共查询到19条相似文献,搜索用时 93 毫秒
1.
相似机电产品系统杂交集成设计 总被引:7,自引:0,他引:7
基于相似学、相似系统理论和相似工程学原理,提出了集多种新优技术和特征信息于一体的杂交集成的新概念、类型与方式,杂交集成设计的基本原理与方法步骤。这将促进相似系统集成设计新方法的形成,为设计与制造不同相似程度的多样化、系列化高新技术机电产品系统的集成化,提供新的理论与方法。 相似文献
2.
单元化系统集成设计中的相似性与复杂性 总被引:5,自引:0,他引:5
基于相似性科学和相似系统理论,研究了机械系统中单元的特征相似性形成原理和相似度量方法、以单元为基础的相似机械系统建模原理和系统相似度数值方法、相似单元设计和单元化系统集成设计中的相似性与复杂性;提出了以系统相似性度量及其变化引起复杂性。集成设计系列化、多样化、个性化产品系统新的理论与方法。 相似文献
3.
浅谈相似理论与模型试验在机械设计中的应用 总被引:3,自引:0,他引:3
鲍培德 《机械设计与制造工程》2000,29(6):27-28
相似理论是模型试验设计方法的理论基础,利用相似理论可以解决机械设计中一般理论难以解决的问题。通过流体动力润滑向心滑动轴承模型试验,测定、表达了承载量系数与偏心率的关系,求得试验方程,并以此说明相似理论对机械设计工作具有指导意义。 相似文献
4.
5.
6.
离心通风机的相似设计(二) 总被引:1,自引:0,他引:1
介绍了通风机相似设计与相似换算中的几个主要公式、通风机的比直径、比转数、等积孔和等积孔系数的计算公式,最后对公式的综合应用做了举例。 相似文献
7.
本文利用相似设计理想探讨了圆柱形压缩螺旋弹簧的系列设计,从而获得了弹簧的几何尺寸和受力,变形相似的系列产品参数。 相似文献
8.
9.
10.
动力学相似理论广泛应用于大型结构的振动试验,其中畸变相似用于解决结构的设计参数不满足等比例缩放时的相似问题,针对畸变相似关系中幂数为定值导致预测精度低的问题,提出考虑变幂数的畸变动力学相似试验模型设计方法。首先,在敏感性分析与中心差分理论推导的幂数表达式的基础上,将中心差分的范围不断扩大得到一组随相似比变化的幂数。采用最小二乘法将这组幂数拟合为关于相似比的函数并建立相似关系。然后,在多盘转子系统的数值算例中将变幂数法与文献中的两种方法进行对比,结果表明,变幂数法的预测精度较文献中的方法有很大提高。最后,通过试验研究验证了数值算例中动力学模型及临界转速求解的正确有效性。相似关系的建立是以模型的临界转速为基础,因此也验证了数值算例中的相似预测结果。 相似文献
11.
12.
13.
14.
针对起重机械产品复杂、设计效率低的问题,提出了基于可拓距的起重机产品配置方法。建立了基于可拓距的相似度计算模型与权重值动态驱动模型,并将其应用于实例检索。分析了该方法与基于欧式距和海明距相似度计算方法的比较结果,验证了该方法的可行性与可靠性。 相似文献
15.
基于模糊集相似度量的机械设计方案决策 总被引:4,自引:0,他引:4
针对模糊集的推广形式———Vague集,描述了Vague集的含义与相似度量,并提出一种Vague集的相似度量在机械设计方案决策中的新方法。在机械设计方案决策中,Vague集之间的相似度量是评价设计方案接近期望方案(理想方案)的度量,相似度量值越大,设计方案接近期望方案越好。通过实例阐明Vague集之间的相似度量在机械设计方案决策中的可行性。 相似文献
16.
17.
机械运动方案相似设计研究 总被引:4,自引:1,他引:3
概念设计是产品开发过程中的决定性阶段 ,机械运动方案设计是机械产品概念设计的关键内容。本文提出了机械运动方案相似设计理论和方法 ,并对构造相似元、计算相似度、实例再设计等关键技术进行了研究 ,给出了相应的解决方法 相似文献
18.
Strategy and method of part reengineering 总被引:2,自引:1,他引:2
Fei Gao Gang Xiao Yuanming Zhang 《The International Journal of Advanced Manufacturing Technology》2007,34(3-4):219-226
Reducing part redundancy because of design arbitrariness is an effective measure of improving production volume, of which
part reengineering is a reasonable and effective approach. The problem was formalized, then similarity degree was measured
by Euclidean proximity through considering similar rules of parts based on properties of isostructure, geometry, precision,
material and performance indices. A similarity matrix could be constructed based on similarity degree, and part reengineering
arithmetic was advanced based on fuzzy clustering. Finally, analysis and adjustment of part reengineering scheme was discussed.
The strategy and method are effective in an instance of a motorcycle-hydraulic-disk brake disk reengineering. 相似文献
19.
Yu Tongmin Li Guanhua Li Youmin Lan Jian Key Laboratory for Precision Nontraditional Machining Technology of Ministry of Education Dalian University of Technology Dalian China 《机械工程学报(英文版)》2005,18(4):609-612
On the basis of the comprehensive analysis about the automatic generation of the injection mold parting surface,the parting surface design method which introduces knowledge and case-based reasoning (CBR) into the computer-aided design is described by combining with the actual characteristic in injection mold design,and the design process of case-based reasoning method is also given.A case library including the information of parting surface is built with the index of main shape features.The automatic design of the mold parting surface is realized combined with the forward-reasoning method and the similarity solution procedure.The rule knowledge library is also founded including the knowledge,principles and experiences for parting surface design.An example is used to show the validity of the method,and the quality and the efficiency of the mold design are improved. 相似文献