水循环式热泵干燥装置的分析

热泵干燥装置具有节约能源、环境友好、可低温干燥等特点。水循环式热泵干燥装置是指热泵和干燥部分通过水循环耦合而成的热泵干燥装置,与热泵和干燥部分直接耦合相比,具有不向环境排放热量、机组调控性好、对干燥过程的匹配性好、成本低等优势,是一种较适宜于中小型热泵干燥装置的结构型式。     

Performance of ejector heat pumps

An ejector-compression heat pump can use low-grade thermal energy in the neighbourhood of 93.3°C (200°F) to provide space cooling and heating. This paper applies the existing ejector theory to estimate the performance of an ejector heat pump system at various operating conditions. The study includes parametric, sensitivity and off-design analyses of the heat pump performance. The performance enhancement options and desired ejector geometry are also examined. Refrigerants 11, 113 and 114 are three of the halocarbons most suitable for the ejector heat pump system. The estimated coefficients of performance for a simple ejector heat pump are 0.3 for the cooling mode and 1.3 for the heating mode at a sample operating condition in which the refrigerant (R-11) boiling temperature is 93.3°C (200°F), condensing temperature 43.3°C (110°F) and evaporating temperature 10°C (50°F). A 24 per cent performance improvement is predicted for a heat pump with two-stage ejectors and regenerative heat exchangers. The off-design performance is relatively insensitive to the evaporator temperature variations.     

地下水水源热泵的水源问题研究

地下水是应用地下水水源热泵的前提。文章简单阐述了地下水温度、流量和水质对水源热泵运行效率的影响。介绍了水处理技术和回灌技术，探讨了工程中应注意“热短路”问题。     

热泵干燥装置的技术经济及环境分析

热泵干燥具有节能、低温干燥及环境友好等优点,但与普通干燥装置相比,有初投资大等不足。本文以中小型热泵干燥装置为背景,对热泵干燥装置与普通干燥装置在采用电能、煤、天然气为能源时的技术、经济、环境特性进行了对比分析,为热泵干燥装置的应用提供了直接的参考。     

Exergoeconomic performance of an endoreversible Carnot heat pump with complex heat transfer law

The finite-time exergoeconomic performance of an endoreversible Carnot heat pump with a complex heat transfer law, including generalized convective heat transfer law and generalized radiative heat transfer law q∝ (Δ T ⁿ ) ^m , is investigated in this paper. The focus of this paper is to obtain the compromised optimization between economics (profit) and the energy utilization factor (coefficient of performance, COP) for the endoreversible Carnot heat pump, by searching the optimum COP at maximum profit, which is termed as the finite-time exergoeconomic performance bound. The obtained results include those obtained in much of the literature and can provide some theoretical guidance for the design of practical heat pumps.     

Advances in heat pump systems: A review

Heat pump systems offer economical alternatives of recovering heat from different sources for use in various industrial, commercial and residential applications. As the cost of energy continues to rise, it becomes imperative to save energy and improve overall energy efficiency. In this light, the heat pump becomes a key component in an energy recovery system with great potential for energy saving. Improving heat pump performance, reliability, and its environmental impact has been an ongoing concern. Recent progresses in heat pump systems have centred upon advanced cycle designs for both heat- and work-actuated systems, improved cycle components (including choice of working fluid), and exploiting utilisation in a wider range of applications. For the heat pump to be an economical proposition, continuous efforts need to be devoted to improving its performance and reliability while discovering novel applications. Some recent research efforts have markedly improved the energy efficiency of heat pump. For example, the incorporation of a heat-driven ejector to the heat pump has improved system efficiency by more than 20%. Additionally, the development of better compressor technology has the potential to reduce energy consumption of heat pump systems by as much as 80%. The evolution of new hybrid systems has also enabled the heat pump to perform efficiently with wider applications. For example, incorporating a desiccant to a heat pump cycle allowed better humidity and temperature controls with achievable COP as high as 6. This review paper provides an update on recent developments in heat pump systems, and is intended to be a “one-stop” archive of known practical heat pump solutions. The paper, broadly divided into three main sections, begins with a review of the various methods of enhancing the performance of heat pumps. This is followed by a review of the major hybrid heat pump systems suitable for application with various heat sources. Lastly, the paper presents novel applications of heat pump systems used in select industries.     

Metal hydride heat pumps

Heat pumps have been known for a long time, but, until the energy crisis of 1973, there were only a few studies covering them. Since that time, in addition to alternative energy sources, scientists and engineers have started studying heat pumps more earnestly. There are several kinds of heat pump and utilizations of them, but the most common one is the vapour-compression heat pump. In recent years researchers have started to study metal hydride heat pumps. The paper considers the metal hydride bed, its thermodynamics, and its utilization as a heat pump. It is also compared with conventional heat pumps. The results indicate that the metal hydride heat pump has several advantages, and its utilization in the industrial, commercial and residential fields is foreseen.     

Extremum seeking control for efficient operation of hybrid ground source heat pump system

The Hybrid Ground Source Heat Pump (GSHP) systems combine the renewable geothermal energy and cooling tower for rejecting the cooling load, which is often adopted for high cooling demand. Model based control can be limited due to variations in ambient conditions, ground-loop heat exchanger (GHE) and equipment characteristics, cost and reliability of sensors. A self-optimizing control scheme is proposed for efficient operation of the hybrid GSHP based on Extremum Seeking Control (ESC), with feedback of the total power consumption and the control inputs of the relative flow rate of cooling tower and the water pump speed. The cooling capacity of the heat pump regulates the evaporator leaving water at 7 °C. A Modelica based dynamic simulation model is developed for a Hybrid GSHP system, with the vertical GHE model adopted from Modelica Buildings Library. The transient heat transfer is implemented with a finite volume method inside and outside the borehole. The proposed ESC scheme is evaluated under the scenarios of fixed cooling load, ramp change in the evaporator inlet water temperature, diurnal sinusoidal cycle of air wet-bulb temperature, and realistic ambient and cooling load condition. Simulation results show the proposed ESC strategy effectively achieves nearly optimal efficiency without the need for plant model.     

变频系统在单、双级组合式热泵空调系统中的应用

本文根据我国北方的地域特点,提出了一种单、双级定频-变频组合式混合热泵系统。这种热泵 在单、双级混合热泵系统的基础上,引入了变频系统,使之既能在夏季满足制冷要求,又能在冬季热泵采 暖中,在外界环境温度变化范围大的情况下高效节能地运行,同时还可提高系统的部分负荷性能,从而 提高了整个系统的能效比EER,增大了热泵的季节性能系数HSPF,是一种既节能又满足舒适性要求的 热泵系统。     

A two-region simulation model of vertical U-tube ground heat exchanger and its experimental verification

Heat transfer around vertical ground heat exchanger (GHE) is a common problem for the design and simulation of ground coupled heat pump (GCHP). In this paper, an updated two-region vertical U-tube GHE analytical model, which is fit for system dynamic simulation of GCHP, is proposed and developed. It divides the heat transfer region of GHE into two parts at the boundary of borehole wall, and the two regions are coupled by the temperature of borehole wall. Both steady and transient heat transfer method are used to analyze the heat transfer process inside and outside borehole, respectively. The transient borehole wall temperature is calculated for the soil region outside borehole by use of a variable heat flux cylindrical source model. As for the region inside borehole, considering the variation of fluid temperature along the borehole length and the heat interference between two adjacent legs of U-tube, a quasi-three dimensional steady-state heat transfer analytical model for the borehole is developed based on the element energy conservation. The implement process of the model used in the dynamic simulation of GCHPs is illuminated in detail and the application calculation example for it is also presented. The experimental validation on the model is performed in a solar-geothermal multifunctional heat pump experiment system with two vertical boreholes and each with a 30 m vertical 1 1/4 in nominal diameter HDPE single U-tube GHE, the results indicate that the calculated fluid outlet temperatures of GHE by the model are agreed well with the corresponding test data and the guess relative error is less than 6%.     

热泵干燥系统运行特性的有效能研究

热泵干燥能源消耗少，环境污染小，干燥品质高，适用范围广，是一种性能优良的种子干燥机械。从热力学第一、第二定律两方面分析了热泵干燥系统的节能优势所在，得出采用辅助冷凝器是闭式热泵干燥系统的理想方式；而且热泵干燥系统存在一个最佳的蒸发温度，可使系统除湿率和效率最大。     

Performance of a solar air composite heat source heat pump system

For the shortcoming of air source heat pump in heating condition, a composite heat exchanger was designed which integrates fin tube and tube heat exchanger, and it can achieve synchronous and composite heat exchange in one heat exchanger between working fluids, gaseous and liquid heat source. With the above composite heat exchanger as the core component, the Solar Air Composite Heat Source Heat Pump System (SACHP) was developed which has three working modes, including single solar heat source mode, single air heat source mode and solar air dual heat sources mode. A SACHP experiment table was established and conducted a comprehensive experimental study of three working modes of this system in the standard enthalpy difference laboratory. The results show that when the ambient temperature was −15 °C, compared to the single air heat source mode, the dual heat source mode increased 62% in heat capacity and 59% in COP; when the temperature difference of combined heat transfer was 5 °C, compared to the single air heat source mode, the dual heat source mode increased 51% in heat capacity and 49% in COP. Experimental results demonstrate that the application of the solar air composite heat pump technology can accelerate the application process of the solar heat pump in air conditioners for buildings.     

Lithium bromide high-temperature absorption heat pump: Coefficient of performance and exergetic efficiency

A theoretical study on the employment of a lithium bromide absorption heat pump in Spain, used as machine type I and aimed to produce heat at 120°C via waste heat sources at 60°C, is given in the paper. Real performance conditions are stated for each component of the machine, namely the absorber, the heat recoverer, the generator, the condenser, the solution pump, the expansion valve and the evaporator. By means of thermodynamic diagrams (p, t, x) and (h, x), the required data are obtained for calculation of the heat recovered in the evaporator Q_e, and the heat delivered to the absorber Q_a and to the condenser Q_c, as well as the heat supplied to the generator Q_g. In addition, the heat delivered by the hot solution to the cold solution in the heat recovered Q_r, and the work W_p done by the solution pump are calculated. The probable COP is calculated, and values are obtained close to 1.4. The working temperature in the generator is determined; it ranges from 178 to 200°C. The heat produced by the lithium bromide absorption heat pump is 22% cheaper than the heat obtained from a cogeneration system comprising natural gas internal combustion engine and a high temperature heat pump with mechanical compression. Compared with a high temperature heat pump with mechanical compression, the heat produced by the absorption heat pump is 31% cheaper. From (h, x) and (s, x) diagrams, exergy losses for each component can be determined, and, from these results, an exergetic efficiency of 75% is obtained, which provides the quality index of absorption cycle.     

Thermal performance of a packed bed reactor for a high‐temperature chemical heat pump

The thermal performance of a chemical heat pump that uses the reaction system of calcium oxide/lead oxide/carbon dioxide, which is developed for utilization of high‐temperature heat above 800°C, is studied experimentally. The thermal performance of a packed‐bed reactor of a calcium oxide/carbon dioxide reaction system, which stores and transforms a high‐temperature heat source in the heat pump operation, is examined under various heat pump operation conditions. The energy analysis based on the experiment shows that it is possible to utilize high‐temperature heat with this heat pump. This heat pump can store heat above 850°C and then transform it into a heat above 900°C under an approximate atmospheric pressure. An applied system that combines the heat pump and a high‐temperature process is proposed for high‐efficiency heat utilization. The scale of the heat pump in the combined system is estimated from the experimental results. Copyright © 2001 John Wiley & Sons, Ltd.     

Thermodynamic analysis of novel heat pump cycles for drying process with large temperature lift

Heat pump–assisted drying has been recognized a prospective technology to meet the requirement of energy saving. However, large temperature lift will be resulted by the single‐stage heat pump cycle during the high‐temperature drying, especially operating with low ambient temperature for open‐loop drying, which leads to insufficient heat output, high compression ratio, and low coefficient of performance (COP). Two heat pump cycles, namely, multitemperature cascade cycle and combined single‐stage cycle, are proposed to address the above problems in the drying process with large temperature lift in this paper. The effects of varying operation parameters on the heat pump cycles are analyzed to optimize the cycle performance. Afterwards, the above two cycles as well as a conventional cascade cycle, a two‐stage compression cycle, and a single‐stage compression cycle are compared with each other in terms of cycle performance and drying performance under specified drying conditions. It is indicated by the results that the COPs of the multitemperature cascade cycle and combined single‐stage cycle are about 95% and 88% higher than that of the single‐stage compression cycle, respectively. As for the two cascade cycles (ie, conventional cascade cycle and multitemperature cascade cycle), 49% more water evaporation with the same power input can be resulted by the added condenser and evaporator. Among the five analyzed cycles, the multitemperature cascade cycle is the most promising to be used in the retrofitting of the drying equipment with large temperature lift.     

Exergetic performance evaluation of heat pump systems having various heat sources

In this study heat pump systems having different heat sources were investigated experimentally. Solar‐assisted heat pump (SAHP), ground source heat pump (GSHP) and air source heat pump (ASHP) systems for domestic heating were tested. Additionally, their combination systems, such as solar‐assisted‐ground source heat pump (SAGSHP), solar‐assisted‐air source heat pump (SAASHP) and ground–air source heat pump (GSASHP) were tested. All the heat pump systems were designed and constructed in a test room with 60 m² floor area in Firat University, Elazig (38.41°N, 39.14°E), Turkey. In evaluating the efficiency of heat pump systems, the most commonly used measure is the energy or the first law efficiency, which is modified to a coefficient of performance for heat pump systems. However, for indicating the possibilities for thermodynamic improvement, inadequate energy analysis and exergy analysis are needed. This study presents an exergetic evaluation of SAHP, GSHP and ASHP and their combination systems. The exergy losses in each of the components of the heat pump systems are determined for average values of experimentally measured parameters. Exergy efficiency in each of the components of the heat pump systems is also determined to assess their performances. The coefficient of performance (COP) of the SAHP, GSHP and ASHP were obtained as 2.95, 2.44 and 2.33, whereas the exergy losses of the refrigerant subsystems were found to be 1.342, 1.705 and 1.942 kW, respectively. The COP of SAGSHP, SAASHP and GSASHP as multiple source heat pump systems were also determined to be 3.36, 2.90 and 2.14, whereas the exergy losses of the refrigerant subsystems were approximately 2.13, 2.996 and 3.113 kW, respectively. In addition, multiple source heat pump systems were compared with single source heat pump systems on the basis of the COP. Exergetic performance coefficient (EPC) is introduced and is applied to the heat pump systems having various heat sources. The results imply that the functional forms of the EPC and first law efficiency are different. Results show that Ex_loss,total becomes a minimum value when EPC has a maximum value. Copyright © 2008 John Wiley & Sons, Ltd.     

An investigation of the heat pump performance and ground temperature of a piled foundation heat exchanger system for a residential building

Novel methods are sought to provide greater efficiency of the installation of ground heat exchangers for GSHPs (ground source heat pumps) in domestic buildings. An economically viable option is to utilise concrete foundation piles as ground heat exchangers. The objective of this study is to investigate the operation of utilising a piled foundation structure as a ground heat exchanger. A test plot of 72 m² (ground floor area) was produced with 21 × 10 m deep concrete piles, with a single U tube pipe in each. Ground heat was extracted by a heat pump with the heat loading being varied in line with the date and the average air temperature. Over the 2007/2008 heating season this study had investigated the temperature changes in the foundation piles and the surrounding ground in addition to the heat pump operational performance. The temperature changes observed in the region of the test plot were compared with variations naturally experienced in the ground due to the seasonal climatic influence. The SPF (seasonal performance factor) of the heat pump was 3.62 and the ground temperature at a distance of 5 m from the test plot was seen to be undisturbed by the heat extraction and followed the predicted seasonal variation.     

变工况下热泵供热及膨胀机供热的热力性能对比分析

通过对各设备进行建模,以某300 MW热电联产机组为例,对热泵供热及利用小型膨胀机发电后排汽供热两种方案进行变工况分析。结果表明,对于热泵供热方案,在不同的主蒸汽流量下,都存在一个最佳出口热网水温,使系统煤耗最低;采用热泵最佳参数与膨胀机方案进行变工况对比,发现在采暖抽汽参数较低时,热泵方案的煤耗高于膨胀机方案,随着采暖抽汽参数的增大,当热泵出口最佳热网水温超过70℃时,热泵方案的煤耗开始低于膨胀机方案;同样,在采暖抽汽参数较低时,热泵供热效率比膨胀机方案低,当热泵出口最佳热网水温超过64℃时,热泵方案供热效率开始超过膨胀机方案;提出等效节能量指标,并通过计算表明该指标可用于对比两方案的节能效益。     

Model of a total momentum filtered energy selective electron heat pump affected by heat leakage and its performance characteristics

A total momentum filtered energy selective electron (ESE) heat pump model with heat leakage is established in this paper. The analytical expressions of heating load and coefficient of performance (COP) for both the total momentum filtered (k_r-filtered) ESE heat pump and the conventionally filtered (k_x-filtered) ESE heat pump in which the electrons are transmitted according to the momentum in the direction of transport only are derived, respectively. The optimal performance of the k_r-filtered ESE heat pump is analyzed by using the theory of finite time thermodynamics (FTT). The optimal regions of COP and heating load for the k_r-filtered heat pump are obtained. By comparing the performance of the k_r-filtered device with that of the k_x-filtered device, it is found that the heating load performance and the COP versus heating load characteristic curves of the k_r-filtered heat pump are totally different from those of the k_x-filtered device; and the maximum COP and maximum heating load of the k_r-filtered device are generally higher than those of the k_x-filtered device. The influences of heat leakage, resonance width, hot reservoir temperature and chemical potential on the performance of the total momentum filtered ESE heat pump are further analyzed by numerical calculations. The obtained results can provide some theoretical guidelines for the design of practical electron systems such as solid-state thermionic heat pump devices.     

Experimental study of vertical ground-source heat pump performance evaluation for cold climate in Turkey

Heat pump systems are recognized to be outstanding heating, cooling and water heating systems. They provide high levels of comfort as well as offering significant reductions in electrical energy use. In addition, they have very low levels of maintenance requirements and are environmentally attractive. The purpose of this study is to evaluate the experimentally performance and energy analysis of vertical ground-source heat pump (GSHP) for winter climatic condition of Erzurum, Turkey. For this aim, an experimental analysis was performed on GSHP system made up in the Energy Laboratory in the campus of Ataturk University. The experimental apparatus consisted of a ground heat exchanger, the depth of which was 53 m, a liquid-to-liquid vapor compression heat pump, water circulating pumps and other measurement and control equipments. Tests were performed under laboratory conditions for space heating, in which experimental results were obtained during January–May within the heating season of 2007. The experimentally obtained results were used to calculate the heat pump coefficient of performance (COP) and the system performance (COPs). The COP and COPs were found to be in the range of 2.43–3.55 and 2.07–3.04, respectively. This study also shows that the system proposed could be used for residential heating in the province of Erzurum which is one of the coldest climate region of Turkey.