决于配体的电子和立体特征. 普通环戊二烯基钌配合物可以促使炔烃三聚生成苯环衍生物或使两分子炔烃和一分子含C=X键(X = C, O, S, N等)的不饱和底物发生环加成反应得到杂环化合物. 含桥联碳硼烷–环戊二烯基配体的钌乙腈配合物[η⁵:σ-Me₂C(C₅H₄)(C₂B₁₀H₁₀)]Ru(NCCH₃)₂ (1)表现出与环戊二烯基钌不同的反应性质. 例如, 配合物1与三甲基硅基取代的端炔或中间炔反应可生成含有单或双亚乙烯基有机钌卡宾配合物; 与末端芳炔则通过三分子炔和桥联配体中的环戊二烯基发生加成反应得到含有独特三环结构的有机钌配合物. 以上结果表明, 配体的位阻效应和炔烃的种类都可以影响产物的类型. 本文进一步研究了此钌乙腈配合物1与烷基或芳基取代的中间炔及中间二炔的反应. 配合物1与3-己炔或二苯乙炔在甲苯中于 80 ℃反应可以生成对空气和水稳定的η⁴-钌-环丁二烯配合物[η⁵: σ-Me₂C(C₅H₄)(C₂B₁₀H₁₀)]Ru(η⁴-C4Et4) (2) 或 [η⁵:σ-Me₂C(C₅H₄)(C₂B₁₀H₁₀)]Ru(η4-C₄Ph₄) (3), 此反应相信是通过一个钌杂环戊三烯中间体进行的. 由于这个中间体既不能在反应中被分离到也不能在核磁反应中被监测到, 我们接下来尝试了1和1,6-二炔的反应. 在 1与2,7-壬二炔或3,8-十一碳二炔的反应中成功分离到钌杂环戊三烯配合物[η⁵: σ-Me₂C(C₅H₄)(C₂B₁₀H₁₀)]Ru[=C₂- (Me)₂C₂(CH₂)₃] (4) 或 [η⁵: σ-Me₂C(C₅H₄)(C₂B₁₀H₁₀)]Ru[=C₂(Et)₂C₂(CH₂)₃] (5). 化合物4与5 在甲苯回流温度仍然稳定. 由于位阻效应, 它们也不与苯乙炔、3-己炔、苯基异氰酸酯、二硫化碳以及叔丁基异腈反应. 以上新化合物通过了核磁和元素分析表征, 其中化合物2和4的结构得到了单晶X射线衍射确定. 在化合物2的晶体结构中, 钌原子通过η⁵-键与环戊二烯基配位, σ-键与硼笼相连, 以及η⁴-键与环丁二烯配位, 形成一个平面三角形结构. 在化合物4的晶体结构中, 钌原子通过η⁵-键与环戊二烯基配位, σ-键与硼笼相连, 以及与两个碳卡宾原子配位, 形成一个扭曲四面体构型. 钌与碳卡宾原子之间的键长显示其为Ru=C双键. 在以上实验结果基础上我们提出了1与炔烃反应生成2和3的反应机理: 钌-乙腈配合物通过与炔烃的配体交换反应得到钌-二炔配合物, 进一步氧化偶联得到钌杂环戊三烯中间体, 还原消除反应得到最终产物?钌-环丁二烯配合物. 在1与二炔的反应中, 4和5中的并环结构可以阻止还原消除反应, 从而起到稳定钌杂环戊三烯中间体的作用. 上述实验结果表明, 桥联碳硼烷配体和底物(炔烃)的空间位阻效应都对反应有很大的影响.     

烃基硅铜酸盐与2-芳基-2-环烯酮1,4-加成反应的立体选择性及2-取代- 3-硅基环烷酮的合成

研究了烷基苯基硅铜酸盐与2-环烯酮的1,4-加成反应的立体选择性, 并合成了一系列新的2-取代-3-硅基环烷酮. 结果表明, 在0 ℃下用饱和NH₄Cl溶液处理, 烷基苯基硅铜酸盐与2-芳基-2-环烯酮的1,4-加成反应的立体选择性不同程度地受芳基和环的大小影响, 得到顺、反两种产物; 并首次发现室温下用甲醇处理反应时, 其立体选择性不受或者很少受环大小、芳基的性质以及与硅原子相连的取代基的影响, 只得到反式产物. 芳基溴甲烷与由烷基苯基硅铜酸盐与2-环烯酮1,4-加成所得的烯醇盐反应时, 只得到反式产物. 合成产物的结构用IR, ¹H NMR, ¹³C NMR, MS和HRMS等进行了表征.     

6-烷氧基乙氧/硫基-6-氧/硫-双苯并[1,3,2]-二氧磷杂八环的合成与波谱特征

通过双(3,5-二氯-2-羟基-苯基)甲烷(1)分别与POCl₃或PSCl₃在三乙胺存在下关环, 再与单烷氧基乙醇钠作用, 得到了新化合物5或6; 以1与P₄S₁₀及三乙胺关环的产物4与烷氧基溴乙烷反应得到了7. 测试了5, 6和7的¹H, ¹³C和³¹P NMR及MS数据, 并讨论了其特征. 观察到了磷与C¹H (C¹¹H)或C³H (C⁹H)与P的⁵J_PH偶合常数(约为0.9 Hz). 在1与POCl₃关环产物与单甲氧基乙醇反应的产物中, 分离到了一个副产物8并确定了它的化学结构. 1与POCl₃按3∶2的物质的量比在三乙胺存在下反应, 得到收率75%的8.     

De Mayo光环加成和桥(螺)环倍半萜基本碳架的构建

通过烃单萜3-甲基-6-异丙亚甲基环己烯(1)和2,6-二氧代戊酸甲酯(2)的de Mayo反应, 得到[2＋2]环加成产物、开环产物和游离基复合产物3～10. 经retro-aldol重排, 环加成产物3开环生成取代环己烯4, 在酸和碱性介质中对开环产物进行再环合, 经分子内Claisen缩合反应形成螺环和桥环化合物11～14. 讨论了可能的反应机理, 对所得新化合物的结构经IR, ¹H NMR, ¹³C NMR及元素分析予以确定.     

Alcohol adducts of zinc dichloride: Molecular structure of [ZnCl2(THF){1-HOC(C6H11)2-2-NMe2C6H4}]

The aminoalcohols 1-HOCR₂-2-NMe₂C₆H₄ [R = Ph (1), R = C₆H₁₁ (2)] and 1-HOCPh₂CH₂-2-NMe₂C₆H₄ (3) react with ZnCl₂ in tetrahydrofuran to give the alcohol adducts [ZnCl₂(THF){1-HOCR₂-2-NMe₂C₆H₄}] [R = Ph (4), R = C₆H₁₁ (5)] and [ZnCl₂(THF){1-HOCPh₂CH₂-2-NMe₂C₆H₄}] (6). The complexes 4–6 were characterized by ¹H and ¹³C NMR spectroscopy, and 5 was also structurally characterized by X-ray crystallography.     

Synthetic studies on bafilomycin A1: stereoselective synthesis of the enantiopure C1-C11 fragment

The synthesis of the enantiopure C₁-C₁₁ fragment of bafilomycin A₁ has been achieved with a 4% overall yield over 18 steps from (R)-(+)-citronellol. Key steps involve Sharpless asymmetric epoxidation, Miyashita reaction of a γ,δ-epoxymethacrylate with trimethylaluminum in the presence of water, bis-OTMS selective Swern oxidations, Corey-Fuchs alkyne formation, Negishi's carbometalation, and stereoselective formation of the C₂-C₃ trisubstituted bond of the conjugated diene by a Wittig-type olefination of the α,β-unsaturated C₃-C₁₁ aldehyde with the ylide derived from the readily available phosphonium salt [Cl⁻, Ph₃P⁺CH(OMe)COOMe].     

Synthesis of a Tyr-octreotate conjugated closo-carborane [HC2B10H10]: a potential compound for boron neutron capture therapy

A novel Tyr³-octreotate conjugated closo-carborane as a potential compound for boron neutron capture therapy was obtained via Fmoc solid phase peptide synthesis. The boron cluster [C₂B₁₀H₁₁] was introduced through the reaction of 6,9-bis(acetonitrile)decaborane and 5-hexynoic acid yielding a new closo-carborane conjugated carboxylic acid which was coupled subsequently with solid phase conjugated Tyr³-octreotate. The final boron-containing peptide was purified by preparative reverse phase HPLC and structural identity was proved applying MALDI-TOF mass spectrometry.     

Acid-catalysed hydrolysis of cis -[Cr(C2O4)(AaraNH2)(OH2)(OSO2)]? (where AaraNH2 denotes methyl 3-amino-2,3-dideoxy-α,d -arabino-hexopyranoside)

The synthesised complex cis-[Cr(C₂O₄)(AaraNH₂)(OH₂)(OSO₂)]⁻ anion with SO ₃ ²⁻ as a ligand in the inner coordination sphere, where AaraNH₂ denotes methyl 3-amino-2,3-dideoxy-α-d-arabino-hexopyranoside, was hydrolysed in the presence of acid at H⁺ concentrations from 0.01 to 2.7 m (HClO₄). The reaction kinetics was studied with the stopped-flow spectrophotometric (u.v.–vis.) technique at temperatures of 5, 10, 15, 18 and 20 °C. This hydrolysis turned out to be a single-step process. Determined for this reaction were the rate constant k ₁ for the removal of SO₂ from the coordination sphere of the cis-[Cr(C₂O₄)(AaraNH₂)(OH₂)(OSO₂)]⁻ ion and the constant pK ₁ of the protonation of this species in the reaction preceding the hydrolysis. The final product of this reaction – a new complex of Cr^III, cis-[Cr(C₂O₄)(AaraNH₂)(OH₂)₂]⁺, was obtained. A mechanism for the acid hydrolysis reaction is put forward based on the analysis of the rate constants obtained.     

One-pot three-component reaction of C60, amino acid and fluorinated benzaldehyde to C60-pyrrolidine derivatives

A series of fluorinated 2,5-disubstituted C₆₀-pyrrolidine derivatives were synthesized via one-pot three-component reaction of C₆₀, amino acid and fluorinated benzaldehyde under reflux in toluene or microwave irradiation. The cis- and trans-isomers could be isolated by chromatography and fully confirmed by ¹H NMR.     

Solid-state Na and C NMR characterization of Na3C60

Two separate samples of Na₃C₆₀ were prepared by direct reaction of C₆₀ with sodium metal vapor, and subjected to different annealing times of 10 days and 16 days. Solid-state ¹³C and ²³Na NMR, along with elemental analysis, powder X-ray diffraction (XRD) and Raman spectroscopy, were used to characterize both samples. The Raman spectra of both materials have a single peak at 1447 cm⁻¹ which correspond to the A_g peak of C₆₀³⁻, consistent with the stoichiometry of Na_xC₆₀ with x=3. The powder XRD patterns are also virtually identical for both samples. However, solid-state ²³Na and ¹³C NMR spectra of the two samples are significantly different, suggesting a relationship between annealing times and the final structure of the alkali fulleride. Variable-temperature ²³Na magic-angle spinning (MAS) NMR experiments reveal the existence of two or three distinct sodium species and reversible temperature-dependent diffusion of sodium ions between octahedral and tetrahedral interstitial sites. ¹³C MAS NMR experiments are used to identify resonances corresponding to free C₆₀ and fulleride species, implying that the samples are segregated-phase materials composed of C₆₀ and non-stoichiometric Na₃C₆₀. Variable-temperature ¹³C MAS NMR experiments reveal temperature-dependent motion of the fullerides.     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

N-(2-吡咯甲基)-1-苯基乙亚胺·二甲基铝的合成、结构及其催化丙交酯的活性

通过席夫碱配体N-（2-吡咯甲基）-1-苯基乙亚胺与三乙基铝按物质的量之比为1：1在无氧无水的条件下反应,合成了席夫碱铝的有机金属化合物N-（2-吡咯甲基）-1-苯基乙亚胺·二甲基铝。其结构分别用核磁氢谱、碳谱,元素分析和X射线单晶衍射技术进行了表征。铝化合物在催化外消旋丙交酯开环聚合反应中表现出了中等的活性并得到了以等规聚合为主的高聚物。     

N-(2-吡咯甲基)-1-苯基乙亚胺·二甲基铝的合成、结构及其催化丙交酯的活性

通过席夫碱配体N-（2-吡咯甲基）-1-苯基乙亚胺与三乙基铝按物质的量之比为1：1在无氧无水的条件下反应,合成了席夫碱铝的有机金属化合物N-（2-吡咯甲基）-1-苯基乙亚胺·二甲基铝。其结构分别用核磁氢谱、碳谱,元素分析和X射线单晶衍射技术进行了表征。铝化合物在催化外消旋丙交酯开环聚合反应中表现出了中等的活性并得到了以等规聚合为主的高聚物。