导电高分子薄膜修饰电极的研究 Ⅰ.聚吡咯薄膜电极的电化学合成及行为

聚吡咯(PPy)是发展较早的一种杂环导电高分子,有关其制备、电化学形为和表征已有文献报道.PPy 不仅具有良好的导电性和较高的稳定性,而且易于制备.利用在电化学聚合过程中可能掺入目的功能团的特点,PPy 作为一种修饰电极对电催化和电分析方面的研究已引起了注意.目前,PPy 的制备主要集中于有机体系,而在水溶液中的研究还较少.本文用电     

中性红／蒙脱石／SnO2化学修饰电极制备及电化学性能

蒙脱石有很好的层状结构、大的表面积和优良的吸附性,与其它修饰材料(如Nafion)相比有较高的热稳定性和化学稳定性。是可以利用的廉价材料。用它制成的化学修饰电极(CME)已用于电催化、电有机合成等。 本文报道中性红(NR)/蒙脱石/SnO_2 CME的制备及其电化学性能。实验结果表明,用蒙脱石作修饰层材料,对电活性物质有很好的富集作用,制得的CME有较好的稳定性。虽然电活性物在蒙脱石膜界面的扩散系数较小,但由于在膜内有较高的浓度,因而制得的CME比空白     

溶剂对聚酰亚胺电化学行为的影响

运用电化学循环伏安等方法研究了有机溶剂对可溶性聚酰亚胺(PI)电化学行为的影响.结果表明,PI在一些溶剂中能进行电化学反应.红外光谱研究表明溶剂对PI电化学行为的影响主要取决于不同结构的溶剂与PI之间的相互作用.     

苯二酚在聚吡咯膜修饰电极上的催化反应

儿茶酚等有机化合物是人体内的电活性物质，直接参予人体内的各种生理过程．有关这类物质的电化学行为一直是生物化学和化学领域的重要研究课题之一．但这些物质在固体电极上的电极反应迟缓，过电位高，检测比较困难．利用化学修饰电极可以对这类物质的电极反应进行催化，可制成各种电流式传感器[1]，特别是聚合物膜修饰电极传感器有催化效率高、稳定性好等优点问，是目前电化学传感器研究中的一个主要方面．聚毗咯膜（PPy）修饰电极自从出现以来已得到了广泛的应用，在电分析化学领域更具有稳定性好，制备条件简便等优点．一些在固体电极…     

聚2，5-二甲氧基苯胺的合成与表征

报导了聚2，5-二甲氧基苯胺（P25DMAn）的化学与电化学合成，并用元素分析、FTIR、UV－VIS吸收光谱、电导率测定以及电化学等手段对该聚合物进行了表征．P25DMAn类似聚苯胺（PAn）的结构，是由其单体通过氮原子N在对位上键合而成.P25DMAn是一种能溶于多种有机溶剂如THF、CH2Cl2、CHCl3、DMSO、DMF等．并具有极好的环境稳定性，优良的电活性和相当高的电导率的高聚物．因此，P25DMAn是一种很有应用前景的新的导电高聚物．     

异咯嗪蒙脱石修饰电极的电化学行为

应用十六烷基三甲基溴化铵对蒙脱石进行改性，成功地制备稳定性良好的异咯嗪蒙脱石修饰电采，用循环伏安法对此修饰电极的电化学行为进行了研究。测定了异咯嗪在蒙脱石膜内的化学扩散系数，对异咯嗪在改性蒙脱石中电极反应机制进行了探讨。     

4-[2-(4-N,N-二甲基苯胺基)乙烯基]吡啶氧化物的电化学行为

半菁染料是人们制造ＬＢ膜的材料之一．近年来,为得到电导率较高的薄膜,电荷转移络合物的ＬＢ膜受到重视［１］．实验证明,有机材料的ＬＢ膜经化学修饰或改性以后,电导率大大增加．化学工作者常将有机染料分子用来修饰电极,在光电化学、电催化等方面有较好的效果,因而,受到人们极大的关注．化学工作者已成功地制备出许多染料化学修饰电极,研究膜修饰电极的电化学行为［２,３］,而用循环伏安法和光谱技术对有机染料的电化学行为研究得较少［４,５］．本文对４ ［２ (４ Ｎ,Ｎ 二甲基苯胺基 )乙烯基］吡啶氧化物这个新改性的半菁化…     

钴(Ⅱ)取代铜锌超氧化物岐化酶金属重组衍生物的电化学和光谱电化学研究

80年代Hill等［"在蛋白质的电化学研究中加人氧化还原促进剂以提高电极反应速率．但最近的研究表明,电极材料的选择、蛋白质的纯度和溶液的离子强度等都影响反应速率和吸附行为［'．我们曾选用悬汞电极在不加促进剂的情况下研究铜锌超氧化物歧化酶Cu。Zn。SOD的电化学性质,并获得较好的结果［'j．本文研究了钻（I）取代铜锌超氧化物歧化酶CO。CO。SOD的氧化还原行为,首先用热解石墨电极对CO。CO。SOD进行循环伏安研究,获得了电极反应为扩散控制的可逆的电化学过程;然后用光谱电化学技术进行论证,由2种方法得到了在CO。CO。…     

掺锰氢氧化镍的结构与电化学性能

采用化学共沉淀法制备了锰取代的氢氧化镍样品，应用XRD技术对不同锰含量样品的相结构进行了表征，并用恒电流充放电、电流脉冲弛豫法和电化学阻抗技术研究了样品的电化学行为. XRD结果显示：锰含量少于20％时，样品主要由β相组成；而当锰含量达到28.3%时，可以得到具有纯α相结构的样品. 电化学研究结果表明：掺锰的氢氧化镍样品具有优良的电化学循环稳定性；锰的掺杂提高了氢氧化镍电极的析氧电位，增大了样品的质子扩散系数； 具有较低锰含量的氢氧化镍样品显示了较大的放电容量和较高的放电电位.     

苯甲酸在疏水性复合电极上的电化学还原行为

以铜片和锌片为基材,复合电镀制得Cu-PTFE(聚四氟乙烯)和Zn-PTFE疏水性复合电极,并将复合电极应用于苯甲酸的电化学还原行为研究。测定了复合电极在电解液中的Tafel极化曲线、循环伏安、电极稳定性和交流阻抗等电化学参数。结果表明,在苯甲酸电还原制备苯甲醛中,Cu-PTFE复合电极相对于Zn-PTFE复合电极具有较高的催化活性,其电还原产率分别为88.4%和79.2%,因此,Cu-PTFE复合电极有望成为苯甲酸电化学还原制备苯甲醛的电极材料。电化学行为的研究结果显示,苯甲酸在疏水性复合电极上的电还原过程可能只受电子迁移过程控制。     

Synthesis and electrooptical properties of triphenylamine- and oxadiazole-containing polymers

Soluble aromatic polyimides and copolyimides are synthesized on the basis of 4,4′-diaminotriphenylamine and oxadiazole-containing diamines. Poly(ester oxadiazoles) are prepared from acid dichlorides or oxadiazole-containing acid dihydrazides. The optical, electrochemical, and thermal properties of the polymers are investigated. It is shown that oxadiazole-containing polyimides and poly(ester oxadiazoles) are able to transfer electrons, while triphenylamine-containing polyimides and copolyimides can transfer holes and electrons.     

The synthesis and thermal,optical and electrical properties of novel aromatic–aliphatic five- and six-membered thermotropic polyimides

Polymers have been prepared by the polycondensation of 4,4′-(butane-1,4-diylbis(oxy)) bis(butane-4,1-diyl) bis(4-aminobenzoate) and 5,10,15,20,25,30,35,40,45,50,55,60-dodecaoxatetrahexacontane-1,64-diyl bis(4-aminobenzoate) (PBBA 1200) with three dianhydrides based on naphthalene, perylene and phthalic moieties, respectively. This has resulted in five novel aliphatic–aromatic polyimides. The polyimides differed in aliphatic chain length and whether the imide ring was five- or six-membered. The chemical structure of the polyimides has been confirmed by ¹H NMR and FTIR spectroscopy and by elemental analysis. The optical and electrical properties of the polyimides have been studied using current–voltage measurements, and the effect of the polyimide structure on thermal and mesomorphic behaviour investigated by differential scanning calorimetry and polarising optical microscopy. Wide-angle X-ray diffraction at different temperatures was employed to confirm the structural properties of the polyimides. All the novel polyimides, with the sole exception of that obtained from PBBA1200 and 3,4,9,10-perylenetetracarboxylic dianhydride, showed liquid crystalline properties. As far as we are aware, this is the first time that six-membered polyimides exhibiting liquid crystalline properties have been reported.     

Synthesis, characterization and H2O2-sensing properties of pyrimidine-based hyperbranched polyimides

A series of hyperbranched polyimides having pyrimidine core in the backbone was prepared by solution polycondensation of pyromellitic dianhydride (A₂ type) and 2,4,6-triaminopyrimidine (B₃ type). The resulting polyimides were characterized by IR, GPC, DTA, DSC, TGA, density and viscosity measurement. The results showed that polyimides were obtained in 82-86% yield, had inherent viscosities of 1.58-1.87 dL/g and highly thermal stability. From the solubility tests, it was found that all the polyimides were soluble in NMP, DMAc and DMSO at room temperature. In addition, because of their interesting film properties, attempts were made to prepare H₂O₂-sensing polyimide material. For this reason, selectivity of film-coated electrodes obtained from the chemically prepared hyperbranched polyimides toward electroactive (ascorbic acid, oxalic acid and hydrogen peroxide) and non-electroactive (lactose, sucrose and urea) species was examined by means of CV, DPV and TB techniques. From the electrochemical data obtained, it has been demonstrated that polyimide (HPI-2) film responded to only hydrogen peroxide among the species examined. In other words, it has been claimed that the mentioned polyimide-coated electrode can be used as H₂O₂-selective membrane in the presence of the electroactive and non-electroactive interferents.     

Designing aromatic polyamides and polyimides for gas separation membranes

Aromatic polyamides and polyimides with improved gas permselectivity, can be designed and prepared by systematically changing structural elements that affect these properties. Indeed, a conscientious choosing of the chemical changes may still provide a promising approach to get better and better polymers for selective filtration of gases. The results of this work, in which novel monomers have been used, have confirmed that gas permeability through aromatic polyamides and polyimides much higher than that of conventional polyamides and polyimides can be achieved. It has been done by introducing bulky side groups, using non-planar monomers, and combining these elements on both monomers: diamines and dianhydrides or diamines and diacids. A theoretical study has also been made to explain the behaviour of some individual polymers, comparing experimental and calculated values of density and free volume.     

Electrochemical studies for the electroactivity of amine-capped aniline trimer on the anticorrosion effect of as-prepared polyimide coatings

The electroactive polyimide consisting of various content of amine-capped aniline trimers (ATs) have been successfully synthesized and characterized by Fourier-Transformation infrared and UV-visible absorption spectroscopy. The electroactivity of as-prepared polyimides was tested by electrochemical cyclic voltammetry (CV) studies. It was noticed that the as-prepared electroactive polyimide with higher content of amine-capped ATs shows higher electroactivity (i.e., larger redox current) than that of non-electroactive polyimide, leading to enhance corrosion protection efficiency on cold-rolled steel (CRS) electrodes. This enhanced corrosion protection efficiency has been explained based on a series of electrochemical measurements such as corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) studies in 5 wt-% NaCl electrolyte. This significant enhancement of corrosion protection on CRS electrodes as compared to non-electroactive polyimide might probably be attributed to the redox catalytic property of as-prepared electroactive polyimide coatings inducing the formation of passive layer of metal oxide.     

氰基乙烯基苯胺衍生物的电化学行为

本文利用循环伏安法研究了电子给-受体模型化合物——氰基乙烯基苯胺衍生物的电化学行为,并对推电子取代基团—NH_2和—N(CH_3)_2与吸电子取代基团氰基乙烯基对化合物电化学行为的影响进行了较为详细的讨论.提出了这些化合物的电氧化态和电还原态的结构,通过分析比较叔、仲和伯自由基对化合物电化学行为的影响,探讨了电极反应机理.     

细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。     

Polyimides with alicyclic diamines. II. Hydrogen abstraction and photocrosslinking reactions of benzophenone-type polyimides

Photosensitive polyimides with alicyclic diamines and benzophenone moiety were prepared by reactions of 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) with diamines in aprotic solvents, followed by thermal or chemical imidizations. Among them the polyimide from BTDA and bis(4-amino-3-methylcyclohexyl) methane (DMDHM) can be dissolved in several organic solvents such as dichloromethane, tetrachloroethane, and N-methyl-2-pyrrolidone (NMP). In order to compare properties of the polyimides with alicyclic diamines with those of corresponding aromatic polyimides, the UV absorption spectra and fluorescence spectra of these polyimides and their model compounds were investigated. No occurrence of charge transfer at photoexcited states was ascertained for the polyimides with alicyclic diamines. The hydrogen abstraction and crosslinking during photoirradiation have been studied to learn the influence of the elimination of charge transfer process in these photosensitive polyimides. The quantum yield of hydrogen abstraction for the model compound of alicyclic polyimides is 0.56 in THF measured with HPLC. The quantum yield for the photocrosslinking reaction of the solvent-soluble polyimide with alicyclic diamine, PI(BTDA/DMDHM), was determined to be 0.004 in air from gel permeation chromatography (GPC) measurement, which is four times higher than that for photosensitive polyimides with aromatic diamines. © 1994 John Wiley & Sons, Inc.     

Preparation of phosphorus-containing polymers—XXIII: Phenoxaphosphine-containing polyimides

New phenoxaphosphine-containing polyimides were synthesized from 10-phenylphenoxaphosphine-2,3,7,8-tetracarboxylic dianhydride 10-oxide (IV) and diamines via polyamic acids in two steps. (IV) was prepared by dehydration of 10-phenylphenoxaphosphine-2,3,7,8-tetracarboxylic acid 10-oxide (III) derived from 2,3,7,8-tetramethyl-10-phenylphenoxaphosphine (I) or 2,3,7,8-tetramethyl-10-phenylphenoxaphosphine 10-oxide (II) by pyridine-permanganate oxidation. (I) was synthesized from bis(3,4-dimethylphenyl)ether and phenylphosphonous dichloride by the Friedel-Crafts reaction. The resulting polyimides had reduced viscosities of 0.13–0.84 di/g in cone H₂SO₄ at 30°. They were also soluble in dichloroacetic acid and some of them dissolved in DMA, DMSO. DMF and chloroform. Aromatic phenoxaphosphine-containing polyimides exhibited excellent thermal properties and hardly degraded below about 500°; the aliphatic polyimides decomposed at around 500. The aromatic polyimides had thermal stability similar or superior to aromatic polypyromellitimides and better heat resistance than linear open-chain phosphorus-containing polyimides. These polyimides showed retardance to inflammation.     

脂环族聚酰亚胺及其液晶取向膜材料

综述了近年来在脂环族聚酰亚胺领域内的研究进展,从单体的合成方法和分类以及脂环族聚酰亚胺的合成方法和实际应用等几方面系统阐述了该领域的研究进展,并着重讨论了其作为液晶显示器取向膜材料中的应用。