共查询到20条相似文献,搜索用时 158 毫秒
1.
介绍了半山发电厂4号汽轮机(125MW)采用国产第三代先进技术进行通流部分改造的设计特点及其实施情况,并通过热力性能考核试验对改造效果进行了技术分析。 相似文献
2.
介绍某发电公司4^#汽轮机的现状,通过改造前对通流部分进行定量分析和评估,确定汽轮机通流改造的原则和技术,以及汽轮机通流技术改造的主要内容,对比分析通流改造前后的试验数据,评估4^#汽轮机改造后的效果和经济效益。 相似文献
3.
4.
河南开封电厂125MW改造机于2000年4月19日冲转,中午达到额定转速,并顺利完成超速试验、电器试验等,一次起动成功。4月21日开始带负荷,12点10分达到满负荷135MW,最大瓦振17μ。表明我厂125MW机改造技术是成功的。本文阐述了这种机型通流改造的必要性,并详细地介绍了改造机应用的新技术,改造目标及机组的安全性措施,改造后的125MW机热耗1937.3kcat/kWh,煤耗降低约20克/度,无煤耗功率增加10000KW。 相似文献
5.
介绍了山东十里泉发电厂2号汽轮机(125MW)通流部分现代化改造情况,通过采用国际先进的冲动式通流设计改造技术,使机组的安全性、经济性、可靠性得到较大的提高,对国产125MW汽轮机的改进具有参考意义。 相似文献
6.
7.
针对目前在运高压100MW机组经济性差的问题,东方汽轮机厂采用现代化通流技术对其进行改造以达到节能降耗的目的,先后在山西霍州发电厂,新疆玛纳斯发电厂实施了现代化改造。改造后按照ASME PTC6.0进行了热力鉴定试验,均达到了预期效果,本文主要介绍东方汽轮机厂在对新疆玛纳斯发电厂100MW机组改造后的热力试验情况。 相似文献
8.
介绍了上海汽轮机厂300 MW通流改造机组的叶片设计特点以及在设计中采用的先进技术,通过与改造前通流的比对可以看出,改造后的通流安全性和经济性均有所提高,证明改造技术具有广泛的市场前景. 相似文献
9.
建立叶片出汽边削圆,叶片出汽角分布曲线最佳逼近原设计分布曲线的自动扩充叶片通流面积的数学模型,编制成计算机程序,应用于300MW汽轮机组通流改造。 相似文献
10.
分析了目前国内超临界600 MW级汽轮机存在的主要问题,论述了超临界汽轮机通流改造在进排汽、本体结构、密封技术、中低负荷提效优化方面的技术特点,比较了主要改造厂家改造效果,给出了600 MW超临界汽轮机通流改造的原则和改造范围以及通流改造在设计边界条件、保证热耗率选取等方面应注意的问题,为发电企业实施600 MW级超临界汽轮机通流改造工作提供参考。 相似文献
11.
12.
变频调速在发电机组锅炉风机中的应用 总被引:1,自引:0,他引:1
交流变频调速是倍受人们青睐的节能新技术,从理论上分析了小型发电机组锅炉风机应用变频调速器调节风量节电、降低厂用电率的效果,并介绍了一个具体应用实例的测试结果及经济效益。 相似文献
13.
In this paper, the power performance of straight-bladed VAWT is experimentally investigated by wind tunnel experiment and field test. The test rotor is two-bladed with NACA0021 airfoil profile. A survey of varying unsteady wind parameters is conducted to examine the effects of blade pitch angle, Reynolds number and wind velocity on the power performance of VAWT. Moreover, the flow field characteristics are obtained through measuring the wind velocity by Laser Doppler Velocimeter (LDV) system in the wind tunnel experiment and three-cup type anemometers in field test. Power and torque performance are obtained through a torque meter installed in rotor shaft of the wind turbine. Experimental results estimated from the measured values from field test and wind tunnel experiment are compared. In this research, power performance and flow field characteristics are discussed and the relationship between operating conditions and wind velocity are verified. These results provided a theoretical guiding significance to the development of VAWT simplified. 相似文献
14.
15.
16.
CPR1000型辅助电源系统(后续简称LGR系统)通流试验作为LGR系统的一个重要试验,对继电保护二次回路检查有重要作用.在阳江LGR系统通流试验中,采用了一种新的通流方法,将两台变压器并联,通过调节有载开关档位的方法使得两变压器间产生压差,从而在主回路中调节出满足通流试验电流大小的环流,完成通流试验.此方法相比常规的通流试验方法投入的人力和物力更少,操作更方便,效率更高,值得广泛应用于CPR1000核电项目的辅助变电站的通流试验. 相似文献
17.
针对我国内燃机车用大功率柴油机自主开发了一种新型增压器。这种增压器采用了无水冷、高效宽流量压气机叶轮、大腔体等新结构和新技术,标定点压比为3.5~3.6,流量为4.3~4.5 kg/s,单台配机功率为2 330 kW,增压器配机总效率达到61%以上。目前,该型增压器已通过各种考核性试验,达到预期指标。文中介绍了新型涡轮增压器的结构、性能、新压气机叶轮、涡轮开发的过程和增压器的试验情况。 相似文献
18.
A simple but useful technique is proposed to study steady-state line outage and hence voltage collapse of the system. Voltage collapse prediction can be performed through the study of line outages, though techniques for nodal-based prediction or critical-node identification are frequently proposed. Experimentally, it was proven that both line outage and system voltage collapse take place simultaneously. In fact, line outages can be treated as the secondary cause of voltage collapse. A scalar index called line-stability index for each line is calculated based on the power flow through the line. The line-stability index may have a value that varies from zero (no power flows through the line) to one (maximum power flows through the line). Any line exceeding the maximum limit of stability index (1.00) can cause system-wide voltage collapse. The proposed technique is tested on a six-bus standard test system, and encouraging results are observed. The results obtained indicate that the technique has the potential to be used as a tool for system monitoring and future load planning 相似文献
19.
超低水头轴流式水轮机CFD优化及流动特性研究 总被引:1,自引:0,他引:1
结合某水电站改造要求,研发了一种设计水头为2.75 m的超低水头轴流式水轮机并对其性能进行优化,以达到有效利用低水头水力资源的目的。基于不可压缩连续方程及雷诺时均Navier-Stokes方程,采用Spalart-Allmaras湍流模型和SIMPLEC算法对轴流式水轮机进行三维全流场数值模拟,分别分析了轴流式转轮叶片翼型、轮毂比、导叶开度及安放角对水轮机性能的影响,并对最优模型进行实测验证。结果表明,在满足设计水头为2.75 m的情况下,选用配置叶片B、轮毂比为0.30、叶片相对安放角为-2°的水轮机,当导叶相对开度为0°时,装置水力损失最小,最高效率达83.7%,且数值模拟计算所得出力与实测结果误差小于099%,表明基于CFD的数值模拟对超低水头轴流式水轮机的性能预测精度较高。 相似文献