One-pot synthesis of ultrasmall PtAg nanoparticles decorated on graphene as a high-performance catalyst toward methanol oxidation

A one-pot synthesis method is utilized for the fabrication of ultrasmall platinum-silver nanoparticles decorated on graphene (PtAg/G) catalyst. This method has several advantages such as inexpensiveness, simplicity, low temperature, surfactant free, reductant free, being environmentally friendly and greenness. In this work, graphene and silver formate were dispersed in ultrapure water in an ultrasonic bath at 25 °C followed by through a galvanic displacement reaction; to prepare PtAg/G, PtCl₂ was added to the suspension under mild stirring condition. The morphology, crystal structure and chemical compositions of the as-fabricated PtAg/G and Pt/C catalysts were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Energy dispersive X-ray spectroscopy (EDS) techniques. Electrochemical techniques, including cyclic voltammetry (CV) and chronoamperometry (CA) measurements were used to analyze the electrochemical activity of the PtAg/G and Pt/C catalysts. The TEM images illustrate the uniform distribution of ultrasmall PtAg nanoparticles with the average size of 2–3 nm on the graphene nanosheets. The PtAg/G promoted the current density 2.46 times as much as Pt/C with a negative shift in onset oxidation potential and peak potential for oxidation reaction of methanol. Besides, the novel PtAg/G catalyst shows large electrochemically active surface area, lower apparent activation energy, and higher levels of durability in comparison to the Pt/C catalyst for the oxidation of methanol. The PtAg/G catalyst depicts extraordinary catalytic performance and stability to those of the Pt/C catalyst toward methanol oxidation in alkaline media.     

Noble metal-free FeN-CNFs as an efficient electrocatalyst for oxygen reduction reaction

Carbonaceous materials containing non-precious metal atoms and doped with nitrogen have enthralled stunning attention in the field of electrochemical energy conversion systems. Herein, we demonstrated a facile method to fabricate iron and nitrogen doped carbon nanofiber (FeN-CNFs) catalyst material from ferric chloride and interfacial synthesized polyaniline (PANI) nanofibers, by carbonization process in an inert atmosphere at 800 °C. Further, synthesized material was characterized by elemental analysis and X-ray photoelectron spectroscopy (XPS) that confirms the presence of FeN bonds. The structural and morphological features are studied using various microscopy and spectroscopy techniques. The oxygen reduction reaction (ORR) activity of synthesized catalyst materials was examined by rotating disk electrode experiments in 0.1 M KOH. Among all these synthesized materials FeN-CNFs material showed enhanced ORR activity regarding current density and onset potential. Also, FeN-CNFs catalyst exhibited tolerance to methanol and durability in comparison to commercial Pt/C catalyst. The superior performance of FeN-CNFs may be attributed due to the introduction of Fe and formation of FeN bond in catalyst material.     

Hydrogen-iodide decomposition over PdCeO2 nanocatalyst for hydrogen production in sulfur-iodine thermochemical cycle

A highly active and stable catalyst for hydrogen-iodide decomposition reaction in sulfur-iodine (SI) cycle has been prepared in the form of PdCeO₂ nanocatalyst by sol-gel method with different calcination temperatures (300 °C, 500 °C, and 700 °C). XRD and TEM confirmed a size around 6–8 nm for PdCeO₂ particles calcined at 300 °C. Raman study revealed large number oxygen vacancies in PdCeO₂-300 when compared to PdCeO₂-500 and PdCeO₂-700. With increase in calcination temperature, the average particle size increased whereas the specific surface area and number of oxygen vacancies decreased. Hydrogen-iodide catalytic-decomposition was carried out in the temperature range of 400°C–550 °C in a quartz-tube, vertical, fixed-bed reactor with 55 wt % aqueous hydrogen-iodide feed over PdCeO₂ catalyst using nitrogen as a carrier gas. PdCeO₂-300 showed hydrogen-iodide conversion of 23.3%, which is close to the theoretical equilibrium conversion of 24%, at 550 °C. It also showed a reasonable stability with a time-on-stream of 5 h.     

AuCu alloys deposited on titanium dioxide nanosheets for efficient photocatalytic hydrogen evolution

This work first reports AuCu alloys deposited on the surface of TiO₂ nanosheets (TiNs) to form heterojunction. A simple deposition-precipitation method was used to construct a new type of AuCu/TiNs heterostructures through gradually depositing Au and Cu nanoparticles on TiNs. Such structures served the dual advantage of constructing a heterostructure which can improve visible light absorption, and the formation of a Schottky barrier between AuCu alloys (lower Fermi level) and TiNs (higher Fermi level) which can suppress the recombination of photo-generated charge carriers to improve the overall photocatalytic activity. The mass ratio of Au and Cu in the AuCu/TiNs heterostructures and the sequence and method of their deposition are found to be the important factors which affect the photocatalytic performance. When the mass ratio of Au to Cu was determined to be 1: 1, the AuCu/TiNs heterostructure exhibited the best photocatalytic performance for hydrogen production from water splitting (over 9 times than TiNs, 1.47 times than Au/TiNs, and 1.75 times than Cu/TiNs).     

Efficient visible-light-driven hydrogen evolution over ternary MoS2/PtTiO2 photocatalysts with low overpotential

By surface-decorating PtTiO₂ hybrid catalyst with MoS₂ nanosheets, we prepared a new MoS₂/PtTiO₂ ternary system as high-performance photocatalysts. The ternary MoS₂/PtTiO₂ outperforms both the binary MoS₂TiO₂ and PtTiO₂ systems in photocatalytic hydrogen evolution with an AQY (apparent quantum yield) value of 12.54% at 420 nm, owing to the unique ternary design that creates more efficient electron transport path and electron-hole separation mechanism. Electrochemical characterization showed that the MoS₂/PtTiO₂ ternary electrode afford an efficient pathway of photo-excited electrons from TiO₂ to surface-decorated Pt nanoparticles using MoS₂ and internal Pt nanoparticles as bridges, thus significantly promoting electron transfer, reducing the system overpotential and leading to the activation of more reactive sites. This internal electron transfer pathway (TiO₂ → Pt (internal) → MoS₂ → Pt (surface)) eliminates the need of other metal cocatalysts because the Pt nanoparticles play two roles of storing the conduction band electrons of TiO₂ and acting as co-catalyst for reduction of protons to hydrogen. This unique ternary metal-semiconductor heterojunction for efficient photocatalytic hydrogen evolution provides a meaningful reference for reasonable design of other hybrid photocatalysts.     

Mechanistic insights into tandem amine-borane dehydrogenation and alkene hydrogenation catalyzed by [Pd(NHC)(PCy3)]

The mechanism of tandem dimethylamine-borane (NHMe₂BH₃, DMAB) dehydrogenation and alkene hydrogenation catalyzed by [Pd(NHC)(PMe₃)] are investigated by density functional theory (DFT) calculations [NHC = N,N′-bis(2,6-diisopropylphenyl) imidazole-2-ylidene]. Four possible DMAB dehydrogenation mechanisms have been carefully investigated involving concerted BH/NH activation, sequential BH/NH activation, sequential NH/BH activation, and proton transfer mechanism. DFT studies show that the NH proton transfers to ligated carbene carbon and sequential CH/BH activation is the most kinetically favorable pathway with the lowest activation barrier of 23.8 kcal/mol. For hydrogenation, it was found that a trans-dihydride Pd(II) complex, [Pd(H)₂(NHC)(PMe₃)], formed in the dehydrogenation process, serves as an effective catalyst for reduction of trans-stilbene.     

Bimetallic Pt-M electrocatalysts supported on single-wall carbon nanotubes for hydrogen and methanol electrooxidation in fuel cells applications

A series of PtRu and PtMo bimetallic catalysts were prepared via a chemical reduction method by bubbling CO to form carbonyl compounds as metal precursors. In both cases the PtRu and PtMo bimetallic electrocatalysts achieved the maximum activity when the amount of Ru and Mo in the material was 50%wt. The physicochemical characterization of the electrocatalytic materials through X-ray diffraction (XRD) and transmission electron microscopy (TEM) has determined the presence of bimetallic structures. The electrochemical characterization using cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and polarization curves in Proton Exchange Membrane Fuel Cells (PEMFC) and Direct Methanol Fuel Cell (DMFC) allowed to systematically investigate the electrocatalytic activity of the synthesized materials for the electrooxidation of hydrogen and methanol. The PtRu/SWCNT electrocatalysts showed a higher current density at least 7-fold and 3-fold compared with Pt/SWCNT and PtMo/SWCNT electrocatalysts, respectively. Besides, the Pt50%–Ru50%/SWCNT exhibited a shifting to negative values in the onset potential reaction for the electrooxidation of methanol of 200 mV in comparison with Pt100%/SWCNT and Pt50%–Mo50%/SWCNT electrocatalysts. The experimental and simulated polarization curves obtained from DMFC show that PtRu/SWCNT and PtMo/SWCNT electrocatalysts exhibited higher power and current densities values compared with the Pt/SWCNT electrocatalyst. The membrane-electrode assembly (MEA) with Nafion^® and the PtRu/SWCNT electrocatalysts showed an open-circuit voltage value of 0.730 V, significantly higher than that the values for the MEAs with Pt/SWCNT (0.663 V) and PtMo/SWCNT (0.633 V), respectively.     

Theoretical evaluation of PdAg membrane reactor performance during biomass steam gasification for hydrogen production using CFD method

In recent years, biomass has been introduced as a promising solution for environmental crisis. Biomass steam gasification is a valuable process for hydrogen production. Main problem of this process is low conversion and low partial pressure of hydrogen in product stream. PdAg membrane reactor (MR) can be used in biomass steam gasification to improve the process efficiency. Hence, Computational fluid dynamic (CFD) method was used in this study for a detail modeling and analyzing the biomass steam gasification in a two-dimensional PdAg MR. After good agreement of CFD model results with literature experimental data, simulation results was indicated that the PdAg MR has better efficiency compared with traditional reactor (TR). Biomass conversion of near 100%, CO selectivity in the range 0–14 and H₂ recovery of 70% in the best condition were achieved. In addition, different flow patterns (cocurrent and counter-current modules) were compared for MR and overall efficiency (biomass conversion) of counter-current model was obtained higher than co-current model. In summary, for all operating conditions and modules, PdAg MR was showed better efficiency compared with TR.     

Mesocrystalline Ta2O5 nanosheets supported PdPt nanoparticles for efficient photocatalytic hydrogen production

We successfully synthesized mesocrystalline Ta₂O₅ nanosheets supported bimetallic PdPt nanoparticles by the photo-reduction method. The as-prepared mesocrystalline Ta₂O₅ nanosheets in this work showed amazing visible-light absorption, mainly because of the formation of oxygen vacancy defects. And the as-prepared bimetallic PdPt/mesocrystalline Ta₂O₅ nanaosheets also showed highly enhanced UV–Vis light absorption and highly improved photocatalytic activity for hydrogen production in comparison to that of commercial Ta₂O₅, mesocrystalline Ta₂O₅ nanosheets, Pd/mesocrystalline Ta₂O₅ nanosheets and Pt/mesocrystalline Ta₂O₅ nanosheets. The highest photocatalytic hydrogen production rate of PdPt/mesocrystalline Ta₂O₅ nanaosheets was 21529.52 g^?1 h^?1, which was about 21.2 times of commercial Ta₂O₅, and the apparent quantum efficiency of PdPt/mesocrystalline Ta₂O₅ nanaosheets for hydrogen production was about 16.5% at 254 nm. The highly enhanced photocatalytic activity was mainly because of the significant roles of PdPt nanoparticles for accelerating the charge separation and transport upon illumination. The as-prepared PdPt/mesocrystalline Ta₂O₅ nanaosheets in this work could serve as an efficient photocatalyst for green energy production.     

Pulsed electrodeposition of reduced graphene oxide on NiNiO foam electrode for high-performance supercapacitor

Through electrodeposition, controlling hydrogen evolution reaction and selective electrochemical dealloying of copper from NiCu porous foam, highly nanoporous nickel and nickel oxide is fabricated on the copper surface. Electrochemically reduced graphene oxide (ERGO) is loaded on the NiNiO foam as high-performance electrodes for supercapacitors through pulsed galvanostatic reduction of drop casted graphene oxide nanosheets at different duty cycles and frequencies. Surface morphology and composition of fabricated ERGO/NiNiO foam composite electrodes are characterized using scanning electron microscopy (SEM), powder X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Raman Spectroscopy. Electrochemical impedance spectroscopy (EIS) measurements, galvanostatic charge/discharge (GCD) and cyclic voltammetry (CV) are carried out to study the electrochemical behavior of ERGO/NiNiO foam electrodes. From structural and electrochemical characterizations, optimized parameters for pulse duty cycle and frequency were found to be 10% and 1000 Hz, respectively. As a result, the ERGO/NiNiO foam film (i_c = ?10 mA/cm², f = 1000 Hz and DC = 10%) provides a specific capacitance of 2298 F/g in 1 M KOH at a current density of 1 A/g. Stability study of fabricated film represents a long cycling life up to 4000 cycles with 0.7% decay in specific capacitance at the high current density of 20 A/g in the potential range of 0–0.6 V vs. saturated calomel electrode (SCE).     

Effective excitons separation on graphene supported ZrO2TiO2 heterojunction for enhanced H2 production under solar light

A novel photocatalyst comprises of ZrO₂TiO₂ immobilized on reduced graphene oxide (rGO) – a ternary heterojunction (ZrO₂TiO₂/rGO) was synthesized by using facile chemical method. The nanocomposite was prepared with a strategy to achieve better utilization of excitons for catalytic reactions by channelizing from metal oxide surfaces to rGO support. TEM and XRD analysis results revealed the heterojunction formed between ZrO₂ and single crystalline anatase TiO₂. The mesoporous structure of ZrO₂TiO₂ was confirmed using BET analysis. The red shift in absorption edge position of ZrO₂TiO₂/rGO photocatalyst was characterized by using diffuse reflectance UV–Visible spectra. ZrO₂TiO₂/rGO showed greater interfacial charge transfer efficiency than ZrO₂TiO₂, which was evidenced by well suppressed PL intensity and high photocurrent of ZrO₂TiO₂/rGO. The suitable band gap of 1.0 wt% ZrO₂TiO₂/rGO facilitated the utilization of solar light in a wide range by responding to the light of energy equal to as well as greater than 2.95 eV by the additional formation of excited high-energy electrons (HEEs). ZrO₂TiO₂/rGO showed the enhanced H₂ production than TiO₂/rGO, which revealed the role of ZrO₂ for the effective charge separation at the heterojunction and the solar light response. The optimum loading of 1.0 wt% of ZrO₂ and rGO on TiO₂ showed the highest photocatalytic performance (7773 μmolh^?1$g_{cat}^{?1}$) for hydrogen (H₂) production under direct solar light irradiation.     

PtCo@NCNTs cathode catalyst using ZIF-67 for proton exchange membrane fuel cell

Zeolitic Imidazolate Frameworks (ZIF) is one of the potential candidates as highly conducting networks with large surface area with a possibility to be used as catalyst support for low temperature fuel cells. In the present study, highly active state-of-the-art PtCo@NCNTs (Nitrogen Doped Carbon Nanotube) catalyst was synthesized by pyrolyzing ZIF-67 along with Pt precursor under flowing ArH₂ atmosphere. The multi-walled NCNTs were densely grown on the surface of ZIF particles after pyrolysis. The high resolution TEM examination was employed to examine the nature of the PtCo particles as well as multi-walled NCNTs. Rotating disk electrode study was used for measuring oxygen reduction reaction performance for PtCo@NCNTs in 0.1 M HClO₄ and compared with commercial Pt/C catalyst. Fuel cell performance with PtCo@NCNT and commercial Pt/C catalysts was evaluated at 70 °C using Nafion-212 electrolyte using H₂ and O₂ gases (100% RH) and the observed peak power density of 630 and 560 mW cm^?2, respectively.     

Interface stability between bare,MnCo spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant

This study is focused on a diopside-based glass-ceramic sealant for solid oxide fuel cells and its compatibility with AISI 441 stainless steel interconnect. The morphological and chemical stability with both bare and MnCo spinel coated AISI 441 steel, after 3500 h exposure at 800 °C in air, is reviewed and discussed. Post-mortem samples are morphologically and chemically analysed by SEM-EDS. Reaction products at the glass-ceramic/bare AISI 441 interface, resulting from the reaction of Mg from the sealant and Cr and Mn from the steel, are detected, without affecting negatively the integrity of the joints. In the case of MnCo spinel coated AISI 441, interactions between the glass-ceramic and the outer part of the MnCo spinel coating, along with crystallization of oxides rich in Si and Mg, are detected, but still no corrosion phenomena are present. The glass-ceramic is found to be compatible with both bare and coated AISI 441.     

Hydrogen production via propane dry reforming: Carbon deposition and reaction-deactivation study

Carbon deposition during carbon dioxide reforming reaction of C₃H₈ has been studied over alumina-supported bimetallic Mo/CoNi catalysts. To better understand the carbon-induced deactivation during the reforming reaction, changes in catalyst morphology and carbon deposition kinetics were examined. Different characterization techniques were used for both fresh and rejuvenated catalysts including liquid nitrogen adsorption/desorption, chemisorption via hydrogen, ammonia and CO₂ desorption, and thermogravimetric measurement of the coked catalysts. The time dependant reaction rate profiles indicated that MoNi catalyst has higher syngas (H₂/CO) formation rates with lower CO₂ rate of consumption compared to CoNi catalyst. However, the H₂:CO ratio values were almost the same for both catalysts suggesting similarity in the product formation pathway. Conversion-time analysis showed that MoNi catalyst was more stable and active during a 72-h run while CoNi suffered noticeable deactivation after 30 h on-stream. Reaction-deactivation models implicated a higher deactivation coefficient (k_d) with activation energy of E_d = 78.1 kJ mol^?1 for the cobalt-containing Ni catalyst, while the Ni catalyst with molybdenum had a lower deactivation coefficient with smaller activation energy of just under 70 kJ mol^?1. Post-mortem analysis (TPR-TPO dual cycle and TOC) of spent catalysts confirmed that the surface of CoNi catalyst has more carbon residue than the MoNi sample which was consistent with the higher deactivation of CoNi.     

NiPt sinter as a promising electrode for methanol electrocatalytic oxidation

Methanol is one of the chemical compounds utilized in fuel cells. The direct methanol fuel cell (DMFC) can be applied in many devices such as light electric vehicles and field equipment. Such a fuel cell is characterized by its high fuel energy density and low pollution. Despite many advantages of DMFCs, they are not commercially available, as the most efficient catalyst, which can be used in this process, has not been developed yet. Traditionally, it was platinum that was used in these fuel cells which is expensive and susceptible to CO poisoning. The solution to this is the use of bimetallic catalysts such as a NiPt system. In this study, we used a sintered NiPt electrode as the anode for the electrocatalytic oxidation of methanol. Based on our results, the sintered NiPt electrodes exhibited much higher activity in the oxidation of methanol, when compared with some conventional anodes.     

Fabrication of CdS/NiFe LDH heterostructure for improved photocatalytic hydrogen evolution from aqueous methanol solution

2D CdS/NiFe LDH (short for layered double hydroxide) heterostructures were designed and fabricated by following a facile in-situ growth method. The CdS nanoparticles are well dispersed on the surface of NiFe LDH to form nanoscale heterojunctions, as suggested from the TEM and elemental mapping images. The composites with optimum CdS amount (15 wt%) take on notably higher hydrogen evolution activity (469 μmol h^?1 g^?1) than the independent CdS and NiFe LDH from aqueous methanol solution under xenon lamp irradiation. The nano-heterojunction notably promotes the H₂ evolution kinetics and greatly suppresses the recombination of photo-induced electrons and holes, which is responsible for the enhanced photocatalytic activity of the composites, as demonstrated by the reducing onset potential and increasing photocurrent of the composites in the photoelectrochemical experiments. The possible photocatalytic mechanism is proposed on the basis of the defined position of energy band edges.     

Role of metal type on mesoporous KIT-6 for hydrogen storage

Hydrogen is envisaged to become an alternative clean energy source to fossil fuels that eventually lead to gradually increasing demand to design an efficient adsorbent for high storage capacity. Being inspired from the metal-doped adsorbents, mesoporous KIT-6 was functionalized with different metals namely Ce, Co, Cr, Cu, Ni, Pd, Pt, Sn and Ti with constant loading by wet impregnation method. Hydrogen adsorption performance showed that the metal doping improves the hydrogen storage capacity of KIT-6 except for KCu. Adsorbents KPd and KPt showed small hysteresis during adsorption/desorption analysis. Among all the metals, Pd-doped KIT-6 (KPd) showed the maximum uptake capacity (0.31 wt%) at atmospheric conditions. However, Sn-doped KIT-6 (KSn) showed the maximum uptake of 4.74 wt% at 77 K and 40 bar. This study provides a thorough insight in to the hydrogen adsorption/desorption behavior of the various metal–doped KIT-6 studied, which could be important first-hand information before designing the hydrogen storage material for the practical application.     

Supercapacitor with superior electrochemical properties derived from symmetrical manganese oxide-carbon fiber coated with polypyrrole

A supercapacitor electrode comprising conducting polypyrrole (PPy) coated on manganese oxide-carbon fiber (CNFMnO₂) was successfully synthesized using electrospinning, followed by carbonization and in-situ polymerization. A non-uniform distribution of PPy on the surface of CNFMnO₂ was observed via FESEM analysis. The chemical bonding of CNFMnO₂/PPy and the valence state of manganese were revealed via FTIR, Raman spectroscopy, XRD and XPS measurements. CNFMnO₂/PPy composite possessed high specific capacitance and specific energy of 315.80 Fg^?1 and 13.68 Wh/kg, respectively. In addition, good electrochemical reversibility was proven upon CNFMnO₂/PPy even at higher sweep rate (5–200 mV/s). Moreover, this one-dimensional electrode achieved an excellent long-term cycling stability (82.46%) over 2000 CV cycles with low charge transfer resistance (4.61 Ω). The modification of CNFMnO₂/PPy contributes to good synergistic effects among the material which improve the electrochemical behavior of manganese oxide-based fiber composite for future supercapacitor.     

AuNi alloy nanoparticles supported on reduced graphene oxide as highly efficient electrocatalysts for hydrogen evolution and oxygen reduction reactions

Bimetallic nanoparticles of Au and Ni in the form of alloy nanostructures with varying Ni content are synthesized on reduced graphene oxide (rGO) sheets via a simple solution chemistry route and tested as electrocatalysts towards the hydrogen evolution (HE) and oxygen reduction (OR) reactions using polarization and impedance studies. The AuNi alloy NPs/rGO nanocomposites display excellent electrocatalytic activity which is found to improve with increasing Ni content in the AuNi/rGO alloy nanocomposites. For HER, the best AuNi alloy NPs/rGO electrocatalyst, the one with the highest Ni content, exhibits high activity with an onset overpotential approaching zero versus the reversible hydrogen electrode and an overpotential of only 37 mV at 10 mA cm^?2. Additionally, a low Tafel slope of 33 mV dec^?1 and a high exchange current density of 0.6 mA cm^?2 are measured which are very close to those of commercial Pt/C catalyst. Also, in the ORR tests, this electrocatalyst displays comparable activity to Pt/C. The Koutecky–Levich plots referred to a 4-electron mechanism for the reduction of dissolved O₂ on the AuNi alloy NPs/rGO catalyst. The electrocatalyst thus demonstrates excellent activity towards HER and ORR. Additionally, it exhibits outstanding operational durability and activation after 10,000^th cycles assuring its practical applicability.     

The effects of Co/Ce loading ratio and reaction conditions on CDRM performance of CoCe/ZrO2 catalysts

This work mainly aims to establish a link between Co/Ce loading ratio in CoCe/ZrO₂ catalysts and their Carbon Dioxide Reforming of Methane (CDRM) performance. In this context, catalysts with different Co and Ce loadings were prepared and characterized via BET, XRD, HRTEM-EDX, XPS and Raman, and parametrically tested under different CDRM conditions. Dispersion of Co particles was nonhomogeneous on all samples. For the sample with the highest Co/Ce ratio (10%Co2%Ce/ZrO₂), higher amount of lattice oxygen vacancies and lowest degree of ceria reduction were determined. Raman analysis showed that graphitic carbon coexisted with amorphous carbon on the surface of all spent samples. The extent of side reactions prevailed in determining selectivity. It was expressed that both CoCe synergistic interaction and synchronous contribution of Ce and ZrO₂ were enhanced for the samples having lower Co/Ce ratio. It was confirmed that Ce is only responsible for oxygen transfer but not its formation.