Enhanced hydrogen storage performance of Cu3(BTC)2 in situ inserted with few-layer silicon-based nanosheets

Silicon-based nanosheets (SNS) were synthesised via a mild (60 °C) and time-saving (8 h) modified topochemical method. Then, Cu₃(BTC)₂ and SNS@Cu₃(BTC)₂ were successfully synthesised by microwave irradiation, and their characteristics and hydrogen storage performance were analysed by multiple techniques. The accordion-like SNS exhibited void spaces, a unique low buckled structure, and ultrathin, almost transparent, loosely stacked layers with a high specific surface area (362 m²/g). After in-situ synthesis with Cu₃(BTC)₂, the SNS compound achieved a high specific surface area (1526 m²/g), outstanding hydrogen storage performance (5.6 wt%), and a desirable hydrogen diffusion coefficient (10^?7). Thus, SNS doping improved the hydrogen storage performance of Cu₃(BTC)₂ by 64% through electron transfer reactions with Cu enabled by the unique composite nanostructure of SNS@Cu₃(BTC)₂. This study presents a promising method of synthesising SNS and porous composite materials for hydrogen storage.     

Producing hydrogen from the fermentation of cheese whey and glycerol as cosubstrates in an anaerobic fluidized bed reactor

This study aimed to evaluate the effect of the organic loading rate (OLR) (60, 90, and 120 g Chemical Oxygen Demand (COD). L^?1. d^?1) on hydrogen production from cheese whey and glycerol fermentation as cosubstrates (50% cheese whey and 50% glycerol on a COD basis) in a thermophilic fluidized bed reactor (55 °C). The increase in the OLR to 90 gCOD.L^?1. d^?1 favored the hydrogen production rate (HPR) (3.9 L H₂. L^?1. d^?1) and hydrogen yield (HY) (1.7 mmol H₂. gCOD^?1_app) concomitant with the production of butyric and acetic acids. Employing 16S rRNA gene sequencing, the highest hydrogen production was related to the detection of Thermoanaerobacterium (34.9%), Pseudomonas (14.5%), and Clostridium (4.7%). Conversely, at 120 gCOD.L^?1. d^?1, HPR and HY decreased to 2.5 L H₂. L^?1. d^?1 and 0.8 mmol H₂. gCOD^?1_app, respectively, due to lactic acid production that was related to the genera Thermoanaerobacterium (50.91%) and Tumebacillus (23.56%). Cofermentation favored hydrogen production at higher OLRs than cheese whey single fermentation.     

HRT control as a strategy to enhance continuous hydrogen production from sugarcane juice under mesophilic and thermophilic conditions in AFBRs

The objective of this study was to evaluate the effects of hydraulic retention time (HRT) (8–1 h) on H₂ production from sugarcane juice (5000 mg COD L⁻¹) in mesophilic (30 °C, AFBR-30) and thermophilic (55 °C, AFBR-55) anaerobic fluidized bed reactors (AFBRs). At HRTs of 8 and 1 h in AFBR-30, the H₂ production rates were 60 and 116 mL H₂ h⁻¹ L⁻¹, the hydrogen yields were 0.60 and 0.10 mol H₂ mol⁻¹ hexose, and the highest bacterial diversities were 2.47 and 2.34, respectively. In AFBR-55, the decrease in the HRT from 8 to 1 h increased the hydrogen production rate to 501 mL H₂ h⁻¹ L⁻¹ at the HRT of 1 h. The maximum hydrogen yield of 1.52 mol H₂ mol⁻¹ hexose was observed at the HRT of 2 h and was associated with the lowest bacterial diversity (0.92) and highest bacterial dominance (0.52).     

CuWO4 as a novel Z-scheme partner to construct TiO2 based stable and efficient heterojunction for photocatalytic hydrogen generation

Synthesis of highly efficient, stable, visible active CuWO₄ nanoparticles through a simple methodology, paves a feasible path for enhancing the efficiency of TiO₂. A novel nanocomposite of CuWO₄ NP loaded TiO₂ NR heterojunction was mounted through a direct Z-scheme mechanism. Optimized composite CWT-3, advances the photocatalytic hydrogen production rates of TiO₂ to 106.7 mmol h^?1 g^?1_cat. CuWO₄ incorporation as OEP compensates inefficiency of WO₃ and other Z-scheme combinations reported so far, on limiting the charge carrier recombination followed by the generation of a greater number of excitons. Specific amounts of catalyst loading, study on the effect of sacrificial reagents, and understanding the effect of the light source, are the three pivotal steps that helped here to hamper the density of overall back reactions. The formation of Z-scheme heterojunction was evidently confirmed on determining the position of CBM and VBM, PL and photoelectrochemical analysis. Recyclability studies further proved the stable and efficient outcomes of CWT-3 for five consecutive cycles. Based on photocatalytic activity, employing BDF by-product glycerol as an optimized sacrificial reagent serves the oxidation demands and triggered 53.26% solar to hydrogen conversion efficiency under natural sunlight irradiation.     

Polyaniline sensitized Pt@TiO2 for visible-light-driven H2 generation

Polyaniline is a typical conducting polymer with high migration electron rate, good stability, eco-friendly properties, and high absorption coefficients for visible light. In the present study, polyaniline decorated Pt@TiO₂ for visible light-driven H₂ generation is reported for the first time. The above-mentioned nanocomposite is prepared through a simple oxidative-polymerization and characterized by infrared spectroscopy, transmission electron microscopy, X–ray diffraction, thermogravimetric analysis, and ultraviolet–visible diffuse reflectance spectra. Polyaniline modification improves the absorption of the nanocomposite in visible light region via a photosensitization effect similar to dye–sensitization but does not influence the crystal structure and size of Pt@TiO₂. The polyaniline modified Pt@TiO₂ exhibits a remarkable visible light activity (61.8 μmol h⁻¹ g⁻¹) and good stability for H₂ generation (with an average apparent quantum yield of 10.1%) with thioglycolic acid as an electron donor. This work provides new insights into using conducting polymers, including polyaniline, as a sensitizer to modify Pt@TiO₂ for visible-light hydrogen generation.     

Steam reforming of 1-methylnaphthalene over pure CeO2 under model coke oven gas conditions containing high H2S concentrations

Tar and H₂S are obstacles to the efficient production of H₂ from unused industrial gases and biomass gasification gases. Robust catalysts against tar and H₂S are required to produce H₂ from such resources. Herein, a stable steam reforming reaction is demonstrated over pure CeO₂ under reaction conditions consisting of ~2 vol% 1-methylnaphthalene and ~1000 ppm H₂S. The presence of H₂S significantly suppressed Ni/MgO/Al₂O₃ activity and increased carbon deposition, regardless of the steam to carbon (S/C) ratio. In contrast, the promotion or suppression of CeO₂ activity in the presence of H₂S was dependent on the S/C ratio. At S/C = 1.2, H₂S deactivated the CeO₂ catalyst and increased carbon deposition. Conversely, H₂S promoted the reforming reaction and decreased carbon deposition on CeO₂ at S/C ≥ 2.0. The results of this study clarify that pure CeO₂ exhibits outstanding and stable activity for the steam reforming reaction of 1-methylnaphthalene in the presence of H₂S by controlling the S/C of the inlet gas.     

Dark fermentative biohydrogen production using pretreated Scenedesmus obliquus biomass under an integrated paradigm of biorefinery

In recent times, biohydrogen production from microalgal feedstock has garnered considerable research interests to sustainably replace the fossil fuels. The present work adapted an integrated approach of utilizing deoiled Scenedesmus obliquus biomass as feedstock for biohydrogen production and valorization of dark fermentation (DF) effluent via biomethanation. The microalgae was cultivated under different CO₂ concentration. CO₂-air sparging of 5% v/v supported maximum microalgal growth and carbohydrate production with CO₂ fixation ability of 727.7 mg L^?1 d^?1. Thereafter, lipid present in microalgae was extracted for biodiesel production and the deoiled microalgal biomass (DMB) was subjected to different pretreatment techniques to maximize the carbohydrate recovery and biohydrogen yield. Steam heating (121 °C) in coherence with H₂SO₄ (0.5 N) documented highest carbohydrate recovery of 87.5%. DF of acid-thermal pretreated DMB resulted in maximum H₂ yield of 97.6 mL g^?1 VS which was almost 10 times higher as compared to untreated DMB (9.8 mL g^?1 VS). Subsequent utilization of DF effluent in biomethanation process resulted in cumulative methane production of 1060 mL L^?1. The total substrate energy recovered from integrated biofuel production system was 30%. The present study envisages a microalgal biorefinery to produce biohydrogen via DF coupled with concomitant CO₂ sequestration.     

Improvement of biohydrogen production from brewery wastewater: Evaluation of inocula,support and reactor

This work explores the production of biohydrogen from brewery wastewater using as inoculum a culture produced by natural fermentation of synthetic wastewater and Klebsiella pneumoniae isolated from the environment. Klebsiella pneumoniae showed good performance as inoculum, as evaluated using assays of between 9 and 16 cycles, with durations of 12 and 24 h, carbohydrate concentrations from 2.79 to 7.22 g L⁻¹, and applied volumetric organic loads from 2.6 to 12.6 g carbohydrate L⁻¹ day⁻¹. The best results were achieved with applied volumetric organic loads of 12.6 g carbohydrate L⁻¹ day⁻¹ and cycle length of 12 h, resulting in mean volumetric productivity of 0.88 L H₂ L⁻¹ day⁻¹, maximum molar flow of 10.80 mmol H₂ h⁻¹, and mean yield of 0.70 mol H₂ mol⁻¹ glucose consumed. The biogas H₂ content was between 18 and 42%, while the mean organic compounds removal and carbohydrate conversion efficiencies were 23 and 81%, respectively. The inoculum produced by natural fermentation was not viable.     

Enhancement of bio-hydrogen generation by spirulina via an electrochemical photo-bioreactor (EPBR)

The biological production of hydrogen by microalgae is considered as an advantageous process. However, its yields are sometimes limited. To go beyond this limit, the improvement of the H₂ generation rate by Spirulina was studied via an electrochemical photo-bioreactor (EPBR). This EPBR led to hydrogen evolution rates of up to 27.49 and 13.37 mol of H₂.d⁻¹.m⁻³ for the anode and cathode chambers, respectively, under 0.3 V voltage and ~2.5 mA current. These results represent about a 4-fold increase compared to the H₂ production rate recorded without the application of a voltage. This increase in bio-hydrogen production is correlated with a drop in the concentration of NADPH. The Electrochemical Sequential Batch Reactor (ESRB) provided a more interesting total production rate which was 2.65 m³ m⁻³ d⁻¹, compared to the batch mode, which gave 1.2 m³ m⁻³.d⁻¹. The results show, for the first time, the boosting effect of the voltage on the metabolism of H₂ production by the Spirulina strain.     

A remarkable increase in the adsorbed H2 amount: Influence of pore size distribution on the H2 adsorption capacity of Fe-BTC

Here we show the crucial role of ultramicropores on the adsorbed H₂ amount. By synthesizing Fe-BTCs via a perturbation assisted nanofusion synthesis strategy and by the control of textural porosity via Fe:BTC ratio, BET surface area (1312 m²/g), total pore volume (1.41 cm³/g), and H₂ adsorption capacity (1.10 wt% at 7.6 bar and 298 K) were enhanced by 1.6, 3.1, and 2.6 times, respectively. The reported BET surface area, and the total pore volume are the highest of those reported for Fe-BTC, to date. The enhanced H₂ adsorption capacity of Fe-BTC-3 is attributed to the ultramicropores present in its pore structure. Presence of ultramicropores maximizes van der Waals potential, and the adsorbed H₂ amount increases. By the perturbation assisted nanofusion synthesis strategy and the control over textural porosity, an Fe-BTC that possesses a H₂ adsorption capacity higher than those of reported MOFs with higher BET surface areas has been reported.     

New cyanobacterial strains for biohydrogen production

Under certain conditions, cyanobacteria can switch from photosynthesis to hydrogen production, which is a good energy carrier. However, the biological diversity of hydrogen-releasing cyanobacteria has a great unexplored potential. This study is aimed to investigate the ability of new strains of cyanobacteria Cyanobacterium sp. IPPAS B-1200, Dolichospermum sp. IPPAS B-1213, and Sodalinema gerasimenkoae IPPAS B-353 to release H₂ and to evaluate the effects of photosystem II inhibitor 3-(3,4-dichlorphenyl)-1,1-dimethylurea (DCMU) on H₂ production under light and dark conditions. The results showed that cultures treated with DCMU produced several times more H₂ than untreated cells. The highest rate of H₂ photoproduction of 4.24 μmol H₂ (mg Chl a h)^?1 was found in a Dolichospermum sp. IPPAS B-1213 culture treated with 20 μM DCMU.     

Turning glycerol surplus into renewable syngas through glycerol steam reforming over a sol-gel Ni–Mo2C-Al2O3 catalyst

In this work, a sol-gel Ni–Mo₂C–Al₂O₃ catalyst is employed for the first time in the glycerol steam reforming for syngas production. Catalyst stability and activity are investigated in the temperature range of 550 °C–700 °C and time on stream up to 30 h. As reaction temperature increases, from 550 °C to 700 °C, H₂ yield boosts from 22% to 60%. The stability test, carried out at milder conditions (600 °C and Gas-Hourly Space-Velocity (GHSV) of 50,000 mL h⁻¹.g_cat⁻¹), shows high catalyst stability, up to 30 h, with final conversion, H₂ yield, and H₂/CO ratio of 95%, 53% and 1.95, respectively. Both virgin and spent catalysts have been characterized by a multitude of techniques, e.g., Atomic-Absorption spectroscopy, Raman spectroscopy, N₂-adsorption-desorption, and Transmission Electron Microscopy (TEM), among others. Regarding the spent catalysts, carbon deposits’ morphology becomes more graphitic as the reaction temperature increases, and the total coke formation is mitigated by increasing reaction temperature and lowering GHSV.     

Nickel-doped TiO2 and thiophene-naphthalenediimide copolymer based inorganic/organic nano-heterostructure for the enhanced photoelectrochemical urea oxidation reaction

To overcome the global challenges of energy crises and environmental threats, urea oxidation is a hopeful route to utilize urea-rich wastewater as an energy source for hydrogen production. Herein, we report an inorganic/organic type of nano-heterostructure (NHs–Ni-TiO₂/p-NDIHBT) as a photoanode with excellent urea oxidation efficiency driven by visible light. This heterostructured photoanode consists of nickel (Ni)-doped TiO₂ nanorods (NRs) arrays as an inorganic part and a D-A-D type organic polymer i.e p-NDIHBT as an organic part. The as-prepared photoanode was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The morphological studies of TEM confirm the coating of p-NDIHBT on Ni–TiO₂ NPs (～1 μm). The consequence of heterostructure formation on optical and photoelectrochemical (PEC) properties of photoanode were explored through photoelectrochemical responses under visible light irradiation. The photoelectrochemical activity of Ni–TiO₂ and Ni–TiO₂/p-NDIHBT photoanode from linear sweep voltammetry (LSV) shows the ultrahigh photocurrent density of 0.36 mA/cm² and 2.21 mA/cm², respectively measured at 1.965 V_RHE. Electrochemical impedance spectroscopy (EIS) of both photoanodes shows a highly sensitive nature toward the urea oxidation reaction. The hybrid photoanode also exhibits high photostability, good solar-to-hydrogen conversion efficiency, and high faradaic efficiency for urea oxidation.     

Simultaneous biohydrogen (H2) and bioplastic (poly-β-hydroxybutyrate-PHB) productions under dark,photo, and subsequent dark and photo fermentation utilizing various wastes

The present study is focused on bio hydrogen (H₂) and bioplastic (i.e., poly-β-hydroxybutyrate; PHB) productions utilizing various wastes under dark fermentation, photo fermentation and subsequent dark-photo fermentation. Potential bio H₂ and PHB producing microbes were enriched and isolated. The effects of substrate (rice husk hydrolysate, rice straw hydrolysate, dairy industry wastewater, and rice mill wastewater) concentration (10–100%) and pH (5.5–8.0) were examined in the batch mode under the dark and photo fermentation conditions. Using 100% rice straw hydrolysate at pH 7, the maximum bio H₂ (1.53 ± 0.04 mol H₂/mol glucose) and PHB (9.8 ± 0.14 g/L) were produced under dark fermentation condition by Bacillus cereus. In the subsequent dark-photo fermentation, the highest amounts of bio H₂ and PHB were recorded utilizing 100% rice straw hydrolysate (1.82 ± 0.01 mol H₂/mol glucose and 19.15 ± 0.25 g/L PHB) at a pH of 7.0 using Bacillus cereus (KR809374) and Rhodopseudomonas rutila. The subsequent dark-photo fermentative bio H₂ and PHB productions obtained using renewable biomass (i.e., rice husk hydrolysate and rice straw hydrolysate) can be considered with respect to the sustainable management of global energy sources and environmental issues.     

Hydrogen production from additive-free formic acid over highly active metal organic frameworks-supported palladium-based catalysts

The metal organic frameworks (MOFs) supported Pd catalysts for H₂ generation from formic acid (FA) were synthesized in this work, via a facile excessive impregnation-low temperature reduction approach. Among the synthetic catalysts, 10% Pd/MOF-Cr (18) displayed a remarkable performance for catalyzing FA dehydrogenation in additive-free aqueous solution, and the corresponding TOF_mid achieved 537.8 h^?1 at 323 K. Furthermore, the bimetallic Ni–Pd alloy catalysts were prepared by the introduction of Ni in the subsequent work. Fortunately, 10% Ni_0.4Pd_0.6/MOF-Cr was found to be a highly active and fairly durable catalyst, exhibiting a TOF_mid as high as 737.9 h^?1 at 323 K with almost 100% X_FA (final) and S_H2, and remained 94% of its original activity in the third cyclic catalysis. Meanwhile, Ni was discovered to be indispensable in increasing the electron density of Pd, downsizing the immobilized metal particles and inhibiting the agglomeration of the loaded nanoparticles.     

Molten salt synthesis of high-entropy alloy AlCoCrFeNiV nanoparticles for the catalytic hydrogenation of p-nitrophenol by NaBH4

High-entropy alloy (HEA) AlCoCrFeNiV nanoparticles were prepared from oxide precursors using a molten salt synthesis method without an electrical supply. The oxide precursor was directly reduced by CaH₂ reducing agent in molten LiCl at 600°C-700°C or molten LiCl–CaCl₂ at 500°C-550°C. When the reduction was conducted at 700°C, a face-centered cubic (FCC) structure produced, as identified by X-ray diffraction analysis. With lower reduction temperatures, the FCC structure was absent, replaced by a body-centered cubic (BCC) structure. With a reduction temperature of 550°C, the resulting sample was composed of highly pure HEA AlCoCrFeNiV nanoparticles with a BCC structure of 15 nm. Analyses by scanning electron microscopy/transmission electron microscopy with energy-dispersive X-ray spectroscopy confirmed the formation of homogeneous HEA AlCoCrFeNiV with a nanoscale morphology. In the hydrogenation reaction of p-nitrophenol by NaBH₄, the AlCoCrFeNiV nanoparticles (produced at 550°C) exhibited a catalytic activity with ～90% conversion and 16 kJ/mol activation energy.     

Kinetics of formic acid decomposition in subcritical and supercritical water – a Raman spectroscopic study

The decomposition of formic acid is studied in a continuous sub- or supercritical water reactor at temperatures between 300 and 430 °C, a pressure of 25 MPa, residence times between 4 and 65 s, and a feedstock concentration of 3.6 wt%. In situ Raman spectroscopy is used to produce real-time data and accurately quantify decomposition product yields of H₂, CO₂, and CO. Collected spectra are used to determine global decomposition rates and kinetic rates for individual reaction pathways. First-order global Arrhenius parameters are determined as log A (s⁻¹) = 1.6 ± 0.20 and E_A = 9.5 ± 0.55 kcal/mol for subcritical decomposition, and log A (s⁻¹) = 12.56 ± 1.96 and E_A = 41.90 ± 6.08 kcal/mol for supercritical decomposition. Subcritical and supercritical Arrhenius parameters for individual pathways are proposed. The variance in rate parameters is likely due to changing thermophysical properties of water across the critical point. There is strong evidence for a surface catalyzed free-radical mechanism responsible for rapid decomposition above the critical point, facilitated by low density at supercritical conditions.     

A new side-looking at the dark fermentation of sugarcane vinasse: Improving the carboxylates production in mesophilic EGSB by selection of the hydraulic retention time and substrate concentration

In recent years, a lot of scientific effort has been put into reusing the energy potential of sugarcane vinasse by dark fermentation. However, the findings so far indicate that new pathways need to be followed. In this context, this study assessed the effect of hydraulic retention time (HRT, from 24 to 1 h) on vinasse fermentation (10, 20, and 30 g COD L^?1) in three mesophilic expanded granular sludge bed reactors (EGSB). The carbohydrate conversion remained above 60% at all organic loading rates applied. The maximum hydrogen production rate (8.77 L day^?1 L^?1) was obtained for 720 kg COD m^?3 day^?1 and associated to the lactate-acetate pathway. The highest productivities of propionic, acetic, and butyric acids were 3.11, 1.68, and 2.45 g L^?1 h^?1, respectively, at a HRT of 1 h. At this HRT, the degrees of acidification remained between 54% and 76% in all EGSB reactors. This research provides insights for carboxylate production from sugarcane vinasse and suggests applying the EGSB setup in the acidogenic stage of two-stage processes.     

Facile modified polyol synthesis of FeCo nanoparticles with oxyhydroxide surface layer as efficient oxygen evolution reaction electrocatalysts

The oxygen evolution reaction (OER) at anode requires high overpotential and is still challenging. The metallic core-oxyhydroxide layer structure is an efficient method to lower an overpotential. We synthesized Fe rich FeCo core-Co rich FeCo oxyhydroxide layer with a different particle size of 173 nm, 225 nm, and 387 nm (FeCo 173, 225, 387) through a difference in the reduction rate of Fe/Co precursors using facile modified polyol synthesis. To investigate the effect of conductivity, CoFe₂O₄ nanoparticles of 80–130 nm were synthesized. Among samples, FeCo 173 showed remarkable catalytic performance of 316 mV at a current density of 10 mA/cm² in 0.1 M KOH compared to RuO₂ (408 mV), FeCo 225 (323 mV), FeCo 387 (334 mV), CoFe₂O₄ (382 mV). Moreover, FeCo 173 showed good stability for 60,000 s while RuO₂ showed a gradual increase in overpotential to maintain 10 mA/cm² after 15,000 s in chronopotentiometry. The excellent performance was attributed to Fe-rich metallic core, a small amount of Fe doping into CoOOH, and the synergic effect between the active site of Co rich FeCoOOH and conductive Fe rich metallic core. Following this result, it shows that the use of such FeCo electrodes has advantages in the production of hydrogen via electrochemical water oxidation.     

Wind-powered 250 kW electrolyzer for dynamic hydrogen production: A pilot study

Alkaline water electrolysis is the most promising approach for the industrial production of green hydrogen. This study investigates the dynamic operational characteristics of an industrial-scale alkaline electrolyzer with a rated hydrogen production of 50 m³/h. Strategies for system control and equipment improvement in dynamic-mode alkaline electrolytic hydrogen production are discussed. The electrolyzer can operate over a 30%–100% rated power load, thereby facilitating high-purity (>99.5%) H₂ production, competitive DC energy efficiency (4.01–4.51 kW h/Nm³ H₂, i.e., 73.1%–65.0% LHV), and good gas–liquid fluid balance. A safe H₂ content of 2% in O₂ (50% LFL) can be guaranteed by adjusting the system pressure. In transient operation, the electrolyzer can realize minute-level power and pressure modulation with high accuracy. The results confirm that the proposed alkaline electrolyzer can absorb highly fluctuating energy output from renewables because of its capability to operate in a dynamic mode.