基于发射光谱诊断的低温等离子体技术转化N2/NO气氛中NO的研究

建立了低温等离子体技术处理N₂/NO气氛中NO的实验系统,利用介质阻挡放电发射光谱诊断法分析了NTP技术处理NO的反应机理,以及研究了NTP系统的运行参数和N₂体积流量对NO转化率的影响规律。研究结果表明,随着V（_P-P）的增加,N₂发射光谱强度相对于NO发射光谱强度的比值增加,N₂第二正带系发射光谱强度增加,表明放电区间的高能电子浓度增大,有利于N₂离解成N原子,从而促使NO还原转化;增加N₂体积流量会使NO转化率降低,NO₂浓度升高。     

O2/CO2气氛下CO对煤焦异相还原NO影响的研究

为揭示O₂/CO₂燃烧过程中高浓度的CO对煤焦异相还原NO的影响,在1073 K温度下使用山西褐煤在卧式炉上进行了实验。分别对O₂/CO₂浓度比及CO浓度下NO的还原特性进行详细实验研究。研究结果表明:在O₂/CO₂气氛下,O₂浓度为30%时具有较高的还原率;相同O₂浓度下O₂/CO₂气氛较空气气氛NO还原率高,表明在CO存在的条件下,高浓度的CO₂会促进NO的还原;当CO浓度从1.5%逐渐升高时,NO的还原率逐渐降低,到CO浓度为5%时,NO还原率比没有加入CO时还要低,而在空气气氛下CO浓度的变化对NO的还原率影响较小。     

O2/CO2气氛下循环流化床煤燃烧SO2排放

在热输入功率50 kW的循环流化床O₂/CO₂燃烧试验装置上研究燃煤SO₂排放特性及石灰石脱硫机理。结果发现,未添加石灰石时,O₂/CO₂气氛下SO₂排放量比相同O₂浓度的空气气氛下低;随着O₂浓度的升高,排放量升高。相同钙硫摩尔比下,O₂/CO₂气氛下石灰石的脱硫机理以直接脱硫为主,脱硫效率比空气气氛下高;随着O₂浓度的增加,石灰石脱硫效率提高。     

不同初始温度下H2/O2混合物等离子体的演化

本文对不同初始温度下,H₂/O₂混合物等离子体中主要粒子随时间发展的演化规律进行了数值模拟,得到了放电后等离子体中主要带电粒子和中性粒子密度随时间的变化规律.计算结果表明,H₂/O₂混合物等离子体中主要活性粒子密度随时间的增加减小,化学反应达到平衡所需的时间随初始温度升高逐渐减少. 关键词： 等离子体 化学过程 数值模拟 演化     

大气等离子体中氮氧化物粒子行为的数值模拟

利用一个空间零维大气等离子体模型对其中的氮氧化物在不同电离度情况下的变化规律进行了数值模拟,得到了放电后不同初始电子密度下的氮氧化物(包括NO,NO⁺,NO₂,NO₂⁺,N₂O,N₂O⁺,NO₃和N₂O₅)及影响其产消的主要反应物N和O₃的密度随时间的演化规律.结果表明,电子初始密度n_e0=10⁹ cm^-3时,NO和NO₂的去除率较高,氮氧化物总密度较小,最适合消除氮氧化物污染.同时,还对N和O₃随电离度变化的行为进行了分析. 关键词： 大气等离子体 氮氧化物 电离度 数值模拟     

合成温度和N2/O2流量比对碳纤维衬底上生长的SnO2纳米线形貌及场发射性能影响

采用化学气相沉积法系统研究了合成温度和N₂/O₂流量对生长在碳纤维衬底上的SnO₂纳米线形貌及场发射性能的影响规律. 利用扫描电镜(SEM)、透射电镜(TEM), X射线衍射(XRD)及能谱仪(EDS)对产物细致表征, 结果表明, SnO₂纳米线长径比随反应温度的升高而增大; 随N₂/O₂流量比值的增大先增大后变小, 场发射测试表明, 合成温度780 ℃, N₂/O₂流量比为300 : 3 时SnO₂纳米线阵列具有最佳的场发射性能, 开启电场为1.03 V/μm, 场强增加到1.68 V/μm时, 发射电流密度达0.66 mA/cm², 亮度约2300 cd/m².     

射频功率对辉光放电H2/C4H8等离子状态的影响

采用辉光放电技术和等离子体质谱诊断技术,研究了H₂/C₄H₈混合气体等离子体中正离子成分及主要正离子能量随射频功率的变化规律,并分析了H₂/C₄H₈混合气体主要的离解机理和形成过程.研究表明:随着射频功率的增加,碳氢碎片离子的浓度增加,在20 W时达到最大值,25 W后有所减小.当射频功率小于10 W时,H₂/C₄H₈混合气体等离子体中C₄H₉⁺相对浓度最大,当功率大于或等于10 W时,C₃H₃⁺相对浓度最大.随着射频功率的增大,碳氢碎片离子的能量逐渐增加.对H₂/C₄H₈混合气体等离子体的组成与能量进行的定性分析,将为H₂/C₄H₈混合气体辉光放电聚合物涂层工艺参数优化提供参考.     

基于光声光谱技术的NO,NO2气体分析仪研究

NO, NO₂是大气污染源中的常见气体, 对环境具有严重的危害性. 为检测污染源中这两种气体的浓度, 构建了成本较低的基于红外热辐射光源的光声光谱气体检测系统. 分析计算得到了NO, NO₂ 在2500–6667 nm波段吸收谱线. 通过建立光声传输线RLC振荡电路模型和仿真得到品质因数、声压大小与谐振腔长、内腔半径以及调制频率的关系, 据此设计了光声池几何结构. 实验表明该系统所测得的光声信号与气体浓度有很好的线性关系, 并且对NO, NO₂气体极限检测灵敏度分别达到4.01 和1.07 μL. 通过调节激光发射波长和选取滤波片, 该系统还可用于其他微量气体的浓度检测. 关键词： 大气污染 光声光谱 气体检测     

CHF3双频电容耦合放电等离子体特性研究

研究了用于SiCOH 低介电常数薄膜刻蚀的CHF₃气体在1356 MHz/2 MHz,2712 MHz/2 MHz和60 MHz/2 MHz双频电容耦合放电时的等离子体性质.发现2 MHz低频源功率的增大主要导致F基团密度的增大;而高频频率从1356,2712增大到60 MHz,导致CF₂基团的密度增大和电极之间F基团密度的轴向空间不均匀性增加.根据电子温度的分布规律及离子能量随高频源频率的变化关系,提出CF₂基团的产生主要通过电子-中性气体碰撞,而F基团的产生是离子-中性气体碰撞的结果. 关键词： 双频电容耦合放电 3等离子体')" href="#">CHF₃等离子体     

H2对N2直流辉光放电电子行为的影响

通过用Monte Carlo方法模拟N₂-H₂ 混合气体直流辉光放电等离子体快电子行为，从不同H₂浓度的电子能量分布函数，电子密度以及e_f-N₂碰撞率等方面，研究了加H₂对氮辉光放电等离子体过程的影响. 研究结果表明: 随着H₂浓度的升高，电子的平均能量增加, 电子密度及e_f-N₂的各种非弹性碰撞率减小; 但在 关键词： 2-H₂辉光放电')" href="#">N₂-H₂辉光放电 Monte Carlo模拟 2碰撞率')" href="#">e-N₂碰撞率     

Effects of fly ash on NOx removal by pulsed streamers

NO_x removal methods using plasma chemical reactions in nonthermal plasmas have been widely studied. In this paper, the effects of the addition of fly ash on NO_x removal using short-pulsed discharge plasmas are described. Fly ash which had been collected from a coal-burning thermal electrical power plant was used. Experiments were performed using four different mixtures of gases which included NO. These were (N₂+NO), (N₂+NO+O₂), (N₂+NO+H₂O), and (N₂+NO+O₂+H ₂O). These gas mixtures were used either with or without the addition of fly ash. The initial concentration of NO was fixed at 200 ppm (NO parts per million of the gas mixture), The study of the NO_x (NO+NO₂) removal was performed with the fly ash, as it is relevant to real situations in coal power plants. The results show that the presence of fly ash decreased the NO_x removal rate slightly in the case of dry gas mixtures while it increased the NO_x removal rate substantially in the case of wet gas mixtures. These results suggest that the presence of fly ash in the flue gases, which also contain a few percentages of moisture, would be advantageous to the treatment of flue gases emitted from thermal power plants for the removal of nitrogen oxides     

Comparison of electrical discharge techniques for nonthermal plasmaprocessing of NO in N2

This paper presents a comparative assessment of three types of electrical discharge reactors: 1) pulsed corona, 2) dielectric-barrier discharge, and 3) dielectric-pellet bed reactor. The emphasis is on the efficiency for electron-impact dissociation of N₂(e+N₂ →e+N+N) and the subsequent chemical reduction of NO by nitrogen atoms (N+NO→N₂+O). By measuring the concentration of NO as a function of input energy density in dilute mixtures of NO in N₂, it is possible to determine the specific energy cost for the dissociation of N₂. Our experimental results show that the specific energy consumption (eV per NO molecule reduced) of different types of electrical discharge reactors are all similar. These results imply that, during radical production in electrical discharge reactors, the electric field experienced by the plasma is space-charge shielded to approximately the same value. The specific energy consumption for the dissociation of N₂ using electrical discharge processing is measured to be around 240 eV per nitrogen atom produced. In the NO-N₂ mixture, this corresponds to a specific energy consumption of around 240 eV per NO molecule reduced     

第一性原理研究O2在TiN4掺杂石墨烯上的氢化

作为一种新型高效质子交换膜燃料电池阴极材料, 金属与N共掺杂的石墨烯因其对氧还原反应具有较高的活性而引起了人们的广泛关注. 采用包含色散力校正的密度泛函理论方法系统地研究了O₂在TiN₄掺杂的Graphene上的吸附, 氢化特性. 结果表明: 1) O₂倾向于以side-on模式吸附在Ti顶位, 形成O-Ti-O三元环结构; 2) O₂在TiN₄-Graphene上更倾向于以分子形式直接氢化, 形式OOH结构, 并进一步解离为O+OH, 反应的限速步为O₂的氢化, 对应的反应势垒为0.52 eV.     

Structure and NO reactivity of Zr-deposited Pd surfaces

The structure and NO reactivity of Zr-deposited Pd surfaces were investigated by X-ray photoelectron spectroscopy, low-energy electron diffraction, infrared reflection absorption spectroscopy, and temperature-programmed desorption. Zr on Pd(1 0 0) was oxidized to ZrO₂ by exposure to O₂ at 773 K. Heating at 823 K in a vacuum led to decomposition of ZrO₂ to Zr metal and O₂. The activation energy for ZrO₂ decomposition changed remarkably at Θ_Zr = 0.4. For Θ_Zr > 0.4, a hexagonal structure was observed for ZrO₂/Pd(1 0 0); no ordered structure was observed for Θ_Zr < 0.4. Deposited Zr had no significant effect on the adsorption and decomposition of NO on Pd(1 0 0) but resulted in a creation of new NO dissociation sites on Pd(3 1 1). Zr on Pd(3 1 1) was oxidized to ZrO_X by oxygen produced from NO dissociation. Heating at 823 K in a vacuum led to decomposition of ZrO_X to Zr metal and O₂.     

基于飞秒激光引导高压放电的SF6分解物原位检测

气体绝缘开关设备(GIS)绝缘缺陷引发的放电会导致SF₆分解,分解产生的低氟硫化物与设备内的微量H₂O和O₂反应生成具有腐蚀性的物质,影响设备正常运行,因此,研究SF₆分解机理对GIS的安全运行具有重要意义。由于部分分解物在采样过程中发生转化,因此,实现SF₆分解物的原位检测对于研究SF₆分解机理是十分必要的。采用飞秒激光引导高压放电实现了高压放电空间和时间的精确控制,并利用飞秒激光引导高压放电产生的空间分辨光谱实现了SF₆分解物的原位测量。首先研究证明了飞秒激光不会引起SF₆的分解;其次,利用飞秒激光产生的等离子体通道实现了放电空间和时间的精确控制;最后,发现分解物中包含由于高能电子碰撞直接或间接产生的大量S和F的离子和原子。研究证明了基于飞秒激光引导高压放电可以实现SF₆分解物的原位检测,为开展高压放电下SF₆分解机理研究提供了一种新的研究手段。     

Particle-in-cell/Monte Carlo simulation of radio frequencySiH4/H2 discharges

In this paper we report on a study of SiH₄/H₂ radio-frequency discharges using the particle-in-cell/Monte Carlo (PIC/MC) method. A special procedure based on the rate balance for negative ions has been developed to speed up the simulation for this kind of electronegative discharge. The electron energy distribution function and the angular and energy distribution function of ions arriving at the substrate have been studied at different discharge settings (frequency, pressure, voltage, and power). The simulations show that the electrons are heated ohmically, so the average electron energy can be increased only by increasing the voltage. A high radical density, a high and more directional ion flux, and a low average ion energy can be obtained by a combination of a high frequency and a low RF voltage. The behavior of the dissociation rate with the discharge parameters is consistent with the experimentally observed consumption of SiH₄. The simulated ion energy distribution functions are in good agreement with experimental results     

Solid-state electrochemical CO2 sensor by coupling lithium ion conductor (Li2CO3-Li3PO4-Asl2O3) with oxide ion-electron mixed conductor (La0.9Sr0.1MnO3)

A solid-state electrochemical cell of the type O₂(air), PtLa_0.9Sr_0.1MnO₃/Li₂CO₃(+5 mol% Li₃PO₄ + 6 mol% Al₂O₃)/Au, CO₂, O₂ was composed to determine CO₂ concentration, where Li₂CO₃, a lithium ion conductor, was used as an electrolyte, and the perovskite-type oxide (La_0.9Sr_0.1MnO₃)/O₂-electrode as a reference electrode. The electromotive force (EMF) of the cell was found to be proportional to the logarithm of CO/₂ partial pressure in CO₂/O₂/N₂ gas mixtures at temperatures between 300 and 400 °C. The EMF responded to changes of CO₂ partial pressure within 1 min at 400 °C. The sensitivity to CO₂ of this cell was not affected by coexistence of O₂, and the EMF remained constant after the first 15 days. The mechanism for sensing CO₂ is discussed.     

Absorption coefficients of O3 at CO2 laser wavelengths

The O₃ absorption coefficients for the rotational lines P(12)–P(28) of the 9.4 μm emission band of the CO₂ laser are presented. Measurements were made in O₃–air dilute mixtures (20–600 ppm) at 25°C and a total pressure of 1013.25 h Pa using a frequency stabilized cw CO₂ laser and values have been determined with greater precision than in previously reported studies.