分子筛床对氚化水气体过滤效能的研究

为了准确掌握分子筛床在现场的实际防护效果,需要进行含氚(氚化水,HTO)空气穿透实验。将露点一定、氚浓度一定的普通氮气以稳定的流速通过分子筛床,并连续测量气体通过分子筛床前后氚浓度的变化和分子筛床穿透前后的质量变化,从而确定分子筛床在现场实际环境中的防氚效果。实验结果表明,无水分子筛床的氚化水吸附效果最好,4 h之内的过滤效率保持在95%以上,过滤效率高,使用时间长;1/3吸水的分子筛床的吸附效果较好,3 h之内过滤效率保持在90%以上。综合考虑使用舒适度和过滤效能,1/3吸水的分子筛床更适合用于现场的实际氚防护。     

CuO床氚气氧化效率测定

氚工艺中可用CuO床将氚气（HT）氧化成氚水（HTO），本实验测定了不同氧化床温度和载气流速条件下的氧化效率，以确定合适的氧化床操作工艺。     

加速器含氚废气净化系统的技术指标估算

根据加速器应用环境的要求,对建立纳秒脉冲/直流强中子发生器的含氚废气净化处理系统的主要参数、性能和技术指标进行了较为详细的分析和估算。含氚废气排放量大于4 m3/d,最大含氚浓度约1×1012Bq/m3,净化系统的除氚因子应大于1×103。建议采用国内外广泛使用的催化氧化加分子筛吸附的净化技术;结构上采用进出口都有氚浓度在线监测的装置,全自动智能控制加手动控制的三级串联的净化系统。     

HTO-HT甄别式氚快速取样系统研制

在氚工艺研究、氚生产等涉氚场所,如何快速准确收集操作间和烟囱流出物中的氚对工作人员辐射防护和氚排放量的控制非常重要。针对涉氚场所氚以氚气(HT)和氚水(HTO)两种形态存在的特点,基于半导体冷阱研制了一套HTO-HT甄别式氚快速取样系统。该取样系统设置了高热效率催化氧化炉和运行自控装置,采用低温冷阱冷凝收集经过催化氧化床氧化后的HT。系统取样流量为0~10L/min时,催化效率99%,取样效率95%,能够满足涉氚场所对HTO和HT甄别式快速取样的要求。     

用于含氚废气的无机载体疏水催化剂研制

为处理含氚废气筛选无机疏水载体,通过酸萃、高温灼烧对载体改性,经附铂、焙烧、还原后制备无机载体型Pt、Pd催化剂,常温下氢(氚)气的催化氧化实验中,几种催化剂表现相似的催化性能,氚气的单程转化率均大于90%,均可用于含氚废气处理。XRD测试结果显示,载体改性提高了载体的结晶度,有利于增加载体疏水性,降低附在载体上的铂晶粒尺寸,提高铂的分散度,但附铂后灼烧再还原的方法降低了铂的分散度。ZrO2的加入降低了钯晶粒尺寸,提高了钯的分散度。     

退役核设施不锈钢中氚的分析

在自制的氚污染不锈钢的高温热解析制样系统中对氚污染不锈钢样品进行解析分析,并对影响不锈钢样品中氚回收率的解析温度、解析时间、催化氧化效率、冷凝收集效率等条件进行了优化研究。结果表明,当载气（空气）流速为60～80 L/h,解析温度和催化氧化温度为700 ℃,冷凝温度为-20 ℃,解析时间为2 h时,氚污染不锈钢样品高温制样系统的冷凝收集效率为99%,催化氧化效率为98.6%,不锈钢样品中氚的解析率＞95%。以上结果表明,该不锈钢高温热解析制样系统及其解析条件能够满足退役核设施不锈钢样品中氚的分析要求。     

含氚硅胶中氚回收率的测量

采用加热解吸结合催化氧化及吸附法对含氚硅胶中的氚回收率进行了精确量化.结果显示,含氚硅胶中的氚主要以化合态的形式存在,含氚硅胶中氚回收率随样品的加热解吸温度的升高而增加,在相同的解吸温度下,含氚硅胶中氚回收率随载气流速的增加而呈下降趋势,在解吸温度为500℃及载气流速为60 mL/min下仍有5%以下的氚滞留在硅胶中,...     

土壤中全氚的测定

设计了一套可用于测量土壤样品中全氚的高温解析系统,对影响氚回收率的催化剂氧化效率、冷阱回收率、解析系数等因素进行了研究。结果表明,550℃下解析3h,催化剂的氧化效率为98．6％,冷阱回收效率为99％,解析系数为97．8％。该系统能够满足土壤样品中全氚的测量要求。     

空气中总氚量监测方法的研究

本文介绍一种简单、高灵敏度的空气中总氚量的监测方法。空气先通过一个乙二醇鼓泡吸收器以除去HTO,再通过加热的催化剂,使HT气体氧化为HTO,然后被第二个乙二醇鼓泡吸收器捕集。捕集的氚用液闪法测量。研究了取样流速、相对湿度、采样时间(吸收体积)以及氚的浓度对吸收效率和回收率的影响,并测定了在催化氧化剂上HT的转化效率。本法可用于氚实验室监测,含氚试验设备的氚泄漏率测量及环境监测等。     

空气除氚系统中氚氧化催化剂的研究进展

在大型氚设施中空气除氚系统必不可少,通过气-水转换除去气态氚是目前应用最广泛也是最有效的工艺,过程中氧化催化剂至关重要。总结了气态氚的催化氧化研究进展、催化剂的催化性能及影响催化性能的主要因素。贵金属Pt和Pd在室温下对氚的转化效率接近100%,因而被广泛用于氚的催化氧化。通过负载分散载体、添加催化助剂、使用规整结构催化剂、设计新型的催化反应器能够进一步提高催化剂性能。以蜂窝状催化剂为研究热点的规整结构催化剂以其高比表面积和低压力降而显示出良好的催化性能,将它用于氚的催化氧化,是该领域的一个研究方向。氢、氘、氚在氧化过程中的同位素效应会影响除氚效率,需进行深入研究。     

Identification of radiation treatment of wheat （Triticum aestivum. L）and rice （Oryza sativa. L） samples using thermoluminescence of contaminating minerals

Food irradiation is gaining popularity worldwide and this technology is important to improve quality and reduce the post harvest losses of food. Because of the rapid commercialization of irradiated foods throughout the world, compliance of different regulations relating to use of technology in different countries and demand of consumers for clear labelling of irradiated foods, there is need for the development of analytical methods to detect radiation treatment of food. Among several methods studied so far, thermoluminescence （TL） is an important method that can be used to find out the irradiation history of food that contain even a very minute amount of dust particles. In this study, the irradiated and unirradiated wheat and rice samples were analyzed using the TL method. The samples were purchased from the local market of Peshawar and irradiated to radiation doses of 0.5 and 1.0 kGy using Co-60 gamma irradiator at the Nuclear Institute for Food and Agriculture （NIFA）, Peshawar. The mineral contaminants were isolated by jet water, ultrasonic treatment, and density gradient. TL glow curves of the isolated minerals from irradiated and unirradiated samples were recorded between the temperature ranges of 50-500℃ using a TL reader. Generally, the glow curves for irradiated samples showed much higher TL intensities （TL1） than the unirradiated samples. The results were normalized by rerradiation of mineral samples to gamma-ray dose of 1.0 kGy followed by determination of the second glow curves （TL2）. The ratio of the area of first glow curve to that of second glow curve （TL1/TL2） was calculated for selected temperature intervals and compared with the recommended values for unirradiated and irradiated samples. Finally, the shapes of the glow curves for irradiated and unirradiated samples were also analyzed. On the basis of these results （comparison of TL-intensities, TL1/TL2 ratios and shapes of the glow curves）, all the irradiated and unirradiated samples of wheat and rice were unequivocally identified.     

The preclinical pharmacological study of dopamine transporter imaging agent 18F-FP-β-CIT

The paper is to study pharmacologic characteristics of 18F-FP-β-CIT (18F-N-(3-fluoropropyl)-2β- carbomethoxy-3β- (4-iodophenyl)nortropane) as an imaging agent for dopamine transporter. The radiochemical purity of 18F-FP-β-CIT in aqueous solution was over 95% after standing at room temperature for 4h. Biodistribution displayed rapid uptake in rat brain (1.375 %ID/organ at 5min and 0.100 %ID/organ at 180 min) and the striatal uptake was 1.444,0.731, 0.397, 0.230 and 0.146 %ID/g at 5, 30, 60, 120 and 180 min, respectively. The values of striatum/cerebellum,striatum/frontal cortex and striatum / hippocampus in rat's brain at 30 min were 3.38, 2.17 and 2.40 respectively. The uptake in striatum can be blocked by β-CFT, suggesting that 18F-FP-β-CIT binds to DAT peculiarly. The compound was rapidly cleared from monkey's blood. The striatal uptake was bilaterally decreased in the left-sided lesioned PD rats, compared with normal control. Brain PET imaging studies in normal monkey showed that 18F-FP-β-CIT was concentrated in striatum. The test of undue toxicity showed that the dose received by mice was 1250 times as by human, which indicates that 18F-FP-β-CIT is very safe. So 18F-FP-β-CIT is a promising PET imaging agent for DAT with safety and validity.     

PLASMA SCIENCE AND TECHNOLOGY AUTHOR INDEX TO VOLUME 16(2014)

正~~     

Radioactivity levels in soil of salt field area,Kelambakkam,Tamilnadu,India

Soil samples in and around salt field area have been analyzed for natural radioactivity concentration using gamma ray spectrometer.The activity concentration for ~(232)Th,~(238)U and ~(40)K are ranged from 27.88 to 45.27 Bq/kg, from BDL to 13.30 Bq/kg,and from 135.54 to 381.28 Bq/kg,respectively.The measured activity concentrations for these radionuclides were compared with world average activity of soil.The average activity concentration of ~(232)Th in the present study is 1.19 times higher than world median value while the activity of ~(238)U and ~(40)K is found to be lower. The absorbed dose rates due to these radionuclides were calculated.The average absorbed gamma dose rate due to the presence of ~(232)Th,~(238)U and ~(40)K in soil samples is 36.99 nGy·h~(-1).These results indicate no radiological anomaly. The data presented in this study will serve as a base line survey for primordial radionuclides concentration in the study area.     

Non-FDG PET imaging of brain tumors

Due to relatively high uptake of glucose in the brain cortex, the use of FDG PET imaging is greatly limited in brain tumor imaging, especially for low-grade gliomas and some metastatic tumours. More and more tracers with higher specificity were developed lately for brain tumor imaging. There are 3 main types of non-FDG PET tracers： amino acid tracers, choline tracers and nucleic acid tracers. These tracers are now widely applied in many aspects of brain tumor imaging. This article summarized the general use of non-FDG PET in different aspects of brain tumor imaging.     

基于NPL-NMC系统的γ测量子系统的建模与优化

在军控核查中,核部件的质量、丰度、年龄属性需采用无损方法进行核查,NPL-NMC系统是一套利用中子多重性测量核部件质量属性的装置,为建立完善的属性测量系统,还需在NPL-NMC系统的基础上建立γ测量子系统。本文通过设计γ测量子系统在NPL-NMC系统上的布局及对中子屏蔽的优化,使系统能对铀部件的丰度、年龄属性进行测量。模拟计算结果表明,该γ测量子系统能很好地满足军控核查对铀部件丰度、年龄属性测量的要求。     

Improvement of carbon fiber surface properties using electron beam irradiation

Carbon fiber-reinforced advance composites have been used for structural applications,mainly on account of their mechanical properties.The main factor for a good mechanical performance of carbon fiber-reinforced com- posite is the interfacial interaction between its components,which are carbon fiber and polymeric matrix.The aim of this study is to improve the surface properties of the carbon fiber using ionizing radiation from an electron beam to obtain better adhesion properties in the resultant composite.EB radiation was applied on the carbon fiber itself before preparing test specimens for the mechanical tests.Experimental results showed that EB irradiation improved the ten- sile strength of carbon fiber samples.The maximum value in tensile strength was reached using doses of about 250 kGy.After breakage,the morphology aspect of the tensile specimens prepared with irradiated and non-irradiated car- bon fibers were evaluated.SEM micrographs showed modifications on the carbon fiber surface.     

Measurement system for SSRF pulsed magnets

This paper describes the magnetic field measurement system for pulsed magnets in SSRF.The system consists of magnetic probes,analog active integrator,oscilloscope,stepper motor and a controller.An application pro- gram based on LabVIEW has been developed as main control unit.After the magnetic field mapping of a septum magnet prototype,it is verified that the test results accord with the results of theoretical calculation and computer simulation.     

旁路阀调节对高温气冷堆闭式布雷顿循环瞬态特性影响研究

闭式布雷顿循环是第4代高温堆核能系统的关键技术之一,其典型的动态过程是旁路阀调节。为分析这一过程,建立了循环中关键部件的动态模型,其中压气机在径向平衡模型基础上耦合了对附面层发展的预测,兼顾了计算效率与准确性;换热部件模型基于双曲型守恒律方程,对工质的热物性和参数的快速变化有较好的适应性。在此基础上根据回路的质量守恒和压力平衡原则将各部件的模型耦合,建立了系统的动态模型。由于旁路阀调节是氦气透平发电系统主要的功率快速调节手段,瞬态效应较为显著,以模块式高温气冷堆（HTR-10GT）旁路阀开启后的过渡过程作为算例,分析了主要循环参数的响应特性,并通过分析,给出了降低输出功率的机制。计算结果表明：系统的容积惯性对旁路阀调节的响应速度影响较大,而阀门的开度则决定了系统在末态的输出功率;回热器的温度冲击现象可能发生在调节过程中,但可通过两旁路阀联动的方式缓解;反应堆出口温度变化幅度很小,因此反应堆模型的准确程度对结果基本无影响。     

CEFR 100%额定功率运行汽轮机发电能力分析

中国实验快堆(CEFR)首次100%额定功率发电运行中,实际电功率较设计值相差较多。为判断影响机组实际发电能力的主要原因,以现场采集的运行数据和汽轮机厂商提供的设计资料为基础,进行了相应的计算分析。对汽轮机内效率进行修正,绘制汽轮机近似热力过程曲线,并通过实测的各段抽汽压力,在热力过程曲线上获得抽汽焓值;利用换热器的能量守恒和流量守恒的基本方程进行除氧器和各加热器的热平衡计算,获得各段抽汽的流量;利用汽轮机的功率计算方程,得到汽轮机发电功率的计算值。通过计算值与实际值的比较分析,得出主蒸汽参数不达标是影响CEFR汽轮机发电能力的主要因素。