共查询到20条相似文献,搜索用时 421 毫秒
1.
2.
江阴兴澄特种钢铁有限公司 《节能与环保》2006,(11):52-53
2006年2月16日的《中国冶金报》刊登中国金属学会题为《谁是2005年的领跑者》的权威文章,:公布了2005年我国钢铁生产指标之最,在电炉生产一栏中,兴澄特钢以235千瓦时/吨名列全国电炉生产综合电耗最低. 相似文献
3.
Due to huge-power aircraft development and more electronic devices applied onboard,high heat flow density and uneven thermal distribution are becoming new problems.One new try is adding an air-lubricating oil radiator as the secondary cooling component but there are still few reports on its research.Therefore,this paper proposes a newly-design plate-fin air-lubricating oil radiator different from tube-fin or shell-tube conventionally used in previous engine system.This radiator is arc,and equipped in internal surface of air intake.Numerical and experimental analyses were carried out on fin performance.Their results agreed well with average error of 13%on thermal resistance.Then heat and flow behaviors of oil side were presented with different structures and sizes of flowing passage.According to all research,optimized radiator is gained with fin spacing of 3.76 mm,fin thickness of 2 mm,single flowing path with width of 13 mm and gradient inlet and outlet.Its heat dissipation of 28.35 k W and pressure loss of 2.2 MPa can meet actual working requirements.The research proves an air-lubricating oil radiator with arc structure and layout mode of internal surface to be feasible,which is a new but efficient cooling scheme and can lead to an innovative but wide use in modern aircrafts. 相似文献
4.
5月6日,中国残奥委、中国残疾人事业新闻宣传促进会在人民大会堂联合举行新闻发布会宣布,我国能源行业新贵江苏太阳雨太阳能集团成为残奥助威团全程独家合作伙伴,在圣火传递中感动全球的残疾人运动员金晶成为"残奥助威团"的形象大使. 相似文献
5.
1341材料在循环水泵上的应用 总被引:1,自引:0,他引:1
对热电厂发电机的三台循环水泵的运行状况进行了分析,并用BELZONA1341材料对水泵叶轮的表面进行了处理,减少了叶轮表面与水流的阻力和涡流的产生,降低了电机的有功电流,节约了电能,并且延长设备的寿命,效果十分明显. 相似文献
6.
The temperature uniformity and component concentration distributions in solid oxide fuel cells during operating processes can influence the cell electrochemical and thermal characteristics.A three-dimensional thermal-fluid numerical model including electrochemical reactions and water-gas-shift(WGS)reaction for a single channel solid oxide fuel cell was developed to study the steady-state characteristics,which include distributions of the temperature(T),temperature gradient((35)T/(35)x),and fuel utilization.It was shown that the maximum temperature(Tmax)changed with operating voltage and the maximum temperature gradient(((35)T/(35)x)max)occurred at the inlet of the channel of a solid oxide fuel cell by simulation.Moreover,the natural convection condition had a great influence on T and(35)T/(35)x.The thermal stress generated by temperature differences was the key parameter and increasing the convection heat-transfer coefficient can greatly reduce the thermal stress.In addition,the results also showed that there were lower temperature gradients and lower current density at high working voltage;therefore,choosing the proper operating voltage can obtain better cell performance. 相似文献
7.
8.
9.
10.
<正>中国-欧盟能源环境项目是中国和欧盟在能源环境方面合作开展的一个政府技术援助项目,2007年,中国-欧盟能源环境项目在国家发展和改革委员会和欧盟驻华代表处的高度重视和领导下,在资源节约和环境保护司、能源局等相关部门、机构的指导和大力支持、 相似文献
11.
12.
【摘要】 目的 探讨双源CT血管造影(DSCTA)诊断冠状动脉狭窄的准确性。方法 2012年11月到2013年11月对210例冠状动脉病变患者作DSCTA检查及选择性冠状动脉造影(CAG)检查,以CAG为金标准,评价DSCTA诊断冠状动脉狭窄的准确性。选取双源CT和CAG检查后均接受前降支支架植入术患者各30例,对比造影体位、介入操作时间和对比剂使用剂量。结果 DSCTA检查210例患者2 630节段冠状动脉有不同程度狭窄或闭塞,与CAG检查比较,诊断敏感度、特异度、阳性预测值、阴性预测值分别为95.4%、96.2%、91.3%、100%,两种方法间差异无统计学意义(P=0.066)。DSCTA造影体位2~3个、介入操作时间约15 min、对比剂使用剂量为48 ml(30~150 ml),分别比CAG减少2~4个、缩短约10 min、减少一半。结论 DSCTA诊断冠状动脉狭窄病变准确性高,近似于CAG,是一种安全可靠的无创检查方法。术前DSCTA检查可减少术中患者造影体位及对比剂使用剂量,缩短介入治疗时间,达到减少医源性放射性辐射的目的。
相似文献
相似文献
13.
目的评价64排螺旋CT冠状动脉(冠脉)成像(CTA)在冠心病诊断中的应用价值。方法以选择性冠脉造影(SCA)结果为金标准,采用64排螺旋CT对68例疑诊冠心病患者的冠脉主干及主要分支272节段进行重建和分析,评价其诊断冠心病的灵敏度和特异度。结果CTA能够清晰显示冠脉主干及其分支狭窄、钙化、开口起源异常及桥血管病变,CTA发现钙化病变52节段,SCA仅发现钙化病变35节段。CTA诊断冠脉病变的灵敏度96.33%,特异度98.16%,阳性预测值97.22%,阴性预测值97.56%。其中对左主干、左前降支病变及>75%的病变灵敏度最高,分别达到100%和94.4%。结论CTA对冠脉狭窄病变、桥血管、开口畸形、支架管腔均显影良好,对冠心病诊断有较高的准确性,对钙化病变诊断率优于冠脉造影,可以作为冠心病高危人群无创性筛选检查及冠脉支架术后随访手段。 相似文献
14.
【摘要】 目的 探讨数字平板血管造影机支架影像增强显影(SBS)技术在指导冠状动脉开口病变介入治疗中的应用效果。方法 收集2012年3月至2014年10月期间武警部队总医院采用经皮冠状动脉介入治疗(PCI)的连续55例冠状动脉开口病变患者的临床资料,对58个开口病变植入支架前后作SBS检查和血管内超声(IVUS)验证。根据支架完全膨胀和精确定位相关标准评价SBS检查和IVUS验证结果。结果 对比IVUS验证结果,SBS技术精确指导PCI手术中48个(48/58,82.8%)病变的支架定位,同时检测到8个(8/58,13.8%)病变为支架膨胀不全。SBS技术预测支架膨胀不全的特异度为100%,灵敏度为80%。SBS检测到的支架管腔最小面积(MSA)与IVUS验证的MSA呈明显正相关(r=0.95,P<0.001)。结论 SBS技术是一种简便易行、能精确提供植入支架定位及支架完全膨胀信息的方法,可常规应用于PCI术治疗冠状动脉开口病变,尤其适用于那些无法开展IVUS检查的临床中心。 相似文献
15.
16.
目的探讨冠状动脉瘘介入治疗的临床指征及方法.方法总结经导管介入治疗(介入组)冠状动脉瘘17例,其中应用Cook公司非可控弹簧圈11例,可控弹簧圈2例;Pfm可控弹簧圈1例,AGA公司Amplatzer Duct-Occluder 3例;外科手术(手术组)修补术26例.结果介入组除早期3例因所选弹簧圈太小,而且为非可控,导致术后弹簧圈移位,2例经导管术取出,1例行外科手术修补并取出弹簧圈,其余病例均获成功,平均随访3年.均无残余分流及其他并发症.手术组均获成功,无死亡病例.结论冠状动脉瘘经合理的治疗可取得良 相似文献
20.
目的比较从不同入路行冠状动脉造影的优缺点。方法812例行选择性冠状动脉造影的患者,按照入路不同分为左、右桡动脉和股动脉途径3组,比较手术成功率、并发症种类及发生率,患者术后的舒适度,联合其他介入诊治的种类及成功率等。结果3组患者的手术时间、X线暴露时间、对比剂用量无明显差异(P>0.05),右侧桡动脉组手术成功率稍低于股动脉组(P<0.05)。桡动脉组有一定的血管痉挛、术后的动脉闭塞发生率,而股动脉组的局部血管并发症发生率较高。2组桡动脉组的舒适度均高于股动脉途径组(P<0.05)。3种入路均分别可成功联合行其他种类的介入诊治。结论正确地个体化选择造影入路可为患者及临床医师本身带来极大的益处。 相似文献