镁合金笔记本外壳温冲成形工艺参数对损伤因子的影响

引入Cockroft-Lathem韧性损伤准则,通过应用有限元技术模拟多组镁合金笔记本外壳薄板温冲成形方案的成形过程,同时计算损伤因子及分布,从而建立了一系列工艺参数对最大损伤因子的影响规律,并锁定两个角部为拉深成形最易破裂的区域.以追求损伤因子最小为目标得出了优化的工艺参数:成形温度250℃,压机速度4mm/s,摩擦因子0.09,压边力0.7MPa,凹模圆角半径5.1mm,凸凹模间隙1.15mm.     

工艺参数对TA0半球件冷拉深成形的影响规律

以TA0薄壁半球形零件冷拉深成形为研究对象,采用数值模拟与试验研究相结合的手段,在研究该拉伸成形过程中零件的应变及壁厚分布规律及组织演变规律的基础上,对破裂、起皱缺陷位置进行了预测。同时,采用正交试验分析方法,研究了单位压边力、摩擦系数、凹模圆角半径和凸凹模间隙等工艺参数,对该拉深成形过程的影响规律。结果表明,单位压边力、摩擦系数、凹模圆角半径对拉深过程均有显著影响,其中贡献率分别为凹模圆角半径41.04%,摩擦系数30.27%,压边力24.68%。     

工艺参数对TAO半球件冷拉深成形的影响规律

以TAO薄壁半球形零件冷拉深成形为研究对象,采用数值模拟与试验研究相结合的手段,在研究该拉伸成形过程中零件的应变及壁厚分布规律及组织演变规律的基础上,对破裂、起皱缺陷位置进行了预测.同时,采用正交试验分析方法,研究了单位压边力、摩擦系数、凹模圆角半径和凸凹模间隙等工艺参数,对该拉深成形过程的影响规律.结果表明,单位压边力、摩擦系数、凹模圆角半径对拉深过程均有显著影响,其中贡献率分别为凹模圆角半径41.04%,摩擦系数30.27%,压边力24.68%.     

DP590高强度板拉深成形应变路径规律研究

以某盒形件为例,以有限元分析软件Dynaform为平台,建立DP590高强度板拉深成形有限元模型,研究凸模圆角半径及摩擦系数对拉深成形应变路径的影响.结果表明:适当增大圆角尺寸可有效提高成形性能,增大摩擦系数减小材料流动,不利于高强度板的成形.     

方形盒制件圆角处拉深破裂的数值模拟

金属薄板成形的数值模拟技术在冲压件生产和模具设计中起着重要的作用。文章借助Dynaform软件对某方形盒制件拉深破裂现象进行数值模拟,分析其产生原因和影响因素,并利用正交实验找出防止该制件圆角破裂的拉深条件组合。结果表明,在冲压速度、凸模圆角半径、摩擦系数和板料厚度4个因素中,凸模圆角半径对盒形件拉深破裂的影响最大。为降低因圆角处板料剧烈减薄而产生破裂的几率,盒形件拉深时应采用较大的凸模圆角半径。     

抛物面形件拉深成形有限元分析与正交优化

分析了影响抛物面形件成形性能的主要因素:压边力、板厚、冲压速度、摩擦系数以及凹模圆角半径。借助Dynaform软件对抛物面形件拉深成形进行了单因素分析,得到了合理的压边力、板厚、摩擦系数和凹模圆角半径取值范围。采用正交实验方法进行了多因素的正交优化分析,得到了最优的参数组合。     

镁合金AZ31盒形件拉深成形有限元模拟分析

摘 要:利用有限元数值模拟分析了各工艺参数(拉深温度、凸模圆角半径及凹模内圆角半径)对镁合金AZ31盒形件拉深成形性能的影响,并通过实验进行了验证.结果表明:采用最佳拉深温度和最佳的凸模圆角半径、凹模内圆角半径可以有效地改善厚度为0.5mm的镁合金AZ31板材的拉深成形性能.     

板材冲压成形摩擦系数实时测量系统设计研究

为了准确的反映板材成形过程中摩擦系数的真实情况,构建板材冲压成形摩擦系数实时测量系统,通过改变凸模圆角半径、凸模拱高和模面曲率半径、拉深筋圆角半径等几何参数,利用有限元软件计算不同模具模面下板材冲压及胀形过程中材料流动的变化情况,得到了材料流动量随各种参数变化的规律曲线,并以此优化设计了板材拉深及胀形模具模面,确定了组合式特征传感器的安装位置,为板材成形摩擦系数实时测量平台的建立提供了指导依据.     

微拉深成形工艺及模具设计研究

利用实验研究和数值模拟分析相结合的方法来研究厚度为0.2 mm以下纯铜薄板的微拉深成形工艺及模具设计.通过一系列几何尺寸相似的杯形件的微拉深实验获得实验数据-成形力曲线;利用数值模拟研究了摩擦系数μ、相对模具间隙C/t和相对凹模圆角半径Rd/t对最大成形力的影响.研究表明,对最大成形力而言,摩擦系数μ的影响最为显著,而相对模具间隙C/t和相对凹模圆角半径Rd/t的影响在制造误差范围内不明显.在考虑摩擦条件的尺度效应的情况下,无量纲设计方式是一种比较有效的微拉深工艺及模具设计方法.     

Q235和1060中厚板多道次拉深旋压工艺研究

拉深旋压是旋压成形中最常用、最具有代表性的一种成形方式.简述了多道次拉深旋压成形的原理,介绍了MC2000型数控录返旋压机的控制特性,采用圆弧式旋轮(R70 mm,R10 mm)对Q235(4 mm,6 mm)和1060(9 mm)中厚板进行了多道次拉深成形试验和减薄旋压试验.结果表明,旋轮圆角半径越大越有利于金属的流动;在旋轮圆角半径一定的前提下,增大旋轮的进给速度,工件容易起皱;减薄试验显示Q235和1060板料减薄率分别达到了40%和50%.     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

新型的治疗阿尔茨海默氏症药物(1-二甲基磷酰基-2,2,2-三氯)-乙基-1-醇烟酸醋对体外神经细胞的作用

目的: 观察本实验室合成的一种治疗阿尔茨海默氏症(AD)的药物(1-二甲基磷酰基-2, 2, 2 -三氯)-乙基^-1-醇烟酸醋(NMF),对体外培养的皮层神经细胞活性的影响以及对海人藻酸(KA)所致的神经损伤的保护作用。方法: 采用体外培养皮层神经元的方法,解剖分离 15 d胚胎小鼠皮层神经细胞, 接种于 96孔板,48 h 后加药并培养 72 h,以 MIT 法 观察 NMF 对小鼠皮层神经细胞活性的影响;同时将接种于 24 孔板的细胞预先给予 NMF,d 3 时加或不加KA处理后,以台盼蓝染色鉴别并计数死、活细胞,可得出细胞的存活率。结果: NMF 明显促进胎鼠皮层神经元活性,其中 NMF1、0. 1、10nmol·L^-1促进神经元活性增殖率分别高达 34.7%、37.4%、36. 7%, NMF 明显促进正常胎鼠皮层神经元存活卒,与对照组比较,10nmol·L^-1 NMF 对皮层神经元的存活率分别提高 39.3%、73.5%。 NMF能显著 对抗 KA 所致的神经元损伤,与 KA 损伤组相比, NMF0.1、10、10nmol·L^-1对损伤皮层神经元的保护率分别为 77.30%、80.10%、84.15%。结论: NMF 明 显促进胎鼠皮层神经元的洁性、提高正常皮层神经元,的存活卒,并能有效地保护KA所致的神经元损伤,提示 NMF 是一种很有潜力的治疗 AD 的药物。     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Coherent second phase often exhibits anisotropic morphology with specifi c orientations with respect to both the second and the matrix phases. As a key feature of microstructure, the morphology of the coherent particles is essential for understanding the second-phase strengthening eff ect in various industrial alloys. This letter reports anisotropic growth of coherent ferrite from austenite matrix in pure iron based on molecular dynamics simulation. We found that the ferrite grain tends to grow into an elongated plate-like shape, independent of its initial confi guration. The fi nal shape of the ferrite is closely related to the misfi t between the two phases, with the longest direction and the broad facet of the plate being, respectively, consistent with the best matching direction and the best matching plane calculated via the Burgers vector content(BVC) method. The strain energy calculation in the framework of Eshelby's inclusion theory verifi es that the simulated orientation of the coherent ferrite is energetically favorable. It is anticipated that the BVC method will be applicable in analysis of anisotropic growth and morphology of coherent second phase in other phase transformation systems.     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

The Mirror with Patterns of Auspicious Animals and Grapes——Exquisite cast mirror and the technology of surface tin-enrichment by rubbing-in and infiltration of tin-rich powder

<正>Bronze mirrors were used by the Chinese people before the introduction of the glass mirror.Only after it was replaced by the glass mirror did the bronze mirror gradually retreat from people's lives.Different styles of bronze mirrors were made in different historical periods,particularly in the Warring States Period,the Han and Tang Dynasties,which were the three peaks of the development of bronze mirror arts in ancient China.The casting techniques were exquisite.The surface of the bronze mirror was smooth and bright enough to reflect one's image,and there were scarcely any casting defects on the mirror surface.On the back of the bronze mirror,there were rich depictions of Arts and Humanities,and the ornamentations were also     

The 9th China International Diecasting Congress & Exhibition

The 9th China International Diecasting Congress ＆ Exhibition was held on July 22-24, 2014 at Shanghai New International Expc Centre. This exhibition was the most successful over the years, with over 6890 visitors and 155 exhibitors, and the exhibition area increased by 30% from 9,500 square meters in 2012 to 12340 square meters. Die casting enterprises from a total of 24 countries and regions, including China mainland, Chinese Taiwan and Hong Kong, South Korea, Japan, Germany, India, Thailand, Malaysia, the United States, Russia, Australia, Iran, Ukraine, Brazil, Colombia, Singapore, Austria, Canada, Croatia, France, Turkey, United Kingdom, Vietnam, attended the congress and exhibition.     

Introduction of the Fluid Control Engineering Institute of Kunming University of Science and Technology

正The Fluid Control Engineering Institute of Kunming University of Science and Technology was set up in 1996.The researches of institute concentrate on electro-hydraulic(pneumatic)servo/proportional control and hydromechatronics.The Institute is committed to research and development of electro-hydraulic control of high-end technical equipment in ferrous metallurgy refining produc-     

RARE METALS Volume Contents

正~~