New dielectric material system of La(Mg1/2Ti1/2)O3–Ca0.6La0.8/3TiO3 for microwave applications

The microstructure and microwave dielectric properties of xLa(Mg_1/2Ti_1/2)O₃–(1 − x)Ca_0.6La_0.8/3TiO₃ ceramics system with ZnO additions (0.5 wt.%) investigated by the conventional solid-state route have been studied. Doping with ZnO (0.5 wt.%) can effectively promote the densification and the dielectric properties of xLa(Mg_1/2Ti_1/2)O₃–(1 − x)Ca_0.6La_0.8/3TiO₃ ceramics. 0.6La(Mg_1/2Ti_1/2)O₃–0.4Ca_0.6La_0.8/3TiO₃ ceramics with 0.5 wt.% ZnO addition possess a dielectric constant (_r) of 43.6, a Q × f value of 48,000 (at 8 GHz) and a temperature coefficient of resonant frequency (τ_f) of −1 ppm/°C sintering at 1475 °C. As the content of La(Mg_1/2Ti_1/2)O₃ increases, the highest Q × f value of 62,900 (GHz) for x = 0.8 is achieved at the sintering temperature 1475 °C. A parallel-coupled line band-pass filter is designed and simulated using the proposed dielectric to study its performance.     

X-ray diffraction study of Ba0.985Na0.015Ti0.985Nb0.015O3, Ba0.6Na0.4Ti0.6Nb0.4O3 and Ba0.3Na0.7Ti0.3Nb0.7O3 compositions

The Ba_0.985Na_0.015Ti_0.985Nb_0.015O₃, Ba_0.6Na_0.4Ti_0.6Nb_0.4O₃ and Ba_0.3Na_0.7Ti_0.3Nb_0.7O₃ compositions of the (1 − x) BaTiO₃–xNaNbO₃ (BTNNx) system have been studied by X-ray diffraction and by measurements of dielectric properties. The specimens with composition BTNN (x = 0.015, 0.40 and 0.70) have been refined by the JANA program from X-ray powder diffraction data. Ceramic samples with composition (1 − x) BaTiO₃ + xNaNbO₃ (where x = 0.015, 0.40 and 0.70) were prepared by calcinations from appropriate mixture of BaCO₃, TiO₂, Na₂CO₃ and Nb₂O₅. The calcined powder was sintered at temperature range 1200–1400 °C. As the composition x increased from 0.015 (and 0.70), the ferroelectric ceramics (x = 0.015, FE) with tetragonal phase changed to the ferroelectric relaxors (RFE, x = 0.40). RFE ceramics showed a peculiar diffuse phase transition and dielectric relaxation at the low temperature (down to 180 K) due to a frustration between RFE and FE state. These ceramics present the classical ferroelectric character when 0 ≤ x < 0.075 and 0.55 < x ≤ 1 and relaxor character when 0.075 ≤ x ≤ 0.55.     

Investigation of the microwave dielectric properties of Ca1−xMgxLa4Ti5O17 ceramics for application in coplanar patch antenna

In this paper, the dielectric properties of Ca_1−xMg_xLa₄Ti₅O₁₇ ceramics at microwave frequency have been studied. The diffraction peaks of Ca_(1−x)Mg_xLa₄Ti₅O₁₇ ceramics nearly unchanged with x increasing from 0 to 0.03. Similar X-ray diffraction peaks of Ca_0.99Mg_0.01La₄Ti₅O₁₇ ceramic were observed at different sintering temperatures. A maximum density of 5.3 g/cm³ can be obtained for Ca_0.99Mg_0.01La₄Ti₅O₁₇ ceramic sintered at 1500 °C for 4 h. A maximum dielectric constant (_r) and quality factor (Q × f) of Ca_0.99Mg_0.01La₄Ti₅O₁₇ ceramic sintered at 1500 °C for 4 h are 56.3 and 12,300 GHz (at 6.4 GHz), respectively. A near-zero temperature coefficient of resonant frequency (τ_f) of −9.6 ppm/°C can be obtained for Ca_0.99Mg_0.01La₄Ti₅O₁₇ ceramic sintered at 1500 °C for 4 h. The measurement results for the aperture-coupled coplanar patch antenna at 2.5 GHz are presented. With this technique, a 3.33% bandwidth (return loss <−10 dB) with a center frequency at approximately 2.5 GHz has been successfully achieved.     

Study of (1 − x)(Mg0.6Zn0.4)0.95Co0.05TiO3–xCa0.61Nd0.26TiO3 microwave dielectrics

The microwave dielectric properties and the microstructures of the (1 − x)(Mg_0.6Zn_0.4)_0.95Co_0.05TiO₃–xCa_0.61Nd_0.26TiO₃ ceramic system were investigated. In order to achieve a temperature-stable material, we studied a method of combining a positive temperature coefficient material with a negative one. Ca_0.61Nd_0.26TiO₃ has a large positive temperature coefficient of resonant frequency. (Mg_0.6Zn_0.4)_0.95Co_0.05TiO₃ possesses a negative temperature coefficient of resonant frequency. By appropriately adjusting the x value in the (1 − x)(Mg_0.6Zn_0.4)_0.95Co_0.05TiO₃–xCa_0.61Nd_0.26TiO₃ ceramic system, a near-zero τ_f value can be obtained. A new microwave dielectric material of 0.8(Mg_0.6Zn_0.4)_0.95Co_0.05TiO₃–0.2Ca_0.61Nd_0.26TiO₃ possesses the excellent dielectric properties of a dielectric constant of 28.6, a Q × f value of 80,600 GHz and a temperature coefficient of resonant frequency of 4.1 ppm/°C and has a lower sintering temperature of 1250 °C.     

Formation and properties of BaxFe3−xO4 with spinel structure by mechanochemical reaction of α-Fe2O3 and BaCO3

Magnetic Ba_xFe_3−xO₄ (x  0.23) with spinel structure was fabricated by ball milling of mixture of BaCO₃ and nonmagnetic α-Fe₂O₃ powders, and the molar ratio of BaCO₃ and α-Fe₂O₃ is 1:6. In the milling process, a mechanochemical reaction took place between BaCO₃ and α-Fe₂O₃, and Ba cation incorporated into α-Fe₂O₃ with rhombohedral structure to form a α-(Fe,Ba)₂O₃ solid solution. The Ba content in the α-(Fe,Ba)₂O₃ increased with increasing milling time, when the Ba content exceeded a limited solubility, the α-(Fe,Ba)₂O₃ transformed into a phase of Ba_xFe_3−xO₄ with spinel structure, where the Ba cation occupied an octahedral site or tetrahedral site. The product obtained in the balling process was different from that prepared in the annealing process at atmospheric pressure, which was BaFe₂O₄ with orthorhombic structure. Accompanying the crystal structure transition from α-(Fe,Ba)₂O₃ to Ba_xFe_3−xO₄, the magnetic properties also changed from nonmagnetism into ferromagnetism. The saturation magnetization was 53.3 emu/g and coercivity was 113.7 Oe. The mechanism of transitions of the crystal structure was discussed in the present work.     

Self-propagating high-temperature synthesis with post-heat treatment of La1−xSrxFeO3 (x = 0–1) perovskite as catalyst for soot combustion

La_1−xSr_xFeO₃ (x = 0–1) perovskite, Sr-substituted LaFeO₃, was prepared by Self-propagating high-temperature synthesis (SHS) and its catalytic activity for soot combustion was experimentally examined in comparison with that of a conventional Pt/Al₂O₃ catalyst. The products were also characterized by XRD, FE-SEM, and BET specific surface area. The XRD analysis revealed that all the products had a perovskite phase as the major compound, together with intermediate phases with higher x values (x = 0.7–1). The BET specific surface area of the products increased with x. Moreover, the catalytic activity for soot combustion also increased with x, wherein the BET specific surface area appeared an appropriate index for explaining the observed activity. The sample with x = 0.8 exhibited the highest activity for soot combustion among all the SHS products. The soot combustion temperature of this product was as much as 100 °C lower than that of non-catalytic soot combustion. In other words, it had the same activity as that at only 20 °C higher, in comparison to conventional Pt/Al₂O₃ catalyst. More significantly, average apparent activation energy of sample with x = 0.8 calculated by Friedman method using TG/DTA was approximately 15 kJ/mol lower than that of Pt/Al₂O₃ catalyst. This result suggested that La_1−xSr_xFeO₃ has the possibility to be an alternative catalyst to Pt/Al₂O₃ catalyst.     

Structures, electrical and thermal expansion properties of Sr-doped La2Mo2O9 oxide-ion conductors

The oxide-ion conductors (La_1−xSr_x)₂Mo₂O_9−δ (x = 0.01–0.08) were prepared by means of a conventional solid-state reaction. The effects of Sr doping for La site on the structures, electrical and thermal expansion properties of the oxide-ion conductor La₂Mo₂O₉ were investigated using X-ray diffraction, direct current four-probe method, thermal dilatometer and scanning electron microscopy, respectively. The results show that the lattice constants were first decreased, then increased, and decreased again with the increase of Sr doping content. The solid solubility of Sr in (La_1−xSr_x)₂Mo₂O_9−δ is x = 0.07. The sinterability of samples is markedly improved with the increase of Sr doping content. The sintered density of sample x > 0.07 is higher than 96% of its theoretical density. When x > 0.02, doping Sr in La₂Mo₂O₉ can inhibit the excessive growth of grains, thus increases the sintered density of samples. The structural transition temperature shifts to the low side with the increase of Sr doping content, and the phase transition is completely suppressed when the doping content reaches 0.07. The conductivity of sample increases with the increase of Sr doping content. The conductivity of sample x = 0.07 reaches a maximum of 0.078 S/cm and 0.101 S/cm at 800 °C and 850 °C, respectively. In this study, it was demonstrated that doping 7 mol% Sr for La site not only can completely suppress the structural phase transition in La₂Mo₂O₉, but also can effectively enhance electrical conductivity of samples at higher temperature.     

Thermoelectric properties of Sn1−x−yTiySbxO2 ceramics

Thermoelectric properties of Sn_1−x−yTi_y Sb_xO₂ ceramics were investigated in detail. The addition of Sb into SnO₂ matrix increased the electric conductivity, σ. The increase in the σ value should be caused by the increase in the carrier concentration. The Seebeck coefficients of all the samples were negative, which means that these samples have n-type conduction. The samples of this study have porous structure. The maximum Z value of all the samples measured in this study was 2.4 × 10⁻⁵ K⁻¹.     

Studies on structural and electrical properties of Co1−xNixFe1.9Mn0.1O4 ferrite

Nickel-doped iron-deficient cobalt ferrite with small amount of manganese having the chemical composition Co_1−xNi_xFe_1.9Mn_0.1O₄, with x = 0.2, 0.4, 0.6 and 0.8, were prepared by standard double sintering ceramic method. The spinel phase formation was confirmed by X-ray diffraction (XRD). The DC resistivity measurements with temperature indicate a semiconducting behavior showing a linear decrease with increasing temperature and the doping of Ni enhances the resistivity. Maximum resistivity of the order of 10⁹ Ω cm was found for composition x = 0.8. Room temperature dielectric constant measurements with frequency (100 Hz to 1 MHz), show usual dielectric dispersion. Also, the variation of room temperature AC conductivity as a function of frequency were studied and explained by using Maxwell–Wagner two-layer model. The studies on dielectric constant (′), loss tangent (tan δ) and AC conductivity (σ_AC), at four different frequencies (viz., 1, 10, 100 kHz and 1 MHz), with temperature were made.     

Investigation of the dependency of the upper critical magnetic field on the content x in Y1−xYbx/2Gdx/2Ba2Cu3O7−y superconducting structures

The Y_1−xYb_x/2Gd_x/2Ba₂Cu₃O_7−y superconducting samples for x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0 were prepared by using the solid-state reaction technique. Resistivity measurements of the samples were performed in QD–PPMS system under different magnetic fields up to 5 T in zero fields cooling regime. Using the resistivity data, the upper critical magnetic field H_c2(0) at T = 0 K for 50% of R_n was calculated by the extrapolation H_c2(T) to the temperature T = 0 K. The coherence length in T = 0 K were calculated from H_c2(0) and the effects of x in the composition on both the coherence length and the upper critical magnetic field were examined. The results showed that H_c2(0) varied from 84.05 to 122.26 T with the content x. The upper critical magnetic field in the temperature T = 0 K slightly decreased with increasing the content x. Using the content x, the upper critical magnetic field can be controlled and this can be used in the superconductivity applications.     

Influence of B site substituent Ti on the structure and thermophysical properties of A2B2O7-type pyrochlore Gd2Zr2O7

Since the structural integrity of A₂B₂O₇-type pyrochlores relies mostly on the interconnecting BO₆ octahedra, Ti⁴⁺ was selected to partially substitute Zr⁴⁺ in Gd₂Zr₂O₇ in order to distort the pyrochlore structure in order to improve the material’s thermophysical properties for potential use as high-temperature thermal insulation. As evidenced by X-ray diffraction and Raman spectroscopy studies, incorporation of Ti⁴⁺ simultaneously leads to long-range ordering of the pyrochlore structure as well as local lattice distortion. These two effects have been shown to be competitive in determining the crystal energy of the Gd₂(Zr_1−xTi_x)₂O₇ series and result in a minimum value of the Young’s modulus at x = 0.3 and a maximum value of the coefficient of thermal expansion at x = 0.2. At lower temperatures, the thermal conductivity of Gd₂Zr₂O₇ was significantly reduced by Ti⁴⁺ doping, and its composition dependence was accurately modeled by taking into account the phonon scattering by mass and strain fluctuations at the B site.     

Subsolidus phase relations of the SrO–Ta2O5–CuO system at 900 °C in air

The subsolidus phase relations of the SrO–Ta₂O₅–CuO system were investigated in air. The samples were equilibrated at 900 °C. The ternary oxide Sr₃Ta₂CuO₉ compound is stable under these conditions. This phase presents a solid solution range, its actual composition being Sr₃Ta_2−xCu_1+xO_9+δ with 0.0 ≤ x ≤ 0.2. Up to about 5 at.% Cu can be incorporated in the Sr_3−xTa_1+xO_5.5+δ phase. Similarities with the SrO–Nb₂O₅–CuO system are discussed.     

Structural and magnetic susceptibility studies of samarium substituted magnesium–zinc ferrites

Polycrystalline soft ferrites Mg_1−x–Zn_x–Fe_2−y–Sm_y–O₄ (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0; y = 0.0, 0.05 and 0.1) were prepared by usual ceramic method. The samples were characterized by X-ray diffraction and IR techniques. Magnetic properties have been studied from magnetization and (a)–(c) susceptibility measurements. The XRD patterns of all the samples reveal the formation of single-phase cubic spinel. The IR spectra show two strong absorption bands in the frequency range 300–800 cm⁻¹. The magnetization measurements exhibit the Neel's collinear ferrimagnetic behavior for x ≤ 0.2 and suggest non-collinear Y–K (Yaffet–Kittel) type magnetic ordering for x ≥ 0.4. The samples with x ≥ 0.8 are paramagnetic at and above the room temperature. Variation of ac susceptibility with temperature exhibit the single domain structure (SD) with x = 0.0 and multi-domain (MD) structure with x ≥ 0.2 on substitution of Zn²⁺ content. On substitution of Sm³⁺ content, the samples exhibit SD for x = 0.0, MD for x = 0.2 and MD to SP transition for x ≥ 0.4.     

Hydrogenation of CaLi2−xMgx (0 ≤ x ≤ 2) with C14 Laves phase structure

CaLi_2−xMg_x (0 ≤ x ≤ 2) which has the C14-type Laves phase structure has been successfully synthesized and hydrogenated. The C14-type Laves phase structure was kept after hydrogenation of CaLi_2−xMg_x (x = 0.2, 0.5, 1). After hydrogenation of CaLi₂ and CaMg₂, the Laves phase disappeared. The CaH₂ and LiH phases were formed from CaLi₂ and the CaH₂ and Mg phases from CaMg₂, respectively. CaLi_2−xMg_x (0 < x < 2) ternary alloys formed stable hydride phases with the C14-type Laves phase structure in contrast to CaLi₂ and CaMg₂ binary alloys.     

Crystallization kinetics of new compound of V2O5–PbO–Li2O–Fe2O3 glass using differential thermal analysis

Different glasses with nominal compositions of (70 − x)V₂O₅–xPbO–20Li₂O–10Fe₂O₃ (0 ≤ x ≤ 12.5 mol.%) were successfully obtained by the melt quenching technique. Crystallization kinetics of these glasses was studied under non-isothermal conditions using the formal theory of transformations for heterogeneous nucleation. The procedure was applied to the experimental data obtained by differential thermal analysis, using several measurements at different heating rates. In addition, from the heating rate dependence of the glass transition temperature, the glass transition activation energy was derived. The crystallization results are analyzed and both the activation energy of crystallization process and the crystallization mechanism are characterized in terms of Gao–Wang method. The phases at which the glass crystallizes after the thermal process have been identified by X-ray diffraction. The diffractogram of the transformed material indicates the presence of microcrystallites of LiV₁₅O_35.5, Pb₃(VO₄)₂ and PbO₂ beside the remaining an additional amorphous matrix.     

Study of ac impedance spectroscopy of Al doped MnFe2−2xAl2xO4

We have reported electrical properties of Al doped MnFe₂O₄ ferrite using ac impedance spectroscopy as a function of frequency (42 Hz to 5 MHz) at different temperatures (300–473 K). XRD analysis shows that all the compositions are single phase cubic spinel in structure. The complex impedance analysis has been used to separate the grain and grain boundary resistance of MnFe_2−2xAl_2xO₄. From the analysis of impedance spectra it is found that the real (Z′), and imaginary (Z″) part of the impedance decrease with increasing frequency and both are found to decrease with Al doping up to 20%, and thereafter, these increase with further increasing the Al concentration. Experimental results have been fitted with two parallel RC equivalent circuits in series.     

Formation of nanoparticles and nanorods via UV irradiation of AgNO3 solutions

The synthesis of silver nanoparticles via UV irradiation of AgNO₃ solutions was controlled by using UV–vis absorption spectra and TEM (transmission electron microscope) images. The UV–vis absorption method is good enough for the general control of synthesis process, and TEM images give us information about size of formed species. For investigated solutions of silver nitrate in ethanol and water, we observed formation of large nanoparticles (size about 100 nm) and nanorods (100 nm in length). Moreover, there was effort to confirm evidence of formation of these particles by using TOF mass spectrometer. Due to laser desorption/ionization process there is only evidence of small silver nanoparticles Ag_x, x ≤ 4 (clusters), and variety of silver compounds Ag_xN_yO_z (x ≤ 5, y ≤ 2, z ≤ 3).     

Analysis of the electrochemical reaction behavior of alloy AZ91 by EIS technique in H3PO4/KOH buffered K2SO4 solutions

The EIS technique was used to analyze the electrochemical reaction behavior of Alloy AZ91 in H₃PO₄/KOH buffered K₂SO₄ solution at pH 7. The corrosion resistance of Alloy AZ91 was directly related with the stability of Al₂O₃ · xH₂O rich part of the composite oxide/hydroxide layer on the alloy surface. The break down of the oxide layer was estimated to occur mainly on the matrix solid solution phase in Alloy AZ91. The mf capacitive loop arose from the relaxation of mass transport in the solid oxide phase in the presence of Al₂O₃ · xH₂O rich part and from Mg⁺ ion concentration within the broken area in the absence of Al₂O₃ · xH₂O rich part in the composite oxide structure on the alloy surface. The lf inductive loop had tendency of disappear when the dissolution rate of the alloy decreased as a result of the formation of the protective oxide layer.     

Synthesis and characterization of new pyrochlore solid solution Bi1.5Sb1.5Cu1−xMnxO7

A new pyrochlore solid solution with formula Bi_1.5Sb_1.5Cu_1−xMn_xO₇ has been synthesized using ceramic method at 1000 °C. The cell parameter decreases linearly with increasing manganese concentration. Rietveld refinements for (B_1.5Mn_0.5)(Sb_1.5Mn_0.5)O₇ compound using X-ray powder diffraction data confirmed an overall A₂B₂O₇ cubic pyrochlore structure with a = 10.42749 (4) Å and Fd-3m symmetry. The reliability factors are R_wp = 3.48%; R_p = 2.37%; R_exp = 1.65% and R_Bragg = 1.58%. The magnetic susceptibility measurements achieved between 4 and 300 K indicate a paramagnetic behaviour with an oxidation state “2+” of the manganese ion. The electric resistance measured using complex impedance spectroscopy method put in evidence a decrease of the electric resistance with the temperature, which reached 5 × 10² Ω at 675 K. Dielectric properties depend on the variation of frequency and temperature, results indicate a conductive compound.     

Studies on structural and thermal expansion properties of Ho2−xLnxMo4O15 (Ln = Er, Sm and Ce) solid solutions

Three new series of Ho_2−xEr_xMo₄O₁₅ (x = 0.0–2.0), Ho_2−xSm_xMo₄O₁₅ (x = 0.0–0.6) and Ho_2−xCe_xMo₄O₁₅ (x = 0.0–0.25) solid solutions have been prepared successfully by solid-state reaction and studied by powder X-ray diffraction. All the XRD patterns of these molybdates can be indexed in monoclinic space group P2₁/c. Lattice parameters a, b and c of Ho_2−xLn_xMo₄O₁₅ decrease linearly with increasing erbium content and increase with increasing samarium or cerium content. Thermal expansion behaviors of Ho_2−xLn_xMo₄O₁₅ have been investigated in the 25–500 °C temperature range with high-temperature X-ray diffraction. The temperature dependence of Mo(2)–O14 interaction looks like to be responsible for their thermal expansion behaviors.