基于价值损耗的燃料电池混合动力能量管理策略评价

为了评价燃料电池混合动力系统能量管理策略的经济性,对基于状态机和模糊逻辑2种能量管理策略的燃料电池混合动力叉车的价值损耗进行分析。首先,通过分析燃料电池和锂电池的工作特性,分别构建依赖实际工况的燃料电池单体电压衰减率模型和锂电池容量衰减率模型;同时定义计及燃料电池氢耗量的燃料电池混合动力系统的综合价值损耗指标。其次,通过测试叉车极限工况,计算燃料电池功率和锂电池容量,并根据母线电压确定锂电池SOC范围。最后,设计基于状态机和模糊逻辑的2种燃料电池混合动力叉车能量管理策略,并通过仿真分析在叉车一次循环工况下2种能量管理的价值损耗。研究结果表明:相较于模糊逻辑策略,采用状态机策略造成燃料电池寿命损耗提高7.81%,氢耗量提高1.89倍,锂电池寿命损耗减小21.33%。     

Real time power management strategy for fuel cell hybrid electric bus based on Lyapunov stability theorem

The fuel cell/battery durability and hybrid system stability are major considerations for the power management of fuel cell hybrid electric bus (FCHEB) operating on complicated driving conditions. In this paper, a real time nonlinear adaptive control (NAC) with stability analyze is formulated for power management of FCHEB. Firstly, the mathematical model of hybrid power system is analyzed, which is established for control-oriented design. Furthermore, the NAC-based strategy with quadratic Lyapunov function is set up to guarantee the stability of closed-loop power system, and the power split between fuel cell and battery is controlled with the durability consideration. Finally, two real-time power management strategies, state machine control (SMC) and fuzzy logic control (FLC), are implemented to evaluate the performance of NAC-based strategy, and the simulation results suggest that the guaranteed stability of NAC-based strategy can efficiently prolong fuel cell/battery lifespan and provide better fuel consumption economy for FCHEB.     

Experimental investigation on the online fuzzy energy management of hybrid fuel cell/battery power system for UAVs

The hybrid powerplant combining a fuel cell and a battery has become one of the most promising alternative power systems for electric unmanned aerial vehicles (UAVs). To enhance the fuel efficiency and battery service life, highly effective and robust online energy management strategies are needed in real applications.In this work, an energy management system is designed to control the hybrid fuel cell and battery power system for electric UAVs. To reduce the weight, only one programmable direct-current to direct-current (dcdc) converter is used as the critical power split component to implement the power management strategy. The output voltage and current of the dcdc is controlled by an independent energy management controller. An executable process of online fuzzy energy management strategy is proposed and established. According to the demand power and battery state of charge, the online fuzzy energy management strategy produces the current command for the dcdc to directly control the output current of the fuel cell and to indirectly control the charge/discharge current of the battery based on the power balance principle.Another two online strategies, the passive control strategy and the state machine strategy, are also employed to compare with the proposed online fuzzy strategy in terms of the battery management and fuel efficiency. To evaluate and compare the feasibility of the online energy management strategies in application, experiments with three types of missions are carried out using the hybrid power system test-bench, which consists of a commercial fuel cell EOS600, a Lipo battery, a programmable dcdc converter, an energy management controller, and an electric load. The experimental investigation shows that the proposed online fuzzy strategy prefers to use the most power from the battery and consumes the least amount of hydrogen fuel compared with the other two online energy management strategies.     

Improved fuzzy logic control-based energy management strategy for hybrid power system of FC/PV/battery/SC on tourist ship

An improved fuzzy-based energy management strategy (EMS) is proposed for a tourist ship used hybrid power system with multiple power sources consisting of fuel cell(FC)/photovoltaic cell(PV)/battery(BAT)/super-capacitor(SC). The power demand from propeller and user terminal is afforded by the power sources connecting to power converters. To obtain more superior performance of the power system, the maximum power point tracking (MPPT) algorithm is employed to optimize the PV. Meanwhile, the improved fuzzy logic control based on dynamic programming (DP) associated with wavelet analysis and PI control are employed to achieve the output power optimal distribution and online control. In particular, the MPPT algorithm can improve the utilization of solar energy, and the SC can well absorb the high frequency power and reduce the fluctuation of the battery and FC that exhibits the potential of their lifetime extension. The FC outputs the high and stable power satisfying the ship's power demand even under the extreme work conditions. The developed model is able to illustrate well in the operation process of the hybrid power system governed by the proposed EMS. In addition, compared with the rule-based strategy, the improved fuzzy-based EMS can reduce 14.39% hydrogen consumption and keep the consistency of battery SOC.     

Development of solid oxide fuel cell and battery hybrid power generation system

Solid oxide fuel cell hybrid generation system is the best scheme for the load tracking of off-grid monitoring stations. But there are still potential problems that need to be addressed: preventing fuel starvation and ensuring thermal safety while meeting load tracking in hybrid power generation system. In order to solve these problems, a feasible hybrid power generation system structure scheme is proposed which combined SOFC subsystem and Li-ion battery subsystem. Then a model of the hybrid power generation system is built based on the proposed system structure. On this basis, an adaptive controller, include the adaptive energy management algorithm and current feedforward gas supply strategy, is applied to manage the power-sharing in this hybrid system as well as keep the system operating within the safety constraints. The constraints, including maintaining the bus voltage at the desired level, keeping SOFC operating temperature in safety, and mitigating fuel starvation are explicitly considered. The stability of the proposed energy management algorithm is analyzed. Finally, the developed control algorithm is applied to the hybrid power generation system model, the operation result proves the feasibility of the designed controller strategy for hybrid generation system and effectively prevent fuel starvation and ensure thermal safety.     

Optimized power management based on adaptive-PMP algorithm for a stationary PEM fuel cell/battery hybrid system

This research develops an efficient and robust polymer electrolyte membrane (PEM) fuel cell/battery hybrid operating system. The entire system possesses its own rapid dynamic response benefited from hybrid connection and power split characteristics due to DC/DC buck-boost converter. An indispensable energy management system (EMS) plays a significant role in achieving optimal fuel economy and in a promising running stability. EMS as an indispensable part plays a significant role in achieving optimal fuel economy and promising operation stability. This study aims to develop an adaptive supervisory EMS that comprises computer-aided engineering tools to monitor, control, and optimize the performance of the hybrid power system. A stationary fuel cell/battery hybrid operating system is optimized using adaptive-Pontryagin's minimum principle (A-PMP). The proposed algorithm depends on the adaptation of the control parameter (i.e., fuel cell output power) from the state of charge (SOC) and load power feedback. The integrated model simulated in a Matlab/Simulink environment includes the fuel cell, battery, DC/DC converter, and power requirements models by analyzing the three different load profiles. Real-time experiments are performed to verify the effectiveness of EMS after analyzing the simulated operating principle and control scheme.     

Optimized rule-based energy management for a polymer electrolyte membrane fuel cell/battery hybrid power system using a genetic algorithm

The polymer electrolyte membrane fuel cell (PEMFC) coupled with the battery is a promising hybrid power system for future energy supply application. Fuel cell durability, battery charge sustenance, and fuel consumption strongly rely on the energy management strategy (EMS). This paper puts forward an optimized rule-based EMS using genetic algorithm (GA) to optimally allocate the power between the fuel cell and the battery system. Control variables in real-time rule-based EMS are optimally adjusted with single objective of battery charge sustenance considering the fuel cell durability and efficiency. The proposed optimized rule-based EMS is simulated and experimentally verified via MATLAB/Simulink and LabVIEW-based experimental rig, respectively. The conventional rule-based EMS, fuzzy logic EMS, and dynamic programming (DP) EMS are also examined for comparison. The comparison results elucidate that the optimized rule-based EMS realizes a large performance improvement over the conventional rule-based and fuzzy logic EMSs. Near optimal performance is verified compared with DP EMS in terms of fuel economy, battery charge sustenance, fuel cell efficiency, and system durability. The combination of rule-based EMS and GA optimization algorithm has the advantage of having expert experience and global optimization properties, realizing optimal power allocation in real-time application with lower computation burden, which could be applied easily to other EMS system without loss of validity.     

Double-layer fuzzy adaptive NMPC coordinated control method of energy management and trajectory tracking for hybrid electric fixed wing UAVs

The energy management and trajectory tracking control are crucial to realize long-endurance autonomous flight for hybrid electric UAVs. This study aims to comprehensively consider energy management and trajectory tracking for hybrid electric fixed wing UAVs with photovoltaic panel/fuel cell/battery. A double-layer fuzzy adaptive nonlinear model predictive control method (DFNMPC) is proposed. Separated by the surplus demand power, energy management and trajectory tracking problem are decoupled into the high-layer fuzzy adaptive nonlinear model predictive controll problem (H-FNMPC) and low-layer fuzzy adaptive nonlinear model predictive controll problem (L-FNMPC). H-FNMPC solves the trajectory tracking and navigation control probelm for the greatest benefit of solar energy. L-FNMPC solves the power allocation problem of hybrid energy system for minimum equivalent hydrogen consumption. A fuzzy adaptive prediction horizon adjustment method based on UAV maneuvering degree is proposed to effectively improve proposed method adaptability to different mission profiles. Analogously, a fuzzy adaptive equivalent hydrogen consumption factor adjustment method in L-FNMPC is proposed to ensure the flexible utilization of battery. In addition, an equivalent hydrogen flow rate calculation method based on the real-time current ratio is proposed for PV/FC/Battery hybrid energy system. Numerical simulation results including a spiral trajectory tracking and a quadrilateral trajectory tracking, demonstrate that DFNMPC can simultaneously handle energy management and trajectory tracking problem for hybrid electric UAVs. Compared to hierarchical fuzzy state machine strategy, DFNMPC can save 13.3% hydrogen for the spiral trajectory tracking, and 56.9% for the quadrilateral trajectory tracking. It indicates that the energy efficiency can be improved from both levels of energy management and flight motion. The proposed method prospected for exploring high-energy-efficiency autonomous flight of hybrid electric UAVs in the future.     

Enhancing the operation of fuel cell-photovoltaic-battery-supercapacitor renewable system through a hybrid energy management strategy

It is necessary to have an energy management system based on one or more control strategies to sense, monitor, and control the behavior of the hybrid energy sources. In renewable hybrid power systems containing fuel cells and batteries, the hydrogen consumption reduction and battery state of charge (SOC) utilizing are the main objectives. These parameters are essential to get the maximum befits of cost reduction as well as battery and hydrogen storage lifetime increasing. In this paper, a novel hybrid energy management system (HEMS) was designed to achieve these objectives. A renewable hybrid power system combines: PV, PEMFC, SC, and Battery was designed to supply a predetermined load with its needed power. This (REHPS) depends on the PV power as a master source during the daylight. It uses the FC to support as a secondary source in the night or shading time. The battery is helping the FC when the load power is high. The supercapacitor (SC) is working at the load transient or load fast change. The proposed energy management system uses fuzzy logic and frequency decoupling and state machine control strategies working together as a hybrid strategy where the switching over between both strategies done automatically based on predetermined values to obtain the minimum value of hydrogen consumption and the maximum value of SOC at the same time. The proposed HEMS achieves 19.6% Hydrogen consumption saving and 5.4% increase in SOC value compared to the results of the same two strategies when working as a stand-alone. The load is designed to show a surplus power when the PV power is at its maximum value. This surplus power is used to charge the battery. To validate the system, the results were compared with the results of each strategy if working separately. The comparison confirms the achievement of the hybrid energy management system goal.     

Two-level energy management strategy for PV-Fuel cell-battery-based DC microgrid

With the fast development of DC Microgrid (MG) technology, its operating economy and reliability are getting more and more concern. The traditional distributed control method is aimed at power balance and system stability, and is difficult to meet the requirement of energy management system for multi-source hybrid DC MG. This paper provides a two-level energy management strategy for PV-fuel cell-battery-based DC MG, which is divided into device control level and system control level. At the device control level, the distributed control methods based on MPPT-droop dual-mode control and droop control are proposed to enhance system reliability; at the system control level, the equivalent consumption minimization strategy (ECMS) is used to distribute system net power between battery pack and fuel cell system. A lab-scale DC microgrid platform is developed to verify the proposed energy management strategy in this paper. Moreover, the analysis and compare of the results show that the proposed two-level energy management strategy can achieve lower equivalent hydrogen consumption than classical PI control and state machine control method.     

Energy management strategy based on fuzzy logic for a fuel cell hybrid bus

Fuel cell vehicles, as a substitute for internal-combustion-engine vehicles, have become a research hotspot for most automobile manufacturers all over the world. Fuel cell systems have disadvantages, such as high cost, slow response and no regenerative energy recovery during braking; hybridization can be a solution to these drawbacks. This paper presents a fuel cell hybrid bus which is equipped with a fuel cell system and two energy storage devices, i.e., a battery and an ultracapacitor. An energy management strategy based on fuzzy logic, which is employed to control the power flow of the vehicular power train, is described. This strategy is capable of determining the desired output power of the fuel cell system, battery and ultracapacitor according to the propulsion power and recuperated braking power. Some tests to verify the strategy were developed, and the results of the tests show the effectiveness of the proposed energy management strategy and the good performance of the fuel cell hybrid bus.     

Variable structure battery-based fuel cell hybrid power system and its incremental fuzzy logic energy management strategy

A hybrid power system consists of a fuel cell and an energy storage device like a battery and/or a supercapacitor possessing high energy and power density that beneficially drives electric vehicle motor. The structures of the fuel cell-based power system are complicated and costly, and in energy management strategies (EMSs), the fuel cell's characteristics are usually neglected. In this study, a variable structure battery (VSB) scheme is proposed to enhance the hybrid power system, and an incremental fuzzy logic method is developed by considering the efficiency and power change rate of fuel cell to balance the power system load. The principle of VSB is firstly introduced and validated by discharge and charge experiments. Subsequently, parameters matching of the fuel cell hybrid power system according to the proposed VSB are designed and modeled. To protect the fuel cell as well as ensure the efficiency, a fuzzy logic EMS is formulated via setting the fuel cell operating in a high efficiency and generating an incremental power output within the affordable power slope. The comparison between a traditional deterministic rules-based EMS and the designed fuzzy logic was implemented by numerical simulation in three different operation conditions: NEDC, UDDS, and user-defined driving cycle. The results indicated that the incremental fuzzy logic EMS smoothed the fuel cell power and kept the high efficiency. The proposed VSB and incremental fuzzy logic EMS may have a potential application in fuel cell vehicles.     

Prediction-based optimal power management in a fuel cell/battery plug-in hybrid vehicle

A prediction-based power management strategy is proposed for fuel cell/battery plug-in hybrid vehicles with the goal of improving overall system operating efficiency. The main feature of the proposed strategy is that, if the total amount of energy required to complete a particular drive cycle can be reliably predicted, then the energy stored in the onboard electrical storage system can be depleted in an optimal manner that permits the fuel cell to operate in its most efficient regime. The strategy has been implemented in a vehicle power-train simulator called LFM which was developed in MATLAB/SIMULINK software and its effectiveness was evaluated by comparing it with a conventional control strategy. The proposed strategy is shown to provide significant improvement in average fuel cell system efficiency while reducing hydrogen consumption. It has been demonstrated with the LFM simulation that the prediction-based power management strategy can maintain a stable power request to the fuel cell thereby improving fuel cell durability, and that the battery is depleted to the desired state-of-charge at the end of the drive cycle. A sensitivity analysis has also been conducted to study the effects of inaccurate predictions of the remaining portion of the drive cycle on hydrogen consumption and the final battery state-of-charge. Finally, the advantages of the proposed control strategy over the conventional strategy have been validated through implementation in the University of Delaware's fuel cell hybrid bus with operational data acquired from onboard sensors.     

Power management strategy for vehicular-applied hybrid fuel cell/battery power system

In this paper, a control strategy for a hybrid PEM (proton exchange membrane) fuel cell/BES (battery energy system) vehicular power system is presented. The strategy, based on fuzzy logic control, incorporates the slow dynamics of fuel cells and the state of charge (SOC) of the BES. Fuel cell output power was determined according to the driving load requirement and the SOC, using fuzzy dynamic decision-making and fuzzy self-organizing concepts. An analysis of the simulation results was conducted using Matlab/Simulink/Stateflow software in order to verify the effectiveness of the proposed control strategy. It was confirmed that the control scheme can be used to improve the operational efficiency of the hybrid power system.     

Fuzzy neural control of a hybrid fuel cell/battery distributed power generation system

An innovative control strategy is proposed of hybrid distributed generation (HDG) systems, including solid oxide fuel cell (SOFC) as the main energy source and battery energy storage as the auxiliary power source. The overall configuration of the HDG system is given, and dynamic models for the SOFC power plant, battery bank and its power electronic interfacing are briefly described, and controller design methodologies for the power conditioning units and fuel cell to control the power flow from the hybrid power plant to the utility grid are presented. To distribute the power between power sources, the fuzzy switching controller has been developed. Then, a Lyapunov based-neuro fuzzy algorithm is presented for designing the controllers of fuel cell power plant, DC/DC and DC/AC converters; to regulate the input fuel flow and meet a desirable output power demand. Simulation results are given to show the overall system performance including load-following and power management of the system.     

Implementation of self-adaptive Harris Hawks Optimization-based energy management scheme of fuel cell-based electric power system

This paper presents a hybrid Fuel Cell-based Power System (FCPS) consisting of fuel cell and hybrid Energy Storage Systems (ESSs), including a battery with high energy density and supercapacitor with high power density to overcome the sudden load demand change and improving the reliability of the delivered power. Any hybrid power system needs Energy Management Strategies (EMS) to balance the power between the different energy sources. In this paper, a comparative analysis of three energy management strategies, including the state machine control method, the classical PI control method and equivalent consumption minimization strategy (ECMS) is performed. The paper's main objective is enhancing the DC-bus voltage profile of a hybrid fuel cell/battery/supercapacitor power system equipped with the developed under-mentioned EMS by using a hybrid modified optimization technique that combines Harris Hawks optimization (HHO) and Sine Cosine Algorithm (SCA). The new hybrid HHO-SCA is employed to determine the optimal control parameters of the DC-bus voltage controller, which significantly assists in enhancing the DC-bus voltage profile as well as the performance of the applicable ESS in terms of improving efficiency and SoC. The effectiveness of the suggested control schemes is simulated using MATLAB/SIMULINK software. The simulation results confirmed that the proposed HHO-SCA is superior and efficient in improving the DC-bus voltage.     

A comparison of rule-based and model predictive controller-based power management strategies for fuel cell/battery hybrid vehicles considering degradation

Traditional power management systems for hybrid vehicles often focus on the optimization of one particular cost factor, such as fuel consumption, under specific driving scenarios. The cost factor is usually based on the beginning-of-life performance of system components. Typically, such strategies do not account for the degradation of the different components of the system over their lifetimes. This study incorporates the effect of fuel cell and battery degradation within their cost factors and investigates the impact of different power management strategies on fuel cell/battery loads and thus on the operating cost over the vehicle's lifetime. A simple rule-based power management system was compared with a model predictive controller (MPC) based system under a connected vehicle scenario (where the future vehicle speed is known a priori within a short time horizon). The combined cost factor consists of hydrogen consumption and the degradation of both the fuel cell stack and the battery. The results show that the rule-based power management system actually performs better and achieves lower lifetime cost compared to the MPC system even though the latter contains more information about the drive cycle. This result is explained by examining the changing dynamics of the three cost factors over the vehicle's lifetime. These findings reveal that a limited knowledge of traffic information might not be as useful for the power management of certain fuel cell/battery hybrid vehicles when degradation is taken into consideration, and a simple tuned rule-based controller is adequate to minimize the lifetime cost.     

Robust energy management strategy based on non-linear cascade control of fuel cells-super capacitors hybrid power system

The use of super capacitors as secondary sources in fuel cell power systems with adequate energy management strategy strongly contributes to increasing the lifespan of fuel cells by protecting them against sudden variations of the load current and improves the efficiency and the dynamics of the hybrid power system, thus obtained. This paper presents an innovative management strategy of fuel cells-super capacitors hybrid power system, based on a nonlinear control using an integral hysteresis sliding mode controller combined with two cascaded linear controllers. The hybrid power system consists of the fuel cells system, the super capacitors, two power converters, the energy management system and the load. The proposed technique takes into account the physical operating limits of the secondary source such as deep discharges and excessive overloads. Furthermore, the integral effect added to the hysteresis sliding mode controller improves the robustness against disturbances and variations in parameters such as filtering inductances and DC bus capacitors. A detailed model of the system is established and simulated in Matlab/Simulink software, which allows showing its behavior with a very satisfactory accuracy. The simulation results clearly show that the proposed control strategy insures efficient and safe energy transfer. In addition, the control robustness is very satisfactory despite the variation of the system parameters.     

Comparative study of energy management systems for a hybrid fuel cell electric vehicle - A novel mutative fuzzy logic controller to prolong fuel cell lifetime

Hybrid fuel cell battery electric vehicles require complex energy management systems (EMS) in order to operate effectively. Poor EMS can result in a hybrid system that has low efficiency and a high rate of degradation of the fuel cell and battery pack. Many different types of EMS have been reported in the literature, such as equivalent consumption minimisation strategy and fuzzy logic controllers, which typically focus on a single objective optimisations, such as minimisation of H₂ usage. Different vehicle and system specifications make the comparison of EMSs difficult and can often lead to misleading claims about system performance. This paper aims to compare different EMSs, against a range of performance metrics such as charge sustaining ability and fuel cell degradation, using a common modelling framework developed in MATLAB/Simulink - the Electric Vehicle Simulation tool-Kit (EV-SimKit). A novel fuzzy logic controller is also presented which mutates the output membership function depending on fuel cell degradation to prolong fuel cell lifetime – the Mutative Fuzzy Logic Controller (MFLC). It was found that while certain EMSs may perform well at reducing H₂ consumption, this may have a significant impact on fuel cell degradation, dramatically reducing the fuel cell lifetime. How the behaviour of common EMS results in fuel cell degradation is also explored. Finally, by mutating the fuzzy logic membership functions, the MFLC was predicted to extend fuel cell lifetime by up to 32.8%.     

Control of a fuel cell based on the SIRMs fuzzy inference model

A typical working mode for the fuel cell hybrid system is that the fuel cell produces constant power output while the auxiliary storage energy device such as ultracapacitor or battery provides the deviation between the desired power demand and the value of the actual operation. This paper concentrates on the control of the fuel cell flow system. The system which is like an under-actuated mechanical system needs to control two objects (the cathode pressure and the air flow) with one manipulated variable (the set voltage of the air mass flow controller). A SIRMs-based fuzzy inference model is successfully implemented in the system. Online random search optimization algorithm based on Simulink C-S functions is developed to adjust the parameters in the model. By alternative control of the two objects, experimental results demonstrate the realization of the control strategy with one adjustment means.