Variation in structure and Li<Superscript>+</Superscript>-ion migration in argyrodite-type Li<Subscript>6</Subscript>PS<Subscript>5</Subscript>X (X = Cl,Br, I) solid electrolytes

All-solid-state rechargeable lithium-ion batteries (AS-LIBs) are attractive power sources for electrochemical applications due to their potentiality in improving safety and stability over conventional batteries with liquid electrolytes. Finding a solid electrolyte with high ionic conductivity and compatibility with other battery components is a key factor in raising the performance of AS-LIBs. In this work, we prepare argyrodite-type Li₆PS₅X (X = Cl, Br, I) using mechanical milling followed by annealing. X-ray diffraction characterization reveals the formation and growth of crystalline Li₆PS₅X in all cases. Ionic conductivity of the order of 7?×?10^?4 S cm^?1 in Li₆PS₅Cl and Li₆PS₅Br renders these phases suitable for AS-LIBs. Joint structure refinements using high-resolution neutron and laboratory X-ray diffraction provide insight into the influence of disorder on the fast ionic conductivity. Besides the disorder in the lithium distribution, it is the disorder in the S^2?/Cl^? or S^2?/Br^? distribution that we find to promote ion mobility, whereas the large I^? cannot be exchanged for S^2? and the resulting more ordered Li₆PS₅I exhibits only a moderate conductivity. Li⁺ ion migration pathways in the crystalline compounds are modelled using the bond valence approach to interpret the differences between argyrodites containing different halide ions.     

Enabling ultrafast lithium-ion conductivity of Li2ZrCl6 by indium doping

Solid-state batteries with high energy density and safety are promising next-generation battery systems. However, lithium oxide and lithium sulfide electrolytes suffer low ionic conductivity and poor electrochemical stability, respectively. Lithium halide solid electrolyte shows high conductivity and good compatibility with the pristine high-voltage cathode but limited applications due to the high price of rare metal. Zr-based lithium halides with low cost and high stability possess great potential. Herein, a small amount of In³⁺ is introduced in Li₂ZrCl₆ to synthesize Li_2.25Zr_0.75In_0.25Cl₆ electrolytes with a high room temperature Li-ion conductivity of 1.08 mS/cm. Solid-state batteries using Li_2.25Zr_0.75In_0.25Cl₆/Li_5.5PS_4.5Cl_1.5 bilayer solid electrolytes combined with Li-In anode and pristine LiNi_0.7Mn_0.2Co_0.1O₂ cathode deliver high initial discharge capacities under different cut-off voltages. This work provides an effective strategy for enhancing the conductivity of Li₂ZrCl₆ electrolytes, promoting their applications in solid-state batteries.     

Electron Redistribution Enables Redox-Resistible Li6PS5Cl towards High-Performance All-Solid-State Lithium Batteries

Sulfide electrolytes with high ionic conductivity hold great promise for all-solid-state lithium batteries. However, the parasitic redox reactions between sulfide electrolyte and Li metal result in interfacial instability and rapid decline of the battery performance. Herein, a redox-resistible Li₆PS₅Cl (LPSC) electrolyte is created by regulating the electron distribution in LPSC with Mg and F incorporation. The introduction of Mg triggers the electron agglomeration around S atom, inhibiting the electron acceptance from Li, and F generates the self-limiting interface, which hinders the redox reactions between LPSC and Li metal. This redox-resistible Li₆PS₅Cl-MgF₂ electrolyte therefore presents a high critical current density (2.3 times that of pristine electrolyte). The LiCoO₂/Li₆PS₅Cl-MgF₂/Li cell shows an outstanding cycling stability (93.3 %@100 cycles at 0.2 C). This study highlights the electronic structure modulation to address redox issues on sulfide-based lithium batteries.     

Ionic conductivity and interfacial stability of Li6PS5Cl–Li6.5La3Zr1.5Ta0.5O12 composite electrolyte

Solid electrolytes which possess excellent lithium-ion conductivity and chemical compatibility with electrode materials are necessary for the commercialization of all-solid-state lithium batteries. However, a single solid electrolyte meeting above requirements is difficult. Consequently, the composite electrolytes have attracted more attention. In this paper, Li₆PS₅Cl–xLi_6.5La₃Zr_1.5Ta_0.5O₁₂ (LLZTO) (x = 0, 2.5 wt%, 5 wt%, 10 wt%) composite electrolytes are prepared by a simple planetary grinding process. It has been found that adding an appropriate amount of LLZTO can increase the lithium-ion conductivity. At 30 °C, the lithium-ion conductivity increases from 2.6 × 10⁻⁴ S/cm (Li₆PS₅Cl) to 5.4 × 10⁻⁴ S/cm (Li₆PS₅Cl-5 wt% LLZTO). Besides, the addition of LLZTO to the Li₆PS₅Cl can influence the growth rate of the SEI. It has been shown that the SEI growth rate obeys a parabolic rate law, and the growth rates of Li₆PS₅Cl, Li₆PS₅Cl-2.5 wt% LLZTO, Li₆PS₅Cl-5 wt% LLZTO, and Li₆PS₅Cl-10 wt% LLZTO are 8.62, 3.53, 3.33, and 3.38 Ω/h^1/2 at 60 °C, respectively. In lithium plating and stripping experiment, the voltage of symmetrical Li/Li₆PS₅Cl/Li cell suddenly drops to 0 V after cycling 39 h at 0.103 mA/cm² (0.097 mAh/cm²). On the contrary, the Li/Li₆PS₅Cl–xLLZTO (x = 2.5 wt%, 5 wt%, 10 wt%)/Li symmetrical cell exhibits a stable voltage profile over 100 h at the same test conditions. The corresponding interfacial impedance of Li/Li₆PS₅Cl–xLLZTO (x = 2.5 wt%, 5 wt%, 10 wt%) remains stable after 10, 30, and 50 charge/discharge cycles.

     

Impact of the Chlorination of Lithium Argyrodites on the Electrolyte/Cathode Interface in Solid-State Batteries

Lithium argyrodite-type electrolytes are regarded as promising electrolytes due to their high ionic conductivity and good processability. Chemical modifications to increase ionic conductivity have already been demonstrated, but the influence of these modifications on interfacial stability remains so far unknown. In this work, we study Li₆PS₅Cl and Li_5.5PS_4.5Cl_1.5 to investigate the influence of halogenation on the electrochemical decomposition of the solid electrolyte and the chemical degradation mechanism at the cathode interface in depth. Electrochemical measurements, gas analysis and time-of-flight secondary ion mass spectrometry indicate that the Li_5.5PS_4.5Cl_1.5 shows pronounced electrochemical decomposition at lower potentials. The chemical reaction at higher voltages leads to more gaseous degradation products, but a lower fraction of solid oxygenated phosphorous and sulfur species. This in turn leads to a decreased interfacial resistance and thus a higher cell performance.     

Boosting Solid‐State Diffusivity and Conductivity in Lithium Superionic Argyrodites by Halide Substitution

Developing high‐performance all‐solid‐state batteries is contingent on finding solid electrolyte materials with high ionic conductivity and ductility. Here we report new halide‐rich solid solution phases in the argyrodite Li₆PS₅Cl family, Li_6?xPS_5?xCl_1+x, and combine electrochemical impedance spectroscopy, neutron diffraction, and ⁷Li NMR MAS and PFG spectroscopy to show that increasing the Cl^?/S^2? ratio has a systematic, and remarkable impact on Li‐ion diffusivity in the lattice. The phase at the limit of the solid solution regime, Li_5.5PS_4.5Cl_1.5, exhibits a cold‐pressed conductivity of 9.4±0.1 mS cm^?1 at 298 K (and 12.0±0.2 mS cm^?1 on sintering)—almost four‐fold greater than Li₆PS₅Cl under identical processing conditions and comparable to metastable superionic Li₇P₃S₁₁. Weakened interactions between the mobile Li‐ions and surrounding framework anions incurred by substitution of divalent S^2? for monovalent Cl^? play a major role in enhancing Li⁺‐ion diffusivity, along with increased site disorder and a higher lithium vacancy population.     

Dependence of solar cell performance on the nature of alkaline counterion in gel polymer electrolytes containing binary iodides

Performance of dye-sensitized nano-crystalline TiO₂ thin film-based photo-electrochemical solar cells (PECSCs) containing gel polymer electrolytes is largely governed by the nature of the cation in the electrolyte. Dependence of the photovoltaic performance in these quasi-solid state PECSCs on the alkaline cation size has already been investigated for single cation iodide salt-based electrolytes. The present study reports the ionic conductivity dependence on the nature of alkaline cations (counterion) in a gel polymer electrolyte based on binary iodides. Polyacrylonitrile-based gel polymer electrolyte series containing binary iodide salts is prepared using one of the alkaline iodides (LiI, NaI, KI, RbI, and CsI) and tetrapropylammonium iodide (Pr₄NI). All the electrolytes based on binary salts have shown conductivity enhancement compared to their single cation counterparts. When combined with Pr₄NI, each of the Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺ cation containing iodide salts incorporated in the gel electrolytes has shown a room temperature conductivity enhancement of 85.59, 12.03, 12.71, 20.77, and 15.36%, respectively. The conductivities of gel electrolytes containing binary iodide systems with Pr₄NI and KI/RbI/CsI are higher and have shown values of 3.28, 3.43, and 3.23 mS cm⁻¹, respectively at room temperature. The influence of the nature of counterions on the performance of quasi-solid state dye-sensitized solar cells is investigated by assembling two series of cells. All the binary cationic solar cells have shown more or less enhancements of open circuit voltage, short circuit current density, fill factor, and efficiency compared to their single cation counterparts. This work highlights the importance of employing binary cations (a large and a small) in electrolytes intended for quasi-solid state solar cells. The percentage of energy conversion efficiency enhancement shown for the PECSCs made with electrolytes containing Pr₄NI along with Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺ iodides is 260.27, 133.65, 65.27, 25.32, and 8.36%, respectively. The highest efficiency of 4.93% is shown by the solar cell containing KI and Pr₄NI. However, the highest enhancements of ionic conductivity as well as the energy conversion efficiency were exhibited by the PECSC made with Li⁺-containing binary cationic electrolyte.

     

Ordered and Fast Ion Transport of Quasi-solid-state Electrolyte with Regulated Coordination Strength for Lithium Metal Batteries

Polymer based quasi-solid-state electrolyte (QSE) has attracted great attention due to its assurance for high safety of rechargeable batteries including lithium metal batteries (LMB). However, it faces the issue of low ionic conductivity of electrolyte and solid-electrolyte-interface (SEI) layer between QSE and lithium anode. Herein, we firstly demonstrate that the ordered and fast transport of lithium ion (Li⁺) can be realized in QSE. Due to the higher coordination strength of Li⁺ on tertiary amine (−NR₃) group of polymer network than that on carbonyl (−C=O) group of ester solvent, Li⁺ can diffuse orderly and quickly on −NR₃ of polymer, significantly increasing the ionic conductivity of QSE to 3.69 mS cm⁻¹. Moreover, −NR₃ of polymer can induce in situ and uniform generation of Li₃N and LiN_xO_y in SEI. As a result, the Li||NCM811 batteries (50 μm Li foil) with this QSE show an excellent stability of 220 cycles at ≈1.5 mA cm⁻², 5 times to those with conventional QSE. LMBs with LiFePO₄ can stably run for ≈8300 h. This work demonstrates an attractive concept for improving ionic conductivity of QSE, and also provides an important step for developing advanced LMB with high cycle stability and safety.     

Syntheses and Characterization of Novel Perovskite-Type LaScO3-Based Lithium Ionic Conductors

Perovskite-type lithium ionic conductors were explored in the (Li_xLa_1−x/3)ScO₃ system following their syntheses via a high-pressure solid-state reaction. Phase identification indicated that a solid solution with a perovskite-type structure was formed in the range 0 ≤ x < 0.6. When x = 0.45, (Li_0.45La_0.85)ScO₃ exhibited the highest ionic conductivity and a low activation energy. Increasing the loading of lithium as an ionic diffusion carrier expanded the unit cell volume and contributed to the higher ionic conductivity and lower activation energy. Cations with higher oxidation numbers were introduced into the A/B sites to improve the ionic conductivity. Ce⁴⁺ and Zr⁴⁺ or Nb⁵⁺ dopants partially substituted the A-site (La/Li) and B-site Sc, respectively. Although B-site doping produced a lower ionic conductivity, A-site Ce⁴⁺ doping improved the conductive properties. A perovskite-type single phase was obtained for (Li_0.45La_0.78Ce_0.05)ScO₃ upon Ce⁴⁺ doping, providing a higher ionic conductivity than (Li_0.45La_0.85)ScO₃. Compositional analysis and crystal-structure refinement of (Li_0.45La_0.85)ScO₃ and (Li_0.45La_0.78Ce_0.05)ScO₃ revealed increased lithium contents and expansion of the unit cell upon Ce⁴⁺ co-doping. The highest ionic conductivity of 1.1 × 10⁻³ S cm⁻¹ at 623 K was confirmed for (Li_0.4Ce_0.15La_0.67)ScO₃, which is more than one order of magnitude higher than that of the (Li_xLa_1−x/3)ScO₃ system.     

Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

Graphene fluoride as a conductive agent for Li-argyrodite electrolyte containing all-solid-state batteries

A sulfide-based Li-argyrodite, Li₆PS₅X (X = Cl, Br, I), is a promising solid-state electrolyte candidate for next-generation all-solid-state batteries. The compound features high ionic conductivity, which is attributed to the high polarizability of sulfur and anion site disorder, providing advantageous crystallographic geometries for Li-ions to occupy and diffuse. However, the chemical instability of Li₆PS₅Cl during cycling limits its implementation in practical applications. This study employs graphene fluoride as a conductive agent for the cathode composite to alleviate the undesirable decomposition reactions at the electrolyte interface. The combined measurements of time-dependent X-ray photoelectron spectroscopy and electrochemical analysis confirmed that graphene fluoride significantly enhances the chemical stability of the electrolyte interface, yielding a stable cycling performance.     

Li7P3S11电解质的合成、传导及应用

固态电解质是固态电池中的关键材料,开发具有高离子电导率、高化学/电化学稳定性、电极兼容性良好的固态电解质正成为研究热点。硫化物固态电解质相较其它固态电解质具有更高的离子电导率和良好的机械加工性能等优势,是最有前景实现实用化的固态电解质之一。在众多硫化物固态电解质中,Li₇P₃S₁₁因其高的离子电导率和较低的原料成本而极具研究意义。本文首先介绍了Li₇P₃S₁₁电解质的结构、Li⁺传导机理及合成路径;其次,针对该电解质的电导率提高、空气/水稳定性提升、固固界面稳定性及电解质自身稳定性改善等问题,综述了目前常用的改性策略研究;再次,总结了基于Li₇P₃S₁₁电解质的全固态锂离子电池和全固态锂硫电池的构筑;最后,本文分析了Li₇P₃S₁₁电解质的研究和应用面临的挑战,并指出该电解质未来发展的趋势。     

Stabilizing Solid-state Lithium Metal Batteries through In Situ Generated Janus-heterarchical LiF-rich SEI in Ionic Liquid Confined 3D MOF/Polymer Membranes

Pursuing high power density lithium metal battery with high safety is essential for developing next-generation energy-storage devices, but uncontrollable electrolyte degradation and the consequence formed unstable solid-electrolyte interface (SEI) make the task really challenging. Herein, an ionic liquid (IL) confined MOF/Polymer 3D-porous membrane was constructed for boosting in situ electrochemical transformations of Janus-heterarchical LiF/Li₃N-rich SEI films on the nanofibers. Such a 3D-Janus SEI-incorporated into the separator offers fast Li⁺ transport routes, showing superior room-temperature ionic conductivity of 8.17×10⁻⁴ S cm⁻¹ and Li⁺ transfer number of 0.82. The cryo-TEM was employed to visually monitor the in situ formed LiF and Li₃N nanocrystals in SEI and the deposition of Li dendrites, which is greatly benefit to the theoretical simulation and kinetic analysis of the structural evolution during the battery charge and discharge process. In particular, this membrane with high thermal stability and mechanical strength used in solid-state Li||LiFePO₄ and Li||NCM-811 full cells and even in pouch cells showed enhanced rate-performance and ultra-long life spans.     

Ultraviolet-Cured Semi-Interpenetrating Network Polymer Electrolytes for High-Performance Quasi-Solid-State Lithium Metal Batteries

Solid polymer electrolytes with relatively low ionic conductivity at room temperature and poor mechanical strength greatly restrict their practical applications. Herein, we design semi-interpenetrating network polymer (SNP) electrolyte composed of an ultraviolet-crosslinked polymer network (ethoxylated trimethylolpropane triacrylate), linear polymer chains (polyvinylidene fluoride-co-hexafluoropropylene) and lithium salt solution to satisfy the demand of high ionic conductivity, good mechanical flexibility, and electrochemical stability for lithium metal batteries. The semi-interpenetrating network has a pivotal effect in improving chain relaxation, facilitating the local segmental motion of polymer chains and reducing the polymer crystallinity. Thanks to these advantages, the SNP electrolyte shows a high ionic conductivity (1.12 mS cm⁻¹ at 30 °C), wide electrochemical stability window (4.6 V vs. Li⁺/Li), good bendability and shape versatility. The promoted ion transport combined with suppressed impedance growth during cycling contribute to good cell performance. The assembled quasi-solid-state lithium metal batteries (LiFePO₄/SNP/Li) exhibit good cycling stability and rate capability at room temperature.     

Ionic Conductivity of the NASICON-Related Thiophosphate Na1+xTi2−xGax(PS4)3

Inspired by the recent interest in fast ionic conducting solids for electrolytes, the ionic conductivity of a novel ionic conductor Na_1+xTi_2−xGa_x(PS₄)₃ has been investigated. Using X-ray diffraction and impedance spectroscopy the sodium ionic conductivity in this compound was demonstrated, in which bond valence sum analysis suggests a tunnel diffusion for Na⁺. Substitution with Ga³⁺ leads to an increasing Na⁺ content, an expansion of the lattice and an increasing conductivity with increasing x in Na_1+xTi_2−xGa_x(PS₄)₃. Given the relation to the NASICON family, upon replacement of the phosphate by a thiophosphate group, a rich structural chemistry can be expected in this class of materials. This work demonstrates the potential for making NaTi₂(PS₄)₃ an ideal system to study structure-property relationships in ionic conductors.     

Enabling the Operation of Highly Compatible LiI-3-Hydroxypropionitrile Small-Molecule Solid-State Electrolytes in Lithium Metal Batteries via Stepped-Amorphization Strategy

Integrating the advantages of both inorganic ceramic and organic polymer solid-state electrolytes, small-molecule solid-state electrolytes represented by LiI-3-hydroxypropionitrile (LiI-HPN) inorganic–organic hybrid systems possess good interfacial compatibility and high modulus. However, their lack of intrinsic Li⁺ conduction ability hinders potential application in lithium metal batteries until now, despite containing LiI phase composition. Herein, inspired by evolution tendency of ionic conduction behaviors together with first-principles molecular dynamics simulations, we propose a stepped-amorphization strategy to break the Li⁺ conduction bottleneck of LiI-HPN. It involves three progressive steps of composition (LiI-content increasing), time (long-time standing), and temperature (high-temperature melting) regulations, to essentially construct a small-molecule-based composite solid-state electrolyte with intensified amorphous degree, which realizes efficient conversion from an I⁻ to Li⁺ conductor and improved conductivity. As a proof, the stepped-optimized LiI-HPN is successfully operated in lithium metal batteries cooperated with Li₄Ti₅O₁₂ cathode to deliver considerable compatibility and stability over 250 cycles. This work not only clarifies the ionic conduction mechanisms of LiI-HPN inorganic–organic hybrid systems, but also provides a reasonable strategy to broaden the application scenarios of highly compatible small-molecule solid-state electrolytes.     

Li2S-P2S5体系电解质及其在全固态锂离子电池中的应用研究进展

全固态锂离子电池具有安全性能好、能量密度高、工作温区广等优点,被广泛应用于便携式电子设备。固态电解质是全固态锂离子电池的关键材料之一,其中的硫化物电解质具有离子电导率高、电化学窗口宽、晶界电阻低和易成膜等特点,被认为最有希望应用于全固态锂离子电池。本文综述了Li_2S-P_2S_5体系电解质的发展状况,包括固态电解质的制备、改性、表征以及电极/固态电解质之间的固-固界面的稳定兼容问题。本文还涉及了以Li_2S-P_2S_5为电解质的全固态锂离子电池性能的研究进展。     

Chemistry Design Towards a Stable Sulfide‐Based Superionic Conductor Li4Cu8Ge3S12

Sulfide‐based superionic conductors with high ionic conductivity have been explored as candidates for solid‐state Li batteries. However, moisture hypersensitivity has made their manufacture complicated and costly and also impeded applications in batteries. Now, a sulfide‐based superionic conductor Li₄Cu₈Ge₃S₁₂ with superior stability was developed based on the hard/soft acid–base theory. The compound is stable in both moist air and aqueous LiOH aqueous solution. The electrochemical stability window was up to 1.5 V. An ionic conductivity of 0.9×10^?4 S cm with low activation energy of 0.33 eV was achieved without any optimization. The material features a rigid Cu‐Ge‐S open framework that increases its stability. Meanwhile, the weak bonding between Li⁺ and the framework promotes ionic conductivity. This work provides a structural configuration in which weak Li bonding in the rigid framework promotes an environment for highly conductive and stable solid‐state electrolytes.     

Y[PS4]: An Unusual ABX4 Compound with a PtS-Related Crystal Structure

Pale yellow single crystals of Y[PS₄] (tetragonal, I4₁/acd; a = 1065.72(5), c = 1899.23(9) pm, Z = 16) can easily be obtained by the reaction of the elements without using a flux to avoid the entrapment of alkali metals. The structure consists of isolated [PS₄]^3- tetrahedra (d(P-S) = 203 pm, 4×) each surrounded by four Y³⁺ cations resulting in a S₄N₄-analogous arrangement of the metal cations and sulfur atoms about the phosphorus in the center of this polyhedron. Both crystallographically different Y³⁺ cations are eightfold coordinated by sulfur in the shape of trigonal dodecahedra (d(Y-S) = 280 - 300 pm, CN = 8) which in turn belong to four exclusively edge-attached [PS₄]^3- tetrahedra. These build up a distorted cubic closest packing where the Y³⁺ cations are situated in one half of the tetrahedral holes the same way as S^2- in the Pt²⁺ arrangement of the PtS-type structure.