Gold nanoparticle effects in polymerase chain reaction: favoring of smaller products by polymerase adsorption

Gold nanoparticles were recently reported to reduce the formation of nonspecific products in polymerase chain reaction (PCR) at remarkably low temperatures, with hypothesized mechanisms including adsorption of DNA and heat-transfer enhancement. In contrast to these reports, we report that gold nanoparticles do not enhance the specificity of PCR but rather suppress the amplification of longer products while favoring amplification of shorter products, independent of specificity. Gold nanoparticles bearing a self-assembled monolayer of hexadecanethiol did not affect PCR, suggesting that surface interactions play an essential role. This role was further confirmed by experiments in which a similar effect on PCR was observed for the same total surface area of particles over a 100-fold range of per-particle surface area. The effect was seen with Taq and Tfl polymerases but not with Vent polymerase, and the effects of nanoparticles can be reversed by increasing the polymerase concentration or by adding bovine serum albumin (BSA). Transient high-temperature nanoparticle pre-exposure of PCR mix containing polymerase but not template or primers, followed by nanoparticle removal, modified subsequent nanoparticle-free PCR. Interaction between polymerase and gold nanoparticles was confirmed by changes in nanoparticle absorption spectrum and electrophoretic mobility in the presence of polymerase. Taken together, these results suggest that the nanoparticles nonspecifically adsorb polymerase, thus effectively reducing polymerase concentration.     

Polymerase chain reaction in high surface-to-volume ratio SiO2 microstructures

We have performed the Taqman beta-actin PCR system in high-surface-to-volume ratio (0.02-0.13 microm(-1)) SiO2 microchannels and observed the reaction yield and uniformity. The concentrations of the enzyme, magnesium chloride, and reaction template were varied in the reaction mix, and PCR amplification was performed in devices of various surface-to-volume ratios. We found that microchannels with higher surface-to-volume ratios required higher enzyme concentrations to achieve the same amplification efficiency. We investigated the possibility that the observed reaction nonuniformity was related to the specific adsorption of magnesium ions to the negatively charged SiO2 surface. The effect of several modifications to the reaction chemistry, the addition of the caged-magnesium dye DM-Nitrophen, the replacement of human DNA template with PCR product, and the coating of the microchannel surface with Teflon were all studied. These modifications resulted in improved reaction uniformity in the microchannels and present opportunities for further studies on enhancing the efficiency and uniformity of PCR in high surface-to-volume ratio SiO2 microchannels.     

Evaluation of gold nanoparticles as the additive in real-time polymerase chain reaction with SYBR Green I dye

Gold nanoparticles (AuNPs) have been proven to be able to improve the specificity or increase the efficiency of a polymerase chain reaction (PCR) when a suitable amount of AuNPs was used. However, there is still a lack of systematic evaluation of AuNPs in real-time PCR. In this study, DNA degradation and the fluorescence quenching effect of AuNPs were first tested in real-time PCR. Then two different kinds of Taq DNA polymerase, native and recombinant Taq polymerase, were employed to evaluate the AuNPs' effect on the threshold cycle (C(T)) values, standard curves and melting curves in real-time PCR. Different ratios of the amount of native Taq DNA polymerase to the amount of AuNPs were also tested. It was found that AuNPs could be applied in real-time PCR with correlation coefficient R(2)>0.989. The combination of 2.09?nM AuNPs with 3.75?U of native Taq DNA polymerase could make the amplification curves shift to the left and enhance the efficiency of the real-time PCR (0.628?39 without AuNPs compared with 0.717?89 with 2.09?nM AuNPs), thus enabling faster detection in comparison with those of control samples. However, no improvement ability of AuNPs was found in real-time PCR based on recombinant rTaq DNA polymerase. Besides, the results suggest that a complex interaction exists between AuNPs and native Taq DNA polymerase.     

One-pot polymerase chain reaction with gold nanoparticles for rapid and ultrasensitive DNA detection

We report a novel method for rapid, colorimetric detection of a specific deoxyribonucleic acid (DNA) sequence by carrying out a polymerase chain reaction in the presence of gold nanoparticles functionalized with two primers. Extension of the primers when the target DNA is present as a template during the polymerase chain reaction process affords the complementary sequences on the gold nanoparticle surfaces and results in the formation of gold nanoparticle aggregates with a concomitant color change from red to pinkish/purple. This method provides a convenient and straightforward solution for ultrasensitive DNA detection without any further post-treatment of the polymerase chain reaction products being necessary, and is a promising tool for rapid disease diagnostics and gene sequencing.     

PCR-核酸探针斑点杂交法检测痕量白斑综合征病毒(WSSV)

设计了2对引物用于检测对虾白斑综合征病毒(WSSV),外引物用于PCR扩增,内引物用于合成探针进行斑点杂交。结果表明,外引物PCR-电泳的检出极限为1pg WSSVDNA;PCR产物经内探针斑点杂交,可检出10fg的WSSV DNA;单纯的内探针斑点杂交只能检测出1ng以上的WSSV DNA。PCR-斑点杂交的检测灵敏度比PCR-电泳高2个数量级,比单纯斑点杂交高5个数量级。Southern杂交表明,PCR-斑点杂交检测WSSV特异可靠。该方法可用于痕量WSSV的检测。     

Electrochemistry-based real-time PCR on a microchip

The development of handheld instruments for point-of-care DNA analysis can potentially contribute to the medical diagnostics and environmental monitoring for decentralized applications. In this work, we demonstrate the implementation of a recently developed electrochemical real-time polymerase chain reaction (ERT-PCR) technique on a silicon-glass microchip for simultaneous DNA amplification and detection. This on-chip ERT-PCR process requires the extension of an oligonucleotide in both solution and at solid phases and intermittent electrochemical signal measurement in the presence of all the PCR reagents. Several important parameters, related to the surface passivation and electrochemical scanning of working electrodes, were investigated. It was found that the ERT-PCR's onset thermal cycle ( approximately 3-5), where the analytical signal begins to be distinguishable from the background, is much lower than that of the fluorescence-based counterparts for high template DNA situations (3 x 10(6) copies/microL). By carefully controlling the concentrations of the immobilized probe and the enzyme polymerase, improvements have been made in obtaining a meaningful electrochemical signal using a lower initial template concentration. This ERT-PCR technique on a microchip platform holds significant promise for rapid DNA detection for point-of-care testing applications.     

Fundamental study of the radiation monitoring system based on evaluation of DNA lesions

The biological dosemeter that measures biological responses to ionising radiation is useful for radiation protection. This paper presents the development and characterisation of a gamma ray irradiation dosimetry system based on real-time PCR (polymerase chain reaction) methodology. Real-time PCR is used to amplify and simultaneously quantify a targeted DNA molecule. If there are no limitations due to limiting substrates or reagents, at each extension step, the amount of DNA target is doubled, leading to exponential (geometric) amplification of the specific DNA fragment. The essential point of this assay is that DNA lesions caused by ionising radiation block DNA synthesis by DNA polymerase, resulting in a decrease in the amplification of a damaged DNA template compared with that of non-damaged DNA templates.     

Risk assessment of cadmium-contaminated soil on plant DNA damage using RAPD and physiological indices

Impact assessment of contaminants in soil is an important issue in environmental quality study and remediation of contaminated land. A random amplified polymorphic DNA (RAPD) 'fingerprinting' technique was exhibited to detect genotoxin-induced DNA damage of plants from heavy metal contaminated soil. This study compared the effects occurring at molecular and population levels in barley seedlings exposed to cadmium (Cd) contamination in soil. Results indicate that reduction of root growth and increase of total soluble protein level in the root tips of barley seedlings occurred with the ascending Cd concentrations. For the RAPD analyses, nine 10-base pair (bp) random RAPD primers (decamers) with 60-70% GC content were found to produce unique polymorphic band patterns and subsequently were used to produce a total of 129 RAPD fragments of 144-2639 base pair in molecular size in the root tips of control seedlings. Results produced from nine primers indicate that the changes occurring in RAPD profiles of the root tips following Cd treatment included alterations in band intensity as well as gain or loss of bands compared with the control seedlings. New amplified fragments at molecular size from approximately 154 to 2245 bp appeared almost for 10, 20 and 40 mg L(-1) Cd with 9 primers (one-four new polymerase chain reaction, (PCR) products), and the number of missing bands enhanced with the increasing Cd concentration for nine primers. These results suggest that genomic template stability reflecting changes in RAPD profiles were significantly affected and it compared favourably with the traditional indices such as growth and soluble protein level at the above Cd concentrations. The DNA polymorphisms detected by RAPD can be applied as a suitable biomarker assay for detection of the genotoxic effects of Cd stress in soil on plants. As a tool in risk assessment the RAPD assay can be used in characterisation of Cd hazard in soil.     

Quantum dots trigger hot-start effects for pfu-based polymerase chain reaction

Hot-start (HS) effects were investigated in pfu-based polymerase chain reaction (PCR), when water-soluble CdTe quantum dots (QDs) were introduced in the PCR system. The HS effects were demonstrated by the higher amplicon yields and excellent suppression of non-specific amplification after pre-incubation of PCR mix with QDs between 35°C and 56°C. DNA targets were well amplified even after PCR mixture was pre-incubated 1?h at 50°C. Importantly, the effects of QDs nanoparticles could be reversed by increasing the pfu polymerase concentration, suggesting that there was an interaction between QDs and pfu DNA polymerase. Moreover, control experiment indicated that HS effect is not primarily due to the reduced pfu polymerase concentration resulted from the above interaction. Fluorescence correlation spectroscopy (FCS), a single molecule detection method, was used to investigate the possible mechanism of HS PCR with QDs. Preliminary FCS results suggested that CdTe QDs may directly interact with pfu DNA polymerase, rather than other components in the PCR system. Furthermore, results demonstrated that the interaction between QDs and pfu resulted in a reduction in pfu polymerase concentration. This study provided a good start to investigate potential implications of QDs in other key molecular biology techniques.     

Electrochemical genosensor based on peptide nucleic acid-mediated PCR and asymmetric PCR techniques: Electrostatic interactions with a metal cation

The unique structure of peptide nucleic acids (PNAs), linking the N-(2-aminoethyl)glycine units that create a neutral backbone, and prevent it from acting as a primer for DNA polymerase, has been utilized in an electrochemical biosensor scheme for simple and sensitive detection of hybridization. When the PNA is targeted against a single-nucleotide polymorphism (SNP) or wild-type site on the gene, PNA-mediated polymerase chain reaction (PCR) clamping method effectively blocks the formation of a PCR product. In our report, PNA probe for PCR clamping was targeted against the wild-type site of alcohol dehydrogenase. The electrostatic interactions between the negatively charged DNA and neutral PNA molecules with redox-active metal cation cobalt(III)hexamine ([Co(NH3)6]3+) were monitored using differential pulse voltammetry. The electrostatic binding of [Co(NH3)6]3+ to DNA provided the basis for the discrimination against PNA/PNA, PNA/DNA, and DNA/DNA hybrid molecules. We have optimized the experimental conditions, such as probe concentration, [Co(NH3)6]3+ concentration, accumulation time for [Co(NH3)6]3+, and target concentration. A new pretreatment method has also been employed to allow fast and simple detection of hybridization reaction between the PCR amplicon and the probe on glassy carbon electrode (GCE) surface. This method was based on the application of a high-temperature treatment (95 degrees C, 5 min), followed by a 1-min incubation in the presence of DNA primers. The excess concentration of DNA primers prevented the rehybridization of the denatured strands, while enabling the target gene sequence to bind with the immobilized probe. Additionally, asymmetric PCR was employed to detect the presence of genetically modified organism in standard Roundup Ready soybean samples. The amplicons of asymmetric PCR, which were predominantly single-stranded DNA as a result of unequal primer concentration, hybridized with the DNA probe on the sensor surface efficiently. The attachment of long single-strands on GCE surface caused the accumulation of [Co(NH3)6]3+ and a high current response. Here, we report a versatile method that would allow for simple and rapid analysis of nucleic acids in combination with PNA-mediated PCR and asymmetric PCR techniques by using an electrochemical genosensor.     

Polymerase chain reaction coupling with magnetic nanoparticles-based biotin-avidin system for amplification of chemiluminescent detection signals of nucleic acid

A novel method was established through the detection of chemiluminescent signals of nucleic acid hybridization based on magnetic nanoparticles (MNPs) and PCR. 5' amino- modified specific probes were immobilized on the surface of silanized MNPs by Schiff reaction between amino and aldehyde group. The probes were used to capture the synthetic biotin-dUTP-labeled DNA fragments which were obtained by polymerase chain reaction (PCR). Then these complexes were bonded with streptavidin-modified alkaline phosphatase (SA-AP). Finally the chemiluminescent signals were detected by adding 3-(2'-spiroadamantane)- 4-methoxy -4-(3"-phosphoryloxy) phenyl-1, 2-dioxetane (AMPPD) which was the substrate reagent of AP. The concentration of probes which were immobilized on the surface of MNPs was studied, how to reduce the adsorption of SA-AP on the surface of MNPs was also researched. It was shown that 12.5 pmol of probes were immobilized on 1 mg of MNPs. Aldehyde-MNPs modified with probes could adsorb SA-AP, affecting the sensitivity of chemiluminescene consequently. Reduction of aldehyde group by sodium borohydride and blocking the bare position of MNPs with bovine serum albumin (BSA) could decrease the background of chemiluminescence, and this method has good specificity in detection of chloramphenicol acetyltransferase (CAT) gene.     

Quantitative analysis of double-stranded DNA amplified by a polymerase chain reaction employing surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) was utilized for the quantitative analysis of double-stranded (ds) DNA amplified by a polymerase chain reaction (PCR). 4?, 6-Diamidino-2-phenylindole dihydrochloride (DAPI), which intercalates into ds-DNA but does not form a complex with single-stranded (ss) DNA, was added to a DNA solution after amplification by PCR. When the solution was mixed, including ds-DNA-DAPI complexes and free DAPI with silver colloid sol, only free DAPI was adsorbed on the colloid surface. The dye on the colloid gave very intense SERS signals with excitation at 514.5 nm, whereas DAPI engaging in the intercalation with ds-DNA did not show any SERS signal. The SERS spectrum of DAPI on the colloid showed a strong band at 1610 cm(-1) due to the C?N stretching mode, and a linear relationship was observed between the peak intensity of the C?N stretching band and the concentration of free DAPI. Therefore one can determine the concentration of free DAPI by the SERS measurement. The more ds-DNA there is in the solution, the less free DAPI there is. Thus it is possible to quantitatively analyze the ds-DNA amplified by PCR indirectly by using SERS. The correlation coefficient between the peak intensity of the C?N stretching band and the concentration of ds-DNA amplified by PCR was calculated to be 0.988 for a concentration range from 0.1 to 1.3 mg/ml.     

Extraction of DNA from malaria-infected erythrocytes using isotachophoresis

We demonstrate a technique for purification of nucleic acids from malaria parasites infecting human erythrocytes using isotachophoresis (ITP). We release nucleic acids from malaria-infected erythrocytes by lysing with heat and proteinase K for 10 min and immediately, thereafter, load sample onto a capillary device. We study the effect of temperature on lysis efficiency. We also implement pressure-driven counterflow during ITP extraction to extend focusing time and increase nucleic acid yield. We show that the purified genomic DNA samples are compatible with polymerase chain reaction (PCR) and demonstrate a clinically relevant limit of detection of 0.5 parasites per nanoliter using quantitative PCR.     

SARS病毒特异性靶基因的多重PCR检测技术研究

本研究探讨了多重PCR技术在SARS病毒检测中的应用。根据香港中文大学在GenBank上公开发表的SARS病毒基因组cDNA序列,人工合成克隆特异性靶基因DNA片段,以此片段作为阳性样品,根据世界卫生组织推荐的进行单PCR与多重PCR检测分析。以单PCR法获得了121bp、182bp及302bp的靶基因片段3条;以二重PCR法获得了121bp+182bp、121bp+302bp与182b+302bp的靶基因片段组合;以二重PCR法获得了121bp+182bp+302bp的靶基因片段组合。结果表明:多重PCR技术可成功应用于SARS病毒的检测。     

Noncompetitive phage anti-immunocomplex real-time polymerase chain reaction for sensitive detection of small molecules

Immuno polymerase chain reaction (IPCR) is an analytical technology based on the excellent affinity and specificity of antibodies combined with the powerful signal amplification of polymerase chain reaction (PCR), providing superior sensitivity to classical immunoassays. Here we present a novel type of IPCR termed phage anti-immunocomplex assay real-time PCR (PHAIA-PCR) for the detection of small molecules. Our method utilizes a phage anti-immunocomplex assay (PHAIA) technology in which a short peptide loop displayed on the surface of the M13 bacteriophage binds specifically to the antibody-analyte complex, allowing the noncompetitive detection of small analytes. The phagemid DNA encoding this peptide can be amplified by PCR, and thus, this method eliminates hapten functionalization or bioconjugation of a DNA template while providing improved sensitivity. As a proof of concept, two PHAIA-PCRs were developed for the detection of 3-phenoxybenzoic acid, a major urinary metabolite of some pyrethroid insecticides, and molinate, a herbicide implicated in fish kills. Our results demonstrate that phage DNA can be a versatile material for IPCR development, enabling universal amplification when the common element of the phagemid is targeted or specific amplification when the real time PCR probe is designed to anneal the DNA encoding the peptide. The PHAIA-PCRs proved to be 10-fold more sensitive than conventional PHAIA and significantly faster using magnetic beads for rapid separation of reactants. The assay was validated with both agricultural drain water and human urine samples, showing its robustness for rapid monitoring of human exposure or environmental contamination.     

Gold nanoparticles with asymmetric polymerase chain reaction for colorimetric detection of DNA sequence

We developed a novel strategy for rapid colorimetric analysis of a specific DNA sequence by combining gold nanoparticles (AuNPs) with an asymmetric polymerase chain reaction (As-PCR). In the presence of the correct DNA template, the bound oligonucleotides on the surface of AuNPs selectively hybridized to form complementary sequences of single-stranded DNA (ssDNA) target generated from As-PCR. DNA hybridization resulted in self-assembly and aggregation of AuNPs, and a concomitant color change from ruby red to blue-purple occurred. This approach is simpler than previous methods, as it requires a simple mixture of the asymmetric PCR product with gold colloid conjugates. Thus, it is a convenient colorimetric method for specific nucleic acid sequence analysis with high specificity and sensitivity. Most importantly, the marked color change occurs at a picogram detection level after standing for several minutes at room temperature. Linear amplification minimizes the potential risk of PCR product cross-contamination. The efficiency to detect Bacillus anthracis in clinical samples clearly indicates the practical applicability of this approach.     

Block copolymer nanoparticles as nanobeads for the polymerase chain reaction

New sequencing technologies based on massively parallel signature sequencing (MPSS) have been developed to reduce the cost of genome sequencing. In some current MPSS platforms, DNA-modified micrometer-scale beads are used to template the polymerase chain reaction (PCR). Reducing the size of the beads to nanoscale can lead to significant improvements in sequencing throughput. To this end, we have assembled polymeric nanobeads that efficiently template PCR, resulting in DNA-decorated "nanobeads" with a high extent of functionalization.     

Interaction of gold nanoparticles with Pfu DNA polymerase and effect on polymerase chain reaction

The interaction of gold nanoparticles with Pfu DNA polymerase has been investigated by a number of biological, optical and electronic spectroscopic techniques. Polymerase chain reaction was performed to show gold nanoparticles' biological effect. Ultraviolet-visible and circular dichroism spectra analysis were applied to character the structure of Pfu DNA polymerase after conjugation with gold nanoparticles. X-ray photoelectron spectroscopy was used to investigate the bond properties of the polymerase-gold nanoparticles complex. The authors demonstrate that gold nanoparticles do not affect the amplification efficiency of polymerase chain reaction using Pfu DNA polymerase, and Pfu DNA polymerase displays no significant changes of the secondary structure upon interaction with gold nanoparticles. The adsorption of Pfu DNA polymerase to gold nanoparticles is mainly through Au-NH(2) bond and electrostatic interaction. These findings may have important implications regarding the safety issue as gold nanoparticles are widely used in biomedical applications.