共查询到20条相似文献,搜索用时 312 毫秒
1.
2.
3.
《节能》2020,(1):153-156
随着我国乡村经济的发展,农村地区污水排放量与日俱增,迫切需要因地制宜、经济适用的农村污水处理技术。广东省雷州市等地采用滴滤/固体接触(TF/SC)组合工艺处理农村生活污水,该工艺对水质、水量波动有较强的适应性,出水水质稳定,对氮磷及有机物均有较好的去除效果。其处理结果表明:COD与BOD5的去除率均达85%以上,对氨氮和TP的去除率均超过80%,对TN的去除率为70%以上,出水污染物浓度指标达到《城镇污水处理厂污染物排放标准》(GB 18918—2002)一级B标准以上。TF/SC组合工艺已在雷州等地农村分散式生活污水处理中取得了较为理想的处理效果,在华南地区农村生活污水处理中具有很好的推广应用价值。 相似文献
4.
5.
通过分析小区生活污水的水质,水量特征,系统地介绍小区生活污水处理工艺,并根据多年从事治理小区生活污水的实践经验,阐述了生态住宅小区生活污水处理技术及其典型方案及对存在问题的思考. 相似文献
6.
生态浮床与潜流湿地具有良好的净水效果,能吸收水体中有机污染物。较为系统分析了生态浮床与潜流湿地在上海某农村生活污水处理示范工程中的应用方法及其优缺点,实际考察了生态浮床与潜流湿地藕合技术在处理农村生活污水示范工程中的应用情况。运行结果表明,该工艺技术具有投资少、处理效果好、操作简单、维护成本低等优点,其出水水质达到《污水综合排放标准》(GB8978-1996)一级B排放标准。 相似文献
7.
《节能》2019,(7):114-115
随着经济发展及环保理念的增强,政府对农村生活污水治理工作高度重视,昆明市政府积极推动农村污水治理工作,在滇池流域开展农村污水处理设施及污水治理工作。针对农村污水的特殊性,在集镇及村落根据实际情况建设集镇污水处理站、一体化污水处理设施、三池及生态塘污水处理设施,避免农村污水未经处理直接排放污染地下水资源、土地资源以及流入滇池流域加剧滇池的污染。然而,由于缺乏借鉴模式和管理经验,以及部分设施前期规划设计不合理,在后期运维管理过程存在诸多问题。通过为期1年的实地调研,摸清了滇池流域现存污水处理设施的数量、运行现状及出水水质状况。对其产生原因进行深入分析,并针对存在问题提出切实可行的对策措施。 相似文献
8.
9.
10.
11.
《Progress in Energy and Combustion Science》1999,25(1):55-116
In the current review paper, various issues related to the combustion of sewage sludge are discussed. After briefly explaining the formation and treatment of sewage sludge, current and future sludge production are discussed. Thereafter, the four sludge disposal methods which are currently used, i.e. recycling in agriculture, landfilling, dumping into sea and incineration, are examined, and the future trend presented showing the increasing role of sludge incineration. Thereafter, technologies for thermal processing of sewage sludge are presented. They are discussed in three groups, i.e. mono-combustion, co-combustion and alternative processes. Various mono-combustion incinerators, including multiple hearth, fluidized bed and smelting furnaces are briefly discussed, whereas for co-combustion, attention has been given to co-combustion with coals in pulverized and fluidized bed coal combustors, as well as co-incineration with municipal solid wastes in various furnaces. Where possible, data from large scale plants are presented. Currently being discussed in the sludge disposal cycles are the alternative thermal processes to sludge combustion. These include wet oxidation, pyrolysis, oil from sludge processes, and combinations of pyrolysis, combustion and gasification processes. Some of these alternative technologies are also briefly discussed. An important aspect during thermal processing of sewage sludge is its combustion mechanisms. Compared to coals, sewage sludge has very high contents of moisture and volatile matter which can affect the combustion process. The importance of the drying and devolatilization processes for sewage sludge combustion is thus examined. In a special case, the release and combustion of the volatiles during sludge combustion in fluidized bed combustors is analysed, and some information concerning the combustion of sludge char is presented. Another important issue of sludge combustion is the emissions of pollutants gases as well as the handling of solid by-products. Of concern include the heavy metals, mercury, dioxins and furans, acid gases, as well as NOx and N2O. These are also briefly discussed. A peculiar characteristic of sewage sludge is its high content of nitrogen, and attention has been given to see how this affects the N2O and NOx emissions. In a special case, emission performance of large scale combustors of sewage sludge is presented. 相似文献
12.
雅克拉污水处理站污水管线腐蚀分析及治理建议 总被引:1,自引:0,他引:1
雅克拉污水处理站设计处理污水量为500m3/d,来水主要包括雅克拉站污水、YK12井单井流程污水和大涝坝站污水,处理后出水达到A3标准。污水站自2008年投运至今,污水处理管线及储罐本体累计穿孔40次,主要集中在提升泵进口管线、接收罐进口管线和弯头,频繁更换金属管线和管件,腐蚀治理费用已达27.2万元。影响腐蚀的因素包括污水pH值、矿化度、溶解氧浓度、流体间歇性高流速冲刷、管线材质和加注药剂等。对腐蚀因素进行分析后,建议将污水站低压金属管线更换为非金属管线,玻璃钢管线连接、玻璃钢管线与阀门连接采用承插式连接;将接收罐进口弯头更换为抗冲刷的改型弯头;增设除氧剂加注流程,降低溶解氧浓度;对加注药剂进行改性处理,减缓其对污水管线的腐蚀;在沉降罐开罐检查、处理时,将沉降罐中心筒更换为耐腐蚀材质或有涂层处理的中心筒。 相似文献
13.
污水处理厂下水污泥一般含水率为80%,其余的20%中含有各种有害物质,焚烧是最彻底的无害化处理方法。鼓泡流化床焚烧炉成为主要的污泥焚烧装置。不添加煤等辅助燃料才能保证焚烧处理的环保性使烟气中的污染物不被稀释。烘干后含水率达到~62%,应用基低位热值达到650kcal/kg以上的污泥才能达到焚烧条件。焚烧系统由污泥进料系统、鼓泡流化床焚烧炉、送风系统、排渣及砂循环系统四个单元构成。污泥进料系统中料斗的形状应能防止斗内污泥搭桥、堵塞。鼓泡流化床焚烧炉应保证q3、q4损失接近于0。送风系统中一、二次风机抽气口设置在污泥池内来避免臭气外泄。并设置高温空气预热器使热风温度最高达到500℃。排渣及砂循环系统应保证炉膛密封。 相似文献
14.
15.
16.
以污水源热泵系统冬季工况为例,分别分析了污水调节池体积大小的设计方法,污水调节池设置与否对系统供暖建筑面积的影响,为污水热能利用工程的设计及施工提供参考。 相似文献
17.
医院污水成分复杂,含有重金属、消毒剂、有机溶剂等有毒有害物质,同时还含有病原微生物,具有传染性。医院用水量较大,污水中的污染物浓度和一般生活污水的污染物浓度相似,甚至更低。针对医院污水的特点,在医院污水处理设计规范的基础上,经过大量文献查阅和各种工艺的优化比选,确定该医院污水治理工程采用水解酸化-生物接触氧化-二氧化氯消毒工艺。 相似文献
18.
污水深度处理后的回用 总被引:1,自引:0,他引:1
根据辽河石化污水深度处理回用于循环水补充水、中压锅炉补充水的生产过程,讨论了污水深度处理生产工艺的技术路线及回用效果。并通过数据对比表明,多介质过滤和反渗透技术综合运用于污染物相对复杂的炼厂污水的深度处理,是一种能够保证回用水质量的有效途径。 相似文献
19.
通过对国内外快速客车集便污水排除情况的调研,结合某动车整备所的环境条件,对客车集便器污水的地面接收问题进行了研究,确定了集便器污水的地面接收方式,并且在该线设计中进行了应用. 相似文献
20.
本文了分析当前我国农村水环境污染管理现状,并对生活污水的来源和成分进行了分析,指出当前农村生活污水管理中的具体问题,并针对农村水环境治理提出建议. 相似文献