MICROSTRUCTURE AND DECOMPOSITION OF RS Al-Fe-Cr-Zr ALLOY

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＡＮＤＤＥＣＯＭＰＯＳＩＴＩＯＮＯＦＲＳＡｌ－Ｆｅ－Ｃｒ－ＺｒＡＬＬＯＹ￥ＸｉａｏＹｕｄｅ；ＬｉＳｈｏｎｇｒｕｉ；ＸｉｅＹｏｎｇａｎ；ＸｕＹｉｈｅｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉ...     

MICROSTRUCTURES OF ULTRAFINE WC POWDERS

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＯＦＵＬＴＲＡＦＩＮＥＷＣＰＯＷＤＥＲＳＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＯＦＵＬＴＲＡＦＩＮＥＷＣＰＯＷＤＥＲＳ￥Ｓｕｎ，Ｘｉａｏｈｕａ；Ｗａｎｇ，Ｍｉｎｇｐｕ；Ｔｕ，Ｙｕａｎｊｕｎ；Ｚｅｎｇ，Ｚｈａｏｍｉｎｇ；Ｈｕ，Ｘｉ...     

CRYSTAL STRUCTURE OF A LONG－PERIOD ORDERED PHASE IN Fe－C MARTENSITE AND COMPUTER SIMULATION OF ITS ELECTRON DIFFRACTION PATTERNS

ＣＲＹＳＴＡＬＳＴＲＵＣＴＵＲＥＯＦＡＬＯＮＧ－ＰＥＲＩＯＤＯＲＤＥＲＥＤＰＨＡＳＥＩＮＦｅ－ＣＭＡＲＴＥＮＳＩＴＥＡＮＤＣＯＭＰＵＴＥＲＳＩＭＵＬＡＴＩＯＮＯＦＩＴＳＥＬＥＣＴＲＯＮＤＩＦＦＲＡＣＴＩＯＮＰＡＴＴＥＲＮＳＲＥＮＸｉａｏｂｉｎｇ；ＷＡ...     

KINETICS OF THERMAL DECOMPOSITION OF AMMONIUM THIOTUNGSTATE OF GRANULARITY 62～72 μm IN N_2

ＫＩＮＥＴＩＣＳＯＦＴＨＥＲＭＡＬＤＥＣＯＭＰＯＳＩＴＩＯＮＯＦＡＭＭＯＮＩＵＭＴＨＩＯＴＵＮＧＳＴＡＴＥＯＦＧＲＡＮＵＬＡＲＩＴＹ６２～７２μｍＩＮＮ_２ＸｉｎｇＰｅｎｇｆｅｉ；ＺｈａｉＹｕｃｈｕｎ；ＴｉａｎＹａｎｗｅｎ；ＣｈａｏＹｕｅｓｈｅｎｇ；?..     

EVOLUTION OF MICROSTRUCTURE IN OXIDATIVE GROWTH OF Al_2O_3／Al ALLOY COMPOSITES

ＥＶＯＬＵＴＩＯＮＯＦＭＩＣＲＯＳＴＲＵＣＴＵＲＥＩＮＯＸＩＤＡＴＩＶＥＧＲＯＷＴＨＯＦＡｌ_２Ｏ_３／ＡｌＡＬＬＯＹＣＯＭＰＯＳＩＴＥＳ￥ＸｉａＣｈａｎｇｑｉｎｇ；ＪｉｎＺｈａｎｐｅｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄ...     

CATALYTIC EFFECT OF FORMIC ACID UPON AMORPHOUS CHROMIUM ELECTRODEPOSITION

ＣＡＴＡＬＹＴＩＣＥＦＦＥＣＴＯＦＦＯＲＭＩＣＡＣＩＤＵＰＯＮＡＭＯＲＰＨＯＵＳＣＨＲＯＭＩＵＭＥＬＥＣＴＲＯＤＥＰＯＳＩＴＩＯＮＷａｎｇＸｉａｎｙｏｕ；ＪｉａｎｇＨａｎｙｉｎｇ；ＧｕｏＢｉｎｇｋｕｎ（ＩｎｓｔｉｔｕｔｅｏｆＭｅｔａｌｌｕｒｇｉｃａｌ...     

EFFECT OF MICROSTRUCTURES ON CYCLIC-OXIDATION BEHAVIOUR OF TiAl ALLOY

ＥＦＦＥＣＴＯＦＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＯＮＣＹＣＬＩＣ－ＯＸＩＤＡＴＩＯＮＢＥＨＡＶＩＯＵＲＯＦＴｉＡｌＡＬＬＯＹＺｈｏｕＫｅｃｈａｏ；ＨｕａｎｇＢａｉｙｕｎ；ＱｕＸｕａｎｈｕｉ；ＨｅＹｕｅｈｕｉ；ＫｏｎｇＧａｏｎｉｎｇ（ＰｏｗｄｅｒＭｅｔａ...     

ROOM-TEMPERATURE MECHANICAL PROPERTIES OF TiAl Ce ALLOYS

ＲＯＯＭ－ＴＥＭＰＥＲＡＴＵＲＥＭＥＣＨＡＮＩＣＡＬＰＲＯＰＥＲＴＩＥＳＯＦＴｉＡｌ＋ＣｅＡＬＬＯＹＳ￥ＣｈｅｎＳｈｉｑｉ；ＱｕＸｕａｎｈｕｉ；ＨｕａｎｇＢａｉｙｕｎ；ＬｅｉＣｈａｎｇｍｉｎｇ（ＰｏｗｄｅｒＭｅｔａｌｌｕｒｇｙＲｅｓｅａｒｃｈｉｎｓｔ...     

DEVELOPMENT OF A NEW GENERATION OF ADDITIVES FOR ALUMINIUM ROLLING LUBRICATION

ＤＥＶＥＬＯＰＭＥＮＴＯＦＡＮＥＷＧＥＮＥＲＡＴＩＯＮＯＦＡＤＤＩＴＩＶＥＳＦＯＲＡＬＵＭＩＮＩＵＭＲＯＬＬＩＮＧＬＵＢＲＩＣＡＴＩＯＮＭａｏＤａｈｅｎｇ；ＸｉａｏＧａｎｇ；ＭａＷｅｎｈｏｎｇ（ＣｏｌｌｅｇｅｏｆＥｌｅｃｔｒｏ－ｍｅｃｈａｎｉｃａｌＥ...     

EFFECTS OF TWO－STEP HEAT－TREATMENT ON MICROSTRUCTURE AND PROPERTIES OF TiAl INTERMETALLICS

ＥＦＦＥＣＴＳＯＦＴＷＯ－ＳＴＥＰＨＥＡＴ－ＴＲＥＡＴＭＥＮＴＯＮＭＩＣＲＯＳＴＲＵＣＴＵＲＥＡＮＤＰＲＯＰＥＲＴＩＥＳＯＦＴｉＡｌＩＮＴＥＲＭＥＴＡＬＬＩＣＳ￥Ｋｏｎｇ，Ｇａｏｎｉｎｇ；Ｈｕａｎｇ，Ｂａｉｙｕｎ；Ｑｕ，Ｘｕａｎｈｕｉ；Ｌｅｉ，Ｃｈａ...     

Al－Fe－V－Si快速凝固热强铝合金中“块状相”的产生条件

通过快凝试验和电镜观察，对Ａｌ－Ｆｅ－Ｖ－Ｓｉ合金中块状相的产生条件进行了分析．结果表明，合金中块状相产生的温度范围为１１７３－１１０３Ｋ，当熔体在该温度区间的冷却速度临界冷却速度，而快凝开始后的时形成块状相加微胞晶的快凝缺陷组织，当在整个快凝过程中时，则形成块状相加粗胞晶的快凝缺陷组织．     

原位生成TiC对快凝Al—Fe—V—Si合金中“块状相”生成的影响

对含有原位生成TiC粒子的快凝Al-Fe-V-Si合金中的显微结构进行了电镜观察。结果表明：在Al6Fe相形成的温度范围内,TiC粒子消除了初生Al6Fe块状相,诱发了初生AlmFe相,AlmFe相以包裹TiC粒子的形成生长成类球状形貌,消除了边角效应。并用连续冷却方式下的形核理论对TiC粒子的原位生成对合金中各相的形核动力学影响进行了分析与计算,与试验结果有较好的吻合。     

颗粒和晶须增强Al-Fe-V-Si复合材料的研究进展

分析了快速凝固／粉末冶金方法和喷射沉积方法两种工艺制备耐热铝合金的优缺点。对颗粒和晶须增强Al-Fe-V-Si复合材料的作用做了归纳和比较。     

快速凝固粉末冶金Mg_(80)Cu_(10)Y_(10)合金的组织与力学性能

采用快速凝固粉末冶金技术制备热挤压Mg_(80)Cu_(10)Y_(10)合金棒材,研究了快速凝固Mg_(80)Cu_(10)Y_(10)合金薄带及热挤压后合金的相结构,并对热处理工艺对合金棒材组织结构及力学性能的影响进行了分析.研究表明,采用单辊快速凝固法在辊速为1800 r/min下制备的Mg_(80)Cu_(10)Y_(10)合金薄带为完全非晶态;在热挤压过程中Mg_(80)Cu_(10)Y_(10)合金中有Mg_2Cu和Mg晶体相析出,其显微硬度比薄带有所提高,这与合金中细小Mg_2Cu颗粒的弥散析出有关;在450 ℃保温4 h后的热挤压Mg_(80)Cu_(10)Y_(10)合金中没有新相析出;随着热处理温度的升高或保温时间的延长,由于Mg_2Cu颗粒出现重溶及聚集长大现象,使得热挤压Mg_(80)Cu_(10)Y_(10)合金的显微硬度表现出逐渐下降的变化趋势.     

High temperature deformation behavior and mechanism of spray deposited A1-Fe-V-Si alloy

Al-8.5Fe-1.3V-1.7Si alloy was prepared by spray deposition and hot extrusion. The high temperature plastic deformation behavior of the spray deposited A1-8.SFe-1.3V-1.7Si alloy was investigated in the strain rate range of 2.77× 10^4-2.77×10^-2 s^-1 and temperature range of 350-550℃ by Gleebe-1500 thermomechanical simulator. The mechanism of the high temperature plastic deformation of the alloys was studied by TEM associated with the analysis of Rosler-Artz physical constitutive relationship based on the model of dislocation detaching from dispersion particles. The results show that A1-Fe-V-Si alloy has low strain hardening coefficient, and even exhibits work softening. Stress exponent n and activation energy Ω were calculated based on Zener-Hollomon relation and Rosler-Artz physical model respectively. The Rosler-Artz physical model can give a good prediction for the abnormal behavior of high temperature deformation of spray deposited A1-Fe-V-Si alloy, that is, n larger than 8 and Ω higher than 142 kJ/mol. However, because of the highly refined microstructure, the high temperature deformation behavior of spray deposited Al-Fe-V-Si alloy deviates more or less from the law predicted by using Rosler-Artz physical     

Rapidly solidified hypereutectic Al-Si alloys prepared by powder hot extrusion

Rapidly solidified hypereutectic Al-Si alloys were prepared by powder hot extrusion.By eliminating vacuum degassing procedure.the fabrication routine was simplified.The tensile fracture mechanisms at room temperature and elevated temperature were investigated by SEM fractography.Compared with KS282 casting material,the tensile strength of rapidly solidified Al-Si alloy is greatly improved due to silicon particles refining while its density and coefficient of thermal expansion are lower.than those of KS282.The wear resistance of RS AlSi is better than that of KS282.     

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF RAPIDLY SOLIDIFIED Al－Fe BASED ALLOYS

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＡＮＤＭＥＣＨＡＮＩＣＡＬＰＲＯＰＥＲＴＩＥＳＯＦＲＡＰＩＤＬＹＳＯＬＩＤＩＦＩＥＤＡｌ－ＦｅＢＡＳＥＤＡＬＬＯＹＳＷ．Ｊ．Ｐａｒｋ；Ｓ．Ａｈｎ；Ｒ．Ｓｃｈｍｅｅｓ；ａｎｄＮａｃｋＪ．Ｋｉｍ（１）（ＣｅｎｔｅｒｆｏｒＡｄｖ...     

深冷处理对Al-Fe-V-Si耐热铝合金力学性能的影响

研究了深冷处理对喷射沉积耐热铝合金8009的影响。结果表明，深冷处理合金的室温强度从405.9MPa rjymgc 453.4MPa，高温强度从196.8MPa提高到208.4MPa，同时晶体（111）面衍射明显加强。     

微量元素对快冷高硅铝合金粉末特性的影响

制备了含微量磷元素的Ａｌ２２Ｓｉ合金粉末。研究了粉末形貌、粒度大小与分布，以及粉末显微组织，并初步探讨了微量磷对合金粉末特性影响的机理。结果表明，微量磷元素降低了粉末氧含量。其中含０．０４％磷的快冷Ａｌ２２Ｓｉ合金粉末球形粉末较高，平均粒度最小，粉末中初晶硅得到了进一步细化。     

工艺参数对静液挤压2024铝合金纳米晶组织性能的影响

实验研究了以快速凝固和机械合金化复合工艺制备的２０２４ 铝合金纳米晶粉末为原料, 采用热静液挤压工艺在不同挤压工艺条件下固结成形的挤压态材料的显微组织与力学性能, 探讨了作为主要工艺参数的挤压温度和挤压比对材料组织性能的影响规律及其原因。在此基础上, 进一步确定了２０２４ 铝合金纳米晶粉末热静液挤压固结成形时的挤压温度与挤压比的合理取值范围