Dopant‐Free Squaraine‐Based Polymeric Hole‐Transporting Materials with Comprehensive Passivation Effects for Efficient All‐Inorganic Perovskite Solar Cells

Development of high‐performance dopant‐free hole‐transporting materials (HTMs) with comprehensive passivation effects is highly desirable for all‐inorganic perovskite solar cells (PVSCs). Squaraines (SQs) could be a candidate for dopant‐free HTMs as they are natural passivators for perovskites. One major limitation of SQs is their relatively low hole mobility. Herein we demonstrate that polymerizing SQs into pseudo two dimensional (2D) p–π conjugated polymers could overcome this problem. By rationally using N,N‐diarylanilinosquaraines as the comonomers, the resulting polysquaraine HTMs not only exhibit suitable energy levels and efficient passivation effects, but also achieve very high hole mobility close to 0.01 cm^?2 V^?1 s^?1. Thus as dopant‐free HTMs for α‐CsPbI₂Br‐based all‐inorganic PVSCs, the best PCE reached is 15.5 %, outperforming those of the doped‐Spiro‐OMeTAD (14.4 %) based control devices and among the best for all‐inorganic PVSCs.     

Positional Effect of the Triphenylamine Group on the Optical and Charge‐Transfer Properties of Thiophene‐Based Hole‐Transporting Materials

Hybrid organic‐inorganic perovskite solar cells (PSCs) have shown significant potential for use in the energy field. Typically, hole‐transporting materials (HTMs) play an important role in affecting the power conversion efficiency (PCE) of PSCs. A deep understanding of the structure‐property relationship plays a vital role in developing efficient HTMs. Herein, the relationship between the structure and properties of two small organic HTMs H2,5 and H3,4 were systematically investigated in terms of the electronic and optical properties, the hole‐transporting behavior by using density functional theory (DFT) and Marcus electron transfer theory. The results demonstrated that the high power conversion efficiency of the H2,5‐ based PSC was caused by strong interactions with the perovskite material on the interface and an enhanced hole mobility in H2,5 compared with H3,4 . The strong interaction derives from the short bond length of O atom of HTM and Pb atom of perovskite material, and the highly hole mobility derives from the quasi‐planar conjugated conformation and tight packing model of neighboring molecules in H2,5 . In addition, we found that the planar structure enhances the intermolecular interaction between HTM and perovskite materials compared with the ′V′‐shaped molecule. Importantly, we also note that the HOMO level of the isolated molecule is not always proportional to the open‐circuit voltages of PSCs since the HOMO level might move toward a higher level when the interaction between HTM and interface of perovskite was included. The work gives essential information for rational designing efficient HTMs.     

Indeno[1,2‐b]carbazole as Methoxy‐Free Donor Group: Constructing Efficient and Stable Hole‐Transporting Materials for Perovskite Solar Cells

With perovskite‐based solar cells (PSCs) now reaching efficiencies of greater than 20 %, the stability of PSC devices has become a critical challenge for commercialization. However, most efficient hole‐transporting materials (HTMs) thus far still rely on the state‐of‐the‐art methoxy triphenylamine (MOTPA) donor unit in which methoxy groups usually reduce the device stability. Herein, a carbazole‐fluorene hybrid has been employed as a methoxy‐free donor to construct organic HTMs. The indeno[1,2‐b]carbazole group not only inherits the characteristics of carbazole and fluorene, but also exhibits additional advantages arising from the bulky planar structure. Consequently, M129, endowed with indeno[1,2‐b]carbazole simultaneously exhibits a promising efficiency of over 20 % and superior long‐term stability. The hybrid strategy toward the methoxy‐free donor opens a new avenue for developing efficient and stable HTMs.     

Inexpensive Hole‐Transporting Materials Derived from Tröger's Base Afford Efficient and Stable Perovskite Solar Cells

The synthesis of three enamine hole‐transporting materials (HTMs) based on Tröger's base scaffold are reported. These compounds are obtained in a three‐step facile synthesis from commercially available materials without the need of expensive catalysts, inert conditions or time‐consuming purification steps. The best performing material, HTM3, demonstrated 18.62 % PCE in PSCs, rivaling spiro‐OMeTAD in efficiency, and showing markedly superior long‐term stability in non‐encapsulated devices. In dopant‐free PSCs, HTM3 outperformed spiro‐OMeTAD by a factror of 1.6. The high glass‐transition temperature (T_g=176 °C) of HTM3 also suggests promising perspectives in device applications.     

Dithieno[3,2‐b:2′,3′‐d]pyrrole Cored p‐Type Semiconductors Enabling 20 % Efficiency Dopant‐Free Perovskite Solar Cells

Organic p‐type semiconductors with tunable structures offer great opportunities for hybrid perovskite solar cells (PVSCs). We report herein two dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) cored molecular semiconductors prepared through π‐conjugation extension and an N‐alkylation strategy. The as‐prepared conjugated molecules exhibit a highest occupied molecular orbital (HOMO) level of ?4.82 eV and a hole mobility up to 2.16×10^?4 cm² V^?1 s^?1. Together with excellent film‐forming and over 99 % photoluminescence quenching efficiency on perovskite, the DTP based semiconductors work efficiently as hole‐transporting materials (HTMs) for n‐i‐p structured PVSCs. Their dopant‐free MA_0.7FA_0.3PbI_2.85Br_0.15 devices exhibit a power conversion efficiency over 20 %, representing one of the highest values for un‐doped molecular HTMs based PVSCs. This work demonstrates the great potential of using a DTP core in designing efficient semiconductors for dopant‐free PVSCs.     

3,4‐Phenylenedioxythiophene (PheDOT) Based Hole‐Transporting Materials for Perovskite Solar Cells

Two new electron‐rich molecules based on 3,4‐phenylenedioxythiophene (PheDOT) were synthesized and successfully adopted as hole‐transporting materials (HTMs) in perovskite solar cells (PSCs). X‐ray diffraction, absorption spectra, photoluminescence spectra, electrochemical properties, thermal stabilities, hole mobilities, conductivities, and photovoltaic parameters of PSCs based on these two HTMs were compared with each other. By introducing methoxy substituents into the main skeleton, the energy levels of PheDOT‐core HTM were tuned to match with the perovskite, and its hole mobility was also improved (1.33×10^?4 cm² V^?1 s^?1, being higher than that of spiro‐OMeTAD, 2.34×10^?5 cm² V^?1 s^?1). The PSC based on MeO‐PheDOT as HTM exhibits a short‐circuit current density (J_sc) of 18.31 mA cm^?2, an open‐circuit potential (V_oc) of 0.914 V, and a fill factor (FF) of 0.636, yielding an encouraging power conversion efficiency (PCE) of 10.64 % under AM 1.5G illumination. These results give some insight into how the molecular structures of HTMs affect their performances and pave the way for developing high‐efficiency and low‐cost HTMs for PSCs.     

Direct C−H Arylation Meets Perovskite Solar Cells: Tin‐Free Synthesis Shortcut to High‐Performance Hole‐Transporting Materials

In contrast to the traditional multistep synthesis, we demonstrate herein a two‐step synthesis shortcut to triphenylamine‐based hole‐transporting materials (HTMs) through sequential direct C?H arylations. These hole‐transporting molecules are fabricated in perovskite‐based solar cells (PSCs) that exhibit promising efficiencies up to 17.69 %, which is comparable to PSCs utilizing commercially available 2,2′,7,7′‐tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the HTM. This is the first report describing the use of step‐saving C?H activations/arylations in the facile synthesis of small‐molecule HTMs for perovskite solar cells.     

Minimization of Carrier Losses for Efficient Perovskite Solar Cells through Structural Modification of Triphenylamine Derivatives

Three hole transport materials (HTMs) based on a substituted triphenylamine moiety have been synthesized and successfully employed in triple‐cation mixed‐halide PSCs, reaching efficiencies of 19.4 %. The efficiencies, comparable to those obtained using spiro‐OMeTAD, point them out as promising candidates for easily attainable and cost‐effective alternatives for PSCs, given their facile synthesis from commercially available materials. Interestingly, although all these HTMs show similar chemical and physical properties, they provide different carrier recombination kinetics. Our results demonstrate that is feasible through the molecular design of the HTM to minimize carrier losses and, thus, increase the solar cell efficiencies.     

Molecular Engineering of Star-Shaped Indoline Hole Transport Materials: The Influence of Planarity on the Hole Extraction and Transport Processes

As the key properties of perovskite solar cells (PSCs), the hole extraction and transport capabilities of the hole transport material (HTM) affect the photovoltaic performance of PSCs to a considerable extent, while both capabilities can be adjusted by molecular planarity. Therefore, in this work, the molecular planarity of the HTM is systematically optimized to regulate the hole extraction and transport capabilities. Along with the improvement in planarity, the HTM′s HOMO level is increased, leading to the enhancement of hole extraction capability. Meanwhile, the hole transport capability can also be improved due to the intensification of molecular stacking during the film formation. As a result, the planar HTM achieves a relatively high efficiency of 18.48 %, which is higher than that of spiro-OMeTAD. Accordingly, the molecular planarity presents an important impact on the photovoltaic performance of PSCs, providing us with a promising strategy for further optimization of efficient HTMs.     

Promising hole-transporting materials for perovskite solar cells: Modulation of the electron-deficient units in triphenylamine derivative-based molecules

Modulation of the electron-deficient π-bridge units in 4-methoxy-N-(4-methoxyphenyl)-N-phenylbenzenamine (MeTPA)-based hole-transporting materials (HTMs) is a significant approach to improve hole mobility of HTMs for perovskite solar cells (PSCs). In this study, a class of simple MeTPA-based HTMs (H1-H4) with different π-bridged electron-deficient units were designed for the purpose of providing a theoretical model to obtain potential MeTPA-based HTMs. The results indicated that H2 to H4 exhibit better performance, such as larger Stokes shifts, smaller exciton-binding energy, better stability, good solubility, and higher hole mobility, in comparison with the parental material H1. H2 to H4 materials with high hole mobility (5.45 × 10⁻⁴, 2.70 × 10⁻¹, and 3.99 × 10⁻³ cm² V⁻¹ second⁻¹, respectively) may embody promising HTMs to yield good performance in PSCs. Therefore, the useful information obtained regarding control of the electron-deficient π-bridge units of MeTPA-based HTMs is an effective way to obtain excellent HTMs for PSC applications.     

有机空穴传输材料在钙钛矿太阳电池中的应用

有机-无机杂化钙钛矿太阳电池(PSCs)由于其诸多优点得到广泛关注,而有机固态空穴传输材料(HTMs)代替液体电解质使其得到飞速的发展,提升了电池的效率和稳定性,已经成为PSCs的重要组成部分。目前应用于PSCs的空穴传输材料分为有机空穴传输材料和无机空穴传输材料两大类。无机空穴传输材料的可选择范围较窄,对应器件的光电转换效率相对较低。开发各类能级匹配、空穴迁移率高的有机空穴传输材料是提高器件效率和稳定性的有效手段,成为相关领域的研究热点。本文依据相对分子质量的大小,将应用于PSCs中的有机空穴传输材料分为小分子类和聚合物类空穴传输材料,详细评述了有机空穴传输材料分子结构对PSCs光电转换效率、填充因子、开路电压、短路电流和稳定性的影响,并对其能级、空穴迁移率的高低、添加剂的使用等进行了讨论。最后详细论述了有机空穴传输材料未来的研究重点和发展趋势。     

Non‐Planar and Flexible Hole‐Transporting Materials from Bis‐Xanthene and Bis‐Thioxanthene Units for Perovskite Solar Cells

Two new hole‐transporting materials (HTMs), BX‐OMeTAD and BTX‐OMeTAD , based on xanthene and thioxanthene units, respectively, and bearing p‐methoxydiphenylamine peripheral groups, are presented for their use in perovskite solar cells (PSCs). The novelty of the newly designed molecules relies on the use of a single carbon‐carbon bond ‘C?C’ as a linker between the two functionalized heterocycles, which increases the flexibility of the molecule compared with the more rigid structure of the widely used HTM spiro‐OMeTAD. The new HTMs display a limited absorbance in the visible region, due to the lack of conjugation between the two molecular halves, and the chemical design used has a remarkably impact on the thermal properties when compared to spiro‐OMeTAD. BX‐OMeTAD and BTX‐OMeTAD have been tested in ([(FAPbI₃)_0.87(MAPbBr₃)_0.13]_0.92[CsPbI₃]_0.08)‐based PSC devices exhibiting power conversion efficiencies of 14.19 and 16.55 %, respectively. The efficiencies reached, although lower than those measured for spiro‐OMeTAD (19.63 %), are good enough to consider the chemical strategy used as an interesting via to design HTMs for PSCs.     

Benzotrithiophene‐Based Hole‐Transporting Materials for 18.2 % Perovskite Solar Cells

New star‐shaped benzotrithiophene (BTT)‐based hole‐transporting materials (HTM) BTT‐1, BTT‐2 and BTT‐3 have been obtained through a facile synthetic route by crosslinking triarylamine‐based donor groups with a benzotrithiophene (BTT) core. The BTT HTMs were tested on solution‐processed lead trihalide perovskite‐based solar cells. Power conversion efficiencies in the range of 16 % to 18.2 % were achieved under AM 1.5 sun with the three derivatives. These values are comparable to those obtained with today's most commonly used HTM spiro‐OMeTAD, which point them out as promising candidates to be used as readily available and cost‐effective alternatives in perovskite solar cells (PSCs).     

Low-cost Cu-based inorganic hole transporting materials in perovskite solar cells: Recent progress and state-of-art developments

Perovskite solar cells (PSCs) are rapidly approaching as promising processes toward efficient energy harvesting technologies. High cost and low environmentally stable organic hole transporting materials (HTMs) are the main hurdles in their commercial realization. Perovskite community is actively looking for inorganic HTMs which will potentially yield into a pragmatic solution. Cu-based materials, e.g. Cu-based oxides, halides, and chalcogenides exhibit features like low production cost, suitable band alignment, and high hole mobility Due to these properties, Cu-based materials are being explored as potential HTMs in PSCs. Significant efforts are contributed toward using low-cost Cu-based materials because of high chemical stability, high carrier mobility, low-cost and the possibility of developing a very simple technique. The photo-physical properties, e.g. optical electronic structure, valence band engineering, and carrier mobility are briefly discussed. Detailed insights toward understanding the development of Cu-based HTMs along with their possible pragmatic commercialization aspects are presented. This article highlights the utilization of Cu-based chalcogenide HTM and role of ternary Cu-based chalcopyrite, Pnma ternary chalcogenides, sulvanite and oxychalcogenides in the field of PSC with a brief idea about tailoring their optoelectronic properties. This article will significantly help the community toward the engineering of novel Cu-based HTMs for possible commercialization of PSC technology.     

Highly efficient perovskite solar cells based on symmetric hole transport material constructed with indaceno[1,2-b:5,6-b']dithiophene core building block

Two novel hole transport materials (HTMs) with indaceno[1,2-b:5,6-b']dithiophene (IDT) as core building blocks,termed IDT1 and IDT2,were designed and synthesized.The side alkyl chains were introduced to regulate and control the morphology and stacking behavior of HTMs,and the peripheral triarylamine arms were introduced to adjust the energy levels and to facilitate efficient hole transport.Applied in mesoporous structured perovskite solar cells (PSCs),HTM IDT1 achieved higher power conversion efficiency (PCE,19.55%) and better stability than Spiro-OMeTAD (19.25%) and IDT2 (15.77%) based PSC.These results suggest the potential of IDTl as a promising HTM for PSCs.     

Metallated Macrocyclic Derivatives as a Hole – Transporting Materials for Perovskite Solar Cells

Spiro‐OMeTAD is widely used as thehole‐transporting material (HTM) in perovskite solar cells (PSC), which extracts positive charges and protects the perovskite materials from metal electrode, setting a new world‐record efficiency of more than 20 %. Spiro‐OMeTAD layer engross moisture leading to the degradation of perovskite, and therefore, has poor air stability. It is also expensive therefore limiting scale‐up, so macrocyclic metal complex derivatives (MMDs) could be a suitable replacement. Our review covers low‐cost, high yield hydrophobic materials with minimal steps required for synthesis of efficient HTMs for planar/mesostructured PSCs. The MMDs based devices demonstrated PCEs around 19 % and showed stability for a longer duration, indicating that MMDs are a promising alternative to spiro‐OMeTAD and also easy to scale‐up via solution approach. Additionally, this review describes how optical and electrical properties of MMDs change with chemical structure, allowing for the design of novel hole‐mobility materials to achieve negligible hysteresis and act as effective functional barriers against moisture which results in a significant increase in the stability of the device. We provide an overview of the apt green‐synthesis, characterization, stability and implementation of the various classes of macrocyclic metal complex derivatives as HTM for photovoltaic applications.     

Self‐Assembly of Hybrid Oxidant POM@Cu‐BTC for Enhanced Efficiency and Long‐Term Stability of Perovskite Solar Cells

The controllable oxidation of spiro‐OMeTAD and improving the stability of hole‐transport materials (HTMs) layer are crucial for good performance and stability of perovskite solar cells (PSCs). Herein, we report an efficient hybrid polyoxometalate@metal–organic framework (POM@MOF) material, [Cu₂(BTC)_4/3(H₂O)₂]₆[H₃PMo₁₂O₄₀]₂ or POM@Cu‐BTC, for the oxidation of spiro‐OMeTAD with Li‐TFSI and TBP. When POM@Cu‐BTC is introduced to the HTM layer as a dopant, the PSCs achieve a superior fill factor of 0.80 and enhanced power conversion efficiency 21.44 %, as well as improved long‐term stability in an ambient atmosphere without encapsulation. The enhanced performance is attributed to the oxidation activity of POM anions and solid‐state nanoparticles. Therefore, this research presents a facile way by using hybrid porous materials to accelerate oxidation of spiro‐OMeTAD, further improving the efficiency and stability of PSCs.     

Lowering Molecular Symmetry To Improve the Morphological Properties of the Hole‐Transport Layer for Stable Perovskite Solar Cells

Inspired by the structural feature of the classical hole‐transport material (HTM), Spiro‐OMeTAD, many analogues based on a highly symmetrical spiro‐core were reported for perovskite solar cells (PSCs). However, these HTMs were prone to crystallize because of the high molecular symmetry, forming non‐uniform films, unfavorable for the device stability and large‐area processing. By lowering the symmetry of spiro‐core, we report herein a novel spirobisindane‐based HTM, Spiro‐I, which could form amorphous films with high uniformity and morphological stability. Compared to the Spiro‐OMeTAD‐based PSCs, those containing Spiro‐I exhibit similar efficiencies for small area but higher ones for large area (1 cm²), and especially much higher air stability (retaining 80 % of initial PCE after 2400 h storage without encapsulation). Moreover, the Spiro‐I can be synthesized from a cheap starting material bisphenol A and used with a small amount for the device fabrication.     

Recent studies on small molecular and polymeric hole-transporting materials for high-performance perovskite solar cells

A decade of significant research has led to the emergence of photovoltaic solar cells based on perovskites that have achieved an exceptionally high-power conversion efficiency of 26.08%. A key breakthrough in perovskite solar cells (PSCs) occurred when solid hole-transporting materials (HTMs) replaced liquid electrolytes in dye-sensitized solar cells (DSSCs), because HTMs play a crucial role in improving photovoltaic performance as well as cell stability. This review is mainly focused on the HTMs that are responsible for hole transport and extraction in PSCs, which is one of the crucial components for efficient devices. Here, we have reviewed small molecular as well as polymeric HTMs that have been reported in the last two years and discussed their performance based on the analysis of their molecular architectures. Finally, we include a perspective on the molecular engineering of new functional HTMs for highly efficient stable PSCs.     

Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material

The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine(CuPc-DMP) via only two simple steps,has been incorporated as a hole-transporting material(HTM) in mesoscopic perovskite solar cells(PSCs).The optimized devices based on such a HTM afford a very competitive power conversion efficiency(PCE) of up to 17.1%measured at 100 mW cm~(-2) AM 1.5G irradiation,which is on par with that of the well-known 2,2',7,7'-tetrakis(N'N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene(spiro-OMeTAD)(16.7%) under equivalent conditions.This is,to the best of our knowledge,the highest value reported so far for metal organic complex-based HTMs in PSCs.The advantages of this HTM observed,such as facile synthetic procedure,superior hole transport characteristic,high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs.The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.