共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
针对变量马达-发电机-超级电容型的挖掘机动臂能量回收装置,以Matlab/Simulink为平台,结合Simscape模块建立仿真程序,代替真实的实验系统进行电机和发动机联合工作控制策略设计的任务,以简化实验,降低研发成本。以Simmechanics实现挖掘机动臂动力学特性模拟,以embedded function建立了泵、发动机、电机及能量回收系统等功能子模块,并以信号发生器实现通过负载模拟系统记录的流量和压力数据进行过程仿真。最后通过仿真实验验证了该程序的正确性。 相似文献
4.
建立了内置式温差发电器的物理和数学模型,并对该模型进行了详细的阐述,网格划分和数值仿真完成后,得到了稳态下内板的温度分布场。通过对内板温度场的研究和分析可以得到结论:降低冷却液温度和提高冷却液流速有助于提高内置式温差发电器的发电性能,梅花形结构内板的内置式温差发电器的发电性能比一字形结构内板的内置式温差发电器的发电性能更好。该结论对提高内置式温差发电器的发电性能和优化内置式温差发电器的结构有着重要作用。 相似文献
5.
6.
为了研究发动机停止/起动系统的节能机理及控制技术,通过分析系统的工作原理,开发了发动机停止起动系统的试验系统,试验系统由发动机停止起动系统控制单元ESS-ECU、制动能量回收模块、道路模拟模块、制动踏板模块、驱动电机模块、测控模块、车用传感器及发动机控制单元ECU等部分组成,并对发动机自动停止和自动起动工作过程进行了分析. 相似文献
7.
8.
9.
10.
介绍了汽车制动能量回收原理,分析了超级电容在制动能量回收方面的优势,设计了汽车制动能量回收试验台架,提出了制动能量回收的控制算法,测试了转速稳定性、起动电流等关键参数,验证了台架的可靠性。研究结果表明,试验台架能够模拟汽车制动能量,利用超级电容储存制动能量并将储存的能量用于起动。通过控制模块实时控制,实现对制动能量有效的回收及利用。惯性模拟飞轮转速稳定,上下波动在50r/min以内,可准确的模拟设定动能;直接利用超级电容起动发动机是可行的,起动峰值电流在200A以内;设计的能量回收控制算法执行有效。 相似文献
11.
Clarence W.DE SILVA 《Instrumentation》2019,(4):72-84
An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t... 相似文献
12.
The intersection of Quantum Technologies and Robotics Autonomy is explored in the present paper.The two areas are brought together in establishing an interdisci... 相似文献
13.
针对具有进油孔的有限长滑动轴承油膜力求解问题,采用变分原理和分离变量法,求得了有限长滑动轴承油膜压力分布的近似解析表达式。将油膜压力分布的近似解析表达式在油膜存在区域上进行积分,即得到了油膜力。将提出的计算有限长滑动轴承油膜力方法与无限长轴承模型、有限元方法的计算结果进行了比较,发现了提出的方法与有限元方法的计算结果很接近。最后,研究了进油孔位置和进油压力对油膜存在区域、油膜力等的影响,研究结果表明进油孔位置和进油压力对油膜存在区域和油膜力有较大的影响。 相似文献
14.
针对实际电网存在着大量的三绕组变压器,但国际上一些著名商业软件,如BPA仿真软件、Matpower这一权威潮流计算开源软件,均只提供双绕组变压器模型,限制了其在具有三绕组变压器的电力系统中的应用的问题,潮流计算是自主开发的电力系统各种应用软件的核心模块,因此依托国际权威开源程序进行二次开发,是一种较好的选择。对Matpower要求的数据格式进行了归纳,对变压器的一般的等值电路及带理想变压器的等值电路和带标幺值的等值电路进行了分析研究,提出了三绕组变压器转换为双绕组等效模型的建模方法,使得原先只适应双绕组变压器的潮流计算软件可以适用于三绕组变压器电网的潮流计算;最后以Matpower软件为例进行了案例计算,并用PSASP仿真软件进行对比验证。研究结果证明,所提出的建模方法是有效的。 相似文献
15.
A computer simulation model for the contact between longitudinally-oriented rough surfaces has been formulated. This model closely duplicates the actual surf ace contact deformation behavior by taking into account the elastic interactions between the asperities. There were no assumptions made about the shapes, or any deformation behavior of the asperities, except for their obeying the laws of elasticity. The plastic deformations on the high asperity peaks were taken into account by setting a ceiling on their contact pressures at the material hardness value. The simulations used real surface profiles which were digitized from unworn circumferentially ground steel surfaces. Each pair of these profiles was mathematically combined to form an equivalent rough profile pressing against an infinitely rigid flat and having the appropriately adjusted elastic modulus. A total of 28 different pairs of profiles were used in the simulations. Each contacting pair was subjected to 30 different load levels and the local contact pressures and deformations were calculated. The contact simulations yielded some important mathematical relationships between parameters, such as the real area of contact, average gap, and average asperity load through statistical curve fitting. Two analytical functions were generated to relate the average load to average gap and the real area of contact to load. 相似文献
16.
针对电站锅炉风险等级评价问题,将模糊综合评价技术应用到电站锅炉风险等级评价中。开展了电站锅炉失效影响因素及模糊评价因素的重要程度分析,建立了一套科学合理适于在线评价的电站锅炉风险评价体系,提出了模糊综合评价技术与改进的模糊层次分析法相结合的模糊风险评价方法,利用改进的模糊层次分析法计算了指标体系中各层指标权重。对某一台电站锅炉的实际运行工况影响子因素进行了模糊风险评价,采用模糊合成算子进行模糊综合运算得到电了站锅炉运行工况影响子因素的评价向量。研究结果表明:电站锅炉的运行工况影响子因素的风险评价等级为第6级,失效可能性等级为小,该电站锅炉运行工况良好。 相似文献
17.
30 keV Ga+ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z2, and shows a non-monotonic relationship between contrast and Z2. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z2, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory. 相似文献
18.
This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an... 相似文献
19.
分布动态载荷识别的抗噪处理 总被引:2,自引:2,他引:0
针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性. 相似文献
20.
针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。 相似文献