铁催化酮类化合物脱氧双硼化制备非末端偕二硼（英文）

报道了一种铁催化的酮类化合物的脱氧硼化反应,通过该方法制备一系列的非末端偕二硼化合物,并进一步将该方法应用到克级规模制备中.同时,以常用有机溶剂丙酮为原料制备了相应的非末端偕二硼化合物,并对该偕二硼化合物的C—B键进行选择性单官能团或双官能团化,以验证该类化合物在有机合成中的应用价值.     

镁粉促进Weinreb酰胺和卤代烃的“一锅法”制备酮类反应研究

探索了空气中镁粉促进Weinreb酰胺和卤代烃"一锅法"制备酮类化合物的反应.研究发现一元Weinreb酰胺和卤代烃可在空气中镁粉直接促进下反应,简单高效地得到了相应的酮类化合物.二元Weinreb酰胺和卤代烃在不同的原料配比下反应,得到羰基Weinreb酰胺或二酮类化合物.本方法具有操作简便、合成效率高等优点,为酮类化合物的制备提供了一种简单、高效的合成方法.     

水溶液中钯催化的Heck/氰基化串联反应合成3-氰甲基吲哚酮

3-氰甲基吲哚酮是一类重要的药物合成中间体,利用其氰基官能团的转化可以合成Horsfiline、Esermethole和Physostigmine等天然产物.发展了一种水溶液中的Heck/氰基化串联反应,可以绿色、简便地合成3-氰甲基吲哚酮类化合物,该方法与文献方法相比,不仅能够以绿色介质水代替有机溶剂,而且不需要添加碱作为缚酸剂,为3-氰甲基吲哚酮类化合物提供了一种绿色高效的合成新途径.     

可见光下曙红Y催化的吲哚酮类化合物的合成

报道了在可见光下N-芳基丙烯酰胺与溴丙二酸二乙酯的串联环化反应来合成一系列包含丙二酰基的吲哚酮类化合物.反应用便宜、易处理、对环境无污染的曙红Y作光催化剂在室温下反应获得较好收率的产物.为吲哚酮类化合物的合成提供了一种简便经济的方法.     

硝酸铈铵氧化芳基取代的β-酮酸酯的偶联反应

报道一种制备芳基取代的1,4-二酮类化合物的温和简便方法, 以乙腈水溶液为溶剂, 硝酸铈铵为氧化剂, 对芳基取代的β-酮酸酯进行氧化偶联, 最高可以94%的产率得到双分子二聚产物, 为硝酸铈铵对1,3-二酮类化合物的氧化反应机理提供了有力证据.     

第五、六族元素的有机化合物在有机合成中应用的研究 ⅩⅩⅩⅠ.应用稳定胂叶立德合成β-酮酸酯和β-二酮的一种简便方法

本文报道一种在温和条件下使稳定胂叶立德(1)砷—碳键断裂的方法,从而合成了β-酮酸酯和β-二酮类化合物,特别是相应的含氟化合物.该方法操作简便,产物容易分离提纯,得率较好.     

由氰基乙酰芳胺衍生物出发合成喹啉-2,4-二酮类化合物

喹啉-2,4-二酮结构单元广泛存在于天然产物以及具有生物活性的合成化合物中.报道一种通过α,α-二烃基氰基乙酰芳胺化合物在三氟甲烷磺酸甲酯作用下的分子内Houben-Hoesch反应合成喹啉-2,4-二酮类化合物的方法.该方法具有适用范围广、操作简便、反应条件温和等优点.     

环丁酮类腙参与的偕二氟环丙烷开环胺化反应

以环丁酮类腙和偕二氟环丙烷为原料,通过钯催化的偕二氟环丙烷开环和氮中心的亲核捕获过程,以中等至优秀的收率合成了一系列N-氟代烯丙基腙四元环化合物.该方法具有较强的官能团兼容性和良好的底物普适性,同时适用于克级规模反应制备.     

微波促进下9-芳基氢化吖啶-1,8-二酮的合成研究

本文研究了微波促进下芳香醛、5,5-二甲基-1,3-环己二酮与碳酸氢铵的三组分无溶剂缩合反应,并通过该反应合成了一系列9-芳基氢化吖啶-1,8-二酮类化合物.这一合成方法具有操作简便、反应条件温和、产率高、对环境友好等特点.     

铁催化酮羰基的硼化反应合成α-羟基硼酸酯

报道了一种铁催化烷基酮类化合物硼化合成三级α-羟基硼酸酯的反应,使用了可商业购买的FeBr₂作为催化剂,加入醇作为添加剂来加速反应的进行,同时避免副反应的发生.通过该方法合成了一系列三级α-羟基硼酸酯化合物,反应具有很好的底物兼容性以及官能团兼容性.该铁催化剂对于大位阻的酮类化合物的硼化反应,表现出优于铜催化的活性.同时该反应可应用于克级规模的制备,随后通过对三级α-羟基硼酸酯的C-O键进行官能化,将所得的三级α-羟基硼酸酯转化为三级烷基硼酸酯以及偕二硼、偕硅硼类化合物.     

First synthesis of the A/B ring of ouabain

[reaction: see text] The synthesis of the fully fuctionalized A/B ring of ouabain has been accomplished efficiently from commercially available starting materials. A key Robinson annulation allows for the building of the desired carbon framework in one high-yielding step. Directed epoxidation followed by selective epoxide opening furnished the final tetraol with the desired all-cis stereochemistry.     

Construction of the Tricyclo

Histrionicotoxin derivatives have long been attractive targets for synthetic chemists as a result of their useful neurophysical properties, low natural abundance, and the unique structural features of the azaspiro[5.5]undecane ring system. Utilizing our tandem pinacol rearrangement-ene strategy and regiospecific Baeyer-Villiger oxidation as key steps, we have successfully synthesized an advanced synthetic intermediate, spiro[5.4]decane 4, which has previously been converted to (+/-)-perhydrohistrionicotoxin (5b). Pinacol rearrangement of simple Diels-Alder derived bicyclo[2.2.2]octene system 2a, followed by an ene reaction, led to the efficient formation of the highly fuctionalized tricyclo[5.3.1.0(1,5)]undecane system 1a. This tricyclic system 1a was selectively transformed into spiro[5. 4]decane system 4 via a regiospecific Baeyer-Villiger oxidation reaction. We also report the results of systematic studies of Baeyer-Villiger oxidation reactions of tricyclo[5.3.1.0(1, 5)]undecanone systems to elucidate the origin of the regioselectivity of this process.     

苯乙烯/马来酸酐共聚物修饰碳纳米管的研究

利用羟基碳纳米管上的羟基与马来酸酐之间的简单反应, 在碳纳米管上引入双键, 进一步引发苯乙烯聚合, 在碳纳米管表面接枝苯乙烯马来酸酐共聚物, 同时采用羟基碳纳米管与苯乙烯马来酸酐共聚物直接反应也在碳纳米管的表面引入了苯乙烯马来酸酐共聚物. 经IR, Raman, TG和TEM测定, 证明了碳纳米管与苯乙烯马来酸酐共聚物之间为化学键连接关系.     

Amperometric determination of 6-mercaptopurine on functionalized multi-wall carbon nanotubes modified electrode by liquid chromatography coupled with microdialysis and its application to pharmacokinetics in rabbit

In this paper, multi-wall carbon nanotubes fuctionalized with carboxylic groups modified electrode (MWNT-COOH CME) was fabricated. This chemically modified electrode (CME) can be used as the working electrode in the liquid chromatography for the determination of 6-mercaptopurine (6-MP). The results indicate that the CME exhibits efficiently electrocatalytic oxidation for 6-MP with relatively high sensitivity, stability and long-life. The peak currents of 6-MP are linear to its concentrations ranging from 4.0×10⁻⁷ to 1.0×10⁻⁴ mol l⁻¹ with the calculated detection limit (S/N=3) of 2.0×10⁻⁷ mol l⁻¹. Coupled with microdialysis, the method has been successfully applied to the pharmacokinetic study of 6-MP in rabbit blood. This method provides a fast, sensible and simple technique for the pharmacokinetic study of 6-MP in vivo.     

Enantioseparation of doubly functionalized polar norbornenes by HPLC and their ruthenium‐catalyzed ring‐opening metathesis polymerization

Doubly fuctionalized polar norbornenes bearing the cyano and ester groups in 2,3‐positions are synthesized and enantiomers are separated by high performance liquid chromatography (HPLC) with a chiral stationary phase. These optically active monomers are polymerized by ruthenium carbene catalysts, and high yields of the polymers were obtained. The chiral monomer bearing ethyl ester gave an optically active polymer of lower, but opposite sign of optical rotation (monomer [α]_D = +61.0°, polymer [α]_D = ?3.1°). The circular dichroism (CD) of the obtained chiral polymers gave a Cotton effect. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 485–491, 2010     

糖脂功能化聚二乙炔Langmuir-Schaefer薄膜与大肠杆菌的分子识别及动力学过程研究

在气液界面上研究了α-D-甘露糖苷-十六烷(MC₁₆)与10,12-二十五碳双炔酸混合单分子膜行为,二者具有较好的互溶性.在疏水的玻璃衬底上用Langmuir-Schaefer(LS)薄膜技术制备单层MC₁₆/PDA薄膜,研究了这种仿生薄膜与大肠杆菌jm109的相互作用.大肠杆菌jm109对MC₁₆修饰的聚二乙炔LS薄膜的吸附,使薄膜颜色由蓝色变为红色,用紫外-可见吸收光谱可进行定量检测.动力学研究显示比色响应值随时间的增加而增加,3min内即有显著变化,15min后趋于饱和,20min后CR值达到28%,进一步探讨了分子识别的动力学过程.     

In Vivo Monitoring of the Thiols in Rat Striatum by Liquid Chromatography with Amperometric Detection at a Functionalized Multi‐Wall Carbon Nanotubes Modified Electrode

A new chemically modified electrode (CME) was fabricated, which was based on the immobilization of multi‐wall carbon nanotubes fuctionalized with carboxylic group (MWNT‐COOH). The results indicated that the CME exhibited efficiently electrocatalytic oxidation for L ‐cysteine and glutathione with relatively high sensitivity, stability and long‐life. Coupled with HPLC, the MWNT‐COOH CME was utilized for amperometric detection of the thiols. The peak currents of L ‐cysteine and glutathione were linear to their concentrations ranging from 3.0×10^?7 to 1.0×10^?3 mol/L with the calculated detection limit (S/N=3) of 1.2×10^?7, 2.2×10^?7 mol/L, respectively. The method had been successfully applied to assess the contents of L ‐cysteine and glutathione in rat striatal microdialysates.     

Modification of micro-channel filling flow by poly(dimethylsiloxane) surface functionalization with fluorine—Substituted aminonaphthols

Microfluidics based on the capillarity-induced filling of elastomeric channels by a suitable liquid or solution represents a useful route for realizing portable diagnostic devices designed without additional mechanical or electrical micropumps. In this study, an elastomeric mold made of poly(dimethylsiloxane) (PDMS), containing relief patterns placed in intimate contact with a silicon substrate, is utilized to create a continuous network of rectangular micro-channels for the motion of water fluid. The immobilization on activated PDMS surface of suitable functional molecules such as hydrophilic and hydrophobic fluorine-containing aminonaphthols, obtained through a straightforward and versatile synthetic procedure, allowed us to modulate PDMS surface properties depending on the structural characteristics of the employed derivative. In this context, the incorporation of fluorine groups is important for improving biocompatibility of the resulting device, providing surfaces that could be chemically and biologically inert as well as resistant to surface adhesion phenomena. The functionalization from liquid phase of PDMS replicas, involving a covalent derivatization via silanization reaction of the above mentioned compounds to an oxidized PDMS surface, resulted in a successful modification of microfluidic motion of water in rectangular capillaries, moreover contact angle values evidence also how wettability of PDMS films could be modulated, with the fluorinated aminonaphthols fuctionalized PDMS exhibiting higher contact angles.     

水相介质中碳酸钾/硫脲联合促进邻位氨基溴转变成α,β-脱氢氨的研究

建立了在水相介质中, 在碳酸钾/硫脲联合促进下, 具有邻位氨基溴的酯和邻位氨基溴的酮在室温下发生溴化氢消除反应, 高收率地制备α,β-脱氢氨(功能化烯胺)的新方法. 共考察了23种不同结构α,β-邻位氨基溴的酯和α,β-邻位氨基溴的酮的反应情况, 证明该方法具有广泛的适应性. 实验发现, 无论底物为α-氨基-β-溴结构还是α-溴-β-氨基结构, 反应过程中都要经过一个氮丙啶过程, 而氮丙啶的开环是区域专一的, 因此产物具有区域专一性(烯键上的氨基均处在羰基的α-位). 所有产物的结构均经过核磁共振波谱及高分辩率质谱确证. 克量级放大实验结果表明, 该方法具有一定的用于工业化生产的可行性.     

Post‐polymerization modification of a new reactive monolith for reversed phase and hydrophilic interaction capillary electrochromatography of neutral,polar, and biologically active compounds

A reactive monolith based on the polymerization of 3‐chloro‐2‐hydroxypropyl methacrylate, (HPMA‐Cl), with a crosslinking agent, ethylene glycol dimethacrylate (EDMA), was synthesized and post‐functionalized with a macromolecular ligand polyethyleneimine. Monolithic columns with controlled permeability and pore structure were prepared by free radical polymerization in the presence of a binary porogenic mixture of isopropanol and decanol. The presence of chloropropyl functionality in the pristine monolith allowed the synthesis of a post‐fuctionalized monolith carrying cationic groups that was used to control the magnitude of electroosmotic flow (EOF) in electrochromatographic separation. In the synthesis of pristine monoliths, the feed concentration of functional monomer (ie, HPMA‐Cl) was changed between 30 and 60 v/v % for obtaining cationic monoliths providing satisfactory electrochromatographic separation. The best electrochromatographic performance was obtained with the polyethyleneimine functionalized monolith prepared by using the pristine monolith obtained by 60% (v/v) monomer concentration. This monolith was used in reversed phase and hydrophilic interaction capillary electrochromatography modes for the separation of alkylbenzenes, polycyclic aromatic hydrocarbons, phenols, and nucleosides, using mobile phases with low acetonitrile (ACN) contents ranging between 20% and 35% (v/v). This ACN range was remarkably lower than the content of ACN used on the hydrophilic polymethacrylate‐based monoliths reported previously (ie, >90%). The plate heights up to 5.3 μm were obtained for the separation of nucleosides with the environmental friendly mobile phases whose ACN contents were also remarkably lower than that of similar polymethacrylate‐based monoliths.