共查询到20条相似文献,搜索用时 109 毫秒
1.
本文主要阐述了如何成功地建立MIS(ManagementInformationSystem)企业管理信息系统。回顾了MIS系统的起源,发展过程及国内企业管理过程中对MIS系统的实际应用情况。 相似文献
2.
烤片机微机控制系统的软件设计安淑玉多年来,叶片复烤机的工艺参数一直备受烟草行业的关注,在叶片复烤机软件设计过程中我们首先完成了一套组态软件的开发,并以此作为系统软件。该系统运行环境为:主机IBM386以上;RAM要求4MB以上;硬盘要求40MB以上;... 相似文献
3.
本文以上海宏文造纸厂从美国Measurex公司引进的2002系统为例筒述了造纸质量水份(即B/M)测控系统的原理及其应用,安装,维护方面所取得的经验教训,供同行参考。 相似文献
4.
碱法化学浆制浆新方法付英娟,秦梦华山东轻工业学院济南250100关键词化学浆,碱法制浆,发展趋势,RDH系统,MCC系统,EMCC系统近几年来,在现行的碱法制浆工艺的基础上又开发了一些新的制浆方法。从下图可以看出碱法制浆技术的现状及其发展趋势。一、M... 相似文献
5.
6.
在讨论MRPⅡ基本原理与烟草企业自身特点的基础上,阐述了以MRPⅡ软件主要模块为核心,集成原有信息系统并辅以二次开发,最终建立基于Intranet的新型企业内部信息系统,这是新形势下的烟草企业计算机MIS系统应用模式。 相似文献
7.
我国服装CAD/CAM的使用与发展 总被引:4,自引:0,他引:4
该文论述了我国“六五”以来服装CAD/CAM系统开发情况以及国内外服装CAD/CAM系统在我国服装企业使用情况,分析了当前服装CAD在企业应用迅速增长的原因,从而提出了我国服装CAD/CAM系统今后研制发展的方向与技术关键。 相似文献
8.
本文介绍了ICS-TEXICON MM8000测配色系统和试验室自动滴液配液系统的特点。试验室采用自动滴配液系统,精度高,速度快,使打样速度提高了3~4倍,符样率由原来的47%提高到90%。文章还具体介绍了该系统的操作方法。 相似文献
9.
MDP2型大圆机的计算机花型准备系统 总被引:1,自引:0,他引:1
本文对MET计算机花型准备系统花型文件的存储格式及MKP2型机器的花型设计进行了分析,并据此提出一种用MET设计MDP2花型的方法,重点讨论了软件设备所应考虑的问题及实现方法。 相似文献
10.
在分析CVMS操作系统软硬件支持的基础上,提出了国产中西文终端GW220,CJ4010,HZ200A等作为VAX计算机终端时进入和使用CVMS操作系统的一种方法;比较了EDIT和HEDT两个编辑命令使用的异同;最后,通过建立LOGIN,COM命令过程,提出了进入CVMS系统更为方便的方法。 相似文献
11.
介绍了压缩制冷系统的原理和发展现状.汇总了系统常见的各类故障,分析了故障原因并介绍了解决方法.总结了实际运转中故障应对的经验,并提出了压缩制冷系统运行优化控制的建议. 相似文献
12.
本文简要介绍了聚乳酸的研究进展及其结构和性能特点,论述了熔喷聚乳酸非织造材料的生产工艺及要求,提出了目前聚乳酸熔喷非织造材料生产中面临的一些问题,并列举了该类产品主要的应用领域,最后提出了几点建议。 相似文献
13.
14.
Methods are described for the extraction and quantitation of endogenous barley thiols and disulphides. Thiols and disulphides, together with added internal standards, are extracted from ground barley tissues (embryos or degermed grains) and the thiols in the extract are trapped on columns of beaded p-hydroxymercuribenzoyl-agarose (p-HMB-agarose). After elution they are derivatised with 5,5′-dithiobis (2-nitrobenzoic acid) and the derivatives are separated and quantified by hplc. The disulphides in the effluent from the p-HMB-agarose column are collected on a silica-based ion exchange material. After elution they are reduced to thiols and, after derivatisation, they are assayed by hplc. Dry barley embryos contain substantial quantities of glutathione, progressively lesser quantities of oxidised glutathione, cystine and cysteine and traces of γ-glutamyl cysteine and cysteinyl glycine. 相似文献
15.
文章介绍了精纺双弹织物的设计思想,对纤维原料、纱线的线密度和捻系数确定、氨纶丝含量和预牵伸倍数的确定、织造、后整理等加工工艺进行了阐述,重点探讨了产品关键工序的工艺技术参数及操作要求,围绕影响产品质量的因素提出了具体的措施。 相似文献
16.
Susmit A. Ilame 《Critical reviews in food science and nutrition》2015,55(7):964-987
Fruit and vegetable juices are used due to convenience. The juices are rich in various minerals, vitamins, and other nutrients. To process the juices and their clarification and/or concentration is required. The membranes are being used for these purposes. These processes are preferred over others because of high efficiency and low temperature. Membranes and their characteristics have been discussed in brief for knowing suitability of membranes for fruit and vegetable juices. Membrane separation is low temperature process in which the organoleptic quality of the juice is almost retained. In this review, different membrane separation methods including Microfiltration, Ultrafiltration, and Reverse osmosis for fruit juices reported in the literature are discussed. The major fruit and vegetable juices using membrane processes are including the Reverse osmosis studies for concentration of Orange juice, Carrot juice, and Grape juice are discusses. The Microfiltration and Ultrafiltration are used for clarification of juices of mosambi juice, apple juice, pineapple juice, and kiwifruit juice. The various optimized parameters in membranes studies are pH, TAA, TSS, and AIS. In this review, in addition to above the OD is also discussed, where the membranes are used. 相似文献
17.
关于发展我国生态纺织品的建议 总被引:13,自引:7,他引:6
介绍了国际生态纺织品的标准动态,OKo-Tex Stiandard100标准的主要特点以及规定的主要检测项目与有害物质,并按照国际标准,分析了我国纺织工业存在的主要差距,并就此提高出发展我国生态纺织品的措施。 相似文献
18.
19.
Three main types of rodent filth (rodent excreta pellets, gnawing, and nesting material) are described and identification procedures are listed. Suspect excreta pellets that may be encountered in foods from various animals are described in detail and presented in a dichotomous key for comparison and identification. The physical features associated with the excreta pellets (color, shape, size, weight, surface, and matrix composition) are listed for the insects and animals found in the key. Rodent gnawing and rodent nesting materials are defined and the importance of the paired incisor marks, scalloping along edges and the appearance of the building materials are described. The importance of urine, rodent excreta, hairs and/or parasites when defining nesting material, are discussed, along with the key elements used to recognize the gnawing direction by the rodents. Historical data on rodents and health/safety concerns when handling rodent filth exhibits are addressed. 相似文献
20.
制浆造纸废水生化处理工程应用 总被引:1,自引:0,他引:1
对几种制浆造纸废水采用的生化工艺进行了分阶段说明,指出设计中常用的参数以及实际运行中的注意事项。对好氧生化工艺中关键的曝气设备进行了比较和分析。 相似文献