SMSBR处理焦化废水的膜污染机理研究

在采用SMSBR处理焦化废水的过程中，通过对污泥进行终端过滤来反映膜污染机理，着重考察了过滤过程中的阻力分布，并通过标准堵塞过滤定律和沉积过滤定律来拟合膜过滤过程，从而确定了膜污染的控制因素。污泥的阻力分布试验表明，沉积阻力占总阻力的90％以上，并随压力的升高而增大，而内部污染阻力所占比例最小；污泥的终端过滤过程严格符合沉积过滤定律，即使在过滤初期也不受堵塞过滤的控制，这与阻力分布的结果相对应；污泥在严格符合沉积过滤定律，即使在过滤初期也不受堵塞过滤的控制，这与阻力布的结果相对应；污泥在终端过滤过程中膜的相对通量随过滤时间呈指数衰减趋势，并在几分钟内就达到相对稳定值，且低压对应较高的相对通量，但通量衰减指数和压力之间没有相关性；污泥的压密指数为0．7015。     

Optimization of sewage sludge conditioning and pressure dewatering by statistical modelling

By using a quadratic model, an assessment was made of the relative importance of different sludge and polyelectrolyte variables with respect to sludge pressure dewatering. It was seen that the polyelectrolyte characteristics and dose dominated the cake dry matter content and that sludge properties were less important, especially the electrophoretic mobility of the sludge, which showed a restricted natural variability over the 10-month sampling period. The developed quadratic model in this study appeared very well suited to quantitatively predict the pressure dewatering properties of sludge, allowing the selection of the dose and polyelectrolyte type that yield the best dewatering result. It was further shown that relatively small deviations from the optimal polyelectrolyte dose caused only small changes in cake dry matter values. The model appeared to be applicable on a long-term basis, as it was able to predict the dewaterability of several sludge samples from the studied wastewater treatment plant after more than 3 years. Finally, the model also allowed an (simplified) economic evaluation, indicating that for high cake disposal costs, the polyelectrolyte should be taken that guarantees the best dewatering results, even if it has to be applied in high doses.     

SMSBR中PAC对膜污染的防治作用

在SMSBR处理焦化废水的过程中，通过向反应器中投加粉末活性炭（PAC）进而形成生物活性炭（BAC）来实现对膜污染的防治，并通过对BAC污泥的终端过滤来反映其对膜污染的改善作用。试验结果表明，BAC污泥在终端过滤过程中，其相对通量的变化规律与普通活性污泥相同，但投加PAC后的膜通量明显提高。另外，在相同压力下普通活性污泥的通量衰减指数要远高于BAC污泥，而在相同PAC浓度下BAC污泥的通量衰减指数随压力的变化与普通活性污泥一样，未表现出一定的规律性。BAC污泥的阻力分布表明，沉积层阻力仍占有绝对优势（大于80％），并随压力的升高而增大，但与普通活性污泥相比该比例有明显下降，膜的固有阻力所占比例明显提高，体现了PAC对膜污染的防治作用。     

Use of multidimensional scaling in the selection of wastewater toxicity test battery components

In aquatic toxicity testing, no single test species is sensitive to all toxicants. Therefore, test batteries consisting of several individual assays are becoming more common. The organisms in a test battery should be representative of the entire system of interest. The results of the assays should be complementary to other components in the test battery to avoid redundancy. With the aid of multidimensional scaling (MDS), a multivariate statistical method, we examined the toxicity data of five bioassays (the continuous Shk1, Polytox, activated sludge respiration inhibition, Nitrosomonas, and Tetrahymena assays) that could serve as test battery components for the assessment of wastewater toxicity to activated sludge. MDS mapped the five assays into a two-dimensional space and showed that the Nitrosomonas assay should be included in test batteries plus one of the remaining four assays for assessing wastewater toxicity to activated sludge.     

Novel cake characteristics of waste-activated sludge

Breaking down the time limit constraints for conventional compression-permeation (C-P) cell test, this work has, for the first time, experimentally evaluated the cake characteristics of viable waste-activated sludge subject to polyelectrolyte flocculation and to freeze/thaw treatment under a pressure range of 25-200 kPa. There exists a threshold pressure exceeding which the cake structure would significantly deteriorate. Also, the present biological sludge is a "super-compactible" sludge, whose compactibility is greater than most data ever reported in open literature. The information presented herein has implications to filter design/operation and can be used as a reference data set for examining the existing filtration theories.     

Co-conditioning and dewatering of chemical sludge and waste activated sludge

The conditioning and dewatering behaviors of chemical and waste activated sludges from a tannery were studied. Capillary suction time (CST), specific resistance to filtration (SRF), and bound water content were used to evaluate the sludge dewatering behaviors. Zeta potentials were also measured. Experiments were conducted on each sludge conditioned and dewatered separately, and on the sludge mixed at various ratios. Results indicate that the chemical sludge was relatively difficult to be dewatered, even in the presence of polyelectrolyte. When the waste activated sludge was mixed with the chemical sludge at ratios of 1:1 and 2:1, respectively, the dewaterability of chemical sludge improved remarkably while the relatively better dewaterability of the waste activated sludge deteriorated only to a limited extent. As the mixing ratios became 4:1 and 8:1, the dewaterability of the mixed sludge was equal to that of the waste activated sludge. The optimal polyelectrolyte dosage for the mixed sludge was equal to or less than that of the waste activated sludge. It is proposed that the chemical sludges act as skeleton builders that reduce the compressibility of the mixed sludge whose dewaterability is enhanced. Bound water contents of sludge decreased at low polyelectrolyte dosage and were not significantly affected as polyelectrolyte dosage increased. Advantages and disadvantages of co-conditioning and dewatering chemical sludge and waste activated sludge were discussed.     

Enhanced sludge dewatering by dual polyelectrolytes conditioning

Sludge dewatering by dual polyelectrolytes conditioning was investigated in this study. Single polyelectrolyte is utilized in sludge conditioning conventionally, in which charge neutralization and bridging are involved in the reactions. In the current study, both cationic and non-ionic polyelectrolytes were utilized simultaneously in the conditioning. Waste activated sludge was sampled from a synthetic fiber plant, and used in the experiment. Capillary suction time (CST), specific resistance to filtration (SRF), and settling rate were used to evaluate the sludge dewatering behaviors. Zeta potentials were also measured. Sludge dewatering behaviors resulting from single and dual polyelectrolytes conditioning were compared. It was found that sludge conditioned with dual polyelectrolytes performed better in fine particle capture and in the formation of larger flocs that resulted in a better dewaterability and less chance of overdosing. The dosing sequence in dual polyelectrolytes also affected the sludge dewaterability. Reaction mechanisms in dual polyelectrolyte conditioning were proposed based on enhanced flocculation of sludge particles.     

Application of microwaves for sewage sludge conditioning

The article focuses on the effect of microwave treatment on the de-waterability of sewage sludge. The specific resistance to filtration, capillary suction time, and dry matter content in centrifuged sludge cake were measured. The quality of sludge liquor obtained after microwave processing was also analysed. It was found out that microwaves improve sludge de-waterability. The quantitative improvement depends on sludge type-better effect of microwave processing were observed in the primary sludge compared to mixed or digested sludges. If microwave treatment is followed by polyelectrolyte conditioning, the effects are considerably better than while these conditioning methods are used separately. Microwave conditioning increased burden of organic matter (BOD(5), COD) in the sludge liquor.     

Novel insights into sludge dewaterability by fluorescence excitation-emission matrix combined with parallel factor analysis

Sludge dewatering is of major interest in sludge volume reduction and handling properties improvement. Here we report an approach of fluorescence excitation-emission matrix (EEM) combined with parallel factor (PARAFAC) analysis to elucidate the factors that influence sludge dewaterability. Sludge flocs from 11 full-scale wastewater treatment plants were collected to stratify into different extracellular polymeric substances (EPS) fractions and then to characterize their fluorescence EEMs. Both the normalized capillary suction time (CST) and specific resistance to filtration (SRF) were applied to determine sludge dewaterability. The results showed that fluorescence EEMs of tightly bound fractions were not affected by the wastewater sources. In contrast, fluorescence EEMs of loosely bound fractions were affected by the wastewater sources. All the fluorescence EEMs could be successfully decomposed into a six-component model by PARAFAC analysis. Both normalized CST and SRF were significantly correlated with component 1 [excitation/emission (Ex/Em) = (220, 275)/350] in the supernatant fraction, with components 5 [Ex/Em = (230, 280)/430] and 6 [Ex/Em = (250, 360)/460] in the slime and LB-EPS fraction. These results reveal that except for proteins-like substances (component 1), sludge dewaterability is also affected by humic acid-like and fulvic acid-like substances (components 5 and 6) in the slime and LB-EPS fractions. Furthermore, this paper presents a promising and facile approach (i.e., EEM-PARAFAC) for investigating sludge dewaterability.     

Novel membrane bioreactor (MBR) coupled with a nonwoven fabric filter for household wastewater treatment

Conventional and modified membrane bioreactors (MBRs) are increasingly used in small-scale wastewater treatment. However, their widespread applications are hindered by their relatively high cost and operational complexity. In this study, we investigate a new concept of wastewater treatment using a nonwoven fabric filter bag (NFFB) as the membrane bioreactor. Activated sludge is charged in the nonwoven fabric filter bag and membrane filtration via the fabric is achieved under gravity flow without a suction pump. This study found that the biofilm layer formed inside the NFFB achieved 10 mg/L of suspended solids in the permeate within 20 min of initial operation. The dynamic biofilter layer showed good filterability and the specific membrane resistance consisted of 0.3-1.9 × 10¹² m/kg. Due to the low F/M ratio (0.04-0.10 kg BOD₅/m³/d) and the resultant low sludge yield, the reactor was operated without forming excess sludge. Although the reactor provided aerobic conditions, denitrification occurred in the biofilm layer to recover the alkalinity, thereby eliminating the need to supplement the alkalinity. This study indicates that the NFFB system provides a high potential of effective wastewater treatment with simple operation at reduced cost, and hence offer an attractive solution for widespread use in rural and sparsely populated areas.