Receptor modeling of PM2.5, PM10 and TSP in different seasons and long-range transport analysis at a coastal site of Tianjin, China

Atmospheric particulate matter (PM_2.5, PM₁₀ and TSP) were sampled synchronously during three monitoring campaigns from June 2007 to February 2008 at a coastal site in TEDA of Tianjin, China. Chemical compositions including 19 elements, 6 water-solubility ions, organic and elemental carbon were determined. principle components analysis (PCA) and chemical mass balance modeling (CMB) were applied to determine the PM sources and their contributions with the assistance of NSS SO₄²⁻, the mass ratios of NO₃⁻ to SO₄²⁻ and OC to EC. Air mass backward trajectory model was compared with source apportionment results to evaluate the origin of PM. Results showed that NSS SO₄²⁻ values for PM_2.5 were 2147.38, 1701.26 and 239.80 ng/m³ in summer, autumn and winter, reflecting the influence of sources from local emissions. Most of it was below zero in summer for PM₁₀ indicating the influence of sea salt. The ratios of NO₃⁻ to SO₄²⁻ was 0.19 for PM_2.5, 0.18 for PM₁₀ and 0.19 for TSP in winter indicating high amounts of coal consumed for heating purpose. Higher OC/EC values (mostly larger than 2.5) demonstrated that secondary organic aerosol was abundant at this site. The major sources were construction activities, road dust, vehicle emissions, marine aerosol, metal manufacturing, secondary sulfate aerosols, soil dust, biomass burning, some pharmaceutics industries and fuel-oil combustion according to PCA. Coal combustion, marine aerosol, vehicular emission and soil dust explained 5-31%, 1-13%, 13-44% and 3-46% for PM_2.5, PM₁₀ and TSP, respectively. Backward trajectory analysis showed air parcels originating from sea accounted for 39% in summer, while in autumn and winter the air parcels were mainly related to continental origin.     

Mixing of dust with pollution on the transport path of Asian dust--revealed from the aerosol over Yulin, the north edge of Loess Plateau

Both PM_2.5 and TSP were monitored in the spring from 2006 to 2008 in an intensive ground monitoring network of five sites (Tazhong, Yulin, Duolun, Beijing, and Shanghai) along the pathway of Asian dust storm across China to investigate the mixing of dust with pollution on the pathway of the long-range transport of Asian dust. Mineral was found to be the most loading component of aerosols both in dust event days and non-dust days. The concentrations of those pollution elements, As, Cd, Pb, Zn, and S in aerosol were much higher than their mean abundances in the crust even in dust event days. The high concentration of SO₄²⁻ could be from both sources: one from the transformation of the local emitted SO₂ and the other from the sulfate that existed in primary dust, which was transported to Yulin. Na⁺, Ca²⁺, and Mg²⁺ were mainly from the crustal source, while NO₃⁻ and NH₄⁺ were from the local pollution sources. The mixing of dust with pollution aerosol over Yulin in dust event day was found to be ubiquitous, and the mixing extent could be expressed by the ratio of NO₃⁻/Al in dust aerosol. The ratio of Ca/Al was used as a tracer to study the dust source. The comparison of the ratios of Ca/Al together with back trajectory analysis indicated that the sources of the dust aerosol that invaded Yulin could be from the northwestern desert in China and Mongolia Gobi.     

Temporal variation of nitro-polycyclic aromatic hydrocarbons in PM10 and PM2.5 collected in Northern Mexico City

With the aim to determine the presence of individual nitro-PAH contained in particles in the atmosphere of Mexico City, a monitoring campaign for particulate matter (PM₁₀ and PM_2.5) was carried out in Northern Mexico City, from April 2006 to February 2007. The PM₁₀ annual median concentration was 65.2 μg m^− 3 associated to 7.6 μg m^− 3 of solvent-extractable organic matter (SEOM) corresponding to 11.4% of the PM₁₀ concentration and 38.6 μg m^− 3 with 5.9 μg m^− 3 SEOM corresponding to 15.2% for PM_2.5. PM concentration and SEOM varied with the season and the particle size. The quantification of nitro-polycyclic aromatic hydrocarbons (nitro-PAH) was developed through the standards addition method under two schemes: reference standard with and without matrix, the former giving the best results. The recovery percentages varied with the extraction method within the 52 to 97% range depending on each nitro-PAH. The determination of the latter was effected with and without sample purification, also termed fractioning, giving similar results. 8 nitro-PAH were quantified, and their sum ranged from 111 to 819 pg m^− 3 for PM₁₀ and from 58 to 383 pg m^− 3 for PM_2.5, depending on the season. The greatest concentration was for 9-Nitroanthracene in PM₁₀ and PM_2.5, detected during the cold-dry season, with a median (10th-90th percentiles) concentration in 235 pg m^− 3 (66-449 pg m^− 3) for PM₁₀ and 73 pg m^− 3 (18-117 pg m^− 3) for PM_2.5. The correlation among mass concentrations of the nitro-PAH and criteria pollutants was statistically significant for some nitro-PAH with PM₁₀, SEOM in PM₁₀, SEOM in PM_2.5, NO_X, NO₂ and CO, suggesting either sources, primary or secondary origin. The measured concentrations of nitro-PAH were higher than those reported in other countries, but lower than those from Chinese cities. Knowledge of nitro-PAH atmospheric concentrations can aid during the surveillance of diseases (cardiovascular and cancer risk) associated with these exposures.     

Modeling residential indoor concentrations of PM2.5, NO2, NOx,and secondhand smoke in the Subpopulations and Intermediate Outcome Measures in COPD (SPIROMICS) Air study

Increased outdoor concentrations of fine particulate matter (PM_2.5) and oxides of nitrogen (NO₂, NO_x) are associated with respiratory and cardiovascular morbidity in adults and children. However, people spend most of their time indoors and this is particularly true for individuals with chronic obstructive pulmonary disease (COPD). Both outdoor and indoor air pollution may accelerate lung function loss in individuals with COPD, but it is not feasible to measure indoor pollutant concentrations in all participants in large cohort studies. We aimed to understand indoor exposures in a cohort of adults (SPIROMICS Air, the SubPopulations and Intermediate Outcome Measures in COPD Study of Air pollution). We developed models for the entire cohort based on monitoring in a subset of homes, to predict mean 2-week–measured concentrations of PM_2.5, NO₂, NO_x, and nicotine, using home and behavioral questionnaire responses available in the full cohort. Models incorporating socioeconomic, meteorological, behavioral, and residential information together explained about 60% of the variation in indoor concentration of each pollutant. Cross-validated R² for best indoor prediction models ranged from 0.43 (NO_x) to 0.51 (NO₂). Models based on questionnaire responses and estimated outdoor concentrations successfully explained most variation in indoor PM_2.5, NO₂, NO_x, and nicotine concentrations.     

Visibility, air quality and daily mortality in Shanghai, China

This study was designed to assess the association between visibility and air quality, and to determine whether the variations in daily mortality were associated with fluctuations in visibility levels in Shanghai, China. Mortality data were extracted from the death certificates, provided by Shanghai Municipal Center of Disease Control and Prevention, and visibility data were obtained from Shanghai Municipal Bureau of Meteorology. Air quality data (PM₁₀, PM_2.5, PM_10-2.5, SO₂, NO₂ and O₃) were obtained from Shanghai Environmental Monitoring Center. Generalized additive model (GAM) with penalized splines was used to analyze the mortality, visibility, air pollution, and covariate data. Among various pollutants, PM_2.5 showed strongest correlation with visibility. Visibility, together with humidity, was found appropriate in predicting PM_2.5 (R-squared: 0.64) and PM₁₀ (R-squared: 0.62). Decreased visibility was significantly associated with elevated death rates from all causes and from cardiovascular disease in Shanghai; one inter-quartile range (8 km) decrease in visibility corresponded to 2.17% (95%CI: 0.46%, 3.85%), 3.36% (95%CI: 0.96%, 5.70%), and 3.02% (95%CI: − 1.32%, 7.17%) increase of total, cardiovascular and respiratory mortality, respectively. The effect estimates using predicted PM_2.5 and PM₁₀ concentrations were similar to those assessed using actual concentrations. This is the first study in Mainland China assessing the association between visibility and adverse health outcomes. Our findings suggest the possibility of using visibility as a surrogate of air quality in health research in developing countries where air pollution data might be scarce and not routinely monitored.     

Factors affecting variability in gaseous and particle microenvironmental air pollutant concentrations in Hong Kong primary and secondary schools

School-age children are particularly susceptible to exposure to air pollutants. To quantify factors affecting children's exposure at school, indoor and outdoor microenvironmental air pollutant concentrations were measured at 32 selected primary and secondary schools in Hong Kong. Real-time PM₁₀, PM_2.5, NO_2, and O₃ concentrations were measured in 76 classrooms and 23 non-classrooms. Potential explanatory factors related to building characteristics, ventilation practice, and occupant activities were measured or recorded. Their relationship with indoor measured concentrations was examined using mixed linear regression models. Ten factors were significantly associated with indoor microenvironmental concentrations, together accounting for 74%, 61%, 46%, and 38% of variations observed for PM_2.5, PM₁₀, O_3, and NO₂ microenvironmental concentrations, respectively. Outdoor concentration is the single largest predictor for indoor concentrations. Infiltrated outdoor air pollution contributes to 90%, 70%, 75%, and 50% of PM_2.5, PM₁₀, O_3, and NO₂ microenvironmental concentrations, respectively, in classrooms during school hours. Interventions to reduce indoor microenvironmental concentrations can be prioritized in reducing ambient air pollution and infiltration of outdoor pollution. Infiltration factors derived from linear regression models provide useful information on outdoor infiltration and help address the gap in generalizable parameter values that can be used to predict school microenvironmental concentrations.     

Association of ambient air pollution with hospital outpatient and emergency room visits in Shanghai, China

Few studies exist in China examining the association of ambient air pollution with morbidity outcomes. We conducted a time-series analysis to examine the association of outdoor air pollutants (PM₁₀, SO₂, and NO₂) with hospital outpatient and emergency room visits in Shanghai, China, using 3 years of daily data (2005-2007). Hospital and air pollution data were collected from the Shanghai Health Insurance Bureau and Shanghai Environmental Monitoring Center. Using a natural spline model, we examined effect of air pollutants with different lag structures including both single-day lag and multi-day lag. We examined effects of air pollution for the warm season (from April to September) and cool season (from October to March) separately. We found outdoor air pollution (SO₂ and NO₂) was associated with increased risk of hospital outpatient and emergency room visits in Shanghai. The effect estimates varied for different lag structures of pollutants’ concentrations. For lag 3, a 10 μg/m³ increase in concentration of PM₁₀, SO₂ and NO₂ corresponded to 0.11% (95%CI: −0.03%, 0.26%), 0.34% (95%CI: 0.06%, 0.61%) and 0.55% (95%CI: 0.14%, 0.97%) increase of outpatient visit; and 0.01% (95%CI: −0.09%, 0.10%), 0.17% (95%CI: 0.00%, 0.35%) and 0.08% (95%CI: −0.18%, 0.33%) increase of emergency room visit. The associations appeared to be more evident in the cool season than in the warm season. In conclusion, short-term exposure to outdoor air pollution was associated with increased risk of hospital outpatient and emergency room visits in Shanghai. Our analyses provide evidence that the current air pollution level has an adverse health effect and strengthen the rationale for further limiting air pollution levels in the city.     

Indoor/outdoor relationship of fine particles less than 2.5 μm (PM2.5) in residential homes locations in central Indian region

The high levels in developing countries and the apparent scale of its impact on the global burden of disease underline the importance of particulate as an environmental health risk and the consequence need for monitoring them particularly in indoor microenvironment. PM2.5 μm, 1.0 μm, 0.5 μm and 0.25 μm were measured inside and outside 14 residential homes located in different microenvironment during a six-month period (October 2007–March 2008) in Agra located in the central region of India. Particulate mass concentrations were measured using Grimm aerosol spectrometer for 24 h inside and outside the homes located in roadside, rural and urban area, along with the field survey study done in the same region. The indoor average concentrations recorded for PM_2.5, PM_1.0, PM_0.5 and PM_0.25 were maximum for the rural homes (173.03 μgm⁻³, 133.26 μgm⁻³, 96.02 μgm⁻³, 8.56 μgm⁻³) followed by roadside homes (137.93 μgm⁻³, 117.09 μgm⁻³, 68.17 μgm⁻³, 8.55 μgm⁻³) and then by urban homes (135.55 μgm⁻³, 102.92 μgm⁻³, 38.38 μgm⁻³, 6.35 μgm⁻³). The average I/O ratios for PM_2.5, PM_1.0, PM_0.5 and PM_0.25 in roadside and rural areas were close to or above 1.00 and less than 1.00 for urban areas. The I/O ratios obtained were linked to the indoor activities using occupant's diary entries. The positive values of correlation coefficient (r) also indicated the indoor concentrations of particulate matter were correlated with the corresponding outdoor concentrations.     

Investigating the potential role of ammonia in ion chemistry of fine particulate matter formation for an urban environment

To investigate the potential role of ammonia in ion chemistry of PM_2.5 aerosol, measurements of PM_2.5 (particulate matter having aerodynamic diameter < 2.5 µm) along with its ionic speciation and gaseous pollutants (sulfur dioxide (SO₂), nitrogen oxides (NO_x), ammonia (NH₃) and nitric acid (HNO₃)) were undertaken in two seasons (summer and winter) of 2007-2008 at four sampling sites in Kanpur, an urban-industrial city in the Ganga basin, India. Mean concentrations of water-soluble ions were observed in the following order (i) summer: SO₄²⁻ (26.3 µg m^− 3) > NO₃⁻ (16.8) > NH₄⁺ (15.1) > Ca²⁺ (4.1) > Na⁺ (2.4) > K⁺ (2.1 µg m^− 3) and (ii) winter: SO₄²⁻ (28.9 µg m^− 3) > NO₃⁻ (23.0) > NH₄⁺ (16.4) > Ca²⁺(3.4) > K⁺(3.3) > Na⁺ (3.2 µg m^− 3). The mean molar ratio of NH₄⁺ to SO₄²⁻ was 2.8 ± 0.6 (mostly >2), indicated abundance of NH₃ to neutralize H₂SO₄. The excess of NH₄⁺ was inferred to be associated with NO₃⁻ and Cl⁻. Higher sulfur conversion ratio (F_s: 58%) than nitrogen conversion ratio (F_n: 39%) indicated that SO₄²⁻ was the preferred secondary species to NO₃⁻. The charge balance for the ion chemistry of PM_2.5 revealed that compounds formed from ammonia as precursor are (NH₄)₂SO₄, NH₄NO₃ and NH₄Cl. This study conclusively established that while there are higher contributions of NH₄⁺, SO₄²⁻ to PM_2.5 in summer but for nitrates (in particulate phase), it is the winter season, which is critical because of low temperatures that drives the reaction between ammonia and HNO₃ in forward direction for enhanced nitrate formation. In summary, inorganic secondary aerosol formation accounted for 30% mass of PM_2.5 and any particulate control strategy should include optimal control of primary precursor gases including ammonia.     

Origins of n-alkanes, carbonyl compounds and molecular biomarkers in atmospheric fine and coarse particles of Athens, Greece

The abundance and origin of aliphatic hydrocarbons, carbonyl compounds and molecular biomarkers found in the aliphatic fraction of PM_10-2.5 and PM_2.5 in the centre of Athens Greece are discussed in an attempt to reveal seasonal air pollution characteristics of the conurbation. Each extract was fractionated into individual compound classes and was analyzed using gas chromatography coupled to mass spectrometry. Normal alkanes, ranging from C₁₄ to C₃₅, were abundant in PM_10-2.5 and PM_2.5 samples during both sampling campaigns. The daily concentration of total n-alkanes was up to 438 ng m^− 3 for PM_10-2.5 and up to 511 ng m^− 3 for PM_2.5. Additionally, gaseous concentrations of n-alkanes were calculated, revealing that the relative proportions between gaseous and particle phases of individual compounds may differ significantly between summer and late winter. Normal alkanals and alkan-2-ones were only detected in the fine fraction of particulate matter and their concentrations were much lower than the n-alkane concentrations. Several geochemical parameters were used to qualitatively reconcile the sources of organic aerosol. The carbon preference index (CPI) of the coarse particles in August had the highest value, while in March the leaf wax contribution decreased significantly and the CPI value was very close to unity for both sites. Maximum concentrations of carbonyl compounds were reported in the range of C₁₅-C₂₀, demonstrating that they were formed from anthropogenic activity or from atmospheric oxidative processes. 6, 10, 14-trimethylpentadecan-2-one, a marker of biogenic input, was also detected in our samples. Molecular biomarker compounds confirmed that ca. 60% of the aliphatic fraction on the sampled atmospheric particles originated from petroleum and not from any contemporary biogenic sources. Pristane and phytane were detected in the fine fraction with their presence indicating sources of fossil fuel in the range of C₁₆-C₂₀. At all sites the 17α(Η),21β(Η) hopane series was the most abundant hopane group.     

Aerosol background at two remote CAWNET sites in western China

The frequency distributions and some statistical features of background aerosol concentrations were investigated at two remote China Atmosphere Watch Network (CAWNET) stations. The estimated elemental carbon (EC) background at Akdala (AKD) in the mid-latitudes of northwestern China (~ 0.15 μg m^− 3) was only half of that at Zhuzhang (ZUZ) in low-latitude southwestern China (~ 0.30 μg m^− 3). The contributions of EC to the aerosol mass also differed between sites: EC contributed 3.5% of the PM₁₀ mass at AKD versus 5.1% at ZUZ. Large percentages of the total organic carbon (OC) apparently were secondary organic carbon (SOC); SOC/OC averaged 81% at ZUZ and 68% at AKD. The OC/EC ratios in PM₁₀ (ZUZ: 11.9, AKD: 12.2) were comparable with other global background sites, and the OC/EC ratios were used to distinguish polluted periods from background conditions. The SO₄²⁻, NH₄⁺ and soil dust loadings at AKD were higher and more variable than at ZUZ, probably due to impacts of pollution from Russia and soil dust from the Gobi and adjacent deserts. In contrast to ZUZ, where the influences from pollution were weaker, the real-time PM₁₀ mass concentrations at AKD were strongly skew right and the arithmetic mean concentrations of the aerosol populations were higher than their medians. Differences in the aerosol backgrounds between the sites need to be considered when evaluating the aerosol's regional climate effects.     

Toxic metals in the atmosphere in Lahore, Pakistan

Aerosol mass (PM₁₀ and PM_2.5) and detailed elemental composition were measured in monthly composites during the calendar year of 2007 at a site in Lahore, Pakistan. Elemental analysis revealed extremely high concentrations of Pb (4.4 μg m^− 3), Zn (12 μg m^− 3), Cd (0.077 μg m^− 3), and several other toxic metals. A significant fraction of the concentration of Pb (84%), Zn (98%), and Cd (90%) was contained in the fine particulate fraction (PM_2.5 and smaller); in addition, Zn and Cd were largely (≥ 60%) water soluble. The 2007 annual average PM₁₀ mass concentration was 340 μg m^− 3, which is well above the WHO guideline of 20 μg m^− 3. Dust sources were found to contribute on average (maximum) 41% (70%) of PM₁₀ mass and 14% (29%) of PM_2.5 mass on a monthly basis. Seasonally, concentrations were found to be lowest during the monsoon season (July-September). Principle component analysis identified seven factors, which combined explained 91% of the variance of the measured components of PM₁₀. These factors included three industrial sources, re-suspended soil, mobile sources, and two regional secondary aerosol sources likely from coal and/or biomass burning. The majority of the Pb was found to be associated with one industrial source, along with a number of other toxic metals including As and Cr. Cadmium, another toxic metal, was found at concentrations 16 times higher than the maximum exposure level recommended by the World Health Organization, and was concentrated in one industrial source that was also associated with Zn. These results highlight the importance of focusing control strategies not only on reducing PM mass concentration, but also on the reduction of toxic components of the PM as well, to most effectively protect human health and the environment.     

Ambient air pollution and daily mortality in Anshan, China: a time-stratified case-crossover analysis

Few case-crossover studies were conducted in China to investigate the acute health effects of air pollution. We conducted a time-stratified case-crossover analysis to examine the association between air pollution and daily mortality in Anshan, a heavily-polluted industrial city in northeastern China. Daily mortality, air pollution, and weather data in 2004-2006 in Anshan were collected. Time-stratified case-crossover approach was used to estimate the effect of air pollutants (PM₁₀, SO₂, NO₂ and CO) on total and cardiopulmonary mortality. Controls were selected as matched days of the week in the same month. Potential effect modifiers, such as gender and age, were also examined. We found significant associations between air pollution and daily mortality from cardiovascular diseases in Anshan. A 10 μg/m³ elevation of 2-day moving average (lag 01) concentration in PM₁₀, SO₂, NO₂ and CO corresponded to 0.67% (95% CI: 0.29%, 1.04%), 0.38% (95% CI: −0.06%, 0.83%), 2.11% (95% CI: 0.22%, 4.00%) and 0.04% (95% CI: 0.01%, 0.07%) increase of cardiovascular mortality. The associations for total and respiratory mortality were generally positive but statistically insignificant. The air pollution health effects were significantly modified by age, but not by gender. Conclusively, our study showed that short-term exposure to air pollution was associated with increased cardiovascular mortality in Anshan. These findings may have implications for local environmental and social policies.     

Particulate matter and gaseous pollutants in residences in Antwerp, Belgium

This comprehensive study, a first in Flanders, Belgium, aimed at characterizing the residential indoor air quality of subgroups that took part in the European Community Respiratory Health Survey (ECRHS I—1991 and ECHRS II—1996) questionnaire-based asthma and related illnesses studies. This pilot study aimed at the evaluation of particulate matter and various inorganic gaseous compounds in residences in Antwerp. In addition personal exposure to the gaseous compounds of one individual per residence was assessed. The main objective was to obtain some base-line pollutant levels and compare these with studies performed in other cities, to estimate the indoor air quality in residences in Antwerp. Correlations between the various pollutant levels, indoor:outdoor ratios and the micro-environments of each residence were investigated. This paper presents results on indoor and ambient PM₁, PM_2.5 and PM₁₀ mass concentrations, its elemental composition in terms of K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Pb, Al, Si, S and Cl and the water-soluble ionic concentrations in terms of SO₄²⁻, NO₃²⁻, Cl⁻, NH₄⁺ K⁺, Ca²⁺. In addition, indoor, ambient and personal exposure levels of the gases NO₂, SO₂, and O₃ were determined. Elevated indoor:outdoor ratios were found for NO₂ in residences containing gas stoves. In smoker's houses increased PM concentrations of 58 and 43% were found for the fine and coarse fractions respectively. Contrary to the fact that all I/O ratios of the registered elements in each individual house were significantly correlated to each other, no correlation could be established between the I/O ratios of the different houses, thus indicating a unique micro-environment for each residence. Linear relationships between the particulate matter elemental composition, SO₂ and O₃ levels indoors and outdoors could be established. No linear relationships between indoor and outdoor NO₂ and particulate mass concentrations were found.     

Lessons learned from a woodstove changeout on the Nez Perce Reservation

A woodstove changeout program was conducted within 16 homes on the Nez Perce Reservation in Idaho to evaluate the effectiveness of a woodstove changeout in improving indoor air quality. PM_2.5 samples were collected within the common area (rooms where the stoves were located) of the homes both before and after the installation of cleaner burning EPA-certified stoves. During the pre- and post-changeout sampling, indoor PM_2.5 mass, Organic Carbon (OC), Elemental Carbon (EC), and chemical markers of woodsmoke (including levoglucosan) were measured.Sampling results from this study showed that indoor air quality was improved in 10 of the 16 homes following the woodstove changeout and educational training program. Five homes had increased indoor PM_2.5 concentrations following the changeout, while one home did not have final PM_2.5 results for comparison. The median pre-changeout PM_2.5 mass (as measured by TSI DustTraks) was 39.2 μg/m³, with a median post-changeout concentration of 19.0 μg/m³. This resulted in an overall 52% reduction in median indoor PM_2.5, a 36% reduction in mean indoor PM_2.5 and a 60% reduction in PM_2.5 spikes when the old stoves were replaced with EPA-certified stoves. Another significant finding of the project was that targeted education and outreach is a critical component of the overall success of the program. Effective messaging to homeowners on proper use of their new stove is a necessary task of a woodstove changeout.     

Organic compounds of PM2.5 in Mexico Valley: spatial and temporal patterns, behavior and sources

A longitudinal study on spatial and temporal behavior of particles less than 2.5 μm (PM_2.5), solvent extracted organic matter (SEOM), polycyclic aromatic hydrocarbons (PAH), n-alkanes and nitro-PAH was carried out for a full year in 2006, at five sites simultaneously around the Metropolitan Zone of Mexico Valley (MZMV). There is rather uniform distribution of PM_2.5 and SEOM in the MZMV regarding gravimetric mass concentration, while some specific organic chemical components showed mass heterogeneity. The highest mass concentrations of target compounds occurred in the dry seasons with respect to the rainy season. Bonfires and fireworks are probably responsible for extreme values of PM_2.5, SEOM and PAH (≥ 228 g mol^− 1). Benzo[ghi]perylene was the most abundant PAH, with C₂₄-C₂₆ the most abundant n-alkanes and 2-nitrofluoranthene and 9-nitroanthracene the most abundant nitro-PAH. The northeast zone was the area with the greatest presence of sources of incomplete diesel combustion, while the central for gasoline combustion. In the southwest, the biogenic sources were more abundant over the anthropogenic sources. This was opposite to the other sites. Factor analysis allowed us to relate different compounds to emitting sources. Three main factors were associated with combustion, pyrolysis and biogenic primary sources while the other factors were associated with secondary organic aerosol formation and industry. Correlation analyses indicated that SEOM originates from different primary emission sources or is formed by different processes than the other variables, except in southwest. Associations among variables suggest that PM_2.5 in the northwest and in the southeast originated mainly from primary emissions or consisted of primary organic compounds. PM_2.5 in the northeast, central and southwest contains a greater proportion of secondary organic compounds, with the less oxidized organic aerosols in the northeast and the most aged organic aerosol in the southwest. This follows the trends in the prevailing wind directions in MZMV during 2006.     

Studying the indoor air quality in three non-residential environments of different use: A museum,a printery industry and an office

The aim of the present study was to identify the main sources contributing to the air pollution of three indoor environments of different use: a museum, a printery industry and an office. For that purpose, particulate matter (TSP, PM₁₀, PM_2.5), inorganic pollutants (NO_x, SO₂, O₃) and organic compounds (BTX, formaldehyde) were monitored. Factors such as the kind of the activities occurred indoors, the emissions from the existing equipment, the number of occupants, the ventilation pattern and the outdoor background substantially varied among the three sites.     

Air pollution and meteorological processes in the growing dryland city of Urumqi (Xinjiang, China)

Seven years (2000-2006) of monthly PM₁₀ (particulate matter, d ≤ 10 μm), SO₂, and NO₂ concentrations are reported for Urumqi, the capital of Xinjiang in NW China. Considerably high mean annual concentrations have been observed, which ranged between 150 and 240 μg m^− 3 (PM₁₀), 31 and 50 μg m^− 3 (NO₂), and 49 and 160 μg m^− 3 (SO₂). The shapes of seasonal variation of all pollutants were remarkably similar; however, winter/summer ratios of concentrations were quite different for PM₁₀ (2-3) and NO₂ (≈ 4) compared to SO₂ (up to 30). Very high consumption rates of fossil fuels for energy generation and domestic heating are mainly responsible for high annual pollution levels, as well as the (very) high winter/summer ratios. Detailed analysis of the 2000-2006 records of Urumqi's meteorological data resulted in inter-annual and seasonal frequency distributions of (a) (surface) inversion events, (b) heights of surface inversions, (c) stability classes of Urumqi's boundary layer, and (d) the “Air Stagnation Index (ASI)”. Urumqi's boundary layer is shown to be characterized by high mean annual and seasonal frequencies of (surface) inversions and by the dominance of stable dispersion classes. A further outcome of the meteorological analysis is the proof of Urumqi's strong diurnal wind system, which might have particularly contributed to the stabilization of the nocturnal boundary layer. Annual and seasonal variations of pollutant's concentrations are discussed in the context of occurrences of inversions, boundary layer, stability classes, and ASI. The trend of Urumqi's air pollution indicates a strong increase of mean annual concentrations 2000-2003, followed by a slight increase during 2003-2006. These are in strong contrast to (a) the growth of Urumqi's fleet of motor vehicles and (b) to the growing number of stable regimes of Urumqi's boundary layer climate during same period. It is concluded that the (regional and) local administrative technical countermeasures have efficiently lowered Urumqi's air pollution levels.     

A multi-factor designation method for mapping particulate-pollution control zones in China

A multi-factor designation method for mapping particulate-pollution control zones was brought out through synthetically considering PM₁₀ pollution status, PM₁₀ anthropogenic emissions, fine particle pollution, long-range transport and economic situation. According to this method, China was divided into four different particulate-pollution control regions: PM Suspended Control Region, PM₁₀ Pollution Control Region, PM_2.5 Pollution Control Region and PM₁₀ and PM_2.5 Common Control Region, which accounted for 69.55%, 9.66%, 4.67% and 16.13% of China's territory, respectively. The PM₁₀ and PM_2.5 Common Control Region was mainly distributed in Bohai Region, Yangtze River Delta, Pearl River Delta, eastern of Sichuan province and Chongqing municipality, calling for immediate control of both PM₁₀ and PM_2.5. Cost-effective control effects can be achieved through concentrating efforts on PM₁₀ and PM_2.5 Common Control Region to address 60.32% of national PM₁₀ anthropogenic emissions. Air quality in districts belonging to PM_2.5 Pollution Control Region suggested that Chinese national ambient air quality standard for PM₁₀ was not strict enough. The result derived from application to China proved that this approach was feasible for mapping pollution control regions for a country with vast territory, complicated pollution characteristics and limited available monitoring data.     

Aerosol chemical composition over Istanbul

This study examines the chemical composition of aerosols over the Greater Istanbul Area. To achieve this 325 (PM₁₀) aerosol samples were collected over Bosphorus from November 2007 to June 2009 and were analysed for the main ions, trace metals, water-soluble organic carbon (WSOC), organic (OC) and elemental carbon (EC).PM₁₀ levels were found to be in good agreement with those measured by the Istanbul Municipality air quality network, indicating that the sampling site is representative of the Greater Istanbul Area. The main ions measured in the PM₁₀ samples were Na⁺, Ca²⁺ and non-sea-salt sulphates (nss-SO₄²⁻). On average, 31% of Ca²⁺ was found to be associated with carbonates. Trace elements related to human activities (as Pb, V, Cd and Ni) obtained peak values during winter due to domestic heating, whereas natural origin elements like Al, Fe and Mn peaked during the spring period due to dust transport from Northern Africa. Organic carbon was found to be mostly primary and elemental carbon was strongly linked to fuel oil combustion and traffic. Both OC and EC concentrations increased during winter due to domestic heating, while the higher WSOC to OC ratio during summer can be mostly attributed to the presence of secondary, oxidised and more soluble organics. Factor analysis identified six components/sources for aerosol species in PM₁₀, namely traffic/industrial, crustal, sea-salt, fuel-oil combustion, secondary and ammonium sulfate.